drivers/mfd/rc5t583.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Core driver access RC5T583 power management chip.
   4  *
   5  * Copyright (c) 2011-2012, NVIDIA CORPORATION.  All rights reserved.
   6  * Author: Laxman dewangan <ldewangan@nvidia.com>
   7  *
   8  * Based on code
   9  *      Copyright (C) 2011 RICOH COMPANY,LTD
  10  */
  11 #include <linux/interrupt.h>
  12 #include <linux/irq.h>
  13 #include <linux/kernel.h>
  14 #include <linux/init.h>
  15 #include <linux/err.h>
  16 #include <linux/slab.h>
  17 #include <linux/i2c.h>
  18 #include <linux/mfd/core.h>
  19 #include <linux/mfd/rc5t583.h>
  20 #include <linux/regmap.h>
  21
  22 #define RICOH_ONOFFSEL_REG      0x10
  23 #define RICOH_SWCTL_REG         0x5E
  24
  25 struct deepsleep_control_data {
  26         u8 reg_add;
  27         u8 ds_pos_bit;
  28 };
  29
  30 #define DEEPSLEEP_INIT(_id, _reg, _pos)         \
  31         {                                       \
  32                 .reg_add = RC5T583_##_reg,      \
  33                 .ds_pos_bit = _pos,             \
  34         }
  35
  36 static struct deepsleep_control_data deepsleep_data[] = {
  37         DEEPSLEEP_INIT(DC0, SLPSEQ1, 0),
  38         DEEPSLEEP_INIT(DC1, SLPSEQ1, 4),
  39         DEEPSLEEP_INIT(DC2, SLPSEQ2, 0),
  40         DEEPSLEEP_INIT(DC3, SLPSEQ2, 4),
  41         DEEPSLEEP_INIT(LDO0, SLPSEQ3, 0),
  42         DEEPSLEEP_INIT(LDO1, SLPSEQ3, 4),
  43         DEEPSLEEP_INIT(LDO2, SLPSEQ4, 0),
  44         DEEPSLEEP_INIT(LDO3, SLPSEQ4, 4),
  45         DEEPSLEEP_INIT(LDO4, SLPSEQ5, 0),
  46         DEEPSLEEP_INIT(LDO5, SLPSEQ5, 4),
  47         DEEPSLEEP_INIT(LDO6, SLPSEQ6, 0),
  48         DEEPSLEEP_INIT(LDO7, SLPSEQ6, 4),
  49         DEEPSLEEP_INIT(LDO8, SLPSEQ7, 0),
  50         DEEPSLEEP_INIT(LDO9, SLPSEQ7, 4),
  51         DEEPSLEEP_INIT(PSO0, SLPSEQ8, 0),
  52         DEEPSLEEP_INIT(PSO1, SLPSEQ8, 4),
  53         DEEPSLEEP_INIT(PSO2, SLPSEQ9, 0),
  54         DEEPSLEEP_INIT(PSO3, SLPSEQ9, 4),
  55         DEEPSLEEP_INIT(PSO4, SLPSEQ10, 0),
  56         DEEPSLEEP_INIT(PSO5, SLPSEQ10, 4),
  57         DEEPSLEEP_INIT(PSO6, SLPSEQ11, 0),
  58         DEEPSLEEP_INIT(PSO7, SLPSEQ11, 4),
  59 };
  60
  61 #define EXT_PWR_REQ             \
  62         (RC5T583_EXT_PWRREQ1_CONTROL | RC5T583_EXT_PWRREQ2_CONTROL)
  63
  64 static const struct mfd_cell rc5t583_subdevs[] = {
  65         {.name = "rc5t583-gpio",},
  66         {.name = "rc5t583-regulator",},
  67         {.name = "rc5t583-rtc",      },
  68         {.name = "rc5t583-key",      }
  69 };
  70
  71 static int __rc5t583_set_ext_pwrreq1_control(struct device *dev,
  72         int id, int ext_pwr, int slots)
  73 {
  74         int ret;
  75         uint8_t sleepseq_val = 0;
  76         unsigned int en_bit;
  77         unsigned int slot_bit;
  78
  79         if (id == RC5T583_DS_DC0) {
  80                 dev_err(dev, "PWRREQ1 is invalid control for rail %d\n", id);
  81                 return -EINVAL;
  82         }
  83
  84         en_bit = deepsleep_data[id].ds_pos_bit;
  85         slot_bit = en_bit + 1;
  86         ret = rc5t583_read(dev, deepsleep_data[id].reg_add, &sleepseq_val);
  87         if (ret < 0) {
  88                 dev_err(dev, "Error in reading reg 0x%x\n",
  89                                 deepsleep_data[id].reg_add);
  90                 return ret;
  91         }
  92
  93         sleepseq_val &= ~(0xF << en_bit);
  94         sleepseq_val |= BIT(en_bit);
  95         sleepseq_val |= ((slots & 0x7) << slot_bit);
  96         ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(1));
  97         if (ret < 0) {
  98                 dev_err(dev, "Error in updating the 0x%02x register\n",
  99                                 RICOH_ONOFFSEL_REG);
 100                 return ret;
 101         }
 102
 103         ret = rc5t583_write(dev, deepsleep_data[id].reg_add, sleepseq_val);
 104         if (ret < 0) {
 105                 dev_err(dev, "Error in writing reg 0x%x\n",
 106                                 deepsleep_data[id].reg_add);
 107                 return ret;
 108         }
 109
 110         if (id == RC5T583_DS_LDO4) {
 111                 ret = rc5t583_write(dev, RICOH_SWCTL_REG, 0x1);
 112                 if (ret < 0)
 113                         dev_err(dev, "Error in writing reg 0x%x\n",
 114                                 RICOH_SWCTL_REG);
 115         }
 116         return ret;
 117 }
 118
 119 static int __rc5t583_set_ext_pwrreq2_control(struct device *dev,
 120         int id, int ext_pwr)
 121 {
 122         int ret;
 123
 124         if (id != RC5T583_DS_DC0) {
 125                 dev_err(dev, "PWRREQ2 is invalid control for rail %d\n", id);
 126                 return -EINVAL;
 127         }
 128
 129         ret = rc5t583_set_bits(dev, RICOH_ONOFFSEL_REG, BIT(2));
 130         if (ret < 0)
 131                 dev_err(dev, "Error in updating the ONOFFSEL 0x10 register\n");
 132         return ret;
 133 }
 134
 135 int rc5t583_ext_power_req_config(struct device *dev, int ds_id,
 136         int ext_pwr_req, int deepsleep_slot_nr)
 137 {
 138         if ((ext_pwr_req & EXT_PWR_REQ) == EXT_PWR_REQ)
 139                 return -EINVAL;
 140
 141         if (ext_pwr_req & RC5T583_EXT_PWRREQ1_CONTROL)
 142                 return __rc5t583_set_ext_pwrreq1_control(dev, ds_id,
 143                                 ext_pwr_req, deepsleep_slot_nr);
 144
 145         if (ext_pwr_req & RC5T583_EXT_PWRREQ2_CONTROL)
 146                 return __rc5t583_set_ext_pwrreq2_control(dev,
 147                         ds_id, ext_pwr_req);
 148         return 0;
 149 }
 150 EXPORT_SYMBOL(rc5t583_ext_power_req_config);
 151
 152 static int rc5t583_clear_ext_power_req(struct rc5t583 *rc5t583,
 153         struct rc5t583_platform_data *pdata)
 154 {
 155         int ret;
 156         int i;
 157         uint8_t on_off_val = 0;
 158
 159         /*  Clear ONOFFSEL register */
 160         if (pdata->enable_shutdown)
 161                 on_off_val = 0x1;
 162
 163         ret = rc5t583_write(rc5t583->dev, RICOH_ONOFFSEL_REG, on_off_val);
 164         if (ret < 0)
 165                 dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n",
 166                                         RICOH_ONOFFSEL_REG, ret);
 167
 168         ret = rc5t583_write(rc5t583->dev, RICOH_SWCTL_REG, 0x0);
 169         if (ret < 0)
 170                 dev_warn(rc5t583->dev, "Error in writing reg %d error: %d\n",
 171                                         RICOH_SWCTL_REG, ret);
 172
 173         /* Clear sleep sequence register */
 174         for (i = RC5T583_SLPSEQ1; i <= RC5T583_SLPSEQ11; ++i) {
 175                 ret = rc5t583_write(rc5t583->dev, i, 0x0);
 176                 if (ret < 0)
 177                         dev_warn(rc5t583->dev,
 178                                 "Error in writing reg 0x%02x error: %d\n",
 179                                 i, ret);
 180         }
 181         return 0;
 182 }
 183
 184 static bool volatile_reg(struct device *dev, unsigned int reg)
 185 {
 186         /* Enable caching in interrupt registers */
 187         switch (reg) {
 188         case RC5T583_INT_EN_SYS1:
 189         case RC5T583_INT_EN_SYS2:
 190         case RC5T583_INT_EN_DCDC:
 191         case RC5T583_INT_EN_RTC:
 192         case RC5T583_INT_EN_ADC1:
 193         case RC5T583_INT_EN_ADC2:
 194         case RC5T583_INT_EN_ADC3:
 195         case RC5T583_GPIO_GPEDGE1:
 196         case RC5T583_GPIO_GPEDGE2:
 197         case RC5T583_GPIO_EN_INT:
 198                 return false;
 199
 200         case RC5T583_GPIO_MON_IOIN:
 201                 /* This is gpio input register */
 202                 return true;
 203
 204         default:
 205                 /* Enable caching in gpio registers */
 206                 if ((reg >= RC5T583_GPIO_IOSEL) &&
 207                                 (reg <= RC5T583_GPIO_GPOFUNC))
 208                         return false;
 209
 210                 /* Enable caching in sleep seq registers */
 211                 if ((reg >= RC5T583_SLPSEQ1) && (reg <= RC5T583_SLPSEQ11))
 212                         return false;
 213
 214                 /* Enable caching of regulator registers */
 215                 if ((reg >= RC5T583_REG_DC0CTL) && (reg <= RC5T583_REG_SR3CTL))
 216                         return false;
 217                 if ((reg >= RC5T583_REG_LDOEN1) &&
 218                                         (reg <= RC5T583_REG_LDO9DAC_DS))
 219                         return false;
 220
 221                 break;
 222         }
 223
 224         return true;
 225 }
 226
 227 static const struct regmap_config rc5t583_regmap_config = {
 228         .reg_bits = 8,
 229         .val_bits = 8,
 230         .volatile_reg = volatile_reg,
 231         .max_register = RC5T583_MAX_REG,
 232         .num_reg_defaults_raw = RC5T583_NUM_REGS,
 233         .cache_type = REGCACHE_RBTREE,
 234 };
 235
 236 static int rc5t583_i2c_probe(struct i2c_client *i2c,
 237                               const struct i2c_device_id *id)
 238 {
 239         struct rc5t583 *rc5t583;
 240         struct rc5t583_platform_data *pdata = dev_get_platdata(&i2c->dev);
 241         int ret;
 242
 243         if (!pdata) {
 244                 dev_err(&i2c->dev, "Err: Platform data not found\n");
 245                 return -EINVAL;
 246         }
 247
 248         rc5t583 = devm_kzalloc(&i2c->dev, sizeof(*rc5t583), GFP_KERNEL);
 249         if (!rc5t583)
 250                 return -ENOMEM;
 251
 252         rc5t583->dev = &i2c->dev;
 253         i2c_set_clientdata(i2c, rc5t583);
 254
 255         rc5t583->regmap = devm_regmap_init_i2c(i2c, &rc5t583_regmap_config);
 256         if (IS_ERR(rc5t583->regmap)) {
 257                 ret = PTR_ERR(rc5t583->regmap);
 258                 dev_err(&i2c->dev, "regmap initialization failed: %d\n", ret);
 259                 return ret;
 260         }
 261
 262         ret = rc5t583_clear_ext_power_req(rc5t583, pdata);
 263         if (ret < 0)
 264                 return ret;
 265
 266         if (i2c->irq) {
 267                 ret = rc5t583_irq_init(rc5t583, i2c->irq, pdata->irq_base);
 268                 /* Still continue with warning, if irq init fails */
 269                 if (ret)
 270                         dev_warn(&i2c->dev, "IRQ init failed: %d\n", ret);
 271         }
 272
 273         ret = devm_mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs,
 274                                    ARRAY_SIZE(rc5t583_subdevs), NULL, 0, NULL);
 275         if (ret) {
 276                 dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret);
 277                 return ret;
 278         }
 279
 280         return 0;
 281 }
 282
 283 static const struct i2c_device_id rc5t583_i2c_id[] = {
 284         {.name = "rc5t583", .driver_data = 0},
 285         {}
 286 };
 287
 288 static struct i2c_driver rc5t583_i2c_driver = {
 289         .driver = {
 290                    .name = "rc5t583",
 291                    },
 292         .probe = rc5t583_i2c_probe,
 293         .id_table = rc5t583_i2c_id,
 294 };
 295
 296 static int __init rc5t583_i2c_init(void)
 297 {
 298         return i2c_add_driver(&rc5t583_i2c_driver);
 299 }
 300 subsys_initcall(rc5t583_i2c_init);