treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / mfd / aat2870-core.c
blob78ee4b28fca2402733197fc9dac67dc16d69b774
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * linux/drivers/mfd/aat2870-core.c
5 * Copyright (c) 2011, NVIDIA Corporation.
6 * Author: Jin Park <jinyoungp@nvidia.com>
7 */
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/debugfs.h>
12 #include <linux/slab.h>
13 #include <linux/uaccess.h>
14 #include <linux/i2c.h>
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/mfd/core.h>
18 #include <linux/mfd/aat2870.h>
19 #include <linux/regulator/machine.h>
21 static struct aat2870_register aat2870_regs[AAT2870_REG_NUM] = {
22 /* readable, writeable, value */
23 { 0, 1, 0x00 }, /* 0x00 AAT2870_BL_CH_EN */
24 { 0, 1, 0x16 }, /* 0x01 AAT2870_BLM */
25 { 0, 1, 0x16 }, /* 0x02 AAT2870_BLS */
26 { 0, 1, 0x56 }, /* 0x03 AAT2870_BL1 */
27 { 0, 1, 0x56 }, /* 0x04 AAT2870_BL2 */
28 { 0, 1, 0x56 }, /* 0x05 AAT2870_BL3 */
29 { 0, 1, 0x56 }, /* 0x06 AAT2870_BL4 */
30 { 0, 1, 0x56 }, /* 0x07 AAT2870_BL5 */
31 { 0, 1, 0x56 }, /* 0x08 AAT2870_BL6 */
32 { 0, 1, 0x56 }, /* 0x09 AAT2870_BL7 */
33 { 0, 1, 0x56 }, /* 0x0A AAT2870_BL8 */
34 { 0, 1, 0x00 }, /* 0x0B AAT2870_FLR */
35 { 0, 1, 0x03 }, /* 0x0C AAT2870_FM */
36 { 0, 1, 0x03 }, /* 0x0D AAT2870_FS */
37 { 0, 1, 0x10 }, /* 0x0E AAT2870_ALS_CFG0 */
38 { 0, 1, 0x06 }, /* 0x0F AAT2870_ALS_CFG1 */
39 { 0, 1, 0x00 }, /* 0x10 AAT2870_ALS_CFG2 */
40 { 1, 0, 0x00 }, /* 0x11 AAT2870_AMB */
41 { 0, 1, 0x00 }, /* 0x12 AAT2870_ALS0 */
42 { 0, 1, 0x00 }, /* 0x13 AAT2870_ALS1 */
43 { 0, 1, 0x00 }, /* 0x14 AAT2870_ALS2 */
44 { 0, 1, 0x00 }, /* 0x15 AAT2870_ALS3 */
45 { 0, 1, 0x00 }, /* 0x16 AAT2870_ALS4 */
46 { 0, 1, 0x00 }, /* 0x17 AAT2870_ALS5 */
47 { 0, 1, 0x00 }, /* 0x18 AAT2870_ALS6 */
48 { 0, 1, 0x00 }, /* 0x19 AAT2870_ALS7 */
49 { 0, 1, 0x00 }, /* 0x1A AAT2870_ALS8 */
50 { 0, 1, 0x00 }, /* 0x1B AAT2870_ALS9 */
51 { 0, 1, 0x00 }, /* 0x1C AAT2870_ALSA */
52 { 0, 1, 0x00 }, /* 0x1D AAT2870_ALSB */
53 { 0, 1, 0x00 }, /* 0x1E AAT2870_ALSC */
54 { 0, 1, 0x00 }, /* 0x1F AAT2870_ALSD */
55 { 0, 1, 0x00 }, /* 0x20 AAT2870_ALSE */
56 { 0, 1, 0x00 }, /* 0x21 AAT2870_ALSF */
57 { 0, 1, 0x00 }, /* 0x22 AAT2870_SUB_SET */
58 { 0, 1, 0x00 }, /* 0x23 AAT2870_SUB_CTRL */
59 { 0, 1, 0x00 }, /* 0x24 AAT2870_LDO_AB */
60 { 0, 1, 0x00 }, /* 0x25 AAT2870_LDO_CD */
61 { 0, 1, 0x00 }, /* 0x26 AAT2870_LDO_EN */
64 static struct mfd_cell aat2870_devs[] = {
66 .name = "aat2870-backlight",
67 .id = AAT2870_ID_BL,
68 .pdata_size = sizeof(struct aat2870_bl_platform_data),
71 .name = "aat2870-regulator",
72 .id = AAT2870_ID_LDOA,
73 .pdata_size = sizeof(struct regulator_init_data),
76 .name = "aat2870-regulator",
77 .id = AAT2870_ID_LDOB,
78 .pdata_size = sizeof(struct regulator_init_data),
81 .name = "aat2870-regulator",
82 .id = AAT2870_ID_LDOC,
83 .pdata_size = sizeof(struct regulator_init_data),
86 .name = "aat2870-regulator",
87 .id = AAT2870_ID_LDOD,
88 .pdata_size = sizeof(struct regulator_init_data),
92 static int __aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val)
94 int ret;
96 if (addr >= AAT2870_REG_NUM) {
97 dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
98 return -EINVAL;
101 if (!aat2870->reg_cache[addr].readable) {
102 *val = aat2870->reg_cache[addr].value;
103 goto out;
106 ret = i2c_master_send(aat2870->client, &addr, 1);
107 if (ret < 0)
108 return ret;
109 if (ret != 1)
110 return -EIO;
112 ret = i2c_master_recv(aat2870->client, val, 1);
113 if (ret < 0)
114 return ret;
115 if (ret != 1)
116 return -EIO;
118 out:
119 dev_dbg(aat2870->dev, "read: addr=0x%02x, val=0x%02x\n", addr, *val);
120 return 0;
123 static int __aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val)
125 u8 msg[2];
126 int ret;
128 if (addr >= AAT2870_REG_NUM) {
129 dev_err(aat2870->dev, "Invalid address, 0x%02x\n", addr);
130 return -EINVAL;
133 if (!aat2870->reg_cache[addr].writeable) {
134 dev_err(aat2870->dev, "Address 0x%02x is not writeable\n",
135 addr);
136 return -EINVAL;
139 msg[0] = addr;
140 msg[1] = val;
141 ret = i2c_master_send(aat2870->client, msg, 2);
142 if (ret < 0)
143 return ret;
144 if (ret != 2)
145 return -EIO;
147 aat2870->reg_cache[addr].value = val;
149 dev_dbg(aat2870->dev, "write: addr=0x%02x, val=0x%02x\n", addr, val);
150 return 0;
153 static int aat2870_read(struct aat2870_data *aat2870, u8 addr, u8 *val)
155 int ret;
157 mutex_lock(&aat2870->io_lock);
158 ret = __aat2870_read(aat2870, addr, val);
159 mutex_unlock(&aat2870->io_lock);
161 return ret;
164 static int aat2870_write(struct aat2870_data *aat2870, u8 addr, u8 val)
166 int ret;
168 mutex_lock(&aat2870->io_lock);
169 ret = __aat2870_write(aat2870, addr, val);
170 mutex_unlock(&aat2870->io_lock);
172 return ret;
175 static int aat2870_update(struct aat2870_data *aat2870, u8 addr, u8 mask,
176 u8 val)
178 int change;
179 u8 old_val, new_val;
180 int ret;
182 mutex_lock(&aat2870->io_lock);
184 ret = __aat2870_read(aat2870, addr, &old_val);
185 if (ret)
186 goto out_unlock;
188 new_val = (old_val & ~mask) | (val & mask);
189 change = old_val != new_val;
190 if (change)
191 ret = __aat2870_write(aat2870, addr, new_val);
193 out_unlock:
194 mutex_unlock(&aat2870->io_lock);
196 return ret;
199 static inline void aat2870_enable(struct aat2870_data *aat2870)
201 if (aat2870->en_pin >= 0)
202 gpio_set_value(aat2870->en_pin, 1);
204 aat2870->is_enable = 1;
207 static inline void aat2870_disable(struct aat2870_data *aat2870)
209 if (aat2870->en_pin >= 0)
210 gpio_set_value(aat2870->en_pin, 0);
212 aat2870->is_enable = 0;
215 #ifdef CONFIG_DEBUG_FS
216 static ssize_t aat2870_dump_reg(struct aat2870_data *aat2870, char *buf)
218 u8 addr, val;
219 ssize_t count = 0;
220 int ret;
222 count += sprintf(buf, "aat2870 registers\n");
223 for (addr = 0; addr < AAT2870_REG_NUM; addr++) {
224 count += sprintf(buf + count, "0x%02x: ", addr);
225 if (count >= PAGE_SIZE - 1)
226 break;
228 ret = aat2870->read(aat2870, addr, &val);
229 if (ret == 0)
230 count += snprintf(buf + count, PAGE_SIZE - count,
231 "0x%02x", val);
232 else
233 count += snprintf(buf + count, PAGE_SIZE - count,
234 "<read fail: %d>", ret);
236 if (count >= PAGE_SIZE - 1)
237 break;
239 count += snprintf(buf + count, PAGE_SIZE - count, "\n");
240 if (count >= PAGE_SIZE - 1)
241 break;
244 /* Truncate count; min() would cause a warning */
245 if (count >= PAGE_SIZE)
246 count = PAGE_SIZE - 1;
248 return count;
251 static ssize_t aat2870_reg_read_file(struct file *file, char __user *user_buf,
252 size_t count, loff_t *ppos)
254 struct aat2870_data *aat2870 = file->private_data;
255 char *buf;
256 ssize_t ret;
258 buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
259 if (!buf)
260 return -ENOMEM;
262 ret = aat2870_dump_reg(aat2870, buf);
263 if (ret >= 0)
264 ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
266 kfree(buf);
268 return ret;
271 static ssize_t aat2870_reg_write_file(struct file *file,
272 const char __user *user_buf, size_t count,
273 loff_t *ppos)
275 struct aat2870_data *aat2870 = file->private_data;
276 char buf[32];
277 ssize_t buf_size;
278 char *start = buf;
279 unsigned long addr, val;
280 int ret;
282 buf_size = min(count, (size_t)(sizeof(buf)-1));
283 if (copy_from_user(buf, user_buf, buf_size)) {
284 dev_err(aat2870->dev, "Failed to copy from user\n");
285 return -EFAULT;
287 buf[buf_size] = 0;
289 while (*start == ' ')
290 start++;
292 ret = kstrtoul(start, 16, &addr);
293 if (ret)
294 return ret;
296 if (addr >= AAT2870_REG_NUM) {
297 dev_err(aat2870->dev, "Invalid address, 0x%lx\n", addr);
298 return -EINVAL;
301 while (*start == ' ')
302 start++;
304 ret = kstrtoul(start, 16, &val);
305 if (ret)
306 return ret;
308 ret = aat2870->write(aat2870, (u8)addr, (u8)val);
309 if (ret)
310 return ret;
312 return buf_size;
315 static const struct file_operations aat2870_reg_fops = {
316 .open = simple_open,
317 .read = aat2870_reg_read_file,
318 .write = aat2870_reg_write_file,
321 static void aat2870_init_debugfs(struct aat2870_data *aat2870)
323 aat2870->dentry_root = debugfs_create_dir("aat2870", NULL);
325 debugfs_create_file("regs", 0644, aat2870->dentry_root, aat2870,
326 &aat2870_reg_fops);
329 #else
330 static inline void aat2870_init_debugfs(struct aat2870_data *aat2870)
333 #endif /* CONFIG_DEBUG_FS */
335 static int aat2870_i2c_probe(struct i2c_client *client,
336 const struct i2c_device_id *id)
338 struct aat2870_platform_data *pdata = dev_get_platdata(&client->dev);
339 struct aat2870_data *aat2870;
340 int i, j;
341 int ret = 0;
343 aat2870 = devm_kzalloc(&client->dev, sizeof(struct aat2870_data),
344 GFP_KERNEL);
345 if (!aat2870)
346 return -ENOMEM;
348 aat2870->dev = &client->dev;
349 dev_set_drvdata(aat2870->dev, aat2870);
351 aat2870->client = client;
352 i2c_set_clientdata(client, aat2870);
354 aat2870->reg_cache = aat2870_regs;
356 if (pdata->en_pin < 0)
357 aat2870->en_pin = -1;
358 else
359 aat2870->en_pin = pdata->en_pin;
361 aat2870->init = pdata->init;
362 aat2870->uninit = pdata->uninit;
363 aat2870->read = aat2870_read;
364 aat2870->write = aat2870_write;
365 aat2870->update = aat2870_update;
367 mutex_init(&aat2870->io_lock);
369 if (aat2870->init)
370 aat2870->init(aat2870);
372 if (aat2870->en_pin >= 0) {
373 ret = devm_gpio_request_one(&client->dev, aat2870->en_pin,
374 GPIOF_OUT_INIT_HIGH, "aat2870-en");
375 if (ret < 0) {
376 dev_err(&client->dev,
377 "Failed to request GPIO %d\n", aat2870->en_pin);
378 return ret;
382 aat2870_enable(aat2870);
384 for (i = 0; i < pdata->num_subdevs; i++) {
385 for (j = 0; j < ARRAY_SIZE(aat2870_devs); j++) {
386 if ((pdata->subdevs[i].id == aat2870_devs[j].id) &&
387 !strcmp(pdata->subdevs[i].name,
388 aat2870_devs[j].name)) {
389 aat2870_devs[j].platform_data =
390 pdata->subdevs[i].platform_data;
391 break;
396 ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs,
397 ARRAY_SIZE(aat2870_devs), NULL, 0, NULL);
398 if (ret != 0) {
399 dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret);
400 goto out_disable;
403 aat2870_init_debugfs(aat2870);
405 return 0;
407 out_disable:
408 aat2870_disable(aat2870);
409 return ret;
412 #ifdef CONFIG_PM_SLEEP
413 static int aat2870_i2c_suspend(struct device *dev)
415 struct i2c_client *client = to_i2c_client(dev);
416 struct aat2870_data *aat2870 = i2c_get_clientdata(client);
418 aat2870_disable(aat2870);
420 return 0;
423 static int aat2870_i2c_resume(struct device *dev)
425 struct i2c_client *client = to_i2c_client(dev);
426 struct aat2870_data *aat2870 = i2c_get_clientdata(client);
427 struct aat2870_register *reg = NULL;
428 int i;
430 aat2870_enable(aat2870);
432 /* restore registers */
433 for (i = 0; i < AAT2870_REG_NUM; i++) {
434 reg = &aat2870->reg_cache[i];
435 if (reg->writeable)
436 aat2870->write(aat2870, i, reg->value);
439 return 0;
441 #endif /* CONFIG_PM_SLEEP */
443 static SIMPLE_DEV_PM_OPS(aat2870_pm_ops, aat2870_i2c_suspend,
444 aat2870_i2c_resume);
446 static const struct i2c_device_id aat2870_i2c_id_table[] = {
447 { "aat2870", 0 },
451 static struct i2c_driver aat2870_i2c_driver = {
452 .driver = {
453 .name = "aat2870",
454 .pm = &aat2870_pm_ops,
455 .suppress_bind_attrs = true,
457 .probe = aat2870_i2c_probe,
458 .id_table = aat2870_i2c_id_table,
461 static int __init aat2870_init(void)
463 return i2c_add_driver(&aat2870_i2c_driver);
465 subsys_initcall(aat2870_init);