?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / media / usb / pvrusb2 / pvrusb2-hdw.c
blob1cfb7cf64131aa652f09f79b31a05b591aa3a9ad
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 *
4 * Copyright (C) 2005 Mike Isely <isely@pobox.com>
5 */
6
7 #include <linux/errno.h>
8 #include <linux/string.h>
9 #include <linux/slab.h>
10 #include <linux/module.h>
11 #include <linux/firmware.h>
12 #include <linux/videodev2.h>
13 #include <media/v4l2-common.h>
14 #include <media/tuner.h>
15 #include "pvrusb2.h"
16 #include "pvrusb2-std.h"
17 #include "pvrusb2-util.h"
18 #include "pvrusb2-hdw.h"
19 #include "pvrusb2-i2c-core.h"
20 #include "pvrusb2-eeprom.h"
21 #include "pvrusb2-hdw-internal.h"
22 #include "pvrusb2-encoder.h"
23 #include "pvrusb2-debug.h"
24 #include "pvrusb2-fx2-cmd.h"
25 #include "pvrusb2-wm8775.h"
26 #include "pvrusb2-video-v4l.h"
27 #include "pvrusb2-cx2584x-v4l.h"
28 #include "pvrusb2-cs53l32a.h"
29 #include "pvrusb2-audio.h"
30
31 #define TV_MIN_FREQ 55250000L
32 #define TV_MAX_FREQ 850000000L
33
34 /* This defines a minimum interval that the decoder must remain quiet
35 before we are allowed to start it running. */
36 #define TIME_MSEC_DECODER_WAIT 50
37
38 /* This defines a minimum interval that the decoder must be allowed to run
39 before we can safely begin using its streaming output. */
40 #define TIME_MSEC_DECODER_STABILIZATION_WAIT 300
41
42 /* This defines a minimum interval that the encoder must remain quiet
43 before we are allowed to configure it. */
44 #define TIME_MSEC_ENCODER_WAIT 50
45
46 /* This defines the minimum interval that the encoder must successfully run
47 before we consider that the encoder has run at least once since its
48 firmware has been loaded. This measurement is in important for cases
49 where we can't do something until we know that the encoder has been run
50 at least once. */
51 #define TIME_MSEC_ENCODER_OK 250
52
53 static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL};
54 static DEFINE_MUTEX(pvr2_unit_mtx);
55
56 static int ctlchg;
57 static int procreload;
58 static int tuner[PVR_NUM] = { [0 ... PVR_NUM-1] = -1 };
59 static int tolerance[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 };
60 static int video_std[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 };
61 static int init_pause_msec;
62
63 module_param(ctlchg, int, S_IRUGO|S_IWUSR);
64 MODULE_PARM_DESC(ctlchg, "0=optimize ctl change 1=always accept new ctl value");
65 module_param(init_pause_msec, int, S_IRUGO|S_IWUSR);
66 MODULE_PARM_DESC(init_pause_msec, "hardware initialization settling delay");
67 module_param(procreload, int, S_IRUGO|S_IWUSR);
68 MODULE_PARM_DESC(procreload,
69 "Attempt init failure recovery with firmware reload");
70 module_param_array(tuner, int, NULL, 0444);
71 MODULE_PARM_DESC(tuner,"specify installed tuner type");
72 module_param_array(video_std, int, NULL, 0444);
73 MODULE_PARM_DESC(video_std,"specify initial video standard");
74 module_param_array(tolerance, int, NULL, 0444);
75 MODULE_PARM_DESC(tolerance,"specify stream error tolerance");
76
77 /* US Broadcast channel 3 (61.25 MHz), to help with testing */
78 static int default_tv_freq = 61250000L;
79 /* 104.3 MHz, a usable FM station for my area */
80 static int default_radio_freq = 104300000L;
81
82 module_param_named(tv_freq, default_tv_freq, int, 0444);
83 MODULE_PARM_DESC(tv_freq, "specify initial television frequency");
84 module_param_named(radio_freq, default_radio_freq, int, 0444);
85 MODULE_PARM_DESC(radio_freq, "specify initial radio frequency");
86
87 #define PVR2_CTL_WRITE_ENDPOINT 0x01
88 #define PVR2_CTL_READ_ENDPOINT 0x81
89
90 #define PVR2_GPIO_IN 0x9008
91 #define PVR2_GPIO_OUT 0x900c
92 #define PVR2_GPIO_DIR 0x9020
93
94 #define trace_firmware(...) pvr2_trace(PVR2_TRACE_FIRMWARE,__VA_ARGS__)
95
96 #define PVR2_FIRMWARE_ENDPOINT 0x02
97
98 /* size of a firmware chunk */
99 #define FIRMWARE_CHUNK_SIZE 0x2000
100
101 typedef void (*pvr2_subdev_update_func)(struct pvr2_hdw *,
102 struct v4l2_subdev *);
103
104 static const pvr2_subdev_update_func pvr2_module_update_functions[] = {
105 [PVR2_CLIENT_ID_WM8775] = pvr2_wm8775_subdev_update,
106 [PVR2_CLIENT_ID_SAA7115] = pvr2_saa7115_subdev_update,
107 [PVR2_CLIENT_ID_MSP3400] = pvr2_msp3400_subdev_update,
108 [PVR2_CLIENT_ID_CX25840] = pvr2_cx25840_subdev_update,
109 [PVR2_CLIENT_ID_CS53L32A] = pvr2_cs53l32a_subdev_update,
110 };
111
112 static const char *module_names[] = {
113 [PVR2_CLIENT_ID_MSP3400] = "msp3400",
114 [PVR2_CLIENT_ID_CX25840] = "cx25840",
115 [PVR2_CLIENT_ID_SAA7115] = "saa7115",
116 [PVR2_CLIENT_ID_TUNER] = "tuner",
117 [PVR2_CLIENT_ID_DEMOD] = "tuner",
118 [PVR2_CLIENT_ID_CS53L32A] = "cs53l32a",
119 [PVR2_CLIENT_ID_WM8775] = "wm8775",
120 };
121
122
123 static const unsigned char *module_i2c_addresses[] = {
124 [PVR2_CLIENT_ID_TUNER] = "\x60\x61\x62\x63",
125 [PVR2_CLIENT_ID_DEMOD] = "\x43",
126 [PVR2_CLIENT_ID_MSP3400] = "\x40",
127 [PVR2_CLIENT_ID_SAA7115] = "\x21",
128 [PVR2_CLIENT_ID_WM8775] = "\x1b",
129 [PVR2_CLIENT_ID_CX25840] = "\x44",
130 [PVR2_CLIENT_ID_CS53L32A] = "\x11",
131 };
132
133
134 static const char *ir_scheme_names[] = {
135 [PVR2_IR_SCHEME_NONE] = "none",
136 [PVR2_IR_SCHEME_29XXX] = "29xxx",
137 [PVR2_IR_SCHEME_24XXX] = "24xxx (29xxx emulation)",
138 [PVR2_IR_SCHEME_24XXX_MCE] = "24xxx (MCE device)",
139 [PVR2_IR_SCHEME_ZILOG] = "Zilog",
140 };
141
142
143 /* Define the list of additional controls we'll dynamically construct based
144 on query of the cx2341x module. */
145 struct pvr2_mpeg_ids {
146 const char *strid;
147 int id;
148 };
149 static const struct pvr2_mpeg_ids mpeg_ids[] = {
150 {
151 .strid = "audio_layer",
152 .id = V4L2_CID_MPEG_AUDIO_ENCODING,
153 },{
154 .strid = "audio_bitrate",
155 .id = V4L2_CID_MPEG_AUDIO_L2_BITRATE,
156 },{
157 /* Already using audio_mode elsewhere :-( */
158 .strid = "mpeg_audio_mode",
159 .id = V4L2_CID_MPEG_AUDIO_MODE,
160 },{
161 .strid = "mpeg_audio_mode_extension",
162 .id = V4L2_CID_MPEG_AUDIO_MODE_EXTENSION,
163 },{
164 .strid = "audio_emphasis",
165 .id = V4L2_CID_MPEG_AUDIO_EMPHASIS,
166 },{
167 .strid = "audio_crc",
168 .id = V4L2_CID_MPEG_AUDIO_CRC,
169 },{
170 .strid = "video_aspect",
171 .id = V4L2_CID_MPEG_VIDEO_ASPECT,
172 },{
173 .strid = "video_b_frames",
174 .id = V4L2_CID_MPEG_VIDEO_B_FRAMES,
175 },{
176 .strid = "video_gop_size",
177 .id = V4L2_CID_MPEG_VIDEO_GOP_SIZE,
178 },{
179 .strid = "video_gop_closure",
180 .id = V4L2_CID_MPEG_VIDEO_GOP_CLOSURE,
181 },{
182 .strid = "video_bitrate_mode",
183 .id = V4L2_CID_MPEG_VIDEO_BITRATE_MODE,
184 },{
185 .strid = "video_bitrate",
186 .id = V4L2_CID_MPEG_VIDEO_BITRATE,
187 },{
188 .strid = "video_bitrate_peak",
189 .id = V4L2_CID_MPEG_VIDEO_BITRATE_PEAK,
190 },{
191 .strid = "video_temporal_decimation",
192 .id = V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION,
193 },{
194 .strid = "stream_type",
195 .id = V4L2_CID_MPEG_STREAM_TYPE,
196 },{
197 .strid = "video_spatial_filter_mode",
198 .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE,
199 },{
200 .strid = "video_spatial_filter",
201 .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
202 },{
203 .strid = "video_luma_spatial_filter_type",
204 .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE,
205 },{
206 .strid = "video_chroma_spatial_filter_type",
207 .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE,
208 },{
209 .strid = "video_temporal_filter_mode",
210 .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE,
211 },{
212 .strid = "video_temporal_filter",
213 .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER,
214 },{
215 .strid = "video_median_filter_type",
216 .id = V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE,
217 },{
218 .strid = "video_luma_median_filter_top",
219 .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP,
220 },{
221 .strid = "video_luma_median_filter_bottom",
222 .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM,
223 },{
224 .strid = "video_chroma_median_filter_top",
225 .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP,
226 },{
227 .strid = "video_chroma_median_filter_bottom",
228 .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM,
229 }
230 };
231 #define MPEGDEF_COUNT ARRAY_SIZE(mpeg_ids)
232
233
234 static const char *control_values_srate[] = {
235 [V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100] = "44.1 kHz",
236 [V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000] = "48 kHz",
237 [V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000] = "32 kHz",
238 };
239
240
241
242 static const char *control_values_input[] = {
243 [PVR2_CVAL_INPUT_TV] = "television", /*xawtv needs this name*/
244 [PVR2_CVAL_INPUT_DTV] = "dtv",
245 [PVR2_CVAL_INPUT_RADIO] = "radio",
246 [PVR2_CVAL_INPUT_SVIDEO] = "s-video",
247 [PVR2_CVAL_INPUT_COMPOSITE] = "composite",
248 };
249
250
251 static const char *control_values_audiomode[] = {
252 [V4L2_TUNER_MODE_MONO] = "Mono",
253 [V4L2_TUNER_MODE_STEREO] = "Stereo",
254 [V4L2_TUNER_MODE_LANG1] = "Lang1",
255 [V4L2_TUNER_MODE_LANG2] = "Lang2",
256 [V4L2_TUNER_MODE_LANG1_LANG2] = "Lang1+Lang2",
257 };
258
259
260 static const char *control_values_hsm[] = {
261 [PVR2_CVAL_HSM_FAIL] = "Fail",
262 [PVR2_CVAL_HSM_HIGH] = "High",
263 [PVR2_CVAL_HSM_FULL] = "Full",
264 };
265
266
267 static const char *pvr2_state_names[] = {
268 [PVR2_STATE_NONE] = "none",
269 [PVR2_STATE_DEAD] = "dead",
270 [PVR2_STATE_COLD] = "cold",
271 [PVR2_STATE_WARM] = "warm",
272 [PVR2_STATE_ERROR] = "error",
273 [PVR2_STATE_READY] = "ready",
274 [PVR2_STATE_RUN] = "run",
275 };
276
277
278 struct pvr2_fx2cmd_descdef {
279 unsigned char id;
280 unsigned char *desc;
281 };
282
283 static const struct pvr2_fx2cmd_descdef pvr2_fx2cmd_desc[] = {
284 {FX2CMD_MEM_WRITE_DWORD, "write encoder dword"},
285 {FX2CMD_MEM_READ_DWORD, "read encoder dword"},
286 {FX2CMD_HCW_ZILOG_RESET, "zilog IR reset control"},
287 {FX2CMD_MEM_READ_64BYTES, "read encoder 64bytes"},
288 {FX2CMD_REG_WRITE, "write encoder register"},
289 {FX2CMD_REG_READ, "read encoder register"},
290 {FX2CMD_MEMSEL, "encoder memsel"},
291 {FX2CMD_I2C_WRITE, "i2c write"},
292 {FX2CMD_I2C_READ, "i2c read"},
293 {FX2CMD_GET_USB_SPEED, "get USB speed"},
294 {FX2CMD_STREAMING_ON, "stream on"},
295 {FX2CMD_STREAMING_OFF, "stream off"},
296 {FX2CMD_FWPOST1, "fwpost1"},
297 {FX2CMD_POWER_OFF, "power off"},
298 {FX2CMD_POWER_ON, "power on"},
299 {FX2CMD_DEEP_RESET, "deep reset"},
300 {FX2CMD_GET_EEPROM_ADDR, "get rom addr"},
301 {FX2CMD_GET_IR_CODE, "get IR code"},
302 {FX2CMD_HCW_DEMOD_RESETIN, "hcw demod resetin"},
303 {FX2CMD_HCW_DTV_STREAMING_ON, "hcw dtv stream on"},
304 {FX2CMD_HCW_DTV_STREAMING_OFF, "hcw dtv stream off"},
305 {FX2CMD_ONAIR_DTV_STREAMING_ON, "onair dtv stream on"},
306 {FX2CMD_ONAIR_DTV_STREAMING_OFF, "onair dtv stream off"},
307 {FX2CMD_ONAIR_DTV_POWER_ON, "onair dtv power on"},
308 {FX2CMD_ONAIR_DTV_POWER_OFF, "onair dtv power off"},
309 {FX2CMD_HCW_DEMOD_RESET_PIN, "hcw demod reset pin"},
310 {FX2CMD_HCW_MAKO_SLEEP_PIN, "hcw mako sleep pin"},
311 };
312
313
314 static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v);
315 static void pvr2_hdw_state_sched(struct pvr2_hdw *);
316 static int pvr2_hdw_state_eval(struct pvr2_hdw *);
317 static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *,unsigned long);
318 static void pvr2_hdw_worker_poll(struct work_struct *work);
319 static int pvr2_hdw_wait(struct pvr2_hdw *,int state);
320 static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *);
321 static void pvr2_hdw_state_log_state(struct pvr2_hdw *);
322 static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl);
323 static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw);
324 static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw);
325 static void pvr2_hdw_quiescent_timeout(struct timer_list *);
326 static void pvr2_hdw_decoder_stabilization_timeout(struct timer_list *);
327 static void pvr2_hdw_encoder_wait_timeout(struct timer_list *);
328 static void pvr2_hdw_encoder_run_timeout(struct timer_list *);
329 static int pvr2_issue_simple_cmd(struct pvr2_hdw *,u32);
330 static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
331 unsigned int timeout,int probe_fl,
332 void *write_data,unsigned int write_len,
333 void *read_data,unsigned int read_len);
334 static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw);
335 static v4l2_std_id pvr2_hdw_get_detected_std(struct pvr2_hdw *hdw);
336
337 static void trace_stbit(const char *name,int val)
338 {
339 pvr2_trace(PVR2_TRACE_STBITS,
340 "State bit %s <-- %s",
341 name,(val ? "true" : "false"));
342 }
343
344 static int ctrl_channelfreq_get(struct pvr2_ctrl *cptr,int *vp)
345 {
346 struct pvr2_hdw *hdw = cptr->hdw;
347 if ((hdw->freqProgSlot > 0) && (hdw->freqProgSlot <= FREQTABLE_SIZE)) {
348 *vp = hdw->freqTable[hdw->freqProgSlot-1];
349 } else {
350 *vp = 0;
351 }
352 return 0;
353 }
354
355 static int ctrl_channelfreq_set(struct pvr2_ctrl *cptr,int m,int v)
356 {
357 struct pvr2_hdw *hdw = cptr->hdw;
358 unsigned int slotId = hdw->freqProgSlot;
359 if ((slotId > 0) && (slotId <= FREQTABLE_SIZE)) {
360 hdw->freqTable[slotId-1] = v;
361 /* Handle side effects correctly - if we're tuned to this
362 slot, then forgot the slot id relation since the stored
363 frequency has been changed. */
364 if (hdw->freqSelector) {
365 if (hdw->freqSlotRadio == slotId) {
366 hdw->freqSlotRadio = 0;
367 }
368 } else {
369 if (hdw->freqSlotTelevision == slotId) {
370 hdw->freqSlotTelevision = 0;
371 }
372 }
373 }
374 return 0;
375 }
376
377 static int ctrl_channelprog_get(struct pvr2_ctrl *cptr,int *vp)
378 {
379 *vp = cptr->hdw->freqProgSlot;
380 return 0;
381 }
382
383 static int ctrl_channelprog_set(struct pvr2_ctrl *cptr,int m,int v)
384 {
385 struct pvr2_hdw *hdw = cptr->hdw;
386 if ((v >= 0) && (v <= FREQTABLE_SIZE)) {
387 hdw->freqProgSlot = v;
388 }
389 return 0;
390 }
391
392 static int ctrl_channel_get(struct pvr2_ctrl *cptr,int *vp)
393 {
394 struct pvr2_hdw *hdw = cptr->hdw;
395 *vp = hdw->freqSelector ? hdw->freqSlotRadio : hdw->freqSlotTelevision;
396 return 0;
397 }
398
399 static int ctrl_channel_set(struct pvr2_ctrl *cptr,int m,int slotId)
400 {
401 unsigned freq = 0;
402 struct pvr2_hdw *hdw = cptr->hdw;
403 if ((slotId < 0) || (slotId > FREQTABLE_SIZE)) return 0;
404 if (slotId > 0) {
405 freq = hdw->freqTable[slotId-1];
406 if (!freq) return 0;
407 pvr2_hdw_set_cur_freq(hdw,freq);
408 }
409 if (hdw->freqSelector) {
410 hdw->freqSlotRadio = slotId;
411 } else {
412 hdw->freqSlotTelevision = slotId;
413 }
414 return 0;
415 }
416
417 static int ctrl_freq_get(struct pvr2_ctrl *cptr,int *vp)
418 {
419 *vp = pvr2_hdw_get_cur_freq(cptr->hdw);
420 return 0;
421 }
422
423 static int ctrl_freq_is_dirty(struct pvr2_ctrl *cptr)
424 {
425 return cptr->hdw->freqDirty != 0;
426 }
427
428 static void ctrl_freq_clear_dirty(struct pvr2_ctrl *cptr)
429 {
430 cptr->hdw->freqDirty = 0;
431 }
432
433 static int ctrl_freq_set(struct pvr2_ctrl *cptr,int m,int v)
434 {
435 pvr2_hdw_set_cur_freq(cptr->hdw,v);
436 return 0;
437 }
438
439 static int ctrl_cropl_min_get(struct pvr2_ctrl *cptr, int *left)
440 {
441 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
442 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
443 if (stat != 0) {
444 return stat;
445 }
446 *left = cap->bounds.left;
447 return 0;
448 }
449
450 static int ctrl_cropl_max_get(struct pvr2_ctrl *cptr, int *left)
451 {
452 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
453 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
454 if (stat != 0) {
455 return stat;
456 }
457 *left = cap->bounds.left;
458 if (cap->bounds.width > cptr->hdw->cropw_val) {
459 *left += cap->bounds.width - cptr->hdw->cropw_val;
460 }
461 return 0;
462 }
463
464 static int ctrl_cropt_min_get(struct pvr2_ctrl *cptr, int *top)
465 {
466 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
467 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
468 if (stat != 0) {
469 return stat;
470 }
471 *top = cap->bounds.top;
472 return 0;
473 }
474
475 static int ctrl_cropt_max_get(struct pvr2_ctrl *cptr, int *top)
476 {
477 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
478 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
479 if (stat != 0) {
480 return stat;
481 }
482 *top = cap->bounds.top;
483 if (cap->bounds.height > cptr->hdw->croph_val) {
484 *top += cap->bounds.height - cptr->hdw->croph_val;
485 }
486 return 0;
487 }
488
489 static int ctrl_cropw_max_get(struct pvr2_ctrl *cptr, int *width)
490 {
491 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
492 int stat, bleftend, cleft;
493
494 stat = pvr2_hdw_check_cropcap(cptr->hdw);
495 if (stat != 0) {
496 return stat;
497 }
498 bleftend = cap->bounds.left+cap->bounds.width;
499 cleft = cptr->hdw->cropl_val;
500
501 *width = cleft < bleftend ? bleftend-cleft : 0;
502 return 0;
503 }
504
505 static int ctrl_croph_max_get(struct pvr2_ctrl *cptr, int *height)
506 {
507 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
508 int stat, btopend, ctop;
509
510 stat = pvr2_hdw_check_cropcap(cptr->hdw);
511 if (stat != 0) {
512 return stat;
513 }
514 btopend = cap->bounds.top+cap->bounds.height;
515 ctop = cptr->hdw->cropt_val;
516
517 *height = ctop < btopend ? btopend-ctop : 0;
518 return 0;
519 }
520
521 static int ctrl_get_cropcapbl(struct pvr2_ctrl *cptr, int *val)
522 {
523 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
524 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
525 if (stat != 0) {
526 return stat;
527 }
528 *val = cap->bounds.left;
529 return 0;
530 }
531
532 static int ctrl_get_cropcapbt(struct pvr2_ctrl *cptr, int *val)
533 {
534 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
535 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
536 if (stat != 0) {
537 return stat;
538 }
539 *val = cap->bounds.top;
540 return 0;
541 }
542
543 static int ctrl_get_cropcapbw(struct pvr2_ctrl *cptr, int *val)
544 {
545 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
546 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
547 if (stat != 0) {
548 return stat;
549 }
550 *val = cap->bounds.width;
551 return 0;
552 }
553
554 static int ctrl_get_cropcapbh(struct pvr2_ctrl *cptr, int *val)
555 {
556 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
557 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
558 if (stat != 0) {
559 return stat;
560 }
561 *val = cap->bounds.height;
562 return 0;
563 }
564
565 static int ctrl_get_cropcapdl(struct pvr2_ctrl *cptr, int *val)
566 {
567 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
568 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
569 if (stat != 0) {
570 return stat;
571 }
572 *val = cap->defrect.left;
573 return 0;
574 }
575
576 static int ctrl_get_cropcapdt(struct pvr2_ctrl *cptr, int *val)
577 {
578 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
579 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
580 if (stat != 0) {
581 return stat;
582 }
583 *val = cap->defrect.top;
584 return 0;
585 }
586
587 static int ctrl_get_cropcapdw(struct pvr2_ctrl *cptr, int *val)
588 {
589 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
590 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
591 if (stat != 0) {
592 return stat;
593 }
594 *val = cap->defrect.width;
595 return 0;
596 }
597
598 static int ctrl_get_cropcapdh(struct pvr2_ctrl *cptr, int *val)
599 {
600 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
601 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
602 if (stat != 0) {
603 return stat;
604 }
605 *val = cap->defrect.height;
606 return 0;
607 }
608
609 static int ctrl_get_cropcappan(struct pvr2_ctrl *cptr, int *val)
610 {
611 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
612 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
613 if (stat != 0) {
614 return stat;
615 }
616 *val = cap->pixelaspect.numerator;
617 return 0;
618 }
619
620 static int ctrl_get_cropcappad(struct pvr2_ctrl *cptr, int *val)
621 {
622 struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
623 int stat = pvr2_hdw_check_cropcap(cptr->hdw);
624 if (stat != 0) {
625 return stat;
626 }
627 *val = cap->pixelaspect.denominator;
628 return 0;
629 }
630
631 static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp)
632 {
633 /* Actual maximum depends on the video standard in effect. */
634 if (cptr->hdw->std_mask_cur & V4L2_STD_525_60) {
635 *vp = 480;
636 } else {
637 *vp = 576;
638 }
639 return 0;
640 }
641
642 static int ctrl_vres_min_get(struct pvr2_ctrl *cptr,int *vp)
643 {
644 /* Actual minimum depends on device digitizer type. */
645 if (cptr->hdw->hdw_desc->flag_has_cx25840) {
646 *vp = 75;
647 } else {
648 *vp = 17;
649 }
650 return 0;
651 }
652
653 static int ctrl_get_input(struct pvr2_ctrl *cptr,int *vp)
654 {
655 *vp = cptr->hdw->input_val;
656 return 0;
657 }
658
659 static int ctrl_check_input(struct pvr2_ctrl *cptr,int v)
660 {
661 if (v < 0 || v > PVR2_CVAL_INPUT_MAX)
662 return 0;
663 return ((1UL << v) & cptr->hdw->input_allowed_mask) != 0;
664 }
665
666 static int ctrl_set_input(struct pvr2_ctrl *cptr,int m,int v)
667 {
668 return pvr2_hdw_set_input(cptr->hdw,v);
669 }
670
671 static int ctrl_isdirty_input(struct pvr2_ctrl *cptr)
672 {
673 return cptr->hdw->input_dirty != 0;
674 }
675
676 static void ctrl_cleardirty_input(struct pvr2_ctrl *cptr)
677 {
678 cptr->hdw->input_dirty = 0;
679 }
680
681
682 static int ctrl_freq_max_get(struct pvr2_ctrl *cptr, int *vp)
683 {
684 unsigned long fv;
685 struct pvr2_hdw *hdw = cptr->hdw;
686 if (hdw->tuner_signal_stale) {
687 pvr2_hdw_status_poll(hdw);
688 }
689 fv = hdw->tuner_signal_info.rangehigh;
690 if (!fv) {
691 /* Safety fallback */
692 *vp = TV_MAX_FREQ;
693 return 0;
694 }
695 if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) {
696 fv = (fv * 125) / 2;
697 } else {
698 fv = fv * 62500;
699 }
700 *vp = fv;
701 return 0;
702 }
703
704 static int ctrl_freq_min_get(struct pvr2_ctrl *cptr, int *vp)
705 {
706 unsigned long fv;
707 struct pvr2_hdw *hdw = cptr->hdw;
708 if (hdw->tuner_signal_stale) {
709 pvr2_hdw_status_poll(hdw);
710 }
711 fv = hdw->tuner_signal_info.rangelow;
712 if (!fv) {
713 /* Safety fallback */
714 *vp = TV_MIN_FREQ;
715 return 0;
716 }
717 if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) {
718 fv = (fv * 125) / 2;
719 } else {
720 fv = fv * 62500;
721 }
722 *vp = fv;
723 return 0;
724 }
725
726 static int ctrl_cx2341x_is_dirty(struct pvr2_ctrl *cptr)
727 {
728 return cptr->hdw->enc_stale != 0;
729 }
730
731 static void ctrl_cx2341x_clear_dirty(struct pvr2_ctrl *cptr)
732 {
733 cptr->hdw->enc_stale = 0;
734 cptr->hdw->enc_unsafe_stale = 0;
735 }
736
737 static int ctrl_cx2341x_get(struct pvr2_ctrl *cptr,int *vp)
738 {
739 int ret;
740 struct v4l2_ext_controls cs;
741 struct v4l2_ext_control c1;
742 memset(&cs,0,sizeof(cs));
743 memset(&c1,0,sizeof(c1));
744 cs.controls = &c1;
745 cs.count = 1;
746 c1.id = cptr->info->v4l_id;
747 ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state, 0, &cs,
748 VIDIOC_G_EXT_CTRLS);
749 if (ret) return ret;
750 *vp = c1.value;
751 return 0;
752 }
753
754 static int ctrl_cx2341x_set(struct pvr2_ctrl *cptr,int m,int v)
755 {
756 int ret;
757 struct pvr2_hdw *hdw = cptr->hdw;
758 struct v4l2_ext_controls cs;
759 struct v4l2_ext_control c1;
760 memset(&cs,0,sizeof(cs));
761 memset(&c1,0,sizeof(c1));
762 cs.controls = &c1;
763 cs.count = 1;
764 c1.id = cptr->info->v4l_id;
765 c1.value = v;
766 ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state,
767 hdw->state_encoder_run, &cs,
768 VIDIOC_S_EXT_CTRLS);
769 if (ret == -EBUSY) {
770 /* Oops. cx2341x is telling us it's not safe to change
771 this control while we're capturing. Make a note of this
772 fact so that the pipeline will be stopped the next time
773 controls are committed. Then go on ahead and store this
774 change anyway. */
775 ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state,
776 0, &cs,
777 VIDIOC_S_EXT_CTRLS);
778 if (!ret) hdw->enc_unsafe_stale = !0;
779 }
780 if (ret) return ret;
781 hdw->enc_stale = !0;
782 return 0;
783 }
784
785 static unsigned int ctrl_cx2341x_getv4lflags(struct pvr2_ctrl *cptr)
786 {
787 struct v4l2_queryctrl qctrl = {};
788 struct pvr2_ctl_info *info;
789 qctrl.id = cptr->info->v4l_id;
790 cx2341x_ctrl_query(&cptr->hdw->enc_ctl_state,&qctrl);
791 /* Strip out the const so we can adjust a function pointer. It's
792 OK to do this here because we know this is a dynamically created
793 control, so the underlying storage for the info pointer is (a)
794 private to us, and (b) not in read-only storage. Either we do
795 this or we significantly complicate the underlying control
796 implementation. */
797 info = (struct pvr2_ctl_info *)(cptr->info);
798 if (qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY) {
799 if (info->set_value) {
800 info->set_value = NULL;
801 }
802 } else {
803 if (!(info->set_value)) {
804 info->set_value = ctrl_cx2341x_set;
805 }
806 }
807 return qctrl.flags;
808 }
809
810 static int ctrl_streamingenabled_get(struct pvr2_ctrl *cptr,int *vp)
811 {
812 *vp = cptr->hdw->state_pipeline_req;
813 return 0;
814 }
815
816 static int ctrl_masterstate_get(struct pvr2_ctrl *cptr,int *vp)
817 {
818 *vp = cptr->hdw->master_state;
819 return 0;
820 }
821
822 static int ctrl_hsm_get(struct pvr2_ctrl *cptr,int *vp)
823 {
824 int result = pvr2_hdw_is_hsm(cptr->hdw);
825 *vp = PVR2_CVAL_HSM_FULL;
826 if (result < 0) *vp = PVR2_CVAL_HSM_FAIL;
827 if (result) *vp = PVR2_CVAL_HSM_HIGH;
828 return 0;
829 }
830
831 static int ctrl_stddetect_get(struct pvr2_ctrl *cptr, int *vp)
832 {
833 *vp = pvr2_hdw_get_detected_std(cptr->hdw);
834 return 0;
835 }
836
837 static int ctrl_stdavail_get(struct pvr2_ctrl *cptr,int *vp)
838 {
839 *vp = cptr->hdw->std_mask_avail;
840 return 0;
841 }
842
843 static int ctrl_stdavail_set(struct pvr2_ctrl *cptr,int m,int v)
844 {
845 struct pvr2_hdw *hdw = cptr->hdw;
846 v4l2_std_id ns;
847 ns = hdw->std_mask_avail;
848 ns = (ns & ~m) | (v & m);
849 if (ns == hdw->std_mask_avail) return 0;
850 hdw->std_mask_avail = ns;
851 hdw->std_info_cur.def.type_bitmask.valid_bits = hdw->std_mask_avail;
852 return 0;
853 }
854
855 static int ctrl_std_val_to_sym(struct pvr2_ctrl *cptr,int msk,int val,
856 char *bufPtr,unsigned int bufSize,
857 unsigned int *len)
858 {
859 *len = pvr2_std_id_to_str(bufPtr,bufSize,msk & val);
860 return 0;
861 }
862
863 static int ctrl_std_sym_to_val(struct pvr2_ctrl *cptr,
864 const char *bufPtr,unsigned int bufSize,
865 int *mskp,int *valp)
866 {
867 int ret;
868 v4l2_std_id id;
869 ret = pvr2_std_str_to_id(&id,bufPtr,bufSize);
870 if (ret < 0) return ret;
871 if (mskp) *mskp = id;
872 if (valp) *valp = id;
873 return 0;
874 }
875
876 static int ctrl_stdcur_get(struct pvr2_ctrl *cptr,int *vp)
877 {
878 *vp = cptr->hdw->std_mask_cur;
879 return 0;
880 }
881
882 static int ctrl_stdcur_set(struct pvr2_ctrl *cptr,int m,int v)
883 {
884 struct pvr2_hdw *hdw = cptr->hdw;
885 v4l2_std_id ns;
886 ns = hdw->std_mask_cur;
887 ns = (ns & ~m) | (v & m);
888 if (ns == hdw->std_mask_cur) return 0;
889 hdw->std_mask_cur = ns;
890 hdw->std_dirty = !0;
891 return 0;
892 }
893
894 static int ctrl_stdcur_is_dirty(struct pvr2_ctrl *cptr)
895 {
896 return cptr->hdw->std_dirty != 0;
897 }
898
899 static void ctrl_stdcur_clear_dirty(struct pvr2_ctrl *cptr)
900 {
901 cptr->hdw->std_dirty = 0;
902 }
903
904 static int ctrl_signal_get(struct pvr2_ctrl *cptr,int *vp)
905 {
906 struct pvr2_hdw *hdw = cptr->hdw;
907 pvr2_hdw_status_poll(hdw);
908 *vp = hdw->tuner_signal_info.signal;
909 return 0;
910 }
911
912 static int ctrl_audio_modes_present_get(struct pvr2_ctrl *cptr,int *vp)
913 {
914 int val = 0;
915 unsigned int subchan;
916 struct pvr2_hdw *hdw = cptr->hdw;
917 pvr2_hdw_status_poll(hdw);
918 subchan = hdw->tuner_signal_info.rxsubchans;
919 if (subchan & V4L2_TUNER_SUB_MONO) {
920 val |= (1 << V4L2_TUNER_MODE_MONO);
921 }
922 if (subchan & V4L2_TUNER_SUB_STEREO) {
923 val |= (1 << V4L2_TUNER_MODE_STEREO);
924 }
925 if (subchan & V4L2_TUNER_SUB_LANG1) {
926 val |= (1 << V4L2_TUNER_MODE_LANG1);
927 }
928 if (subchan & V4L2_TUNER_SUB_LANG2) {
929 val |= (1 << V4L2_TUNER_MODE_LANG2);
930 }
931 *vp = val;
932 return 0;
933 }
934
935
936 #define DEFINT(vmin,vmax) \
937 .type = pvr2_ctl_int, \
938 .def.type_int.min_value = vmin, \
939 .def.type_int.max_value = vmax
940
941 #define DEFENUM(tab) \
942 .type = pvr2_ctl_enum, \
943 .def.type_enum.count = ARRAY_SIZE(tab), \
944 .def.type_enum.value_names = tab
945
946 #define DEFBOOL \
947 .type = pvr2_ctl_bool
948
949 #define DEFMASK(msk,tab) \
950 .type = pvr2_ctl_bitmask, \
951 .def.type_bitmask.valid_bits = msk, \
952 .def.type_bitmask.bit_names = tab
953
954 #define DEFREF(vname) \
955 .set_value = ctrl_set_##vname, \
956 .get_value = ctrl_get_##vname, \
957 .is_dirty = ctrl_isdirty_##vname, \
958 .clear_dirty = ctrl_cleardirty_##vname
959
960
961 #define VCREATE_FUNCS(vname) \
962 static int ctrl_get_##vname(struct pvr2_ctrl *cptr,int *vp) \
963 {*vp = cptr->hdw->vname##_val; return 0;} \
964 static int ctrl_set_##vname(struct pvr2_ctrl *cptr,int m,int v) \
965 {cptr->hdw->vname##_val = v; cptr->hdw->vname##_dirty = !0; return 0;} \
966 static int ctrl_isdirty_##vname(struct pvr2_ctrl *cptr) \
967 {return cptr->hdw->vname##_dirty != 0;} \
968 static void ctrl_cleardirty_##vname(struct pvr2_ctrl *cptr) \
969 {cptr->hdw->vname##_dirty = 0;}
970
971 VCREATE_FUNCS(brightness)
972 VCREATE_FUNCS(contrast)
973 VCREATE_FUNCS(saturation)
974 VCREATE_FUNCS(hue)
975 VCREATE_FUNCS(volume)
976 VCREATE_FUNCS(balance)
977 VCREATE_FUNCS(bass)
978 VCREATE_FUNCS(treble)
979 VCREATE_FUNCS(mute)
980 VCREATE_FUNCS(cropl)
981 VCREATE_FUNCS(cropt)
982 VCREATE_FUNCS(cropw)
983 VCREATE_FUNCS(croph)
984 VCREATE_FUNCS(audiomode)
985 VCREATE_FUNCS(res_hor)
986 VCREATE_FUNCS(res_ver)
987 VCREATE_FUNCS(srate)
988
989 /* Table definition of all controls which can be manipulated */
990 static const struct pvr2_ctl_info control_defs[] = {
991 {
992 .v4l_id = V4L2_CID_BRIGHTNESS,
993 .desc = "Brightness",
994 .name = "brightness",
995 .default_value = 128,
996 DEFREF(brightness),
997 DEFINT(0,255),
998 },{
999 .v4l_id = V4L2_CID_CONTRAST,
1000 .desc = "Contrast",
1001 .name = "contrast",
1002 .default_value = 68,
1003 DEFREF(contrast),
1004 DEFINT(0,127),
1005 },{
1006 .v4l_id = V4L2_CID_SATURATION,
1007 .desc = "Saturation",
1008 .name = "saturation",
1009 .default_value = 64,
1010 DEFREF(saturation),
1011 DEFINT(0,127),
1012 },{
1013 .v4l_id = V4L2_CID_HUE,
1014 .desc = "Hue",
1015 .name = "hue",
1016 .default_value = 0,
1017 DEFREF(hue),
1018 DEFINT(-128,127),
1019 },{
1020 .v4l_id = V4L2_CID_AUDIO_VOLUME,
1021 .desc = "Volume",
1022 .name = "volume",
1023 .default_value = 62000,
1024 DEFREF(volume),
1025 DEFINT(0,65535),
1026 },{
1027 .v4l_id = V4L2_CID_AUDIO_BALANCE,
1028 .desc = "Balance",
1029 .name = "balance",
1030 .default_value = 0,
1031 DEFREF(balance),
1032 DEFINT(-32768,32767),
1033 },{
1034 .v4l_id = V4L2_CID_AUDIO_BASS,
1035 .desc = "Bass",
1036 .name = "bass",
1037 .default_value = 0,
1038 DEFREF(bass),
1039 DEFINT(-32768,32767),
1040 },{
1041 .v4l_id = V4L2_CID_AUDIO_TREBLE,
1042 .desc = "Treble",
1043 .name = "treble",
1044 .default_value = 0,
1045 DEFREF(treble),
1046 DEFINT(-32768,32767),
1047 },{
1048 .v4l_id = V4L2_CID_AUDIO_MUTE,
1049 .desc = "Mute",
1050 .name = "mute",
1051 .default_value = 0,
1052 DEFREF(mute),
1053 DEFBOOL,
1054 }, {
1055 .desc = "Capture crop left margin",
1056 .name = "crop_left",
1057 .internal_id = PVR2_CID_CROPL,
1058 .default_value = 0,
1059 DEFREF(cropl),
1060 DEFINT(-129, 340),
1061 .get_min_value = ctrl_cropl_min_get,
1062 .get_max_value = ctrl_cropl_max_get,
1063 .get_def_value = ctrl_get_cropcapdl,
1064 }, {
1065 .desc = "Capture crop top margin",
1066 .name = "crop_top",
1067 .internal_id = PVR2_CID_CROPT,
1068 .default_value = 0,
1069 DEFREF(cropt),
1070 DEFINT(-35, 544),
1071 .get_min_value = ctrl_cropt_min_get,
1072 .get_max_value = ctrl_cropt_max_get,
1073 .get_def_value = ctrl_get_cropcapdt,
1074 }, {
1075 .desc = "Capture crop width",
1076 .name = "crop_width",
1077 .internal_id = PVR2_CID_CROPW,
1078 .default_value = 720,
1079 DEFREF(cropw),
1080 DEFINT(0, 864),
1081 .get_max_value = ctrl_cropw_max_get,
1082 .get_def_value = ctrl_get_cropcapdw,
1083 }, {
1084 .desc = "Capture crop height",
1085 .name = "crop_height",
1086 .internal_id = PVR2_CID_CROPH,
1087 .default_value = 480,
1088 DEFREF(croph),
1089 DEFINT(0, 576),
1090 .get_max_value = ctrl_croph_max_get,
1091 .get_def_value = ctrl_get_cropcapdh,
1092 }, {
1093 .desc = "Capture capability pixel aspect numerator",
1094 .name = "cropcap_pixel_numerator",
1095 .internal_id = PVR2_CID_CROPCAPPAN,
1096 .get_value = ctrl_get_cropcappan,
1097 }, {
1098 .desc = "Capture capability pixel aspect denominator",
1099 .name = "cropcap_pixel_denominator",
1100 .internal_id = PVR2_CID_CROPCAPPAD,
1101 .get_value = ctrl_get_cropcappad,
1102 }, {
1103 .desc = "Capture capability bounds top",
1104 .name = "cropcap_bounds_top",
1105 .internal_id = PVR2_CID_CROPCAPBT,
1106 .get_value = ctrl_get_cropcapbt,
1107 }, {
1108 .desc = "Capture capability bounds left",
1109 .name = "cropcap_bounds_left",
1110 .internal_id = PVR2_CID_CROPCAPBL,
1111 .get_value = ctrl_get_cropcapbl,
1112 }, {
1113 .desc = "Capture capability bounds width",
1114 .name = "cropcap_bounds_width",
1115 .internal_id = PVR2_CID_CROPCAPBW,
1116 .get_value = ctrl_get_cropcapbw,
1117 }, {
1118 .desc = "Capture capability bounds height",
1119 .name = "cropcap_bounds_height",
1120 .internal_id = PVR2_CID_CROPCAPBH,
1121 .get_value = ctrl_get_cropcapbh,
1122 },{
1123 .desc = "Video Source",
1124 .name = "input",
1125 .internal_id = PVR2_CID_INPUT,
1126 .default_value = PVR2_CVAL_INPUT_TV,
1127 .check_value = ctrl_check_input,
1128 DEFREF(input),
1129 DEFENUM(control_values_input),
1130 },{
1131 .desc = "Audio Mode",
1132 .name = "audio_mode",
1133 .internal_id = PVR2_CID_AUDIOMODE,
1134 .default_value = V4L2_TUNER_MODE_STEREO,
1135 DEFREF(audiomode),
1136 DEFENUM(control_values_audiomode),
1137 },{
1138 .desc = "Horizontal capture resolution",
1139 .name = "resolution_hor",
1140 .internal_id = PVR2_CID_HRES,
1141 .default_value = 720,
1142 DEFREF(res_hor),
1143 DEFINT(19,720),
1144 },{
1145 .desc = "Vertical capture resolution",
1146 .name = "resolution_ver",
1147 .internal_id = PVR2_CID_VRES,
1148 .default_value = 480,
1149 DEFREF(res_ver),
1150 DEFINT(17,576),
1151 /* Hook in check for video standard and adjust maximum
1152 depending on the standard. */
1153 .get_max_value = ctrl_vres_max_get,
1154 .get_min_value = ctrl_vres_min_get,
1155 },{
1156 .v4l_id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ,
1157 .default_value = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000,
1158 .desc = "Audio Sampling Frequency",
1159 .name = "srate",
1160 DEFREF(srate),
1161 DEFENUM(control_values_srate),
1162 },{
1163 .desc = "Tuner Frequency (Hz)",
1164 .name = "frequency",
1165 .internal_id = PVR2_CID_FREQUENCY,
1166 .default_value = 0,
1167 .set_value = ctrl_freq_set,
1168 .get_value = ctrl_freq_get,
1169 .is_dirty = ctrl_freq_is_dirty,
1170 .clear_dirty = ctrl_freq_clear_dirty,
1171 DEFINT(0,0),
1172 /* Hook in check for input value (tv/radio) and adjust
1173 max/min values accordingly */
1174 .get_max_value = ctrl_freq_max_get,
1175 .get_min_value = ctrl_freq_min_get,
1176 },{
1177 .desc = "Channel",
1178 .name = "channel",
1179 .set_value = ctrl_channel_set,
1180 .get_value = ctrl_channel_get,
1181 DEFINT(0,FREQTABLE_SIZE),
1182 },{
1183 .desc = "Channel Program Frequency",
1184 .name = "freq_table_value",
1185 .set_value = ctrl_channelfreq_set,
1186 .get_value = ctrl_channelfreq_get,
1187 DEFINT(0,0),
1188 /* Hook in check for input value (tv/radio) and adjust
1189 max/min values accordingly */
1190 .get_max_value = ctrl_freq_max_get,
1191 .get_min_value = ctrl_freq_min_get,
1192 },{
1193 .desc = "Channel Program ID",
1194 .name = "freq_table_channel",
1195 .set_value = ctrl_channelprog_set,
1196 .get_value = ctrl_channelprog_get,
1197 DEFINT(0,FREQTABLE_SIZE),
1198 },{
1199 .desc = "Streaming Enabled",
1200 .name = "streaming_enabled",
1201 .get_value = ctrl_streamingenabled_get,
1202 DEFBOOL,
1203 },{
1204 .desc = "USB Speed",
1205 .name = "usb_speed",
1206 .get_value = ctrl_hsm_get,
1207 DEFENUM(control_values_hsm),
1208 },{
1209 .desc = "Master State",
1210 .name = "master_state",
1211 .get_value = ctrl_masterstate_get,
1212 DEFENUM(pvr2_state_names),
1213 },{
1214 .desc = "Signal Present",
1215 .name = "signal_present",
1216 .get_value = ctrl_signal_get,
1217 DEFINT(0,65535),
1218 },{
1219 .desc = "Audio Modes Present",
1220 .name = "audio_modes_present",
1221 .get_value = ctrl_audio_modes_present_get,
1222 /* For this type we "borrow" the V4L2_TUNER_MODE enum from
1223 v4l. Nothing outside of this module cares about this,
1224 but I reuse it in order to also reuse the
1225 control_values_audiomode string table. */
1226 DEFMASK(((1 << V4L2_TUNER_MODE_MONO)|
1227 (1 << V4L2_TUNER_MODE_STEREO)|
1228 (1 << V4L2_TUNER_MODE_LANG1)|
1229 (1 << V4L2_TUNER_MODE_LANG2)),
1230 control_values_audiomode),
1231 },{
1232 .desc = "Video Standards Available Mask",
1233 .name = "video_standard_mask_available",
1234 .internal_id = PVR2_CID_STDAVAIL,
1235 .skip_init = !0,
1236 .get_value = ctrl_stdavail_get,
1237 .set_value = ctrl_stdavail_set,
1238 .val_to_sym = ctrl_std_val_to_sym,
1239 .sym_to_val = ctrl_std_sym_to_val,
1240 .type = pvr2_ctl_bitmask,
1241 },{
1242 .desc = "Video Standards In Use Mask",
1243 .name = "video_standard_mask_active",
1244 .internal_id = PVR2_CID_STDCUR,
1245 .skip_init = !0,
1246 .get_value = ctrl_stdcur_get,
1247 .set_value = ctrl_stdcur_set,
1248 .is_dirty = ctrl_stdcur_is_dirty,
1249 .clear_dirty = ctrl_stdcur_clear_dirty,
1250 .val_to_sym = ctrl_std_val_to_sym,
1251 .sym_to_val = ctrl_std_sym_to_val,
1252 .type = pvr2_ctl_bitmask,
1253 },{
1254 .desc = "Video Standards Detected Mask",
1255 .name = "video_standard_mask_detected",
1256 .internal_id = PVR2_CID_STDDETECT,
1257 .skip_init = !0,
1258 .get_value = ctrl_stddetect_get,
1259 .val_to_sym = ctrl_std_val_to_sym,
1260 .sym_to_val = ctrl_std_sym_to_val,
1261 .type = pvr2_ctl_bitmask,
1262 }
1263 };
1264
1265 #define CTRLDEF_COUNT ARRAY_SIZE(control_defs)
1266
1267
1268 const char *pvr2_config_get_name(enum pvr2_config cfg)
1269 {
1270 switch (cfg) {
1271 case pvr2_config_empty: return "empty";
1272 case pvr2_config_mpeg: return "mpeg";
1273 case pvr2_config_vbi: return "vbi";
1274 case pvr2_config_pcm: return "pcm";
1275 case pvr2_config_rawvideo: return "raw video";
1276 }
1277 return "<unknown>";
1278 }
1279
1280
1281 struct usb_device *pvr2_hdw_get_dev(struct pvr2_hdw *hdw)
1282 {
1283 return hdw->usb_dev;
1284 }
1285
1286
1287 unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *hdw)
1288 {
1289 return hdw->serial_number;
1290 }
1291
1292
1293 const char *pvr2_hdw_get_bus_info(struct pvr2_hdw *hdw)
1294 {
1295 return hdw->bus_info;
1296 }
1297
1298
1299 const char *pvr2_hdw_get_device_identifier(struct pvr2_hdw *hdw)
1300 {
1301 return hdw->identifier;
1302 }
1303
1304
1305 unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *hdw)
1306 {
1307 return hdw->freqSelector ? hdw->freqValTelevision : hdw->freqValRadio;
1308 }
1309
1310 /* Set the currently tuned frequency and account for all possible
1311 driver-core side effects of this action. */
1312 static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *hdw,unsigned long val)
1313 {
1314 if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
1315 if (hdw->freqSelector) {
1316 /* Swing over to radio frequency selection */
1317 hdw->freqSelector = 0;
1318 hdw->freqDirty = !0;
1319 }
1320 if (hdw->freqValRadio != val) {
1321 hdw->freqValRadio = val;
1322 hdw->freqSlotRadio = 0;
1323 hdw->freqDirty = !0;
1324 }
1325 } else {
1326 if (!(hdw->freqSelector)) {
1327 /* Swing over to television frequency selection */
1328 hdw->freqSelector = 1;
1329 hdw->freqDirty = !0;
1330 }
1331 if (hdw->freqValTelevision != val) {
1332 hdw->freqValTelevision = val;
1333 hdw->freqSlotTelevision = 0;
1334 hdw->freqDirty = !0;
1335 }
1336 }
1337 }
1338
1339 int pvr2_hdw_get_unit_number(struct pvr2_hdw *hdw)
1340 {
1341 return hdw->unit_number;
1342 }
1343
1344
1345 /* Attempt to locate one of the given set of files. Messages are logged
1346 appropriate to what has been found. The return value will be 0 or
1347 greater on success (it will be the index of the file name found) and
1348 fw_entry will be filled in. Otherwise a negative error is returned on
1349 failure. If the return value is -ENOENT then no viable firmware file
1350 could be located. */
1351 static int pvr2_locate_firmware(struct pvr2_hdw *hdw,
1352 const struct firmware **fw_entry,
1353 const char *fwtypename,
1354 unsigned int fwcount,
1355 const char *fwnames[])
1356 {
1357 unsigned int idx;
1358 int ret = -EINVAL;
1359 for (idx = 0; idx < fwcount; idx++) {
1360 ret = request_firmware(fw_entry,
1361 fwnames[idx],
1362 &hdw->usb_dev->dev);
1363 if (!ret) {
1364 trace_firmware("Located %s firmware: %s; uploading...",
1365 fwtypename,
1366 fwnames[idx]);
1367 return idx;
1368 }
1369 if (ret == -ENOENT) continue;
1370 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1371 "request_firmware fatal error with code=%d",ret);
1372 return ret;
1373 }
1374 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1375 "***WARNING*** Device %s firmware seems to be missing.",
1376 fwtypename);
1377 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1378 "Did you install the pvrusb2 firmware files in their proper location?");
1379 if (fwcount == 1) {
1380 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1381 "request_firmware unable to locate %s file %s",
1382 fwtypename,fwnames[0]);
1383 } else {
1384 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1385 "request_firmware unable to locate one of the following %s files:",
1386 fwtypename);
1387 for (idx = 0; idx < fwcount; idx++) {
1388 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1389 "request_firmware: Failed to find %s",
1390 fwnames[idx]);
1391 }
1392 }
1393 return ret;
1394 }
1395
1396
1397 /*
1398 * pvr2_upload_firmware1().
1399 *
1400 * Send the 8051 firmware to the device. After the upload, arrange for
1401 * device to re-enumerate.
1402 *
1403 * NOTE : the pointer to the firmware data given by request_firmware()
1404 * is not suitable for an usb transaction.
1405 *
1406 */
1407 static int pvr2_upload_firmware1(struct pvr2_hdw *hdw)
1408 {
1409 const struct firmware *fw_entry = NULL;
1410 void *fw_ptr;
1411 unsigned int pipe;
1412 unsigned int fwsize;
1413 int ret;
1414 u16 address;
1415
1416 if (!hdw->hdw_desc->fx2_firmware.cnt) {
1417 hdw->fw1_state = FW1_STATE_OK;
1418 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1419 "Connected device type defines no firmware to upload; ignoring firmware");
1420 return -ENOTTY;
1421 }
1422
1423 hdw->fw1_state = FW1_STATE_FAILED; // default result
1424
1425 trace_firmware("pvr2_upload_firmware1");
1426
1427 ret = pvr2_locate_firmware(hdw,&fw_entry,"fx2 controller",
1428 hdw->hdw_desc->fx2_firmware.cnt,
1429 hdw->hdw_desc->fx2_firmware.lst);
1430 if (ret < 0) {
1431 if (ret == -ENOENT) hdw->fw1_state = FW1_STATE_MISSING;
1432 return ret;
1433 }
1434
1435 usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f));
1436
1437 pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
1438 fwsize = fw_entry->size;
1439
1440 if ((fwsize != 0x2000) &&
1441 (!(hdw->hdw_desc->flag_fx2_16kb && (fwsize == 0x4000)))) {
1442 if (hdw->hdw_desc->flag_fx2_16kb) {
1443 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1444 "Wrong fx2 firmware size (expected 8192 or 16384, got %u)",
1445 fwsize);
1446 } else {
1447 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1448 "Wrong fx2 firmware size (expected 8192, got %u)",
1449 fwsize);
1450 }
1451 release_firmware(fw_entry);
1452 return -ENOMEM;
1453 }
1454
1455 fw_ptr = kmalloc(0x800, GFP_KERNEL);
1456 if (fw_ptr == NULL){
1457 release_firmware(fw_entry);
1458 return -ENOMEM;
1459 }
1460
1461 /* We have to hold the CPU during firmware upload. */
1462 pvr2_hdw_cpureset_assert(hdw,1);
1463
1464 /* upload the firmware to address 0000-1fff in 2048 (=0x800) bytes
1465 chunk. */
1466
1467 ret = 0;
1468 for (address = 0; address < fwsize; address += 0x800) {
1469 memcpy(fw_ptr, fw_entry->data + address, 0x800);
1470 ret += usb_control_msg(hdw->usb_dev, pipe, 0xa0, 0x40, address,
1471 0, fw_ptr, 0x800, HZ);
1472 }
1473
1474 trace_firmware("Upload done, releasing device's CPU");
1475
1476 /* Now release the CPU. It will disconnect and reconnect later. */
1477 pvr2_hdw_cpureset_assert(hdw,0);
1478
1479 kfree(fw_ptr);
1480 release_firmware(fw_entry);
1481
1482 trace_firmware("Upload done (%d bytes sent)",ret);
1483
1484 /* We should have written fwsize bytes */
1485 if (ret == fwsize) {
1486 hdw->fw1_state = FW1_STATE_RELOAD;
1487 return 0;
1488 }
1489
1490 return -EIO;
1491 }
1492
1493
1494 /*
1495 * pvr2_upload_firmware2()
1496 *
1497 * This uploads encoder firmware on endpoint 2.
1498 *
1499 */
1500
1501 int pvr2_upload_firmware2(struct pvr2_hdw *hdw)
1502 {
1503 const struct firmware *fw_entry = NULL;
1504 void *fw_ptr;
1505 unsigned int pipe, fw_len, fw_done, bcnt, icnt;
1506 int actual_length;
1507 int ret = 0;
1508 int fwidx;
1509 static const char *fw_files[] = {
1510 CX2341X_FIRM_ENC_FILENAME,
1511 };
1512
1513 if (hdw->hdw_desc->flag_skip_cx23416_firmware) {
1514 return 0;
1515 }
1516
1517 trace_firmware("pvr2_upload_firmware2");
1518
1519 ret = pvr2_locate_firmware(hdw,&fw_entry,"encoder",
1520 ARRAY_SIZE(fw_files), fw_files);
1521 if (ret < 0) return ret;
1522 fwidx = ret;
1523 ret = 0;
1524 /* Since we're about to completely reinitialize the encoder,
1525 invalidate our cached copy of its configuration state. Next
1526 time we configure the encoder, then we'll fully configure it. */
1527 hdw->enc_cur_valid = 0;
1528
1529 /* Encoder is about to be reset so note that as far as we're
1530 concerned now, the encoder has never been run. */
1531 del_timer_sync(&hdw->encoder_run_timer);
1532 if (hdw->state_encoder_runok) {
1533 hdw->state_encoder_runok = 0;
1534 trace_stbit("state_encoder_runok",hdw->state_encoder_runok);
1535 }
1536
1537 /* First prepare firmware loading */
1538 ret |= pvr2_write_register(hdw, 0x0048, 0xffffffff); /*interrupt mask*/
1539 ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000088); /*gpio dir*/
1540 ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/
1541 ret |= pvr2_hdw_cmd_deep_reset(hdw);
1542 ret |= pvr2_write_register(hdw, 0xa064, 0x00000000); /*APU command*/
1543 ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000408); /*gpio dir*/
1544 ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/
1545 ret |= pvr2_write_register(hdw, 0x9058, 0xffffffed); /*VPU ctrl*/
1546 ret |= pvr2_write_register(hdw, 0x9054, 0xfffffffd); /*reset hw blocks*/
1547 ret |= pvr2_write_register(hdw, 0x07f8, 0x80000800); /*encoder SDRAM refresh*/
1548 ret |= pvr2_write_register(hdw, 0x07fc, 0x0000001a); /*encoder SDRAM pre-charge*/
1549 ret |= pvr2_write_register(hdw, 0x0700, 0x00000000); /*I2C clock*/
1550 ret |= pvr2_write_register(hdw, 0xaa00, 0x00000000); /*unknown*/
1551 ret |= pvr2_write_register(hdw, 0xaa04, 0x00057810); /*unknown*/
1552 ret |= pvr2_write_register(hdw, 0xaa10, 0x00148500); /*unknown*/
1553 ret |= pvr2_write_register(hdw, 0xaa18, 0x00840000); /*unknown*/
1554 ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_FWPOST1);
1555 ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16));
1556
1557 if (ret) {
1558 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1559 "firmware2 upload prep failed, ret=%d",ret);
1560 release_firmware(fw_entry);
1561 goto done;
1562 }
1563
1564 /* Now send firmware */
1565
1566 fw_len = fw_entry->size;
1567
1568 if (fw_len % sizeof(u32)) {
1569 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1570 "size of %s firmware must be a multiple of %zu bytes",
1571 fw_files[fwidx],sizeof(u32));
1572 release_firmware(fw_entry);
1573 ret = -EINVAL;
1574 goto done;
1575 }
1576
1577 fw_ptr = kmalloc(FIRMWARE_CHUNK_SIZE, GFP_KERNEL);
1578 if (fw_ptr == NULL){
1579 release_firmware(fw_entry);
1580 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1581 "failed to allocate memory for firmware2 upload");
1582 ret = -ENOMEM;
1583 goto done;
1584 }
1585
1586 pipe = usb_sndbulkpipe(hdw->usb_dev, PVR2_FIRMWARE_ENDPOINT);
1587
1588 fw_done = 0;
1589 for (fw_done = 0; fw_done < fw_len;) {
1590 bcnt = fw_len - fw_done;
1591 if (bcnt > FIRMWARE_CHUNK_SIZE) bcnt = FIRMWARE_CHUNK_SIZE;
1592 memcpy(fw_ptr, fw_entry->data + fw_done, bcnt);
1593 /* Usbsnoop log shows that we must swap bytes... */
1594 /* Some background info: The data being swapped here is a
1595 firmware image destined for the mpeg encoder chip that
1596 lives at the other end of a USB endpoint. The encoder
1597 chip always talks in 32 bit chunks and its storage is
1598 organized into 32 bit words. However from the file
1599 system to the encoder chip everything is purely a byte
1600 stream. The firmware file's contents are always 32 bit
1601 swapped from what the encoder expects. Thus the need
1602 always exists to swap the bytes regardless of the endian
1603 type of the host processor and therefore swab32() makes
1604 the most sense. */
1605 for (icnt = 0; icnt < bcnt/4 ; icnt++)
1606 ((u32 *)fw_ptr)[icnt] = swab32(((u32 *)fw_ptr)[icnt]);
1607
1608 ret |= usb_bulk_msg(hdw->usb_dev, pipe, fw_ptr,bcnt,
1609 &actual_length, HZ);
1610 ret |= (actual_length != bcnt);
1611 if (ret) break;
1612 fw_done += bcnt;
1613 }
1614
1615 trace_firmware("upload of %s : %i / %i ",
1616 fw_files[fwidx],fw_done,fw_len);
1617
1618 kfree(fw_ptr);
1619 release_firmware(fw_entry);
1620
1621 if (ret) {
1622 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1623 "firmware2 upload transfer failure");
1624 goto done;
1625 }
1626
1627 /* Finish upload */
1628
1629 ret |= pvr2_write_register(hdw, 0x9054, 0xffffffff); /*reset hw blocks*/
1630 ret |= pvr2_write_register(hdw, 0x9058, 0xffffffe8); /*VPU ctrl*/
1631 ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16));
1632
1633 if (ret) {
1634 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1635 "firmware2 upload post-proc failure");
1636 }
1637
1638 done:
1639 if (hdw->hdw_desc->signal_routing_scheme ==
1640 PVR2_ROUTING_SCHEME_GOTVIEW) {
1641 /* Ensure that GPIO 11 is set to output for GOTVIEW
1642 hardware. */
1643 pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0);
1644 }
1645 return ret;
1646 }
1647
1648
1649 static const char *pvr2_get_state_name(unsigned int st)
1650 {
1651 if (st < ARRAY_SIZE(pvr2_state_names)) {
1652 return pvr2_state_names[st];
1653 }
1654 return "???";
1655 }
1656
1657 static int pvr2_decoder_enable(struct pvr2_hdw *hdw,int enablefl)
1658 {
1659 /* Even though we really only care about the video decoder chip at
1660 this point, we'll broadcast stream on/off to all sub-devices
1661 anyway, just in case somebody else wants to hear the
1662 command... */
1663 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 stream=%s",
1664 (enablefl ? "on" : "off"));
1665 v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_stream, enablefl);
1666 v4l2_device_call_all(&hdw->v4l2_dev, 0, audio, s_stream, enablefl);
1667 if (hdw->decoder_client_id) {
1668 /* We get here if the encoder has been noticed. Otherwise
1669 we'll issue a warning to the user (which should
1670 normally never happen). */
1671 return 0;
1672 }
1673 if (!hdw->flag_decoder_missed) {
1674 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1675 "***WARNING*** No decoder present");
1676 hdw->flag_decoder_missed = !0;
1677 trace_stbit("flag_decoder_missed",
1678 hdw->flag_decoder_missed);
1679 }
1680 return -EIO;
1681 }
1682
1683
1684 int pvr2_hdw_get_state(struct pvr2_hdw *hdw)
1685 {
1686 return hdw->master_state;
1687 }
1688
1689
1690 static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *hdw)
1691 {
1692 if (!hdw->flag_tripped) return 0;
1693 hdw->flag_tripped = 0;
1694 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1695 "Clearing driver error status");
1696 return !0;
1697 }
1698
1699
1700 int pvr2_hdw_untrip(struct pvr2_hdw *hdw)
1701 {
1702 int fl;
1703 LOCK_TAKE(hdw->big_lock); do {
1704 fl = pvr2_hdw_untrip_unlocked(hdw);
1705 } while (0); LOCK_GIVE(hdw->big_lock);
1706 if (fl) pvr2_hdw_state_sched(hdw);
1707 return 0;
1708 }
1709
1710
1711
1712
1713 int pvr2_hdw_get_streaming(struct pvr2_hdw *hdw)
1714 {
1715 return hdw->state_pipeline_req != 0;
1716 }
1717
1718
1719 int pvr2_hdw_set_streaming(struct pvr2_hdw *hdw,int enable_flag)
1720 {
1721 int ret,st;
1722 LOCK_TAKE(hdw->big_lock); do {
1723 pvr2_hdw_untrip_unlocked(hdw);
1724 if ((!enable_flag) != !(hdw->state_pipeline_req)) {
1725 hdw->state_pipeline_req = enable_flag != 0;
1726 pvr2_trace(PVR2_TRACE_START_STOP,
1727 "/*--TRACE_STREAM--*/ %s",
1728 enable_flag ? "enable" : "disable");
1729 }
1730 pvr2_hdw_state_sched(hdw);
1731 } while (0); LOCK_GIVE(hdw->big_lock);
1732 if ((ret = pvr2_hdw_wait(hdw,0)) < 0) return ret;
1733 if (enable_flag) {
1734 while ((st = hdw->master_state) != PVR2_STATE_RUN) {
1735 if (st != PVR2_STATE_READY) return -EIO;
1736 if ((ret = pvr2_hdw_wait(hdw,st)) < 0) return ret;
1737 }
1738 }
1739 return 0;
1740 }
1741
1742
1743 int pvr2_hdw_set_stream_type(struct pvr2_hdw *hdw,enum pvr2_config config)
1744 {
1745 int fl;
1746 LOCK_TAKE(hdw->big_lock);
1747 if ((fl = (hdw->desired_stream_type != config)) != 0) {
1748 hdw->desired_stream_type = config;
1749 hdw->state_pipeline_config = 0;
1750 trace_stbit("state_pipeline_config",
1751 hdw->state_pipeline_config);
1752 pvr2_hdw_state_sched(hdw);
1753 }
1754 LOCK_GIVE(hdw->big_lock);
1755 if (fl) return 0;
1756 return pvr2_hdw_wait(hdw,0);
1757 }
1758
1759
1760 static int get_default_tuner_type(struct pvr2_hdw *hdw)
1761 {
1762 int unit_number = hdw->unit_number;
1763 int tp = -1;
1764 if ((unit_number >= 0) && (unit_number < PVR_NUM)) {
1765 tp = tuner[unit_number];
1766 }
1767 if (tp < 0) return -EINVAL;
1768 hdw->tuner_type = tp;
1769 hdw->tuner_updated = !0;
1770 return 0;
1771 }
1772
1773
1774 static v4l2_std_id get_default_standard(struct pvr2_hdw *hdw)
1775 {
1776 int unit_number = hdw->unit_number;
1777 int tp = 0;
1778 if ((unit_number >= 0) && (unit_number < PVR_NUM)) {
1779 tp = video_std[unit_number];
1780 if (tp) return tp;
1781 }
1782 return 0;
1783 }
1784
1785
1786 static unsigned int get_default_error_tolerance(struct pvr2_hdw *hdw)
1787 {
1788 int unit_number = hdw->unit_number;
1789 int tp = 0;
1790 if ((unit_number >= 0) && (unit_number < PVR_NUM)) {
1791 tp = tolerance[unit_number];
1792 }
1793 return tp;
1794 }
1795
1796
1797 static int pvr2_hdw_check_firmware(struct pvr2_hdw *hdw)
1798 {
1799 /* Try a harmless request to fetch the eeprom's address over
1800 endpoint 1. See what happens. Only the full FX2 image can
1801 respond to this. If this probe fails then likely the FX2
1802 firmware needs be loaded. */
1803 int result;
1804 LOCK_TAKE(hdw->ctl_lock); do {
1805 hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR;
1806 result = pvr2_send_request_ex(hdw,HZ*1,!0,
1807 hdw->cmd_buffer,1,
1808 hdw->cmd_buffer,1);
1809 if (result < 0) break;
1810 } while(0); LOCK_GIVE(hdw->ctl_lock);
1811 if (result) {
1812 pvr2_trace(PVR2_TRACE_INIT,
1813 "Probe of device endpoint 1 result status %d",
1814 result);
1815 } else {
1816 pvr2_trace(PVR2_TRACE_INIT,
1817 "Probe of device endpoint 1 succeeded");
1818 }
1819 return result == 0;
1820 }
1821
1822 struct pvr2_std_hack {
1823 v4l2_std_id pat; /* Pattern to match */
1824 v4l2_std_id msk; /* Which bits we care about */
1825 v4l2_std_id std; /* What additional standards or default to set */
1826 };
1827
1828 /* This data structure labels specific combinations of standards from
1829 tveeprom that we'll try to recognize. If we recognize one, then assume
1830 a specified default standard to use. This is here because tveeprom only
1831 tells us about available standards not the intended default standard (if
1832 any) for the device in question. We guess the default based on what has
1833 been reported as available. Note that this is only for guessing a
1834 default - which can always be overridden explicitly - and if the user
1835 has otherwise named a default then that default will always be used in
1836 place of this table. */
1837 static const struct pvr2_std_hack std_eeprom_maps[] = {
1838 { /* PAL(B/G) */
1839 .pat = V4L2_STD_B|V4L2_STD_GH,
1840 .std = V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_PAL_G,
1841 },
1842 { /* NTSC(M) */
1843 .pat = V4L2_STD_MN,
1844 .std = V4L2_STD_NTSC_M,
1845 },
1846 { /* PAL(I) */
1847 .pat = V4L2_STD_PAL_I,
1848 .std = V4L2_STD_PAL_I,
1849 },
1850 { /* SECAM(L/L') */
1851 .pat = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC,
1852 .std = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC,
1853 },
1854 { /* PAL(D/D1/K) */
1855 .pat = V4L2_STD_DK,
1856 .std = V4L2_STD_PAL_D|V4L2_STD_PAL_D1|V4L2_STD_PAL_K,
1857 },
1858 };
1859
1860 static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw)
1861 {
1862 char buf[40];
1863 unsigned int bcnt;
1864 v4l2_std_id std1,std2,std3;
1865
1866 std1 = get_default_standard(hdw);
1867 std3 = std1 ? 0 : hdw->hdw_desc->default_std_mask;
1868
1869 bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom);
1870 pvr2_trace(PVR2_TRACE_STD,
1871 "Supported video standard(s) reported available in hardware: %.*s",
1872 bcnt,buf);
1873
1874 hdw->std_mask_avail = hdw->std_mask_eeprom;
1875
1876 std2 = (std1|std3) & ~hdw->std_mask_avail;
1877 if (std2) {
1878 bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2);
1879 pvr2_trace(PVR2_TRACE_STD,
1880 "Expanding supported video standards to include: %.*s",
1881 bcnt,buf);
1882 hdw->std_mask_avail |= std2;
1883 }
1884
1885 hdw->std_info_cur.def.type_bitmask.valid_bits = hdw->std_mask_avail;
1886
1887 if (std1) {
1888 bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std1);
1889 pvr2_trace(PVR2_TRACE_STD,
1890 "Initial video standard forced to %.*s",
1891 bcnt,buf);
1892 hdw->std_mask_cur = std1;
1893 hdw->std_dirty = !0;
1894 return;
1895 }
1896 if (std3) {
1897 bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std3);
1898 pvr2_trace(PVR2_TRACE_STD,
1899 "Initial video standard (determined by device type): %.*s",
1900 bcnt, buf);
1901 hdw->std_mask_cur = std3;
1902 hdw->std_dirty = !0;
1903 return;
1904 }
1905
1906 {
1907 unsigned int idx;
1908 for (idx = 0; idx < ARRAY_SIZE(std_eeprom_maps); idx++) {
1909 if (std_eeprom_maps[idx].msk ?
1910 ((std_eeprom_maps[idx].pat ^
1911 hdw->std_mask_eeprom) &
1912 std_eeprom_maps[idx].msk) :
1913 (std_eeprom_maps[idx].pat !=
1914 hdw->std_mask_eeprom)) continue;
1915 bcnt = pvr2_std_id_to_str(buf,sizeof(buf),
1916 std_eeprom_maps[idx].std);
1917 pvr2_trace(PVR2_TRACE_STD,
1918 "Initial video standard guessed as %.*s",
1919 bcnt,buf);
1920 hdw->std_mask_cur = std_eeprom_maps[idx].std;
1921 hdw->std_dirty = !0;
1922 return;
1923 }
1924 }
1925
1926 }
1927
1928
1929 static unsigned int pvr2_copy_i2c_addr_list(
1930 unsigned short *dst, const unsigned char *src,
1931 unsigned int dst_max)
1932 {
1933 unsigned int cnt = 0;
1934 if (!src) return 0;
1935 while (src[cnt] && (cnt + 1) < dst_max) {
1936 dst[cnt] = src[cnt];
1937 cnt++;
1938 }
1939 dst[cnt] = I2C_CLIENT_END;
1940 return cnt;
1941 }
1942
1943
1944 static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw)
1945 {
1946 /*
1947 Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit of nuttiness
1948 for cx25840 causes that module to correctly set up its video
1949 scaling. This is really a problem in the cx25840 module itself,
1950 but we work around it here. The problem has not been seen in
1951 ivtv because there VBI is supported and set up. We don't do VBI
1952 here (at least not yet) and thus we never attempted to even set
1953 it up.
1954 */
1955 struct v4l2_format fmt;
1956 if (hdw->decoder_client_id != PVR2_CLIENT_ID_CX25840) {
1957 /* We're not using a cx25840 so don't enable the hack */
1958 return;
1959 }
1960
1961 pvr2_trace(PVR2_TRACE_INIT,
1962 "Module ID %u: Executing cx25840 VBI hack",
1963 hdw->decoder_client_id);
1964 memset(&fmt, 0, sizeof(fmt));
1965 fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
1966 fmt.fmt.sliced.service_lines[0][21] = V4L2_SLICED_CAPTION_525;
1967 fmt.fmt.sliced.service_lines[1][21] = V4L2_SLICED_CAPTION_525;
1968 v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
1969 vbi, s_sliced_fmt, &fmt.fmt.sliced);
1970 }
1971
1972
1973 static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
1974 const struct pvr2_device_client_desc *cd)
1975 {
1976 const char *fname;
1977 unsigned char mid;
1978 struct v4l2_subdev *sd;
1979 unsigned int i2ccnt;
1980 const unsigned char *p;
1981 /* Arbitrary count - max # i2c addresses we will probe */
1982 unsigned short i2caddr[25];
1983
1984 mid = cd->module_id;
1985 fname = (mid < ARRAY_SIZE(module_names)) ? module_names[mid] : NULL;
1986 if (!fname) {
1987 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
1988 "Module ID %u for device %s has no name? The driver might have a configuration problem.",
1989 mid,
1990 hdw->hdw_desc->description);
1991 return -EINVAL;
1992 }
1993 pvr2_trace(PVR2_TRACE_INIT,
1994 "Module ID %u (%s) for device %s being loaded...",
1995 mid, fname,
1996 hdw->hdw_desc->description);
1997
1998 i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, cd->i2c_address_list,
1999 ARRAY_SIZE(i2caddr));
2000 if (!i2ccnt && ((p = (mid < ARRAY_SIZE(module_i2c_addresses)) ?
2001 module_i2c_addresses[mid] : NULL) != NULL)) {
2002 /* Second chance: Try default i2c address list */
2003 i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, p,
2004 ARRAY_SIZE(i2caddr));
2005 if (i2ccnt) {
2006 pvr2_trace(PVR2_TRACE_INIT,
2007 "Module ID %u: Using default i2c address list",
2008 mid);
2009 }
2010 }
2011
2012 if (!i2ccnt) {
2013 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
2014 "Module ID %u (%s) for device %s: No i2c addresses. The driver might have a configuration problem.",
2015 mid, fname, hdw->hdw_desc->description);
2016 return -EINVAL;
2017 }
2018
2019 if (i2ccnt == 1) {
2020 pvr2_trace(PVR2_TRACE_INIT,
2021 "Module ID %u: Setting up with specified i2c address 0x%x",
2022 mid, i2caddr[0]);
2023 sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
2024 fname, i2caddr[0], NULL);
2025 } else {
2026 pvr2_trace(PVR2_TRACE_INIT,
2027 "Module ID %u: Setting up with address probe list",
2028 mid);
2029 sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
2030 fname, 0, i2caddr);
2031 }
2032
2033 if (!sd) {
2034 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
2035 "Module ID %u (%s) for device %s failed to load. Possible missing sub-device kernel module or initialization failure within module.",
2036 mid, fname, hdw->hdw_desc->description);
2037 return -EIO;
2038 }
2039
2040 /* Tag this sub-device instance with the module ID we know about.
2041 In other places we'll use that tag to determine if the instance
2042 requires special handling. */
2043 sd->grp_id = mid;
2044
2045 pvr2_trace(PVR2_TRACE_INFO, "Attached sub-driver %s", fname);
2046
2047
2048 /* client-specific setup... */
2049 switch (mid) {
2050 case PVR2_CLIENT_ID_CX25840:
2051 case PVR2_CLIENT_ID_SAA7115:
2052 hdw->decoder_client_id = mid;
2053 break;
2054 default: break;
2055 }
2056
2057 return 0;
2058 }
2059
2060
2061 static void pvr2_hdw_load_modules(struct pvr2_hdw *hdw)
2062 {
2063 unsigned int idx;
2064 const struct pvr2_string_table *cm;
2065 const struct pvr2_device_client_table *ct;
2066 int okFl = !0;
2067
2068 cm = &hdw->hdw_desc->client_modules;
2069 for (idx = 0; idx < cm->cnt; idx++) {
2070 request_module(cm->lst[idx]);
2071 }
2072
2073 ct = &hdw->hdw_desc->client_table;
2074 for (idx = 0; idx < ct->cnt; idx++) {
2075 if (pvr2_hdw_load_subdev(hdw, &ct->lst[idx]) < 0) okFl = 0;
2076 }
2077 if (!okFl) {
2078 hdw->flag_modulefail = !0;
2079 pvr2_hdw_render_useless(hdw);
2080 }
2081 }
2082
2083
2084 static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
2085 {
2086 int ret;
2087 unsigned int idx;
2088 struct pvr2_ctrl *cptr;
2089 int reloadFl = 0;
2090 if (hdw->hdw_desc->fx2_firmware.cnt) {
2091 if (!reloadFl) {
2092 reloadFl =
2093 (hdw->usb_intf->cur_altsetting->desc.bNumEndpoints
2094 == 0);
2095 if (reloadFl) {
2096 pvr2_trace(PVR2_TRACE_INIT,
2097 "USB endpoint config looks strange; possibly firmware needs to be loaded");
2098 }
2099 }
2100 if (!reloadFl) {
2101 reloadFl = !pvr2_hdw_check_firmware(hdw);
2102 if (reloadFl) {
2103 pvr2_trace(PVR2_TRACE_INIT,
2104 "Check for FX2 firmware failed; possibly firmware needs to be loaded");
2105 }
2106 }
2107 if (reloadFl) {
2108 if (pvr2_upload_firmware1(hdw) != 0) {
2109 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
2110 "Failure uploading firmware1");
2111 }
2112 return;
2113 }
2114 }
2115 hdw->fw1_state = FW1_STATE_OK;
2116
2117 if (!pvr2_hdw_dev_ok(hdw)) return;
2118
2119 hdw->force_dirty = !0;
2120
2121 if (!hdw->hdw_desc->flag_no_powerup) {
2122 pvr2_hdw_cmd_powerup(hdw);
2123 if (!pvr2_hdw_dev_ok(hdw)) return;
2124 }
2125
2126 /* Take the IR chip out of reset, if appropriate */
2127 if (hdw->ir_scheme_active == PVR2_IR_SCHEME_ZILOG) {
2128 pvr2_issue_simple_cmd(hdw,
2129 FX2CMD_HCW_ZILOG_RESET |
2130 (1 << 8) |
2131 ((0) << 16));
2132 }
2133
2134 /* This step MUST happen after the earlier powerup step */
2135 pvr2_i2c_core_init(hdw);
2136 if (!pvr2_hdw_dev_ok(hdw)) return;
2137
2138 /* Reset demod only on Hauppauge 160xxx platform */
2139 if (le16_to_cpu(hdw->usb_dev->descriptor.idVendor) == 0x2040 &&
2140 (le16_to_cpu(hdw->usb_dev->descriptor.idProduct) == 0x7502 ||
2141 le16_to_cpu(hdw->usb_dev->descriptor.idProduct) == 0x7510)) {
2142 pr_info("%s(): resetting 160xxx demod\n", __func__);
2143 /* TODO: not sure this is proper place to reset once only */
2144 pvr2_issue_simple_cmd(hdw,
2145 FX2CMD_HCW_DEMOD_RESET_PIN |
2146 (1 << 8) |
2147 ((0) << 16));
2148 usleep_range(10000, 10500);
2149 pvr2_issue_simple_cmd(hdw,
2150 FX2CMD_HCW_DEMOD_RESET_PIN |
2151 (1 << 8) |
2152 ((1) << 16));
2153 usleep_range(10000, 10500);
2154 }
2155
2156 pvr2_hdw_load_modules(hdw);
2157 if (!pvr2_hdw_dev_ok(hdw)) return;
2158
2159 v4l2_device_call_all(&hdw->v4l2_dev, 0, core, load_fw);
2160
2161 for (idx = 0; idx < CTRLDEF_COUNT; idx++) {
2162 cptr = hdw->controls + idx;
2163 if (cptr->info->skip_init) continue;
2164 if (!cptr->info->set_value) continue;
2165 cptr->info->set_value(cptr,~0,cptr->info->default_value);
2166 }
2167
2168 pvr2_hdw_cx25840_vbi_hack(hdw);
2169
2170 /* Set up special default values for the television and radio
2171 frequencies here. It's not really important what these defaults
2172 are, but I set them to something usable in the Chicago area just
2173 to make driver testing a little easier. */
2174
2175 hdw->freqValTelevision = default_tv_freq;
2176 hdw->freqValRadio = default_radio_freq;
2177
2178 // Do not use pvr2_reset_ctl_endpoints() here. It is not
2179 // thread-safe against the normal pvr2_send_request() mechanism.
2180 // (We should make it thread safe).
2181
2182 if (hdw->hdw_desc->flag_has_hauppauge_rom) {
2183 ret = pvr2_hdw_get_eeprom_addr(hdw);
2184 if (!pvr2_hdw_dev_ok(hdw)) return;
2185 if (ret < 0) {
2186 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
2187 "Unable to determine location of eeprom, skipping");
2188 } else {
2189 hdw->eeprom_addr = ret;
2190 pvr2_eeprom_analyze(hdw);
2191 if (!pvr2_hdw_dev_ok(hdw)) return;
2192 }
2193 } else {
2194 hdw->tuner_type = hdw->hdw_desc->default_tuner_type;
2195 hdw->tuner_updated = !0;
2196 hdw->std_mask_eeprom = V4L2_STD_ALL;
2197 }
2198
2199 if (hdw->serial_number) {
2200 idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1,
2201 "sn-%lu", hdw->serial_number);
2202 } else if (hdw->unit_number >= 0) {
2203 idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1,
2204 "unit-%c",
2205 hdw->unit_number + 'a');
2206 } else {
2207 idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1,
2208 "unit-??");
2209 }
2210 hdw->identifier[idx] = 0;
2211
2212 pvr2_hdw_setup_std(hdw);
2213
2214 if (!get_default_tuner_type(hdw)) {
2215 pvr2_trace(PVR2_TRACE_INIT,
2216 "pvr2_hdw_setup: Tuner type overridden to %d",
2217 hdw->tuner_type);
2218 }
2219
2220
2221 if (!pvr2_hdw_dev_ok(hdw)) return;
2222
2223 if (hdw->hdw_desc->signal_routing_scheme ==
2224 PVR2_ROUTING_SCHEME_GOTVIEW) {
2225 /* Ensure that GPIO 11 is set to output for GOTVIEW
2226 hardware. */
2227 pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0);
2228 }
2229
2230 pvr2_hdw_commit_setup(hdw);
2231
2232 hdw->vid_stream = pvr2_stream_create();
2233 if (!pvr2_hdw_dev_ok(hdw)) return;
2234 pvr2_trace(PVR2_TRACE_INIT,
2235 "pvr2_hdw_setup: video stream is %p",hdw->vid_stream);
2236 if (hdw->vid_stream) {
2237 idx = get_default_error_tolerance(hdw);
2238 if (idx) {
2239 pvr2_trace(PVR2_TRACE_INIT,
2240 "pvr2_hdw_setup: video stream %p setting tolerance %u",
2241 hdw->vid_stream,idx);
2242 }
2243 pvr2_stream_setup(hdw->vid_stream,hdw->usb_dev,
2244 PVR2_VID_ENDPOINT,idx);
2245 }
2246
2247 if (!pvr2_hdw_dev_ok(hdw)) return;
2248
2249 hdw->flag_init_ok = !0;
2250
2251 pvr2_hdw_state_sched(hdw);
2252 }
2253
2254
2255 /* Set up the structure and attempt to put the device into a usable state.
2256 This can be a time-consuming operation, which is why it is not done
2257 internally as part of the create() step. */
2258 static void pvr2_hdw_setup(struct pvr2_hdw *hdw)
2259 {
2260 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) begin",hdw);
2261 do {
2262 pvr2_hdw_setup_low(hdw);
2263 pvr2_trace(PVR2_TRACE_INIT,
2264 "pvr2_hdw_setup(hdw=%p) done, ok=%d init_ok=%d",
2265 hdw,pvr2_hdw_dev_ok(hdw),hdw->flag_init_ok);
2266 if (pvr2_hdw_dev_ok(hdw)) {
2267 if (hdw->flag_init_ok) {
2268 pvr2_trace(
2269 PVR2_TRACE_INFO,
2270 "Device initialization completed successfully.");
2271 break;
2272 }
2273 if (hdw->fw1_state == FW1_STATE_RELOAD) {
2274 pvr2_trace(
2275 PVR2_TRACE_INFO,
2276 "Device microcontroller firmware (re)loaded; it should now reset and reconnect.");
2277 break;
2278 }
2279 pvr2_trace(
2280 PVR2_TRACE_ERROR_LEGS,
2281 "Device initialization was not successful.");
2282 if (hdw->fw1_state == FW1_STATE_MISSING) {
2283 pvr2_trace(
2284 PVR2_TRACE_ERROR_LEGS,
2285 "Giving up since device microcontroller firmware appears to be missing.");
2286 break;
2287 }
2288 }
2289 if (hdw->flag_modulefail) {
2290 pvr2_trace(
2291 PVR2_TRACE_ERROR_LEGS,
2292 "***WARNING*** pvrusb2 driver initialization failed due to the failure of one or more sub-device kernel modules.");
2293 pvr2_trace(
2294 PVR2_TRACE_ERROR_LEGS,
2295 "You need to resolve the failing condition before this driver can function. There should be some earlier messages giving more information about the problem.");
2296 break;
2297 }
2298 if (procreload) {
2299 pvr2_trace(
2300 PVR2_TRACE_ERROR_LEGS,
2301 "Attempting pvrusb2 recovery by reloading primary firmware.");
2302 pvr2_trace(
2303 PVR2_TRACE_ERROR_LEGS,
2304 "If this works, device should disconnect and reconnect in a sane state.");
2305 hdw->fw1_state = FW1_STATE_UNKNOWN;
2306 pvr2_upload_firmware1(hdw);
2307 } else {
2308 pvr2_trace(
2309 PVR2_TRACE_ERROR_LEGS,
2310 "***WARNING*** pvrusb2 device hardware appears to be jammed and I can't clear it.");
2311 pvr2_trace(
2312 PVR2_TRACE_ERROR_LEGS,
2313 "You might need to power cycle the pvrusb2 device in order to recover.");
2314 }
2315 } while (0);
2316 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) end",hdw);
2317 }
2318
2319
2320 /* Perform second stage initialization. Set callback pointer first so that
2321 we can avoid a possible initialization race (if the kernel thread runs
2322 before the callback has been set). */
2323 int pvr2_hdw_initialize(struct pvr2_hdw *hdw,
2324 void (*callback_func)(void *),
2325 void *callback_data)
2326 {
2327 LOCK_TAKE(hdw->big_lock); do {
2328 if (hdw->flag_disconnected) {
2329 /* Handle a race here: If we're already
2330 disconnected by this point, then give up. If we
2331 get past this then we'll remain connected for
2332 the duration of initialization since the entire
2333 initialization sequence is now protected by the
2334 big_lock. */
2335 break;
2336 }
2337 hdw->state_data = callback_data;
2338 hdw->state_func = callback_func;
2339 pvr2_hdw_setup(hdw);
2340 } while (0); LOCK_GIVE(hdw->big_lock);
2341 return hdw->flag_init_ok;
2342 }
2343
2344
2345 /* Create, set up, and return a structure for interacting with the
2346 underlying hardware. */
2347 struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
2348 const struct usb_device_id *devid)
2349 {
2350 unsigned int idx,cnt1,cnt2,m;
2351 struct pvr2_hdw *hdw = NULL;
2352 int valid_std_mask;
2353 struct pvr2_ctrl *cptr;
2354 struct usb_device *usb_dev;
2355 const struct pvr2_device_desc *hdw_desc;
2356 __u8 ifnum;
2357 struct v4l2_queryctrl qctrl;
2358 struct pvr2_ctl_info *ciptr;
2359
2360 usb_dev = interface_to_usbdev(intf);
2361
2362 hdw_desc = (const struct pvr2_device_desc *)(devid->driver_info);
2363
2364 if (hdw_desc == NULL) {
2365 pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_create: No device description pointer, unable to continue.");
2366 pvr2_trace(PVR2_TRACE_INIT,
2367 "If you have a new device type, please contact Mike Isely <isely@pobox.com> to get it included in the driver");
2368 goto fail;
2369 }
2370
2371 hdw = kzalloc(sizeof(*hdw),GFP_KERNEL);
2372 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"",
2373 hdw,hdw_desc->description);
2374 pvr2_trace(PVR2_TRACE_INFO, "Hardware description: %s",
2375 hdw_desc->description);
2376 if (hdw_desc->flag_is_experimental) {
2377 pvr2_trace(PVR2_TRACE_INFO, "**********");
2378 pvr2_trace(PVR2_TRACE_INFO,
2379 "***WARNING*** Support for this device (%s) is experimental.",
2380 hdw_desc->description);
2381 pvr2_trace(PVR2_TRACE_INFO,
2382 "Important functionality might not be entirely working.");
2383 pvr2_trace(PVR2_TRACE_INFO,
2384 "Please consider contacting the driver author to help with further stabilization of the driver.");
2385 pvr2_trace(PVR2_TRACE_INFO, "**********");
2386 }
2387 if (!hdw) goto fail;
2388
2389 timer_setup(&hdw->quiescent_timer, pvr2_hdw_quiescent_timeout, 0);
2390
2391 timer_setup(&hdw->decoder_stabilization_timer,
2392 pvr2_hdw_decoder_stabilization_timeout, 0);
2393
2394 timer_setup(&hdw->encoder_wait_timer, pvr2_hdw_encoder_wait_timeout,
2395 0);
2396
2397 timer_setup(&hdw->encoder_run_timer, pvr2_hdw_encoder_run_timeout, 0);
2398
2399 hdw->master_state = PVR2_STATE_DEAD;
2400
2401 init_waitqueue_head(&hdw->state_wait_data);
2402
2403 hdw->tuner_signal_stale = !0;
2404 cx2341x_fill_defaults(&hdw->enc_ctl_state);
2405
2406 /* Calculate which inputs are OK */
2407 m = 0;
2408 if (hdw_desc->flag_has_analogtuner) m |= 1 << PVR2_CVAL_INPUT_TV;
2409 if (hdw_desc->digital_control_scheme != PVR2_DIGITAL_SCHEME_NONE) {
2410 m |= 1 << PVR2_CVAL_INPUT_DTV;
2411 }
2412 if (hdw_desc->flag_has_svideo) m |= 1 << PVR2_CVAL_INPUT_SVIDEO;
2413 if (hdw_desc->flag_has_composite) m |= 1 << PVR2_CVAL_INPUT_COMPOSITE;
2414 if (hdw_desc->flag_has_fmradio) m |= 1 << PVR2_CVAL_INPUT_RADIO;
2415 hdw->input_avail_mask = m;
2416 hdw->input_allowed_mask = hdw->input_avail_mask;
2417
2418 /* If not a hybrid device, pathway_state never changes. So
2419 initialize it here to what it should forever be. */
2420 if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_DTV))) {
2421 hdw->pathway_state = PVR2_PATHWAY_ANALOG;
2422 } else if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_TV))) {
2423 hdw->pathway_state = PVR2_PATHWAY_DIGITAL;
2424 }
2425
2426 hdw->control_cnt = CTRLDEF_COUNT;
2427 hdw->control_cnt += MPEGDEF_COUNT;
2428 hdw->controls = kcalloc(hdw->control_cnt, sizeof(struct pvr2_ctrl),
2429 GFP_KERNEL);
2430 if (!hdw->controls) goto fail;
2431 hdw->hdw_desc = hdw_desc;
2432 hdw->ir_scheme_active = hdw->hdw_desc->ir_scheme;
2433 for (idx = 0; idx < hdw->control_cnt; idx++) {
2434 cptr = hdw->controls + idx;
2435 cptr->hdw = hdw;
2436 }
2437 for (idx = 0; idx < 32; idx++) {
2438 hdw->std_mask_ptrs[idx] = hdw->std_mask_names[idx];
2439 }
2440 for (idx = 0; idx < CTRLDEF_COUNT; idx++) {
2441 cptr = hdw->controls + idx;
2442 cptr->info = control_defs+idx;
2443 }
2444
2445 /* Ensure that default input choice is a valid one. */
2446 m = hdw->input_avail_mask;
2447 if (m) for (idx = 0; idx < (sizeof(m) << 3); idx++) {
2448 if (!((1UL << idx) & m)) continue;
2449 hdw->input_val = idx;
2450 break;
2451 }
2452
2453 /* Define and configure additional controls from cx2341x module. */
2454 hdw->mpeg_ctrl_info = kcalloc(MPEGDEF_COUNT,
2455 sizeof(*(hdw->mpeg_ctrl_info)),
2456 GFP_KERNEL);
2457 if (!hdw->mpeg_ctrl_info) goto fail;
2458 for (idx = 0; idx < MPEGDEF_COUNT; idx++) {
2459 cptr = hdw->controls + idx + CTRLDEF_COUNT;
2460 ciptr = &(hdw->mpeg_ctrl_info[idx].info);
2461 ciptr->desc = hdw->mpeg_ctrl_info[idx].desc;
2462 ciptr->name = mpeg_ids[idx].strid;
2463 ciptr->v4l_id = mpeg_ids[idx].id;
2464 ciptr->skip_init = !0;
2465 ciptr->get_value = ctrl_cx2341x_get;
2466 ciptr->get_v4lflags = ctrl_cx2341x_getv4lflags;
2467 ciptr->is_dirty = ctrl_cx2341x_is_dirty;
2468 if (!idx) ciptr->clear_dirty = ctrl_cx2341x_clear_dirty;
2469 qctrl.id = ciptr->v4l_id;
2470 cx2341x_ctrl_query(&hdw->enc_ctl_state,&qctrl);
2471 if (!(qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY)) {
2472 ciptr->set_value = ctrl_cx2341x_set;
2473 }
2474 strscpy(hdw->mpeg_ctrl_info[idx].desc, qctrl.name,
2475 sizeof(hdw->mpeg_ctrl_info[idx].desc));
2476 ciptr->default_value = qctrl.default_value;
2477 switch (qctrl.type) {
2478 default:
2479 case V4L2_CTRL_TYPE_INTEGER:
2480 ciptr->type = pvr2_ctl_int;
2481 ciptr->def.type_int.min_value = qctrl.minimum;
2482 ciptr->def.type_int.max_value = qctrl.maximum;
2483 break;
2484 case V4L2_CTRL_TYPE_BOOLEAN:
2485 ciptr->type = pvr2_ctl_bool;
2486 break;
2487 case V4L2_CTRL_TYPE_MENU:
2488 ciptr->type = pvr2_ctl_enum;
2489 ciptr->def.type_enum.value_names =
2490 cx2341x_ctrl_get_menu(&hdw->enc_ctl_state,
2491 ciptr->v4l_id);
2492 for (cnt1 = 0;
2493 ciptr->def.type_enum.value_names[cnt1] != NULL;
2494 cnt1++) { }
2495 ciptr->def.type_enum.count = cnt1;
2496 break;
2497 }
2498 cptr->info = ciptr;
2499 }
2500
2501 // Initialize control data regarding video standard masks
2502 valid_std_mask = pvr2_std_get_usable();
2503 for (idx = 0; idx < 32; idx++) {
2504 if (!(valid_std_mask & (1UL << idx))) continue;
2505 cnt1 = pvr2_std_id_to_str(
2506 hdw->std_mask_names[idx],
2507 sizeof(hdw->std_mask_names[idx])-1,
2508 1UL << idx);
2509 hdw->std_mask_names[idx][cnt1] = 0;
2510 }
2511 cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDAVAIL);
2512 if (cptr) {
2513 memcpy(&hdw->std_info_avail,cptr->info,
2514 sizeof(hdw->std_info_avail));
2515 cptr->info = &hdw->std_info_avail;
2516 hdw->std_info_avail.def.type_bitmask.bit_names =
2517 hdw->std_mask_ptrs;
2518 hdw->std_info_avail.def.type_bitmask.valid_bits =
2519 valid_std_mask;
2520 }
2521 cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDCUR);
2522 if (cptr) {
2523 memcpy(&hdw->std_info_cur,cptr->info,
2524 sizeof(hdw->std_info_cur));
2525 cptr->info = &hdw->std_info_cur;
2526 hdw->std_info_cur.def.type_bitmask.bit_names =
2527 hdw->std_mask_ptrs;
2528 hdw->std_info_cur.def.type_bitmask.valid_bits =
2529 valid_std_mask;
2530 }
2531 cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDDETECT);
2532 if (cptr) {
2533 memcpy(&hdw->std_info_detect,cptr->info,
2534 sizeof(hdw->std_info_detect));
2535 cptr->info = &hdw->std_info_detect;
2536 hdw->std_info_detect.def.type_bitmask.bit_names =
2537 hdw->std_mask_ptrs;
2538 hdw->std_info_detect.def.type_bitmask.valid_bits =
2539 valid_std_mask;
2540 }
2541
2542 hdw->cropcap_stale = !0;
2543 hdw->eeprom_addr = -1;
2544 hdw->unit_number = -1;
2545 hdw->v4l_minor_number_video = -1;
2546 hdw->v4l_minor_number_vbi = -1;
2547 hdw->v4l_minor_number_radio = -1;
2548 hdw->ctl_write_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL);
2549 if (!hdw->ctl_write_buffer) goto fail;
2550 hdw->ctl_read_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL);
2551 if (!hdw->ctl_read_buffer) goto fail;
2552 hdw->ctl_write_urb = usb_alloc_urb(0,GFP_KERNEL);
2553 if (!hdw->ctl_write_urb) goto fail;
2554 hdw->ctl_read_urb = usb_alloc_urb(0,GFP_KERNEL);
2555 if (!hdw->ctl_read_urb) goto fail;
2556
2557 if (v4l2_device_register(&intf->dev, &hdw->v4l2_dev) != 0) {
2558 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
2559 "Error registering with v4l core, giving up");
2560 goto fail;
2561 }
2562 mutex_lock(&pvr2_unit_mtx);
2563 do {
2564 for (idx = 0; idx < PVR_NUM; idx++) {
2565 if (unit_pointers[idx]) continue;
2566 hdw->unit_number = idx;
2567 unit_pointers[idx] = hdw;
2568 break;
2569 }
2570 } while (0);
2571 mutex_unlock(&pvr2_unit_mtx);
2572
2573 cnt1 = 0;
2574 cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"pvrusb2");
2575 cnt1 += cnt2;
2576 if (hdw->unit_number >= 0) {
2577 cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"_%c",
2578 ('a' + hdw->unit_number));
2579 cnt1 += cnt2;
2580 }
2581 if (cnt1 >= sizeof(hdw->name)) cnt1 = sizeof(hdw->name)-1;
2582 hdw->name[cnt1] = 0;
2583
2584 INIT_WORK(&hdw->workpoll,pvr2_hdw_worker_poll);
2585
2586 pvr2_trace(PVR2_TRACE_INIT,"Driver unit number is %d, name is %s",
2587 hdw->unit_number,hdw->name);
2588
2589 hdw->tuner_type = -1;
2590 hdw->flag_ok = !0;
2591
2592 hdw->usb_intf = intf;
2593 hdw->usb_dev = usb_dev;
2594
2595 usb_make_path(hdw->usb_dev, hdw->bus_info, sizeof(hdw->bus_info));
2596
2597 ifnum = hdw->usb_intf->cur_altsetting->desc.bInterfaceNumber;
2598 usb_set_interface(hdw->usb_dev,ifnum,0);
2599
2600 mutex_init(&hdw->ctl_lock_mutex);
2601 mutex_init(&hdw->big_lock_mutex);
2602
2603 return hdw;
2604 fail:
2605 if (hdw) {
2606 del_timer_sync(&hdw->quiescent_timer);
2607 del_timer_sync(&hdw->decoder_stabilization_timer);
2608 del_timer_sync(&hdw->encoder_run_timer);
2609 del_timer_sync(&hdw->encoder_wait_timer);
2610 flush_work(&hdw->workpoll);
2611 usb_free_urb(hdw->ctl_read_urb);
2612 usb_free_urb(hdw->ctl_write_urb);
2613 kfree(hdw->ctl_read_buffer);
2614 kfree(hdw->ctl_write_buffer);
2615 kfree(hdw->controls);
2616 kfree(hdw->mpeg_ctrl_info);
2617 kfree(hdw);
2618 }
2619 return NULL;
2620 }
2621
2622
2623 /* Remove _all_ associations between this driver and the underlying USB
2624 layer. */
2625 static void pvr2_hdw_remove_usb_stuff(struct pvr2_hdw *hdw)
2626 {
2627 if (hdw->flag_disconnected) return;
2628 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_remove_usb_stuff: hdw=%p",hdw);
2629 if (hdw->ctl_read_urb) {
2630 usb_kill_urb(hdw->ctl_read_urb);
2631 usb_free_urb(hdw->ctl_read_urb);
2632 hdw->ctl_read_urb = NULL;
2633 }
2634 if (hdw->ctl_write_urb) {
2635 usb_kill_urb(hdw->ctl_write_urb);
2636 usb_free_urb(hdw->ctl_write_urb);
2637 hdw->ctl_write_urb = NULL;
2638 }
2639 if (hdw->ctl_read_buffer) {
2640 kfree(hdw->ctl_read_buffer);
2641 hdw->ctl_read_buffer = NULL;
2642 }
2643 if (hdw->ctl_write_buffer) {
2644 kfree(hdw->ctl_write_buffer);
2645 hdw->ctl_write_buffer = NULL;
2646 }
2647 hdw->flag_disconnected = !0;
2648 /* If we don't do this, then there will be a dangling struct device
2649 reference to our disappearing device persisting inside the V4L
2650 core... */
2651 v4l2_device_disconnect(&hdw->v4l2_dev);
2652 hdw->usb_dev = NULL;
2653 hdw->usb_intf = NULL;
2654 pvr2_hdw_render_useless(hdw);
2655 }
2656
2657 void pvr2_hdw_set_v4l2_dev(struct pvr2_hdw *hdw, struct video_device *vdev)
2658 {
2659 vdev->v4l2_dev = &hdw->v4l2_dev;
2660 }
2661
2662 /* Destroy hardware interaction structure */
2663 void pvr2_hdw_destroy(struct pvr2_hdw *hdw)
2664 {
2665 if (!hdw) return;
2666 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_destroy: hdw=%p",hdw);
2667 flush_work(&hdw->workpoll);
2668 del_timer_sync(&hdw->quiescent_timer);
2669 del_timer_sync(&hdw->decoder_stabilization_timer);
2670 del_timer_sync(&hdw->encoder_run_timer);
2671 del_timer_sync(&hdw->encoder_wait_timer);
2672 if (hdw->fw_buffer) {
2673 kfree(hdw->fw_buffer);
2674 hdw->fw_buffer = NULL;
2675 }
2676 if (hdw->vid_stream) {
2677 pvr2_stream_destroy(hdw->vid_stream);
2678 hdw->vid_stream = NULL;
2679 }
2680 pvr2_i2c_core_done(hdw);
2681 v4l2_device_unregister(&hdw->v4l2_dev);
2682 pvr2_hdw_remove_usb_stuff(hdw);
2683 mutex_lock(&pvr2_unit_mtx);
2684 do {
2685 if ((hdw->unit_number >= 0) &&
2686 (hdw->unit_number < PVR_NUM) &&
2687 (unit_pointers[hdw->unit_number] == hdw)) {
2688 unit_pointers[hdw->unit_number] = NULL;
2689 }
2690 } while (0);
2691 mutex_unlock(&pvr2_unit_mtx);
2692 kfree(hdw->controls);
2693 kfree(hdw->mpeg_ctrl_info);
2694 kfree(hdw);
2695 }
2696
2697
2698 int pvr2_hdw_dev_ok(struct pvr2_hdw *hdw)
2699 {
2700 return (hdw && hdw->flag_ok);
2701 }
2702
2703
2704 /* Called when hardware has been unplugged */
2705 void pvr2_hdw_disconnect(struct pvr2_hdw *hdw)
2706 {
2707 pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw);
2708 LOCK_TAKE(hdw->big_lock);
2709 LOCK_TAKE(hdw->ctl_lock);
2710 pvr2_hdw_remove_usb_stuff(hdw);
2711 LOCK_GIVE(hdw->ctl_lock);
2712 LOCK_GIVE(hdw->big_lock);
2713 }
2714
2715
2716 /* Get the number of defined controls */
2717 unsigned int pvr2_hdw_get_ctrl_count(struct pvr2_hdw *hdw)
2718 {
2719 return hdw->control_cnt;
2720 }
2721
2722
2723 /* Retrieve a control handle given its index (0..count-1) */
2724 struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_index(struct pvr2_hdw *hdw,
2725 unsigned int idx)
2726 {
2727 if (idx >= hdw->control_cnt) return NULL;
2728 return hdw->controls + idx;
2729 }
2730
2731
2732 /* Retrieve a control handle given its index (0..count-1) */
2733 struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_id(struct pvr2_hdw *hdw,
2734 unsigned int ctl_id)
2735 {
2736 struct pvr2_ctrl *cptr;
2737 unsigned int idx;
2738 int i;
2739
2740 /* This could be made a lot more efficient, but for now... */
2741 for (idx = 0; idx < hdw->control_cnt; idx++) {
2742 cptr = hdw->controls + idx;
2743 i = cptr->info->internal_id;
2744 if (i && (i == ctl_id)) return cptr;
2745 }
2746 return NULL;
2747 }
2748
2749
2750 /* Given a V4L ID, retrieve the control structure associated with it. */
2751 struct pvr2_ctrl *pvr2_hdw_get_ctrl_v4l(struct pvr2_hdw *hdw,unsigned int ctl_id)
2752 {
2753 struct pvr2_ctrl *cptr;
2754 unsigned int idx;
2755 int i;
2756
2757 /* This could be made a lot more efficient, but for now... */
2758 for (idx = 0; idx < hdw->control_cnt; idx++) {
2759 cptr = hdw->controls + idx;
2760 i = cptr->info->v4l_id;
2761 if (i && (i == ctl_id)) return cptr;
2762 }
2763 return NULL;
2764 }
2765
2766
2767 /* Given a V4L ID for its immediate predecessor, retrieve the control
2768 structure associated with it. */
2769 struct pvr2_ctrl *pvr2_hdw_get_ctrl_nextv4l(struct pvr2_hdw *hdw,
2770 unsigned int ctl_id)
2771 {
2772 struct pvr2_ctrl *cptr,*cp2;
2773 unsigned int idx;
2774 int i;
2775
2776 /* This could be made a lot more efficient, but for now... */
2777 cp2 = NULL;
2778 for (idx = 0; idx < hdw->control_cnt; idx++) {
2779 cptr = hdw->controls + idx;
2780 i = cptr->info->v4l_id;
2781 if (!i) continue;
2782 if (i <= ctl_id) continue;
2783 if (cp2 && (cp2->info->v4l_id < i)) continue;
2784 cp2 = cptr;
2785 }
2786 return cp2;
2787 return NULL;
2788 }
2789
2790
2791 static const char *get_ctrl_typename(enum pvr2_ctl_type tp)
2792 {
2793 switch (tp) {
2794 case pvr2_ctl_int: return "integer";
2795 case pvr2_ctl_enum: return "enum";
2796 case pvr2_ctl_bool: return "boolean";
2797 case pvr2_ctl_bitmask: return "bitmask";
2798 }
2799 return "";
2800 }
2801
2802
2803 static void pvr2_subdev_set_control(struct pvr2_hdw *hdw, int id,
2804 const char *name, int val)
2805 {
2806 struct v4l2_control ctrl;
2807 struct v4l2_subdev *sd;
2808
2809 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 %s=%d", name, val);
2810 memset(&ctrl, 0, sizeof(ctrl));
2811 ctrl.id = id;
2812 ctrl.value = val;
2813
2814 v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev)
2815 v4l2_s_ctrl(NULL, sd->ctrl_handler, &ctrl);
2816 }
2817
2818 #define PVR2_SUBDEV_SET_CONTROL(hdw, id, lab) \
2819 if ((hdw)->lab##_dirty || (hdw)->force_dirty) { \
2820 pvr2_subdev_set_control(hdw, id, #lab, (hdw)->lab##_val); \
2821 }
2822
2823 static v4l2_std_id pvr2_hdw_get_detected_std(struct pvr2_hdw *hdw)
2824 {
2825 v4l2_std_id std;
2826 std = (v4l2_std_id)hdw->std_mask_avail;
2827 v4l2_device_call_all(&hdw->v4l2_dev, 0,
2828 video, querystd, &std);
2829 return std;
2830 }
2831
2832 /* Execute whatever commands are required to update the state of all the
2833 sub-devices so that they match our current control values. */
2834 static void pvr2_subdev_update(struct pvr2_hdw *hdw)
2835 {
2836 struct v4l2_subdev *sd;
2837 unsigned int id;
2838 pvr2_subdev_update_func fp;
2839
2840 pvr2_trace(PVR2_TRACE_CHIPS, "subdev update...");
2841
2842 if (hdw->tuner_updated || hdw->force_dirty) {
2843 struct tuner_setup setup;
2844 pvr2_trace(PVR2_TRACE_CHIPS, "subdev tuner set_type(%d)",
2845 hdw->tuner_type);
2846 if (((int)(hdw->tuner_type)) >= 0) {
2847 memset(&setup, 0, sizeof(setup));
2848 setup.addr = ADDR_UNSET;
2849 setup.type = hdw->tuner_type;
2850 setup.mode_mask = T_RADIO | T_ANALOG_TV;
2851 v4l2_device_call_all(&hdw->v4l2_dev, 0,
2852 tuner, s_type_addr, &setup);
2853 }
2854 }
2855
2856 if (hdw->input_dirty || hdw->std_dirty || hdw->force_dirty) {
2857 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_standard");
2858 if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
2859 v4l2_device_call_all(&hdw->v4l2_dev, 0,
2860 tuner, s_radio);
2861 } else {
2862 v4l2_std_id vs;
2863 vs = hdw->std_mask_cur;
2864 v4l2_device_call_all(&hdw->v4l2_dev, 0,
2865 video, s_std, vs);
2866 pvr2_hdw_cx25840_vbi_hack(hdw);
2867 }
2868 hdw->tuner_signal_stale = !0;
2869 hdw->cropcap_stale = !0;
2870 }
2871
2872 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_BRIGHTNESS, brightness);
2873 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_CONTRAST, contrast);
2874 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_SATURATION, saturation);
2875 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_HUE, hue);
2876 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_MUTE, mute);
2877 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_VOLUME, volume);
2878 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BALANCE, balance);
2879 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BASS, bass);
2880 PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_TREBLE, treble);
2881
2882 if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) {
2883 struct v4l2_tuner vt;
2884 memset(&vt, 0, sizeof(vt));
2885 vt.type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
2886 V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
2887 vt.audmode = hdw->audiomode_val;
2888 v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt);
2889 }
2890
2891 if (hdw->freqDirty || hdw->force_dirty) {
2892 unsigned long fv;
2893 struct v4l2_frequency freq;
2894 fv = pvr2_hdw_get_cur_freq(hdw);
2895 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_freq(%lu)", fv);
2896 if (hdw->tuner_signal_stale) pvr2_hdw_status_poll(hdw);
2897 memset(&freq, 0, sizeof(freq));
2898 if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) {
2899 /* ((fv * 1000) / 62500) */
2900 freq.frequency = (fv * 2) / 125;
2901 } else {
2902 freq.frequency = fv / 62500;
2903 }
2904 /* tuner-core currently doesn't seem to care about this, but
2905 let's set it anyway for completeness. */
2906 if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
2907 freq.type = V4L2_TUNER_RADIO;
2908 } else {
2909 freq.type = V4L2_TUNER_ANALOG_TV;
2910 }
2911 freq.tuner = 0;
2912 v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner,
2913 s_frequency, &freq);
2914 }
2915
2916 if (hdw->res_hor_dirty || hdw->res_ver_dirty || hdw->force_dirty) {
2917 struct v4l2_subdev_format format = {
2918 .which = V4L2_SUBDEV_FORMAT_ACTIVE,
2919 };
2920
2921 format.format.width = hdw->res_hor_val;
2922 format.format.height = hdw->res_ver_val;
2923 format.format.code = MEDIA_BUS_FMT_FIXED;
2924 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_size(%dx%d)",
2925 format.format.width, format.format.height);
2926 v4l2_device_call_all(&hdw->v4l2_dev, 0, pad, set_fmt,
2927 NULL, &format);
2928 }
2929
2930 if (hdw->srate_dirty || hdw->force_dirty) {
2931 u32 val;
2932 pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_audio %d",
2933 hdw->srate_val);
2934 switch (hdw->srate_val) {
2935 default:
2936 case V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000:
2937 val = 48000;
2938 break;
2939 case V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100:
2940 val = 44100;
2941 break;
2942 case V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000:
2943 val = 32000;
2944 break;
2945 }
2946 v4l2_device_call_all(&hdw->v4l2_dev, 0,
2947 audio, s_clock_freq, val);
2948 }
2949
2950 /* Unable to set crop parameters; there is apparently no equivalent
2951 for VIDIOC_S_CROP */
2952
2953 v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) {
2954 id = sd->grp_id;
2955 if (id >= ARRAY_SIZE(pvr2_module_update_functions)) continue;
2956 fp = pvr2_module_update_functions[id];
2957 if (!fp) continue;
2958 (*fp)(hdw, sd);
2959 }
2960
2961 if (hdw->tuner_signal_stale || hdw->cropcap_stale) {
2962 pvr2_hdw_status_poll(hdw);
2963 }
2964 }
2965
2966
2967 /* Figure out if we need to commit control changes. If so, mark internal
2968 state flags to indicate this fact and return true. Otherwise do nothing
2969 else and return false. */
2970 static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw)
2971 {
2972 unsigned int idx;
2973 struct pvr2_ctrl *cptr;
2974 int value;
2975 int commit_flag = hdw->force_dirty;
2976 char buf[100];
2977 unsigned int bcnt,ccnt;
2978
2979 for (idx = 0; idx < hdw->control_cnt; idx++) {
2980 cptr = hdw->controls + idx;
2981 if (!cptr->info->is_dirty) continue;
2982 if (!cptr->info->is_dirty(cptr)) continue;
2983 commit_flag = !0;
2984
2985 if (!(pvrusb2_debug & PVR2_TRACE_CTL)) continue;
2986 bcnt = scnprintf(buf,sizeof(buf),"\"%s\" <-- ",
2987 cptr->info->name);
2988 value = 0;
2989 cptr->info->get_value(cptr,&value);
2990 pvr2_ctrl_value_to_sym_internal(cptr,~0,value,
2991 buf+bcnt,
2992 sizeof(buf)-bcnt,&ccnt);
2993 bcnt += ccnt;
2994 bcnt += scnprintf(buf+bcnt,sizeof(buf)-bcnt," <%s>",
2995 get_ctrl_typename(cptr->info->type));
2996 pvr2_trace(PVR2_TRACE_CTL,
2997 "/*--TRACE_COMMIT--*/ %.*s",
2998 bcnt,buf);
2999 }
3000
3001 if (!commit_flag) {
3002 /* Nothing has changed */
3003 return 0;
3004 }
3005
3006 hdw->state_pipeline_config = 0;
3007 trace_stbit("state_pipeline_config",hdw->state_pipeline_config);
3008 pvr2_hdw_state_sched(hdw);
3009
3010 return !0;
3011 }
3012
3013
3014 /* Perform all operations needed to commit all control changes. This must
3015 be performed in synchronization with the pipeline state and is thus
3016 expected to be called as part of the driver's worker thread. Return
3017 true if commit successful, otherwise return false to indicate that
3018 commit isn't possible at this time. */
3019 static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw)
3020 {
3021 unsigned int idx;
3022 struct pvr2_ctrl *cptr;
3023 int disruptive_change;
3024
3025 if (hdw->input_dirty && hdw->state_pathway_ok &&
3026 (((hdw->input_val == PVR2_CVAL_INPUT_DTV) ?
3027 PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG) !=
3028 hdw->pathway_state)) {
3029 /* Change of mode being asked for... */
3030 hdw->state_pathway_ok = 0;
3031 trace_stbit("state_pathway_ok", hdw->state_pathway_ok);
3032 }
3033 if (!hdw->state_pathway_ok) {
3034 /* Can't commit anything until pathway is ok. */
3035 return 0;
3036 }
3037
3038 /* Handle some required side effects when the video standard is
3039 changed.... */
3040 if (hdw->std_dirty) {
3041 int nvres;
3042 int gop_size;
3043 if (hdw->std_mask_cur & V4L2_STD_525_60) {
3044 nvres = 480;
3045 gop_size = 15;
3046 } else {
3047 nvres = 576;
3048 gop_size = 12;
3049 }
3050 /* Rewrite the vertical resolution to be appropriate to the
3051 video standard that has been selected. */
3052 if (nvres != hdw->res_ver_val) {
3053 hdw->res_ver_val = nvres;
3054 hdw->res_ver_dirty = !0;
3055 }
3056 /* Rewrite the GOP size to be appropriate to the video
3057 standard that has been selected. */
3058 if (gop_size != hdw->enc_ctl_state.video_gop_size) {
3059 struct v4l2_ext_controls cs;
3060 struct v4l2_ext_control c1;
3061 memset(&cs, 0, sizeof(cs));
3062 memset(&c1, 0, sizeof(c1));
3063 cs.controls = &c1;
3064 cs.count = 1;
3065 c1.id = V4L2_CID_MPEG_VIDEO_GOP_SIZE;
3066 c1.value = gop_size;
3067 cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs,
3068 VIDIOC_S_EXT_CTRLS);
3069 }
3070 }
3071
3072 /* The broadcast decoder can only scale down, so if
3073 * res_*_dirty && crop window < output format ==> enlarge crop.
3074 *
3075 * The mpeg encoder receives fields of res_hor_val dots and
3076 * res_ver_val halflines. Limits: hor<=720, ver<=576.
3077 */
3078 if (hdw->res_hor_dirty && hdw->cropw_val < hdw->res_hor_val) {
3079 hdw->cropw_val = hdw->res_hor_val;
3080 hdw->cropw_dirty = !0;
3081 } else if (hdw->cropw_dirty) {
3082 hdw->res_hor_dirty = !0; /* must rescale */
3083 hdw->res_hor_val = min(720, hdw->cropw_val);
3084 }
3085 if (hdw->res_ver_dirty && hdw->croph_val < hdw->res_ver_val) {
3086 hdw->croph_val = hdw->res_ver_val;
3087 hdw->croph_dirty = !0;
3088 } else if (hdw->croph_dirty) {
3089 int nvres = hdw->std_mask_cur & V4L2_STD_525_60 ? 480 : 576;
3090 hdw->res_ver_dirty = !0;
3091 hdw->res_ver_val = min(nvres, hdw->croph_val);
3092 }
3093
3094 /* If any of the below has changed, then we can't do the update
3095 while the pipeline is running. Pipeline must be paused first
3096 and decoder -> encoder connection be made quiescent before we
3097 can proceed. */
3098 disruptive_change =
3099 (hdw->std_dirty ||
3100 hdw->enc_unsafe_stale ||
3101 hdw->srate_dirty ||
3102 hdw->res_ver_dirty ||
3103 hdw->res_hor_dirty ||
3104 hdw->cropw_dirty ||
3105 hdw->croph_dirty ||
3106 hdw->input_dirty ||
3107 (hdw->active_stream_type != hdw->desired_stream_type));
3108 if (disruptive_change && !hdw->state_pipeline_idle) {
3109 /* Pipeline is not idle; we can't proceed. Arrange to
3110 cause pipeline to stop so that we can try this again
3111 later.... */
3112 hdw->state_pipeline_pause = !0;
3113 return 0;
3114 }
3115
3116 if (hdw->srate_dirty) {
3117 /* Write new sample rate into control structure since
3118 * the master copy is stale. We must track srate
3119 * separate from the mpeg control structure because
3120 * other logic also uses this value. */
3121 struct v4l2_ext_controls cs;
3122 struct v4l2_ext_control c1;
3123 memset(&cs,0,sizeof(cs));
3124 memset(&c1,0,sizeof(c1));
3125 cs.controls = &c1;
3126 cs.count = 1;
3127 c1.id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ;
3128 c1.value = hdw->srate_val;
3129 cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs,VIDIOC_S_EXT_CTRLS);
3130 }
3131
3132 if (hdw->active_stream_type != hdw->desired_stream_type) {
3133 /* Handle any side effects of stream config here */
3134 hdw->active_stream_type = hdw->desired_stream_type;
3135 }
3136
3137 if (hdw->hdw_desc->signal_routing_scheme ==
3138 PVR2_ROUTING_SCHEME_GOTVIEW) {
3139 u32 b;
3140 /* Handle GOTVIEW audio switching */
3141 pvr2_hdw_gpio_get_out(hdw,&b);
3142 if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
3143 /* Set GPIO 11 */
3144 pvr2_hdw_gpio_chg_out(hdw,(1 << 11),~0);
3145 } else {
3146 /* Clear GPIO 11 */
3147 pvr2_hdw_gpio_chg_out(hdw,(1 << 11),0);
3148 }
3149 }
3150
3151 /* Check and update state for all sub-devices. */
3152 pvr2_subdev_update(hdw);
3153
3154 hdw->tuner_updated = 0;
3155 hdw->force_dirty = 0;
3156 for (idx = 0; idx < hdw->control_cnt; idx++) {
3157 cptr = hdw->controls + idx;
3158 if (!cptr->info->clear_dirty) continue;
3159 cptr->info->clear_dirty(cptr);
3160 }
3161
3162 if ((hdw->pathway_state == PVR2_PATHWAY_ANALOG) &&
3163 hdw->state_encoder_run) {
3164 /* If encoder isn't running or it can't be touched, then
3165 this will get worked out later when we start the
3166 encoder. */
3167 if (pvr2_encoder_adjust(hdw) < 0) return !0;
3168 }
3169
3170 hdw->state_pipeline_config = !0;
3171 /* Hardware state may have changed in a way to cause the cropping
3172 capabilities to have changed. So mark it stale, which will
3173 cause a later re-fetch. */
3174 trace_stbit("state_pipeline_config",hdw->state_pipeline_config);
3175 return !0;
3176 }
3177
3178
3179 int pvr2_hdw_commit_ctl(struct pvr2_hdw *hdw)
3180 {
3181 int fl;
3182 LOCK_TAKE(hdw->big_lock);
3183 fl = pvr2_hdw_commit_setup(hdw);
3184 LOCK_GIVE(hdw->big_lock);
3185 if (!fl) return 0;
3186 return pvr2_hdw_wait(hdw,0);
3187 }
3188
3189
3190 static void pvr2_hdw_worker_poll(struct work_struct *work)
3191 {
3192 int fl = 0;
3193 struct pvr2_hdw *hdw = container_of(work,struct pvr2_hdw,workpoll);
3194 LOCK_TAKE(hdw->big_lock); do {
3195 fl = pvr2_hdw_state_eval(hdw);
3196 } while (0); LOCK_GIVE(hdw->big_lock);
3197 if (fl && hdw->state_func) {
3198 hdw->state_func(hdw->state_data);
3199 }
3200 }
3201
3202
3203 static int pvr2_hdw_wait(struct pvr2_hdw *hdw,int state)
3204 {
3205 return wait_event_interruptible(
3206 hdw->state_wait_data,
3207 (hdw->state_stale == 0) &&
3208 (!state || (hdw->master_state != state)));
3209 }
3210
3211
3212 /* Return name for this driver instance */
3213 const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw)
3214 {
3215 return hdw->name;
3216 }
3217
3218
3219 const char *pvr2_hdw_get_desc(struct pvr2_hdw *hdw)
3220 {
3221 return hdw->hdw_desc->description;
3222 }
3223
3224
3225 const char *pvr2_hdw_get_type(struct pvr2_hdw *hdw)
3226 {
3227 return hdw->hdw_desc->shortname;
3228 }
3229
3230
3231 int pvr2_hdw_is_hsm(struct pvr2_hdw *hdw)
3232 {
3233 int result;
3234 LOCK_TAKE(hdw->ctl_lock); do {
3235 hdw->cmd_buffer[0] = FX2CMD_GET_USB_SPEED;
3236 result = pvr2_send_request(hdw,
3237 hdw->cmd_buffer,1,
3238 hdw->cmd_buffer,1);
3239 if (result < 0) break;
3240 result = (hdw->cmd_buffer[0] != 0);
3241 } while(0); LOCK_GIVE(hdw->ctl_lock);
3242 return result;
3243 }
3244
3245
3246 /* Execute poll of tuner status */
3247 void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *hdw)
3248 {
3249 LOCK_TAKE(hdw->big_lock); do {
3250 pvr2_hdw_status_poll(hdw);
3251 } while (0); LOCK_GIVE(hdw->big_lock);
3252 }
3253
3254
3255 static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw)
3256 {
3257 if (!hdw->cropcap_stale) {
3258 return 0;
3259 }
3260 pvr2_hdw_status_poll(hdw);
3261 if (hdw->cropcap_stale) {
3262 return -EIO;
3263 }
3264 return 0;
3265 }
3266
3267
3268 /* Return information about cropping capabilities */
3269 int pvr2_hdw_get_cropcap(struct pvr2_hdw *hdw, struct v4l2_cropcap *pp)
3270 {
3271 int stat = 0;
3272 LOCK_TAKE(hdw->big_lock);
3273 stat = pvr2_hdw_check_cropcap(hdw);
3274 if (!stat) {
3275 memcpy(pp, &hdw->cropcap_info, sizeof(hdw->cropcap_info));
3276 }
3277 LOCK_GIVE(hdw->big_lock);
3278 return stat;
3279 }
3280
3281
3282 /* Return information about the tuner */
3283 int pvr2_hdw_get_tuner_status(struct pvr2_hdw *hdw,struct v4l2_tuner *vtp)
3284 {
3285 LOCK_TAKE(hdw->big_lock); do {
3286 if (hdw->tuner_signal_stale) {
3287 pvr2_hdw_status_poll(hdw);
3288 }
3289 memcpy(vtp,&hdw->tuner_signal_info,sizeof(struct v4l2_tuner));
3290 } while (0); LOCK_GIVE(hdw->big_lock);
3291 return 0;
3292 }
3293
3294
3295 /* Get handle to video output stream */
3296 struct pvr2_stream *pvr2_hdw_get_video_stream(struct pvr2_hdw *hp)
3297 {
3298 return hp->vid_stream;
3299 }
3300
3301
3302 void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw)
3303 {
3304 int nr = pvr2_hdw_get_unit_number(hdw);
3305 LOCK_TAKE(hdw->big_lock);
3306 do {
3307 pr_info("pvrusb2: ================= START STATUS CARD #%d =================\n", nr);
3308 v4l2_device_call_all(&hdw->v4l2_dev, 0, core, log_status);
3309 pvr2_trace(PVR2_TRACE_INFO,"cx2341x config:");
3310 cx2341x_log_status(&hdw->enc_ctl_state, "pvrusb2");
3311 pvr2_hdw_state_log_state(hdw);
3312 pr_info("pvrusb2: ================== END STATUS CARD #%d ==================\n", nr);
3313 } while (0);
3314 LOCK_GIVE(hdw->big_lock);
3315 }
3316
3317
3318 /* Grab EEPROM contents, needed for direct method. */
3319 #define EEPROM_SIZE 8192
3320 #define trace_eeprom(...) pvr2_trace(PVR2_TRACE_EEPROM,__VA_ARGS__)
3321 static u8 *pvr2_full_eeprom_fetch(struct pvr2_hdw *hdw)
3322 {
3323 struct i2c_msg msg[2];
3324 u8 *eeprom;
3325 u8 iadd[2];
3326 u8 addr;
3327 u16 eepromSize;
3328 unsigned int offs;
3329 int ret;
3330 int mode16 = 0;
3331 unsigned pcnt,tcnt;
3332 eeprom = kzalloc(EEPROM_SIZE, GFP_KERNEL);
3333 if (!eeprom) {
3334 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3335 "Failed to allocate memory required to read eeprom");
3336 return NULL;
3337 }
3338
3339 trace_eeprom("Value for eeprom addr from controller was 0x%x",
3340 hdw->eeprom_addr);
3341 addr = hdw->eeprom_addr;
3342 /* Seems that if the high bit is set, then the *real* eeprom
3343 address is shifted right now bit position (noticed this in
3344 newer PVR USB2 hardware) */
3345 if (addr & 0x80) addr >>= 1;
3346
3347 /* FX2 documentation states that a 16bit-addressed eeprom is
3348 expected if the I2C address is an odd number (yeah, this is
3349 strange but it's what they do) */
3350 mode16 = (addr & 1);
3351 eepromSize = (mode16 ? EEPROM_SIZE : 256);
3352 trace_eeprom("Examining %d byte eeprom at location 0x%x using %d bit addressing",
3353 eepromSize, addr,
3354 mode16 ? 16 : 8);
3355
3356 msg[0].addr = addr;
3357 msg[0].flags = 0;
3358 msg[0].len = mode16 ? 2 : 1;
3359 msg[0].buf = iadd;
3360 msg[1].addr = addr;
3361 msg[1].flags = I2C_M_RD;
3362
3363 /* We have to do the actual eeprom data fetch ourselves, because
3364 (1) we're only fetching part of the eeprom, and (2) if we were
3365 getting the whole thing our I2C driver can't grab it in one
3366 pass - which is what tveeprom is otherwise going to attempt */
3367 for (tcnt = 0; tcnt < EEPROM_SIZE; tcnt += pcnt) {
3368 pcnt = 16;
3369 if (pcnt + tcnt > EEPROM_SIZE) pcnt = EEPROM_SIZE-tcnt;
3370 offs = tcnt + (eepromSize - EEPROM_SIZE);
3371 if (mode16) {
3372 iadd[0] = offs >> 8;
3373 iadd[1] = offs;
3374 } else {
3375 iadd[0] = offs;
3376 }
3377 msg[1].len = pcnt;
3378 msg[1].buf = eeprom+tcnt;
3379 if ((ret = i2c_transfer(&hdw->i2c_adap,
3380 msg,ARRAY_SIZE(msg))) != 2) {
3381 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3382 "eeprom fetch set offs err=%d",ret);
3383 kfree(eeprom);
3384 return NULL;
3385 }
3386 }
3387 return eeprom;
3388 }
3389
3390
3391 void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw,
3392 int mode,
3393 int enable_flag)
3394 {
3395 int ret;
3396 u16 address;
3397 unsigned int pipe;
3398 LOCK_TAKE(hdw->big_lock); do {
3399 if ((hdw->fw_buffer == NULL) == !enable_flag) break;
3400
3401 if (!enable_flag) {
3402 pvr2_trace(PVR2_TRACE_FIRMWARE,
3403 "Cleaning up after CPU firmware fetch");
3404 kfree(hdw->fw_buffer);
3405 hdw->fw_buffer = NULL;
3406 hdw->fw_size = 0;
3407 if (hdw->fw_cpu_flag) {
3408 /* Now release the CPU. It will disconnect
3409 and reconnect later. */
3410 pvr2_hdw_cpureset_assert(hdw,0);
3411 }
3412 break;
3413 }
3414
3415 hdw->fw_cpu_flag = (mode != 2);
3416 if (hdw->fw_cpu_flag) {
3417 hdw->fw_size = (mode == 1) ? 0x4000 : 0x2000;
3418 pvr2_trace(PVR2_TRACE_FIRMWARE,
3419 "Preparing to suck out CPU firmware (size=%u)",
3420 hdw->fw_size);
3421 hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL);
3422 if (!hdw->fw_buffer) {
3423 hdw->fw_size = 0;
3424 break;
3425 }
3426
3427 /* We have to hold the CPU during firmware upload. */
3428 pvr2_hdw_cpureset_assert(hdw,1);
3429
3430 /* download the firmware from address 0000-1fff in 2048
3431 (=0x800) bytes chunk. */
3432
3433 pvr2_trace(PVR2_TRACE_FIRMWARE,
3434 "Grabbing CPU firmware");
3435 pipe = usb_rcvctrlpipe(hdw->usb_dev, 0);
3436 for(address = 0; address < hdw->fw_size;
3437 address += 0x800) {
3438 ret = usb_control_msg(hdw->usb_dev,pipe,
3439 0xa0,0xc0,
3440 address,0,
3441 hdw->fw_buffer+address,
3442 0x800,HZ);
3443 if (ret < 0) break;
3444 }
3445
3446 pvr2_trace(PVR2_TRACE_FIRMWARE,
3447 "Done grabbing CPU firmware");
3448 } else {
3449 pvr2_trace(PVR2_TRACE_FIRMWARE,
3450 "Sucking down EEPROM contents");
3451 hdw->fw_buffer = pvr2_full_eeprom_fetch(hdw);
3452 if (!hdw->fw_buffer) {
3453 pvr2_trace(PVR2_TRACE_FIRMWARE,
3454 "EEPROM content suck failed.");
3455 break;
3456 }
3457 hdw->fw_size = EEPROM_SIZE;
3458 pvr2_trace(PVR2_TRACE_FIRMWARE,
3459 "Done sucking down EEPROM contents");
3460 }
3461
3462 } while (0); LOCK_GIVE(hdw->big_lock);
3463 }
3464
3465
3466 /* Return true if we're in a mode for retrieval CPU firmware */
3467 int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *hdw)
3468 {
3469 return hdw->fw_buffer != NULL;
3470 }
3471
3472
3473 int pvr2_hdw_cpufw_get(struct pvr2_hdw *hdw,unsigned int offs,
3474 char *buf,unsigned int cnt)
3475 {
3476 int ret = -EINVAL;
3477 LOCK_TAKE(hdw->big_lock); do {
3478 if (!buf) break;
3479 if (!cnt) break;
3480
3481 if (!hdw->fw_buffer) {
3482 ret = -EIO;
3483 break;
3484 }
3485
3486 if (offs >= hdw->fw_size) {
3487 pvr2_trace(PVR2_TRACE_FIRMWARE,
3488 "Read firmware data offs=%d EOF",
3489 offs);
3490 ret = 0;
3491 break;
3492 }
3493
3494 if (offs + cnt > hdw->fw_size) cnt = hdw->fw_size - offs;
3495
3496 memcpy(buf,hdw->fw_buffer+offs,cnt);
3497
3498 pvr2_trace(PVR2_TRACE_FIRMWARE,
3499 "Read firmware data offs=%d cnt=%d",
3500 offs,cnt);
3501 ret = cnt;
3502 } while (0); LOCK_GIVE(hdw->big_lock);
3503
3504 return ret;
3505 }
3506
3507
3508 int pvr2_hdw_v4l_get_minor_number(struct pvr2_hdw *hdw,
3509 enum pvr2_v4l_type index)
3510 {
3511 switch (index) {
3512 case pvr2_v4l_type_video: return hdw->v4l_minor_number_video;
3513 case pvr2_v4l_type_vbi: return hdw->v4l_minor_number_vbi;
3514 case pvr2_v4l_type_radio: return hdw->v4l_minor_number_radio;
3515 default: return -1;
3516 }
3517 }
3518
3519
3520 /* Store a v4l minor device number */
3521 void pvr2_hdw_v4l_store_minor_number(struct pvr2_hdw *hdw,
3522 enum pvr2_v4l_type index,int v)
3523 {
3524 switch (index) {
3525 case pvr2_v4l_type_video: hdw->v4l_minor_number_video = v;break;
3526 case pvr2_v4l_type_vbi: hdw->v4l_minor_number_vbi = v;break;
3527 case pvr2_v4l_type_radio: hdw->v4l_minor_number_radio = v;break;
3528 default: break;
3529 }
3530 }
3531
3532
3533 static void pvr2_ctl_write_complete(struct urb *urb)
3534 {
3535 struct pvr2_hdw *hdw = urb->context;
3536 hdw->ctl_write_pend_flag = 0;
3537 if (hdw->ctl_read_pend_flag) return;
3538 complete(&hdw->ctl_done);
3539 }
3540
3541
3542 static void pvr2_ctl_read_complete(struct urb *urb)
3543 {
3544 struct pvr2_hdw *hdw = urb->context;
3545 hdw->ctl_read_pend_flag = 0;
3546 if (hdw->ctl_write_pend_flag) return;
3547 complete(&hdw->ctl_done);
3548 }
3549
3550 struct hdw_timer {
3551 struct timer_list timer;
3552 struct pvr2_hdw *hdw;
3553 };
3554
3555 static void pvr2_ctl_timeout(struct timer_list *t)
3556 {
3557 struct hdw_timer *timer = from_timer(timer, t, timer);
3558 struct pvr2_hdw *hdw = timer->hdw;
3559
3560 if (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) {
3561 hdw->ctl_timeout_flag = !0;
3562 if (hdw->ctl_write_pend_flag)
3563 usb_unlink_urb(hdw->ctl_write_urb);
3564 if (hdw->ctl_read_pend_flag)
3565 usb_unlink_urb(hdw->ctl_read_urb);
3566 }
3567 }
3568
3569
3570 /* Issue a command and get a response from the device. This extended
3571 version includes a probe flag (which if set means that device errors
3572 should not be logged or treated as fatal) and a timeout in jiffies.
3573 This can be used to non-lethally probe the health of endpoint 1. */
3574 static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
3575 unsigned int timeout,int probe_fl,
3576 void *write_data,unsigned int write_len,
3577 void *read_data,unsigned int read_len)
3578 {
3579 unsigned int idx;
3580 int status = 0;
3581 struct hdw_timer timer = {
3582 .hdw = hdw,
3583 };
3584
3585 if (!hdw->ctl_lock_held) {
3586 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3587 "Attempted to execute control transfer without lock!!");
3588 return -EDEADLK;
3589 }
3590 if (!hdw->flag_ok && !probe_fl) {
3591 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3592 "Attempted to execute control transfer when device not ok");
3593 return -EIO;
3594 }
3595 if (!(hdw->ctl_read_urb && hdw->ctl_write_urb)) {
3596 if (!probe_fl) {
3597 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3598 "Attempted to execute control transfer when USB is disconnected");
3599 }
3600 return -ENOTTY;
3601 }
3602
3603 /* Ensure that we have sane parameters */
3604 if (!write_data) write_len = 0;
3605 if (!read_data) read_len = 0;
3606 if (write_len > PVR2_CTL_BUFFSIZE) {
3607 pvr2_trace(
3608 PVR2_TRACE_ERROR_LEGS,
3609 "Attempted to execute %d byte control-write transfer (limit=%d)",
3610 write_len,PVR2_CTL_BUFFSIZE);
3611 return -EINVAL;
3612 }
3613 if (read_len > PVR2_CTL_BUFFSIZE) {
3614 pvr2_trace(
3615 PVR2_TRACE_ERROR_LEGS,
3616 "Attempted to execute %d byte control-read transfer (limit=%d)",
3617 write_len,PVR2_CTL_BUFFSIZE);
3618 return -EINVAL;
3619 }
3620 if ((!write_len) && (!read_len)) {
3621 pvr2_trace(
3622 PVR2_TRACE_ERROR_LEGS,
3623 "Attempted to execute null control transfer?");
3624 return -EINVAL;
3625 }
3626
3627
3628 hdw->cmd_debug_state = 1;
3629 if (write_len && write_data)
3630 hdw->cmd_debug_code = ((unsigned char *)write_data)[0];
3631 else
3632 hdw->cmd_debug_code = 0;
3633 hdw->cmd_debug_write_len = write_len;
3634 hdw->cmd_debug_read_len = read_len;
3635
3636 /* Initialize common stuff */
3637 init_completion(&hdw->ctl_done);
3638 hdw->ctl_timeout_flag = 0;
3639 hdw->ctl_write_pend_flag = 0;
3640 hdw->ctl_read_pend_flag = 0;
3641 timer_setup_on_stack(&timer.timer, pvr2_ctl_timeout, 0);
3642 timer.timer.expires = jiffies + timeout;
3643
3644 if (write_len && write_data) {
3645 hdw->cmd_debug_state = 2;
3646 /* Transfer write data to internal buffer */
3647 for (idx = 0; idx < write_len; idx++) {
3648 hdw->ctl_write_buffer[idx] =
3649 ((unsigned char *)write_data)[idx];
3650 }
3651 /* Initiate a write request */
3652 usb_fill_bulk_urb(hdw->ctl_write_urb,
3653 hdw->usb_dev,
3654 usb_sndbulkpipe(hdw->usb_dev,
3655 PVR2_CTL_WRITE_ENDPOINT),
3656 hdw->ctl_write_buffer,
3657 write_len,
3658 pvr2_ctl_write_complete,
3659 hdw);
3660 hdw->ctl_write_urb->actual_length = 0;
3661 hdw->ctl_write_pend_flag = !0;
3662 if (usb_urb_ep_type_check(hdw->ctl_write_urb)) {
3663 pvr2_trace(
3664 PVR2_TRACE_ERROR_LEGS,
3665 "Invalid write control endpoint");
3666 return -EINVAL;
3667 }
3668 status = usb_submit_urb(hdw->ctl_write_urb,GFP_KERNEL);
3669 if (status < 0) {
3670 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3671 "Failed to submit write-control URB status=%d",
3672 status);
3673 hdw->ctl_write_pend_flag = 0;
3674 goto done;
3675 }
3676 }
3677
3678 if (read_len) {
3679 hdw->cmd_debug_state = 3;
3680 memset(hdw->ctl_read_buffer,0x43,read_len);
3681 /* Initiate a read request */
3682 usb_fill_bulk_urb(hdw->ctl_read_urb,
3683 hdw->usb_dev,
3684 usb_rcvbulkpipe(hdw->usb_dev,
3685 PVR2_CTL_READ_ENDPOINT),
3686 hdw->ctl_read_buffer,
3687 read_len,
3688 pvr2_ctl_read_complete,
3689 hdw);
3690 hdw->ctl_read_urb->actual_length = 0;
3691 hdw->ctl_read_pend_flag = !0;
3692 if (usb_urb_ep_type_check(hdw->ctl_read_urb)) {
3693 pvr2_trace(
3694 PVR2_TRACE_ERROR_LEGS,
3695 "Invalid read control endpoint");
3696 return -EINVAL;
3697 }
3698 status = usb_submit_urb(hdw->ctl_read_urb,GFP_KERNEL);
3699 if (status < 0) {
3700 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3701 "Failed to submit read-control URB status=%d",
3702 status);
3703 hdw->ctl_read_pend_flag = 0;
3704 goto done;
3705 }
3706 }
3707
3708 /* Start timer */
3709 add_timer(&timer.timer);
3710
3711 /* Now wait for all I/O to complete */
3712 hdw->cmd_debug_state = 4;
3713 while (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) {
3714 wait_for_completion(&hdw->ctl_done);
3715 }
3716 hdw->cmd_debug_state = 5;
3717
3718 /* Stop timer */
3719 del_timer_sync(&timer.timer);
3720
3721 hdw->cmd_debug_state = 6;
3722 status = 0;
3723
3724 if (hdw->ctl_timeout_flag) {
3725 status = -ETIMEDOUT;
3726 if (!probe_fl) {
3727 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3728 "Timed out control-write");
3729 }
3730 goto done;
3731 }
3732
3733 if (write_len) {
3734 /* Validate results of write request */
3735 if ((hdw->ctl_write_urb->status != 0) &&
3736 (hdw->ctl_write_urb->status != -ENOENT) &&
3737 (hdw->ctl_write_urb->status != -ESHUTDOWN) &&
3738 (hdw->ctl_write_urb->status != -ECONNRESET)) {
3739 /* USB subsystem is reporting some kind of failure
3740 on the write */
3741 status = hdw->ctl_write_urb->status;
3742 if (!probe_fl) {
3743 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3744 "control-write URB failure, status=%d",
3745 status);
3746 }
3747 goto done;
3748 }
3749 if (hdw->ctl_write_urb->actual_length < write_len) {
3750 /* Failed to write enough data */
3751 status = -EIO;
3752 if (!probe_fl) {
3753 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3754 "control-write URB short, expected=%d got=%d",
3755 write_len,
3756 hdw->ctl_write_urb->actual_length);
3757 }
3758 goto done;
3759 }
3760 }
3761 if (read_len && read_data) {
3762 /* Validate results of read request */
3763 if ((hdw->ctl_read_urb->status != 0) &&
3764 (hdw->ctl_read_urb->status != -ENOENT) &&
3765 (hdw->ctl_read_urb->status != -ESHUTDOWN) &&
3766 (hdw->ctl_read_urb->status != -ECONNRESET)) {
3767 /* USB subsystem is reporting some kind of failure
3768 on the read */
3769 status = hdw->ctl_read_urb->status;
3770 if (!probe_fl) {
3771 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3772 "control-read URB failure, status=%d",
3773 status);
3774 }
3775 goto done;
3776 }
3777 if (hdw->ctl_read_urb->actual_length < read_len) {
3778 /* Failed to read enough data */
3779 status = -EIO;
3780 if (!probe_fl) {
3781 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3782 "control-read URB short, expected=%d got=%d",
3783 read_len,
3784 hdw->ctl_read_urb->actual_length);
3785 }
3786 goto done;
3787 }
3788 /* Transfer retrieved data out from internal buffer */
3789 for (idx = 0; idx < read_len; idx++) {
3790 ((unsigned char *)read_data)[idx] =
3791 hdw->ctl_read_buffer[idx];
3792 }
3793 }
3794
3795 done:
3796
3797 hdw->cmd_debug_state = 0;
3798 if ((status < 0) && (!probe_fl)) {
3799 pvr2_hdw_render_useless(hdw);
3800 }
3801 destroy_timer_on_stack(&timer.timer);
3802
3803 return status;
3804 }
3805
3806
3807 int pvr2_send_request(struct pvr2_hdw *hdw,
3808 void *write_data,unsigned int write_len,
3809 void *read_data,unsigned int read_len)
3810 {
3811 return pvr2_send_request_ex(hdw,HZ*4,0,
3812 write_data,write_len,
3813 read_data,read_len);
3814 }
3815
3816
3817 static int pvr2_issue_simple_cmd(struct pvr2_hdw *hdw,u32 cmdcode)
3818 {
3819 int ret;
3820 unsigned int cnt = 1;
3821 unsigned int args = 0;
3822 LOCK_TAKE(hdw->ctl_lock);
3823 hdw->cmd_buffer[0] = cmdcode & 0xffu;
3824 args = (cmdcode >> 8) & 0xffu;
3825 args = (args > 2) ? 2 : args;
3826 if (args) {
3827 cnt += args;
3828 hdw->cmd_buffer[1] = (cmdcode >> 16) & 0xffu;
3829 if (args > 1) {
3830 hdw->cmd_buffer[2] = (cmdcode >> 24) & 0xffu;
3831 }
3832 }
3833 if (pvrusb2_debug & PVR2_TRACE_INIT) {
3834 unsigned int idx;
3835 unsigned int ccnt,bcnt;
3836 char tbuf[50];
3837 cmdcode &= 0xffu;
3838 bcnt = 0;
3839 ccnt = scnprintf(tbuf+bcnt,
3840 sizeof(tbuf)-bcnt,
3841 "Sending FX2 command 0x%x",cmdcode);
3842 bcnt += ccnt;
3843 for (idx = 0; idx < ARRAY_SIZE(pvr2_fx2cmd_desc); idx++) {
3844 if (pvr2_fx2cmd_desc[idx].id == cmdcode) {
3845 ccnt = scnprintf(tbuf+bcnt,
3846 sizeof(tbuf)-bcnt,
3847 " \"%s\"",
3848 pvr2_fx2cmd_desc[idx].desc);
3849 bcnt += ccnt;
3850 break;
3851 }
3852 }
3853 if (args) {
3854 ccnt = scnprintf(tbuf+bcnt,
3855 sizeof(tbuf)-bcnt,
3856 " (%u",hdw->cmd_buffer[1]);
3857 bcnt += ccnt;
3858 if (args > 1) {
3859 ccnt = scnprintf(tbuf+bcnt,
3860 sizeof(tbuf)-bcnt,
3861 ",%u",hdw->cmd_buffer[2]);
3862 bcnt += ccnt;
3863 }
3864 ccnt = scnprintf(tbuf+bcnt,
3865 sizeof(tbuf)-bcnt,
3866 ")");
3867 bcnt += ccnt;
3868 }
3869 pvr2_trace(PVR2_TRACE_INIT,"%.*s",bcnt,tbuf);
3870 }
3871 ret = pvr2_send_request(hdw,hdw->cmd_buffer,cnt,NULL,0);
3872 LOCK_GIVE(hdw->ctl_lock);
3873 return ret;
3874 }
3875
3876
3877 int pvr2_write_register(struct pvr2_hdw *hdw, u16 reg, u32 data)
3878 {
3879 int ret;
3880
3881 LOCK_TAKE(hdw->ctl_lock);
3882
3883 hdw->cmd_buffer[0] = FX2CMD_REG_WRITE; /* write register prefix */
3884 PVR2_DECOMPOSE_LE(hdw->cmd_buffer,1,data);
3885 hdw->cmd_buffer[5] = 0;
3886 hdw->cmd_buffer[6] = (reg >> 8) & 0xff;
3887 hdw->cmd_buffer[7] = reg & 0xff;
3888
3889
3890 ret = pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 0);
3891
3892 LOCK_GIVE(hdw->ctl_lock);
3893
3894 return ret;
3895 }
3896
3897
3898 static int pvr2_read_register(struct pvr2_hdw *hdw, u16 reg, u32 *data)
3899 {
3900 int ret = 0;
3901
3902 LOCK_TAKE(hdw->ctl_lock);
3903
3904 hdw->cmd_buffer[0] = FX2CMD_REG_READ; /* read register prefix */
3905 hdw->cmd_buffer[1] = 0;
3906 hdw->cmd_buffer[2] = 0;
3907 hdw->cmd_buffer[3] = 0;
3908 hdw->cmd_buffer[4] = 0;
3909 hdw->cmd_buffer[5] = 0;
3910 hdw->cmd_buffer[6] = (reg >> 8) & 0xff;
3911 hdw->cmd_buffer[7] = reg & 0xff;
3912
3913 ret |= pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 4);
3914 *data = PVR2_COMPOSE_LE(hdw->cmd_buffer,0);
3915
3916 LOCK_GIVE(hdw->ctl_lock);
3917
3918 return ret;
3919 }
3920
3921
3922 void pvr2_hdw_render_useless(struct pvr2_hdw *hdw)
3923 {
3924 if (!hdw->flag_ok) return;
3925 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3926 "Device being rendered inoperable");
3927 if (hdw->vid_stream) {
3928 pvr2_stream_setup(hdw->vid_stream,NULL,0,0);
3929 }
3930 hdw->flag_ok = 0;
3931 trace_stbit("flag_ok",hdw->flag_ok);
3932 pvr2_hdw_state_sched(hdw);
3933 }
3934
3935
3936 void pvr2_hdw_device_reset(struct pvr2_hdw *hdw)
3937 {
3938 int ret;
3939 pvr2_trace(PVR2_TRACE_INIT,"Performing a device reset...");
3940 ret = usb_lock_device_for_reset(hdw->usb_dev,NULL);
3941 if (ret == 0) {
3942 ret = usb_reset_device(hdw->usb_dev);
3943 usb_unlock_device(hdw->usb_dev);
3944 } else {
3945 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3946 "Failed to lock USB device ret=%d",ret);
3947 }
3948 if (init_pause_msec) {
3949 pvr2_trace(PVR2_TRACE_INFO,
3950 "Waiting %u msec for hardware to settle",
3951 init_pause_msec);
3952 msleep(init_pause_msec);
3953 }
3954
3955 }
3956
3957
3958 void pvr2_hdw_cpureset_assert(struct pvr2_hdw *hdw,int val)
3959 {
3960 char *da;
3961 unsigned int pipe;
3962 int ret;
3963
3964 if (!hdw->usb_dev) return;
3965
3966 da = kmalloc(16, GFP_KERNEL);
3967
3968 if (da == NULL) {
3969 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3970 "Unable to allocate memory to control CPU reset");
3971 return;
3972 }
3973
3974 pvr2_trace(PVR2_TRACE_INIT,"cpureset_assert(%d)",val);
3975
3976 da[0] = val ? 0x01 : 0x00;
3977
3978 /* Write the CPUCS register on the 8051. The lsb of the register
3979 is the reset bit; a 1 asserts reset while a 0 clears it. */
3980 pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
3981 ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,HZ);
3982 if (ret < 0) {
3983 pvr2_trace(PVR2_TRACE_ERROR_LEGS,
3984 "cpureset_assert(%d) error=%d",val,ret);
3985 pvr2_hdw_render_useless(hdw);
3986 }
3987
3988 kfree(da);
3989 }
3990
3991
3992 int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *hdw)
3993 {
3994 return pvr2_issue_simple_cmd(hdw,FX2CMD_DEEP_RESET);
3995 }
3996
3997
3998 int pvr2_hdw_cmd_powerup(struct pvr2_hdw *hdw)
3999 {
4000 return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_ON);
4001 }
4002
4003
4004
4005 int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw)
4006 {
4007 pvr2_trace(PVR2_TRACE_INIT,
4008 "Requesting decoder reset");
4009 if (hdw->decoder_client_id) {
4010 v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
4011 core, reset, 0);
4012 pvr2_hdw_cx25840_vbi_hack(hdw);
4013 return 0;
4014 }
4015 pvr2_trace(PVR2_TRACE_INIT,
4016 "Unable to reset decoder: nothing attached");
4017 return -ENOTTY;
4018 }
4019
4020
4021 static int pvr2_hdw_cmd_hcw_demod_reset(struct pvr2_hdw *hdw, int onoff)
4022 {
4023 hdw->flag_ok = !0;
4024
4025 /* Use this for Hauppauge 160xxx only */
4026 if (le16_to_cpu(hdw->usb_dev->descriptor.idVendor) == 0x2040 &&
4027 (le16_to_cpu(hdw->usb_dev->descriptor.idProduct) == 0x7502 ||
4028 le16_to_cpu(hdw->usb_dev->descriptor.idProduct) == 0x7510)) {
4029 pr_debug("%s(): resetting demod on Hauppauge 160xxx platform skipped\n",
4030 __func__);
4031 /* Can't reset 160xxx or it will trash Demod tristate */
4032 return pvr2_issue_simple_cmd(hdw,
4033 FX2CMD_HCW_MAKO_SLEEP_PIN |
4034 (1 << 8) |
4035 ((onoff ? 1 : 0) << 16));
4036 }
4037
4038 return pvr2_issue_simple_cmd(hdw,
4039 FX2CMD_HCW_DEMOD_RESETIN |
4040 (1 << 8) |
4041 ((onoff ? 1 : 0) << 16));
4042 }
4043
4044
4045 static int pvr2_hdw_cmd_onair_fe_power_ctrl(struct pvr2_hdw *hdw, int onoff)
4046 {
4047 hdw->flag_ok = !0;
4048 return pvr2_issue_simple_cmd(hdw,(onoff ?
4049 FX2CMD_ONAIR_DTV_POWER_ON :
4050 FX2CMD_ONAIR_DTV_POWER_OFF));
4051 }
4052
4053
4054 static int pvr2_hdw_cmd_onair_digital_path_ctrl(struct pvr2_hdw *hdw,
4055 int onoff)
4056 {
4057 return pvr2_issue_simple_cmd(hdw,(onoff ?
4058 FX2CMD_ONAIR_DTV_STREAMING_ON :
4059 FX2CMD_ONAIR_DTV_STREAMING_OFF));
4060 }
4061
4062
4063 static void pvr2_hdw_cmd_modeswitch(struct pvr2_hdw *hdw,int digitalFl)
4064 {
4065 int cmode;
4066 /* Compare digital/analog desired setting with current setting. If
4067 they don't match, fix it... */
4068 cmode = (digitalFl ? PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG);
4069 if (cmode == hdw->pathway_state) {
4070 /* They match; nothing to do */
4071 return;
4072 }
4073
4074 switch (hdw->hdw_desc->digital_control_scheme) {
4075 case PVR2_DIGITAL_SCHEME_HAUPPAUGE:
4076 pvr2_hdw_cmd_hcw_demod_reset(hdw,digitalFl);
4077 if (cmode == PVR2_PATHWAY_ANALOG) {
4078 /* If moving to analog mode, also force the decoder
4079 to reset. If no decoder is attached, then it's
4080 ok to ignore this because if/when the decoder
4081 attaches, it will reset itself at that time. */
4082 pvr2_hdw_cmd_decoder_reset(hdw);
4083 }
4084 break;
4085 case PVR2_DIGITAL_SCHEME_ONAIR:
4086 /* Supposedly we should always have the power on whether in
4087 digital or analog mode. But for now do what appears to
4088 work... */
4089 pvr2_hdw_cmd_onair_fe_power_ctrl(hdw,digitalFl);
4090 break;
4091 default: break;
4092 }
4093
4094 pvr2_hdw_untrip_unlocked(hdw);
4095 hdw->pathway_state = cmode;
4096 }
4097
4098
4099 static void pvr2_led_ctrl_hauppauge(struct pvr2_hdw *hdw, int onoff)
4100 {
4101 /* change some GPIO data
4102 *
4103 * note: bit d7 of dir appears to control the LED,
4104 * so we shut it off here.
4105 *
4106 */
4107 if (onoff) {
4108 pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000481);
4109 } else {
4110 pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000401);
4111 }
4112 pvr2_hdw_gpio_chg_out(hdw, 0xffffffff, 0x00000000);
4113 }
4114
4115
4116 typedef void (*led_method_func)(struct pvr2_hdw *,int);
4117
4118 static led_method_func led_methods[] = {
4119 [PVR2_LED_SCHEME_HAUPPAUGE] = pvr2_led_ctrl_hauppauge,
4120 };
4121
4122
4123 /* Toggle LED */
4124 static void pvr2_led_ctrl(struct pvr2_hdw *hdw,int onoff)
4125 {
4126 unsigned int scheme_id;
4127 led_method_func fp;
4128
4129 if ((!onoff) == (!hdw->led_on)) return;
4130
4131 hdw->led_on = onoff != 0;
4132
4133 scheme_id = hdw->hdw_desc->led_scheme;
4134 if (scheme_id < ARRAY_SIZE(led_methods)) {
4135 fp = led_methods[scheme_id];
4136 } else {
4137 fp = NULL;
4138 }
4139
4140 if (fp) (*fp)(hdw,onoff);
4141 }
4142
4143
4144 /* Stop / start video stream transport */
4145 static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl)
4146 {
4147 int ret;
4148
4149 /* If we're in analog mode, then just issue the usual analog
4150 command. */
4151 if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) {
4152 return pvr2_issue_simple_cmd(hdw,
4153 (runFl ?
4154 FX2CMD_STREAMING_ON :
4155 FX2CMD_STREAMING_OFF));
4156 /*Note: Not reached */
4157 }
4158
4159 if (hdw->pathway_state != PVR2_PATHWAY_DIGITAL) {
4160 /* Whoops, we don't know what mode we're in... */
4161 return -EINVAL;
4162 }
4163
4164 /* To get here we have to be in digital mode. The mechanism here
4165 is unfortunately different for different vendors. So we switch
4166 on the device's digital scheme attribute in order to figure out
4167 what to do. */
4168 switch (hdw->hdw_desc->digital_control_scheme) {
4169 case PVR2_DIGITAL_SCHEME_HAUPPAUGE:
4170 return pvr2_issue_simple_cmd(hdw,
4171 (runFl ?
4172 FX2CMD_HCW_DTV_STREAMING_ON :
4173 FX2CMD_HCW_DTV_STREAMING_OFF));
4174 case PVR2_DIGITAL_SCHEME_ONAIR:
4175 ret = pvr2_issue_simple_cmd(hdw,
4176 (runFl ?
4177 FX2CMD_STREAMING_ON :
4178 FX2CMD_STREAMING_OFF));
4179 if (ret) return ret;
4180 return pvr2_hdw_cmd_onair_digital_path_ctrl(hdw,runFl);
4181 default:
4182 return -EINVAL;
4183 }
4184 }
4185
4186
4187 /* Evaluate whether or not state_pathway_ok can change */
4188 static int state_eval_pathway_ok(struct pvr2_hdw *hdw)
4189 {
4190 if (hdw->state_pathway_ok) {
4191 /* Nothing to do if pathway is already ok */
4192 return 0;
4193 }
4194 if (!hdw->state_pipeline_idle) {
4195 /* Not allowed to change anything if pipeline is not idle */
4196 return 0;
4197 }
4198 pvr2_hdw_cmd_modeswitch(hdw,hdw->input_val == PVR2_CVAL_INPUT_DTV);
4199 hdw->state_pathway_ok = !0;
4200 trace_stbit("state_pathway_ok",hdw->state_pathway_ok);
4201 return !0;
4202 }
4203
4204
4205 /* Evaluate whether or not state_encoder_ok can change */
4206 static int state_eval_encoder_ok(struct pvr2_hdw *hdw)
4207 {
4208 if (hdw->state_encoder_ok) return 0;
4209 if (hdw->flag_tripped) return 0;
4210 if (hdw->state_encoder_run) return 0;
4211 if (hdw->state_encoder_config) return 0;
4212 if (hdw->state_decoder_run) return 0;
4213 if (hdw->state_usbstream_run) return 0;
4214 if (hdw->pathway_state == PVR2_PATHWAY_DIGITAL) {
4215 if (!hdw->hdw_desc->flag_digital_requires_cx23416) return 0;
4216 } else if (hdw->pathway_state != PVR2_PATHWAY_ANALOG) {
4217 return 0;
4218 }
4219
4220 if (pvr2_upload_firmware2(hdw) < 0) {
4221 hdw->flag_tripped = !0;
4222 trace_stbit("flag_tripped",hdw->flag_tripped);
4223 return !0;
4224 }
4225 hdw->state_encoder_ok = !0;
4226 trace_stbit("state_encoder_ok",hdw->state_encoder_ok);
4227 return !0;
4228 }
4229
4230
4231 /* Evaluate whether or not state_encoder_config can change */
4232 static int state_eval_encoder_config(struct pvr2_hdw *hdw)
4233 {
4234 if (hdw->state_encoder_config) {
4235 if (hdw->state_encoder_ok) {
4236 if (hdw->state_pipeline_req &&
4237 !hdw->state_pipeline_pause) return 0;
4238 }
4239 hdw->state_encoder_config = 0;
4240 hdw->state_encoder_waitok = 0;
4241 trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok);
4242 /* paranoia - solve race if timer just completed */
4243 del_timer_sync(&hdw->encoder_wait_timer);
4244 } else {
4245 if (!hdw->state_pathway_ok ||
4246 (hdw->pathway_state != PVR2_PATHWAY_ANALOG) ||
4247 !hdw->state_encoder_ok ||
4248 !hdw->state_pipeline_idle ||
4249 hdw->state_pipeline_pause ||
4250 !hdw->state_pipeline_req ||
4251 !hdw->state_pipeline_config) {
4252 /* We must reset the enforced wait interval if
4253 anything has happened that might have disturbed
4254 the encoder. This should be a rare case. */
4255 if (timer_pending(&hdw->encoder_wait_timer)) {
4256 del_timer_sync(&hdw->encoder_wait_timer);
4257 }
4258 if (hdw->state_encoder_waitok) {
4259 /* Must clear the state - therefore we did
4260 something to a state bit and must also
4261 return true. */
4262 hdw->state_encoder_waitok = 0;
4263 trace_stbit("state_encoder_waitok",
4264 hdw->state_encoder_waitok);
4265 return !0;
4266 }
4267 return 0;
4268 }
4269 if (!hdw->state_encoder_waitok) {
4270 if (!timer_pending(&hdw->encoder_wait_timer)) {
4271 /* waitok flag wasn't set and timer isn't
4272 running. Check flag once more to avoid
4273 a race then start the timer. This is
4274 the point when we measure out a minimal
4275 quiet interval before doing something to
4276 the encoder. */
4277 if (!hdw->state_encoder_waitok) {
4278 hdw->encoder_wait_timer.expires =
4279 jiffies + msecs_to_jiffies(
4280 TIME_MSEC_ENCODER_WAIT);
4281 add_timer(&hdw->encoder_wait_timer);
4282 }
4283 }
4284 /* We can't continue until we know we have been
4285 quiet for the interval measured by this
4286 timer. */
4287 return 0;
4288 }
4289 pvr2_encoder_configure(hdw);
4290 if (hdw->state_encoder_ok) hdw->state_encoder_config = !0;
4291 }
4292 trace_stbit("state_encoder_config",hdw->state_encoder_config);
4293 return !0;
4294 }
4295
4296
4297 /* Return true if the encoder should not be running. */
4298 static int state_check_disable_encoder_run(struct pvr2_hdw *hdw)
4299 {
4300 if (!hdw->state_encoder_ok) {
4301 /* Encoder isn't healthy at the moment, so stop it. */
4302 return !0;
4303 }
4304 if (!hdw->state_pathway_ok) {
4305 /* Mode is not understood at the moment (i.e. it wants to
4306 change), so encoder must be stopped. */
4307 return !0;
4308 }
4309
4310 switch (hdw->pathway_state) {
4311 case PVR2_PATHWAY_ANALOG:
4312 if (!hdw->state_decoder_run) {
4313 /* We're in analog mode and the decoder is not
4314 running; thus the encoder should be stopped as
4315 well. */
4316 return !0;
4317 }
4318 break;
4319 case PVR2_PATHWAY_DIGITAL:
4320 if (hdw->state_encoder_runok) {
4321 /* This is a funny case. We're in digital mode so
4322 really the encoder should be stopped. However
4323 if it really is running, only kill it after
4324 runok has been set. This gives a chance for the
4325 onair quirk to function (encoder must run
4326 briefly first, at least once, before onair
4327 digital streaming can work). */
4328 return !0;
4329 }
4330 break;
4331 default:
4332 /* Unknown mode; so encoder should be stopped. */
4333 return !0;
4334 }
4335
4336 /* If we get here, we haven't found a reason to stop the
4337 encoder. */
4338 return 0;
4339 }
4340
4341
4342 /* Return true if the encoder should be running. */
4343 static int state_check_enable_encoder_run(struct pvr2_hdw *hdw)
4344 {
4345 if (!hdw->state_encoder_ok) {
4346 /* Don't run the encoder if it isn't healthy... */
4347 return 0;
4348 }
4349 if (!hdw->state_pathway_ok) {
4350 /* Don't run the encoder if we don't (yet) know what mode
4351 we need to be in... */
4352 return 0;
4353 }
4354
4355 switch (hdw->pathway_state) {
4356 case PVR2_PATHWAY_ANALOG:
4357 if (hdw->state_decoder_run && hdw->state_decoder_ready) {
4358 /* In analog mode, if the decoder is running, then
4359 run the encoder. */
4360 return !0;
4361 }
4362 break;
4363 case PVR2_PATHWAY_DIGITAL:
4364 if ((hdw->hdw_desc->digital_control_scheme ==
4365 PVR2_DIGITAL_SCHEME_ONAIR) &&
4366 !hdw->state_encoder_runok) {
4367 /* This is a quirk. OnAir hardware won't stream
4368 digital until the encoder has been run at least
4369 once, for a minimal period of time (empiricially
4370 measured to be 1/4 second). So if we're on
4371 OnAir hardware and the encoder has never been
4372 run at all, then start the encoder. Normal
4373 state machine logic in the driver will
4374 automatically handle the remaining bits. */
4375 return !0;
4376 }
4377 break;
4378 default:
4379 /* For completeness (unknown mode; encoder won't run ever) */
4380 break;
4381 }
4382 /* If we get here, then we haven't found any reason to run the
4383 encoder, so don't run it. */
4384 return 0;
4385 }
4386
4387
4388 /* Evaluate whether or not state_encoder_run can change */
4389 static int state_eval_encoder_run(struct pvr2_hdw *hdw)
4390 {
4391 if (hdw->state_encoder_run) {
4392 if (!state_check_disable_encoder_run(hdw)) return 0;
4393 if (hdw->state_encoder_ok) {
4394 del_timer_sync(&hdw->encoder_run_timer);
4395 if (pvr2_encoder_stop(hdw) < 0) return !0;
4396 }
4397 hdw->state_encoder_run = 0;
4398 } else {
4399 if (!state_check_enable_encoder_run(hdw)) return 0;
4400 if (pvr2_encoder_start(hdw) < 0) return !0;
4401 hdw->state_encoder_run = !0;
4402 if (!hdw->state_encoder_runok) {
4403 hdw->encoder_run_timer.expires = jiffies +
4404 msecs_to_jiffies(TIME_MSEC_ENCODER_OK);
4405 add_timer(&hdw->encoder_run_timer);
4406 }
4407 }
4408 trace_stbit("state_encoder_run",hdw->state_encoder_run);
4409 return !0;
4410 }
4411
4412
4413 /* Timeout function for quiescent timer. */
4414 static void pvr2_hdw_quiescent_timeout(struct timer_list *t)
4415 {
4416 struct pvr2_hdw *hdw = from_timer(hdw, t, quiescent_timer);
4417 hdw->state_decoder_quiescent = !0;
4418 trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent);
4419 hdw->state_stale = !0;
4420 schedule_work(&hdw->workpoll);
4421 }
4422
4423
4424 /* Timeout function for decoder stabilization timer. */
4425 static void pvr2_hdw_decoder_stabilization_timeout(struct timer_list *t)
4426 {
4427 struct pvr2_hdw *hdw = from_timer(hdw, t, decoder_stabilization_timer);
4428 hdw->state_decoder_ready = !0;
4429 trace_stbit("state_decoder_ready", hdw->state_decoder_ready);
4430 hdw->state_stale = !0;
4431 schedule_work(&hdw->workpoll);
4432 }
4433
4434
4435 /* Timeout function for encoder wait timer. */
4436 static void pvr2_hdw_encoder_wait_timeout(struct timer_list *t)
4437 {
4438 struct pvr2_hdw *hdw = from_timer(hdw, t, encoder_wait_timer);
4439 hdw->state_encoder_waitok = !0;
4440 trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok);
4441 hdw->state_stale = !0;
4442 schedule_work(&hdw->workpoll);
4443 }
4444
4445
4446 /* Timeout function for encoder run timer. */
4447 static void pvr2_hdw_encoder_run_timeout(struct timer_list *t)
4448 {
4449 struct pvr2_hdw *hdw = from_timer(hdw, t, encoder_run_timer);
4450 if (!hdw->state_encoder_runok) {
4451 hdw->state_encoder_runok = !0;
4452 trace_stbit("state_encoder_runok",hdw->state_encoder_runok);
4453 hdw->state_stale = !0;
4454 schedule_work(&hdw->workpoll);
4455 }
4456 }
4457
4458
4459 /* Evaluate whether or not state_decoder_run can change */
4460 static int state_eval_decoder_run(struct pvr2_hdw *hdw)
4461 {
4462 if (hdw->state_decoder_run) {
4463 if (hdw->state_encoder_ok) {
4464 if (hdw->state_pipeline_req &&
4465 !hdw->state_pipeline_pause &&
4466 hdw->state_pathway_ok) return 0;
4467 }
4468 if (!hdw->flag_decoder_missed) {
4469 pvr2_decoder_enable(hdw,0);
4470 }
4471 hdw->state_decoder_quiescent = 0;
4472 hdw->state_decoder_run = 0;
4473 /* paranoia - solve race if timer(s) just completed */
4474 del_timer_sync(&hdw->quiescent_timer);
4475 /* Kill the stabilization timer, in case we're killing the
4476 encoder before the previous stabilization interval has
4477 been properly timed. */
4478 del_timer_sync(&hdw->decoder_stabilization_timer);
4479 hdw->state_decoder_ready = 0;
4480 } else {
4481 if (!hdw->state_decoder_quiescent) {
4482 if (!timer_pending(&hdw->quiescent_timer)) {
4483 /* We don't do something about the
4484 quiescent timer until right here because
4485 we also want to catch cases where the
4486 decoder was already not running (like
4487 after initialization) as opposed to
4488 knowing that we had just stopped it.
4489 The second flag check is here to cover a
4490 race - the timer could have run and set
4491 this flag just after the previous check
4492 but before we did the pending check. */
4493 if (!hdw->state_decoder_quiescent) {
4494 hdw->quiescent_timer.expires =
4495 jiffies + msecs_to_jiffies(
4496 TIME_MSEC_DECODER_WAIT);
4497 add_timer(&hdw->quiescent_timer);
4498 }
4499 }
4500 /* Don't allow decoder to start again until it has
4501 been quiesced first. This little detail should
4502 hopefully further stabilize the encoder. */
4503 return 0;
4504 }
4505 if (!hdw->state_pathway_ok ||
4506 (hdw->pathway_state != PVR2_PATHWAY_ANALOG) ||
4507 !hdw->state_pipeline_req ||
4508 hdw->state_pipeline_pause ||
4509 !hdw->state_pipeline_config ||
4510 !hdw->state_encoder_config ||
4511 !hdw->state_encoder_ok) return 0;
4512 del_timer_sync(&hdw->quiescent_timer);
4513 if (hdw->flag_decoder_missed) return 0;
4514 if (pvr2_decoder_enable(hdw,!0) < 0) return 0;
4515 hdw->state_decoder_quiescent = 0;
4516 hdw->state_decoder_ready = 0;
4517 hdw->state_decoder_run = !0;
4518 if (hdw->decoder_client_id == PVR2_CLIENT_ID_SAA7115) {
4519 hdw->decoder_stabilization_timer.expires =
4520 jiffies + msecs_to_jiffies(
4521 TIME_MSEC_DECODER_STABILIZATION_WAIT);
4522 add_timer(&hdw->decoder_stabilization_timer);
4523 } else {
4524 hdw->state_decoder_ready = !0;
4525 }
4526 }
4527 trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent);
4528 trace_stbit("state_decoder_run",hdw->state_decoder_run);
4529 trace_stbit("state_decoder_ready", hdw->state_decoder_ready);
4530 return !0;
4531 }
4532
4533
4534 /* Evaluate whether or not state_usbstream_run can change */
4535 static int state_eval_usbstream_run(struct pvr2_hdw *hdw)
4536 {
4537 if (hdw->state_usbstream_run) {
4538 int fl = !0;
4539 if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) {
4540 fl = (hdw->state_encoder_ok &&
4541 hdw->state_encoder_run);
4542 } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) &&
4543 (hdw->hdw_desc->flag_digital_requires_cx23416)) {
4544 fl = hdw->state_encoder_ok;
4545 }
4546 if (fl &&
4547 hdw->state_pipeline_req &&
4548 !hdw->state_pipeline_pause &&
4549 hdw->state_pathway_ok) {
4550 return 0;
4551 }
4552 pvr2_hdw_cmd_usbstream(hdw,0);
4553 hdw->state_usbstream_run = 0;
4554 } else {
4555 if (!hdw->state_pipeline_req ||
4556 hdw->state_pipeline_pause ||
4557 !hdw->state_pathway_ok) return 0;
4558 if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) {
4559 if (!hdw->state_encoder_ok ||
4560 !hdw->state_encoder_run) return 0;
4561 } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) &&
4562 (hdw->hdw_desc->flag_digital_requires_cx23416)) {
4563 if (!hdw->state_encoder_ok) return 0;
4564 if (hdw->state_encoder_run) return 0;
4565 if (hdw->hdw_desc->digital_control_scheme ==
4566 PVR2_DIGITAL_SCHEME_ONAIR) {
4567 /* OnAir digital receivers won't stream
4568 unless the analog encoder has run first.
4569 Why? I have no idea. But don't even
4570 try until we know the analog side is
4571 known to have run. */
4572 if (!hdw->state_encoder_runok) return 0;
4573 }
4574 }
4575 if (pvr2_hdw_cmd_usbstream(hdw,!0) < 0) return 0;
4576 hdw->state_usbstream_run = !0;
4577 }
4578 trace_stbit("state_usbstream_run",hdw->state_usbstream_run);
4579 return !0;
4580 }
4581
4582
4583 /* Attempt to configure pipeline, if needed */
4584 static int state_eval_pipeline_config(struct pvr2_hdw *hdw)
4585 {
4586 if (hdw->state_pipeline_config ||
4587 hdw->state_pipeline_pause) return 0;
4588 pvr2_hdw_commit_execute(hdw);
4589 return !0;
4590 }
4591
4592
4593 /* Update pipeline idle and pipeline pause tracking states based on other
4594 inputs. This must be called whenever the other relevant inputs have
4595 changed. */
4596 static int state_update_pipeline_state(struct pvr2_hdw *hdw)
4597 {
4598 unsigned int st;
4599 int updatedFl = 0;
4600 /* Update pipeline state */
4601 st = !(hdw->state_encoder_run ||
4602 hdw->state_decoder_run ||
4603 hdw->state_usbstream_run ||
4604 (!hdw->state_decoder_quiescent));
4605 if (!st != !hdw->state_pipeline_idle) {
4606 hdw->state_pipeline_idle = st;
4607 updatedFl = !0;
4608 }
4609 if (hdw->state_pipeline_idle && hdw->state_pipeline_pause) {
4610 hdw->state_pipeline_pause = 0;
4611 updatedFl = !0;
4612 }
4613 return updatedFl;
4614 }
4615
4616
4617 typedef int (*state_eval_func)(struct pvr2_hdw *);
4618
4619 /* Set of functions to be run to evaluate various states in the driver. */
4620 static const state_eval_func eval_funcs[] = {
4621 state_eval_pathway_ok,
4622 state_eval_pipeline_config,
4623 state_eval_encoder_ok,
4624 state_eval_encoder_config,
4625 state_eval_decoder_run,
4626 state_eval_encoder_run,
4627 state_eval_usbstream_run,
4628 };
4629
4630
4631 /* Process various states and return true if we did anything interesting. */
4632 static int pvr2_hdw_state_update(struct pvr2_hdw *hdw)
4633 {
4634 unsigned int i;
4635 int state_updated = 0;
4636 int check_flag;
4637
4638 if (!hdw->state_stale) return 0;
4639 if ((hdw->fw1_state != FW1_STATE_OK) ||
4640 !hdw->flag_ok) {
4641 hdw->state_stale = 0;
4642 return !0;
4643 }
4644 /* This loop is the heart of the entire driver. It keeps trying to
4645 evaluate various bits of driver state until nothing changes for
4646 one full iteration. Each "bit of state" tracks some global
4647 aspect of the driver, e.g. whether decoder should run, if
4648 pipeline is configured, usb streaming is on, etc. We separately
4649 evaluate each of those questions based on other driver state to
4650 arrive at the correct running configuration. */
4651 do {
4652 check_flag = 0;
4653 state_update_pipeline_state(hdw);
4654 /* Iterate over each bit of state */
4655 for (i = 0; (i<ARRAY_SIZE(eval_funcs)) && hdw->flag_ok; i++) {
4656 if ((*eval_funcs[i])(hdw)) {
4657 check_flag = !0;
4658 state_updated = !0;
4659 state_update_pipeline_state(hdw);
4660 }
4661 }
4662 } while (check_flag && hdw->flag_ok);
4663 hdw->state_stale = 0;
4664 trace_stbit("state_stale",hdw->state_stale);
4665 return state_updated;
4666 }
4667
4668
4669 static unsigned int print_input_mask(unsigned int msk,
4670 char *buf,unsigned int acnt)
4671 {
4672 unsigned int idx,ccnt;
4673 unsigned int tcnt = 0;
4674 for (idx = 0; idx < ARRAY_SIZE(control_values_input); idx++) {
4675 if (!((1UL << idx) & msk)) continue;
4676 ccnt = scnprintf(buf+tcnt,
4677 acnt-tcnt,
4678 "%s%s",
4679 (tcnt ? ", " : ""),
4680 control_values_input[idx]);
4681 tcnt += ccnt;
4682 }
4683 return tcnt;
4684 }
4685
4686
4687 static const char *pvr2_pathway_state_name(int id)
4688 {
4689 switch (id) {
4690 case PVR2_PATHWAY_ANALOG: return "analog";
4691 case PVR2_PATHWAY_DIGITAL: return "digital";
4692 default: return "unknown";
4693 }
4694 }
4695
4696
4697 static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which,
4698 char *buf,unsigned int acnt)
4699 {
4700 switch (which) {
4701 case 0:
4702 return scnprintf(
4703 buf,acnt,
4704 "driver:%s%s%s%s%s <mode=%s>",
4705 (hdw->flag_ok ? " <ok>" : " <fail>"),
4706 (hdw->flag_init_ok ? " <init>" : " <uninitialized>"),
4707 (hdw->flag_disconnected ? " <disconnected>" :
4708 " <connected>"),
4709 (hdw->flag_tripped ? " <tripped>" : ""),
4710 (hdw->flag_decoder_missed ? " <no decoder>" : ""),
4711 pvr2_pathway_state_name(hdw->pathway_state));
4712
4713 case 1:
4714 return scnprintf(
4715 buf,acnt,
4716 "pipeline:%s%s%s%s",
4717 (hdw->state_pipeline_idle ? " <idle>" : ""),
4718 (hdw->state_pipeline_config ?
4719 " <configok>" : " <stale>"),
4720 (hdw->state_pipeline_req ? " <req>" : ""),
4721 (hdw->state_pipeline_pause ? " <pause>" : ""));
4722 case 2:
4723 return scnprintf(
4724 buf,acnt,
4725 "worker:%s%s%s%s%s%s%s",
4726 (hdw->state_decoder_run ?
4727 (hdw->state_decoder_ready ?
4728 "<decode:run>" : " <decode:start>") :
4729 (hdw->state_decoder_quiescent ?
4730 "" : " <decode:stop>")),
4731 (hdw->state_decoder_quiescent ?
4732 " <decode:quiescent>" : ""),
4733 (hdw->state_encoder_ok ?
4734 "" : " <encode:init>"),
4735 (hdw->state_encoder_run ?
4736 (hdw->state_encoder_runok ?
4737 " <encode:run>" :
4738 " <encode:firstrun>") :
4739 (hdw->state_encoder_runok ?
4740 " <encode:stop>" :
4741 " <encode:virgin>")),
4742 (hdw->state_encoder_config ?
4743 " <encode:configok>" :
4744 (hdw->state_encoder_waitok ?
4745 "" : " <encode:waitok>")),
4746 (hdw->state_usbstream_run ?
4747 " <usb:run>" : " <usb:stop>"),
4748 (hdw->state_pathway_ok ?
4749 " <pathway:ok>" : ""));
4750 case 3:
4751 return scnprintf(
4752 buf,acnt,
4753 "state: %s",
4754 pvr2_get_state_name(hdw->master_state));
4755 case 4: {
4756 unsigned int tcnt = 0;
4757 unsigned int ccnt;
4758
4759 ccnt = scnprintf(buf,
4760 acnt,
4761 "Hardware supported inputs: ");
4762 tcnt += ccnt;
4763 tcnt += print_input_mask(hdw->input_avail_mask,
4764 buf+tcnt,
4765 acnt-tcnt);
4766 if (hdw->input_avail_mask != hdw->input_allowed_mask) {
4767 ccnt = scnprintf(buf+tcnt,
4768 acnt-tcnt,
4769 "; allowed inputs: ");
4770 tcnt += ccnt;
4771 tcnt += print_input_mask(hdw->input_allowed_mask,
4772 buf+tcnt,
4773 acnt-tcnt);
4774 }
4775 return tcnt;
4776 }
4777 case 5: {
4778 struct pvr2_stream_stats stats;
4779 if (!hdw->vid_stream) break;
4780 pvr2_stream_get_stats(hdw->vid_stream,
4781 &stats,
4782 0);
4783 return scnprintf(
4784 buf,acnt,
4785 "Bytes streamed=%u URBs: queued=%u idle=%u ready=%u processed=%u failed=%u",
4786 stats.bytes_processed,
4787 stats.buffers_in_queue,
4788 stats.buffers_in_idle,
4789 stats.buffers_in_ready,
4790 stats.buffers_processed,
4791 stats.buffers_failed);
4792 }
4793 case 6: {
4794 unsigned int id = hdw->ir_scheme_active;
4795 return scnprintf(buf, acnt, "ir scheme: id=%d %s", id,
4796 (id >= ARRAY_SIZE(ir_scheme_names) ?
4797 "?" : ir_scheme_names[id]));
4798 }
4799 default: break;
4800 }
4801 return 0;
4802 }
4803
4804
4805 /* Generate report containing info about attached sub-devices and attached
4806 i2c clients, including an indication of which attached i2c clients are
4807 actually sub-devices. */
4808 static unsigned int pvr2_hdw_report_clients(struct pvr2_hdw *hdw,
4809 char *buf, unsigned int acnt)
4810 {
4811 struct v4l2_subdev *sd;
4812 unsigned int tcnt = 0;
4813 unsigned int ccnt;
4814 struct i2c_client *client;
4815 const char *p;
4816 unsigned int id;
4817
4818 ccnt = scnprintf(buf, acnt, "Associated v4l2-subdev drivers and I2C clients:\n");
4819 tcnt += ccnt;
4820 v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) {
4821 id = sd->grp_id;
4822 p = NULL;
4823 if (id < ARRAY_SIZE(module_names)) p = module_names[id];
4824 if (p) {
4825 ccnt = scnprintf(buf + tcnt, acnt - tcnt, " %s:", p);
4826 tcnt += ccnt;
4827 } else {
4828 ccnt = scnprintf(buf + tcnt, acnt - tcnt,
4829 " (unknown id=%u):", id);
4830 tcnt += ccnt;
4831 }
4832 client = v4l2_get_subdevdata(sd);
4833 if (client) {
4834 ccnt = scnprintf(buf + tcnt, acnt - tcnt,
4835 " %s @ %02x\n", client->name,
4836 client->addr);
4837 tcnt += ccnt;
4838 } else {
4839 ccnt = scnprintf(buf + tcnt, acnt - tcnt,
4840 " no i2c client\n");
4841 tcnt += ccnt;
4842 }
4843 }
4844 return tcnt;
4845 }
4846
4847
4848 unsigned int pvr2_hdw_state_report(struct pvr2_hdw *hdw,
4849 char *buf,unsigned int acnt)
4850 {
4851 unsigned int bcnt,ccnt,idx;
4852 bcnt = 0;
4853 LOCK_TAKE(hdw->big_lock);
4854 for (idx = 0; ; idx++) {
4855 ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,acnt);
4856 if (!ccnt) break;
4857 bcnt += ccnt; acnt -= ccnt; buf += ccnt;
4858 if (!acnt) break;
4859 buf[0] = '\n'; ccnt = 1;
4860 bcnt += ccnt; acnt -= ccnt; buf += ccnt;
4861 }
4862 ccnt = pvr2_hdw_report_clients(hdw, buf, acnt);
4863 bcnt += ccnt; acnt -= ccnt; buf += ccnt;
4864 LOCK_GIVE(hdw->big_lock);
4865 return bcnt;
4866 }
4867
4868
4869 static void pvr2_hdw_state_log_state(struct pvr2_hdw *hdw)
4870 {
4871 char buf[256];
4872 unsigned int idx, ccnt;
4873 unsigned int lcnt, ucnt;
4874
4875 for (idx = 0; ; idx++) {
4876 ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,sizeof(buf));
4877 if (!ccnt) break;
4878 pr_info("%s %.*s\n", hdw->name, ccnt, buf);
4879 }
4880 ccnt = pvr2_hdw_report_clients(hdw, buf, sizeof(buf));
4881 if (ccnt >= sizeof(buf))
4882 ccnt = sizeof(buf);
4883
4884 ucnt = 0;
4885 while (ucnt < ccnt) {
4886 lcnt = 0;
4887 while ((lcnt + ucnt < ccnt) && (buf[lcnt + ucnt] != '\n')) {
4888 lcnt++;
4889 }
4890 pr_info("%s %.*s\n", hdw->name, lcnt, buf + ucnt);
4891 ucnt += lcnt + 1;
4892 }
4893 }
4894
4895
4896 /* Evaluate and update the driver's current state, taking various actions
4897 as appropriate for the update. */
4898 static int pvr2_hdw_state_eval(struct pvr2_hdw *hdw)
4899 {
4900 unsigned int st;
4901 int state_updated = 0;
4902 int callback_flag = 0;
4903 int analog_mode;
4904
4905 pvr2_trace(PVR2_TRACE_STBITS,
4906 "Drive state check START");
4907 if (pvrusb2_debug & PVR2_TRACE_STBITS) {
4908 pvr2_hdw_state_log_state(hdw);
4909 }
4910
4911 /* Process all state and get back over disposition */
4912 state_updated = pvr2_hdw_state_update(hdw);
4913
4914 analog_mode = (hdw->pathway_state != PVR2_PATHWAY_DIGITAL);
4915
4916 /* Update master state based upon all other states. */
4917 if (!hdw->flag_ok) {
4918 st = PVR2_STATE_DEAD;
4919 } else if (hdw->fw1_state != FW1_STATE_OK) {
4920 st = PVR2_STATE_COLD;
4921 } else if ((analog_mode ||
4922 hdw->hdw_desc->flag_digital_requires_cx23416) &&
4923 !hdw->state_encoder_ok) {
4924 st = PVR2_STATE_WARM;
4925 } else if (hdw->flag_tripped ||
4926 (analog_mode && hdw->flag_decoder_missed)) {
4927 st = PVR2_STATE_ERROR;
4928 } else if (hdw->state_usbstream_run &&
4929 (!analog_mode ||
4930 (hdw->state_encoder_run && hdw->state_decoder_run))) {
4931 st = PVR2_STATE_RUN;
4932 } else {
4933 st = PVR2_STATE_READY;
4934 }
4935 if (hdw->master_state != st) {
4936 pvr2_trace(PVR2_TRACE_STATE,
4937 "Device state change from %s to %s",
4938 pvr2_get_state_name(hdw->master_state),
4939 pvr2_get_state_name(st));
4940 pvr2_led_ctrl(hdw,st == PVR2_STATE_RUN);
4941 hdw->master_state = st;
4942 state_updated = !0;
4943 callback_flag = !0;
4944 }
4945 if (state_updated) {
4946 /* Trigger anyone waiting on any state changes here. */
4947 wake_up(&hdw->state_wait_data);
4948 }
4949
4950 if (pvrusb2_debug & PVR2_TRACE_STBITS) {
4951 pvr2_hdw_state_log_state(hdw);
4952 }
4953 pvr2_trace(PVR2_TRACE_STBITS,
4954 "Drive state check DONE callback=%d",callback_flag);
4955
4956 return callback_flag;
4957 }
4958
4959
4960 /* Cause kernel thread to check / update driver state */
4961 static void pvr2_hdw_state_sched(struct pvr2_hdw *hdw)
4962 {
4963 if (hdw->state_stale) return;
4964 hdw->state_stale = !0;
4965 trace_stbit("state_stale",hdw->state_stale);
4966 schedule_work(&hdw->workpoll);
4967 }
4968
4969
4970 int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *dp)
4971 {
4972 return pvr2_read_register(hdw,PVR2_GPIO_DIR,dp);
4973 }
4974
4975
4976 int pvr2_hdw_gpio_get_out(struct pvr2_hdw *hdw,u32 *dp)
4977 {
4978 return pvr2_read_register(hdw,PVR2_GPIO_OUT,dp);
4979 }
4980
4981
4982 int pvr2_hdw_gpio_get_in(struct pvr2_hdw *hdw,u32 *dp)
4983 {
4984 return pvr2_read_register(hdw,PVR2_GPIO_IN,dp);
4985 }
4986
4987
4988 int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val)
4989 {
4990 u32 cval,nval;
4991 int ret;
4992 if (~msk) {
4993 ret = pvr2_read_register(hdw,PVR2_GPIO_DIR,&cval);
4994 if (ret) return ret;
4995 nval = (cval & ~msk) | (val & msk);
4996 pvr2_trace(PVR2_TRACE_GPIO,
4997 "GPIO direction changing 0x%x:0x%x from 0x%x to 0x%x",
4998 msk,val,cval,nval);
4999 } else {
5000 nval = val;
5001 pvr2_trace(PVR2_TRACE_GPIO,
5002 "GPIO direction changing to 0x%x",nval);
5003 }
5004 return pvr2_write_register(hdw,PVR2_GPIO_DIR,nval);
5005 }
5006
5007
5008 int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val)
5009 {
5010 u32 cval,nval;
5011 int ret;
5012 if (~msk) {
5013 ret = pvr2_read_register(hdw,PVR2_GPIO_OUT,&cval);
5014 if (ret) return ret;
5015 nval = (cval & ~msk) | (val & msk);
5016 pvr2_trace(PVR2_TRACE_GPIO,
5017 "GPIO output changing 0x%x:0x%x from 0x%x to 0x%x",
5018 msk,val,cval,nval);
5019 } else {
5020 nval = val;
5021 pvr2_trace(PVR2_TRACE_GPIO,
5022 "GPIO output changing to 0x%x",nval);
5023 }
5024 return pvr2_write_register(hdw,PVR2_GPIO_OUT,nval);
5025 }
5026
5027
5028 void pvr2_hdw_status_poll(struct pvr2_hdw *hdw)
5029 {
5030 struct v4l2_tuner *vtp = &hdw->tuner_signal_info;
5031 memset(vtp, 0, sizeof(*vtp));
5032 vtp->type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
5033 V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
5034 hdw->tuner_signal_stale = 0;
5035 /* Note: There apparently is no replacement for VIDIOC_CROPCAP
5036 using v4l2-subdev - therefore we can't support that AT ALL right
5037 now. (Of course, no sub-drivers seem to implement it either.
5038 But now it's a a chicken and egg problem...) */
5039 v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, g_tuner, vtp);
5040 pvr2_trace(PVR2_TRACE_CHIPS, "subdev status poll type=%u strength=%u audio=0x%x cap=0x%x low=%u hi=%u",
5041 vtp->type,
5042 vtp->signal, vtp->rxsubchans, vtp->capability,
5043 vtp->rangelow, vtp->rangehigh);
5044
5045 /* We have to do this to avoid getting into constant polling if
5046 there's nobody to answer a poll of cropcap info. */
5047 hdw->cropcap_stale = 0;
5048 }
5049
5050
5051 unsigned int pvr2_hdw_get_input_available(struct pvr2_hdw *hdw)
5052 {
5053 return hdw->input_avail_mask;
5054 }
5055
5056
5057 unsigned int pvr2_hdw_get_input_allowed(struct pvr2_hdw *hdw)
5058 {
5059 return hdw->input_allowed_mask;
5060 }
5061
5062
5063 static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v)
5064 {
5065 if (hdw->input_val != v) {
5066 hdw->input_val = v;
5067 hdw->input_dirty = !0;
5068 }
5069
5070 /* Handle side effects - if we switch to a mode that needs the RF
5071 tuner, then select the right frequency choice as well and mark
5072 it dirty. */
5073 if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
5074 hdw->freqSelector = 0;
5075 hdw->freqDirty = !0;
5076 } else if ((hdw->input_val == PVR2_CVAL_INPUT_TV) ||
5077 (hdw->input_val == PVR2_CVAL_INPUT_DTV)) {
5078 hdw->freqSelector = 1;
5079 hdw->freqDirty = !0;
5080 }
5081 return 0;
5082 }
5083
5084
5085 int pvr2_hdw_set_input_allowed(struct pvr2_hdw *hdw,
5086 unsigned int change_mask,
5087 unsigned int change_val)
5088 {
5089 int ret = 0;
5090 unsigned int nv,m,idx;
5091 LOCK_TAKE(hdw->big_lock);
5092 do {
5093 nv = hdw->input_allowed_mask & ~change_mask;
5094 nv |= (change_val & change_mask);
5095 nv &= hdw->input_avail_mask;
5096 if (!nv) {
5097 /* No legal modes left; return error instead. */
5098 ret = -EPERM;
5099 break;
5100 }
5101 hdw->input_allowed_mask = nv;
5102 if ((1UL << hdw->input_val) & hdw->input_allowed_mask) {
5103 /* Current mode is still in the allowed mask, so
5104 we're done. */
5105 break;
5106 }
5107 /* Select and switch to a mode that is still in the allowed
5108 mask */
5109 if (!hdw->input_allowed_mask) {
5110 /* Nothing legal; give up */
5111 break;
5112 }
5113 m = hdw->input_allowed_mask;
5114 for (idx = 0; idx < (sizeof(m) << 3); idx++) {
5115 if (!((1UL << idx) & m)) continue;
5116 pvr2_hdw_set_input(hdw,idx);
5117 break;
5118 }
5119 } while (0);
5120 LOCK_GIVE(hdw->big_lock);
5121 return ret;
5122 }
5123
5124
5125 /* Find I2C address of eeprom */
5126 static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw)
5127 {
5128 int result;
5129 LOCK_TAKE(hdw->ctl_lock); do {
5130 hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR;
5131 result = pvr2_send_request(hdw,
5132 hdw->cmd_buffer,1,
5133 hdw->cmd_buffer,1);
5134 if (result < 0) break;
5135 result = hdw->cmd_buffer[0];
5136 } while(0); LOCK_GIVE(hdw->ctl_lock);
5137 return result;
5138 }
Linux with added FPC-III support