treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / media / usb / gspca / m5602 / m5602_mt9m111.h
blob480afd4c9fc3b8751e4aa1e2dae8992744b2fb79
1 /* SPDX-License-Identifier: GPL-2.0-only */
2 /*
3 * Driver for the mt9m111 sensor
5 * Copyright (C) 2008 Erik Andrén
6 * Copyright (C) 2007 Ilyes Gouta. Based on the m5603x Linux Driver Project.
7 * Copyright (C) 2005 m5603x Linux Driver Project <m5602@x3ng.com.br>
9 * Portions of code to USB interface and ALi driver software,
10 * Copyright (c) 2006 Willem Duinker
11 * v4l2 interface modeled after the V4L2 driver
12 * for SN9C10x PC Camera Controllers
14 * Some defines taken from the mt9m111 sensor driver
15 * Copyright (C) 2008, Robert Jarzmik <robert.jarzmik@free.fr>
18 #ifndef M5602_MT9M111_H_
19 #define M5602_MT9M111_H_
21 #include "m5602_sensor.h"
23 /*****************************************************************************/
25 #define MT9M111_SC_CHIPVER 0x00
26 #define MT9M111_SC_ROWSTART 0x01
27 #define MT9M111_SC_COLSTART 0x02
28 #define MT9M111_SC_WINDOW_HEIGHT 0x03
29 #define MT9M111_SC_WINDOW_WIDTH 0x04
30 #define MT9M111_SC_HBLANK_CONTEXT_B 0x05
31 #define MT9M111_SC_VBLANK_CONTEXT_B 0x06
32 #define MT9M111_SC_HBLANK_CONTEXT_A 0x07
33 #define MT9M111_SC_VBLANK_CONTEXT_A 0x08
34 #define MT9M111_SC_SHUTTER_WIDTH 0x09
35 #define MT9M111_SC_ROW_SPEED 0x0a
36 #define MT9M111_SC_EXTRA_DELAY 0x0b
37 #define MT9M111_SC_SHUTTER_DELAY 0x0c
38 #define MT9M111_SC_RESET 0x0d
39 #define MT9M111_SC_R_MODE_CONTEXT_B 0x20
40 #define MT9M111_SC_R_MODE_CONTEXT_A 0x21
41 #define MT9M111_SC_FLASH_CONTROL 0x23
42 #define MT9M111_SC_GREEN_1_GAIN 0x2b
43 #define MT9M111_SC_BLUE_GAIN 0x2c
44 #define MT9M111_SC_RED_GAIN 0x2d
45 #define MT9M111_SC_GREEN_2_GAIN 0x2e
46 #define MT9M111_SC_GLOBAL_GAIN 0x2f
48 #define MT9M111_CONTEXT_CONTROL 0xc8
49 #define MT9M111_PAGE_MAP 0xf0
50 #define MT9M111_BYTEWISE_ADDRESS 0xf1
52 #define MT9M111_CP_OPERATING_MODE_CTL 0x06
53 #define MT9M111_CP_LUMA_OFFSET 0x34
54 #define MT9M111_CP_LUMA_CLIP 0x35
55 #define MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_A 0x3a
56 #define MT9M111_CP_LENS_CORRECTION_1 0x3b
57 #define MT9M111_CP_DEFECT_CORR_CONTEXT_A 0x4c
58 #define MT9M111_CP_DEFECT_CORR_CONTEXT_B 0x4d
59 #define MT9M111_CP_OUTPUT_FORMAT_CTL2_CONTEXT_B 0x9b
60 #define MT9M111_CP_GLOBAL_CLK_CONTROL 0xb3
62 #define MT9M111_CC_AUTO_EXPOSURE_PARAMETER_18 0x65
63 #define MT9M111_CC_AWB_PARAMETER_7 0x28
65 #define MT9M111_SENSOR_CORE 0x00
66 #define MT9M111_COLORPIPE 0x01
67 #define MT9M111_CAMERA_CONTROL 0x02
69 #define MT9M111_RESET (1 << 0)
70 #define MT9M111_RESTART (1 << 1)
71 #define MT9M111_ANALOG_STANDBY (1 << 2)
72 #define MT9M111_CHIP_ENABLE (1 << 3)
73 #define MT9M111_CHIP_DISABLE (0 << 3)
74 #define MT9M111_OUTPUT_DISABLE (1 << 4)
75 #define MT9M111_SHOW_BAD_FRAMES (1 << 0)
76 #define MT9M111_RESTART_BAD_FRAMES (1 << 1)
77 #define MT9M111_SYNCHRONIZE_CHANGES (1 << 7)
79 #define MT9M111_RMB_OVER_SIZED (1 << 0)
80 #define MT9M111_RMB_MIRROR_ROWS (1 << 0)
81 #define MT9M111_RMB_MIRROR_COLS (1 << 1)
82 #define MT9M111_RMB_ROW_SKIP_2X (1 << 2)
83 #define MT9M111_RMB_COLUMN_SKIP_2X (1 << 3)
84 #define MT9M111_RMB_ROW_SKIP_4X (1 << 4)
85 #define MT9M111_RMB_COLUMN_SKIP_4X (1 << 5)
87 #define MT9M111_COLOR_MATRIX_BYPASS (1 << 4)
88 #define MT9M111_SEL_CONTEXT_B (1 << 3)
90 #define MT9M111_TRISTATE_PIN_IN_STANDBY (1 << 1)
91 #define MT9M111_SOC_SOFT_STANDBY (1 << 0)
93 #define MT9M111_2D_DEFECT_CORRECTION_ENABLE (1 << 0)
95 #define INITIAL_MAX_GAIN 64
96 #define MT9M111_DEFAULT_GAIN 283
97 #define MT9M111_GREEN_GAIN_DEFAULT 0x20
98 #define MT9M111_BLUE_GAIN_DEFAULT 0x20
99 #define MT9M111_RED_GAIN_DEFAULT 0x20
101 /*****************************************************************************/
103 /* Kernel module parameters */
104 extern int force_sensor;
105 extern bool dump_sensor;
107 int mt9m111_probe(struct sd *sd);
108 int mt9m111_init(struct sd *sd);
109 int mt9m111_init_controls(struct sd *sd);
110 int mt9m111_start(struct sd *sd);
111 void mt9m111_disconnect(struct sd *sd);
113 static const struct m5602_sensor mt9m111 = {
114 .name = "MT9M111",
116 .i2c_slave_id = 0xba,
117 .i2c_regW = 2,
119 .probe = mt9m111_probe,
120 .init = mt9m111_init,
121 .init_controls = mt9m111_init_controls,
122 .disconnect = mt9m111_disconnect,
123 .start = mt9m111_start,
125 #endif