1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * davinci_mmc.c - TI DaVinci MMC/SD/SDIO driver
5 * Copyright (C) 2006 Texas Instruments.
6 * Original author: Purushotam Kumar
7 * Copyright (C) 2009 David Brownell
10 #include <linux/module.h>
11 #include <linux/ioport.h>
12 #include <linux/platform_device.h>
13 #include <linux/clk.h>
14 #include <linux/err.h>
15 #include <linux/cpufreq.h>
16 #include <linux/mmc/host.h>
18 #include <linux/irq.h>
19 #include <linux/delay.h>
20 #include <linux/dmaengine.h>
21 #include <linux/dma-mapping.h>
22 #include <linux/mmc/mmc.h>
24 #include <linux/of_device.h>
25 #include <linux/mmc/slot-gpio.h>
26 #include <linux/interrupt.h>
28 #include <linux/platform_data/mmc-davinci.h>
31 * Register Definitions
33 #define DAVINCI_MMCCTL 0x00 /* Control Register */
34 #define DAVINCI_MMCCLK 0x04 /* Memory Clock Control Register */
35 #define DAVINCI_MMCST0 0x08 /* Status Register 0 */
36 #define DAVINCI_MMCST1 0x0C /* Status Register 1 */
37 #define DAVINCI_MMCIM 0x10 /* Interrupt Mask Register */
38 #define DAVINCI_MMCTOR 0x14 /* Response Time-Out Register */
39 #define DAVINCI_MMCTOD 0x18 /* Data Read Time-Out Register */
40 #define DAVINCI_MMCBLEN 0x1C /* Block Length Register */
41 #define DAVINCI_MMCNBLK 0x20 /* Number of Blocks Register */
42 #define DAVINCI_MMCNBLC 0x24 /* Number of Blocks Counter Register */
43 #define DAVINCI_MMCDRR 0x28 /* Data Receive Register */
44 #define DAVINCI_MMCDXR 0x2C /* Data Transmit Register */
45 #define DAVINCI_MMCCMD 0x30 /* Command Register */
46 #define DAVINCI_MMCARGHL 0x34 /* Argument Register */
47 #define DAVINCI_MMCRSP01 0x38 /* Response Register 0 and 1 */
48 #define DAVINCI_MMCRSP23 0x3C /* Response Register 0 and 1 */
49 #define DAVINCI_MMCRSP45 0x40 /* Response Register 0 and 1 */
50 #define DAVINCI_MMCRSP67 0x44 /* Response Register 0 and 1 */
51 #define DAVINCI_MMCDRSP 0x48 /* Data Response Register */
52 #define DAVINCI_MMCETOK 0x4C
53 #define DAVINCI_MMCCIDX 0x50 /* Command Index Register */
54 #define DAVINCI_MMCCKC 0x54
55 #define DAVINCI_MMCTORC 0x58
56 #define DAVINCI_MMCTODC 0x5C
57 #define DAVINCI_MMCBLNC 0x60
58 #define DAVINCI_SDIOCTL 0x64
59 #define DAVINCI_SDIOST0 0x68
60 #define DAVINCI_SDIOIEN 0x6C
61 #define DAVINCI_SDIOIST 0x70
62 #define DAVINCI_MMCFIFOCTL 0x74 /* FIFO Control Register */
64 /* DAVINCI_MMCCTL definitions */
65 #define MMCCTL_DATRST (1 << 0)
66 #define MMCCTL_CMDRST (1 << 1)
67 #define MMCCTL_WIDTH_8_BIT (1 << 8)
68 #define MMCCTL_WIDTH_4_BIT (1 << 2)
69 #define MMCCTL_DATEG_DISABLED (0 << 6)
70 #define MMCCTL_DATEG_RISING (1 << 6)
71 #define MMCCTL_DATEG_FALLING (2 << 6)
72 #define MMCCTL_DATEG_BOTH (3 << 6)
73 #define MMCCTL_PERMDR_LE (0 << 9)
74 #define MMCCTL_PERMDR_BE (1 << 9)
75 #define MMCCTL_PERMDX_LE (0 << 10)
76 #define MMCCTL_PERMDX_BE (1 << 10)
78 /* DAVINCI_MMCCLK definitions */
79 #define MMCCLK_CLKEN (1 << 8)
80 #define MMCCLK_CLKRT_MASK (0xFF << 0)
82 /* IRQ bit definitions, for DAVINCI_MMCST0 and DAVINCI_MMCIM */
83 #define MMCST0_DATDNE BIT(0) /* data done */
84 #define MMCST0_BSYDNE BIT(1) /* busy done */
85 #define MMCST0_RSPDNE BIT(2) /* command done */
86 #define MMCST0_TOUTRD BIT(3) /* data read timeout */
87 #define MMCST0_TOUTRS BIT(4) /* command response timeout */
88 #define MMCST0_CRCWR BIT(5) /* data write CRC error */
89 #define MMCST0_CRCRD BIT(6) /* data read CRC error */
90 #define MMCST0_CRCRS BIT(7) /* command response CRC error */
91 #define MMCST0_DXRDY BIT(9) /* data transmit ready (fifo empty) */
92 #define MMCST0_DRRDY BIT(10) /* data receive ready (data in fifo)*/
93 #define MMCST0_DATED BIT(11) /* DAT3 edge detect */
94 #define MMCST0_TRNDNE BIT(12) /* transfer done */
96 /* DAVINCI_MMCST1 definitions */
97 #define MMCST1_BUSY (1 << 0)
99 /* DAVINCI_MMCCMD definitions */
100 #define MMCCMD_CMD_MASK (0x3F << 0)
101 #define MMCCMD_PPLEN (1 << 7)
102 #define MMCCMD_BSYEXP (1 << 8)
103 #define MMCCMD_RSPFMT_MASK (3 << 9)
104 #define MMCCMD_RSPFMT_NONE (0 << 9)
105 #define MMCCMD_RSPFMT_R1456 (1 << 9)
106 #define MMCCMD_RSPFMT_R2 (2 << 9)
107 #define MMCCMD_RSPFMT_R3 (3 << 9)
108 #define MMCCMD_DTRW (1 << 11)
109 #define MMCCMD_STRMTP (1 << 12)
110 #define MMCCMD_WDATX (1 << 13)
111 #define MMCCMD_INITCK (1 << 14)
112 #define MMCCMD_DCLR (1 << 15)
113 #define MMCCMD_DMATRIG (1 << 16)
115 /* DAVINCI_MMCFIFOCTL definitions */
116 #define MMCFIFOCTL_FIFORST (1 << 0)
117 #define MMCFIFOCTL_FIFODIR_WR (1 << 1)
118 #define MMCFIFOCTL_FIFODIR_RD (0 << 1)
119 #define MMCFIFOCTL_FIFOLEV (1 << 2) /* 0 = 128 bits, 1 = 256 bits */
120 #define MMCFIFOCTL_ACCWD_4 (0 << 3) /* access width of 4 bytes */
121 #define MMCFIFOCTL_ACCWD_3 (1 << 3) /* access width of 3 bytes */
122 #define MMCFIFOCTL_ACCWD_2 (2 << 3) /* access width of 2 bytes */
123 #define MMCFIFOCTL_ACCWD_1 (3 << 3) /* access width of 1 byte */
125 /* DAVINCI_SDIOST0 definitions */
126 #define SDIOST0_DAT1_HI BIT(0)
128 /* DAVINCI_SDIOIEN definitions */
129 #define SDIOIEN_IOINTEN BIT(0)
131 /* DAVINCI_SDIOIST definitions */
132 #define SDIOIST_IOINT BIT(0)
134 /* MMCSD Init clock in Hz in opendrain mode */
135 #define MMCSD_INIT_CLOCK 200000
138 * One scatterlist dma "segment" is at most MAX_CCNT rw_threshold units,
139 * and we handle up to MAX_NR_SG segments. MMC_BLOCK_BOUNCE kicks in only
140 * for drivers with max_segs == 1, making the segments bigger (64KB)
141 * than the page or two that's otherwise typical. nr_sg (passed from
142 * platform data) == 16 gives at least the same throughput boost, using
143 * EDMA transfer linkage instead of spending CPU time copying pages.
145 #define MAX_CCNT ((1 << 16) - 1)
149 static unsigned rw_threshold
= 32;
150 module_param(rw_threshold
, uint
, S_IRUGO
);
151 MODULE_PARM_DESC(rw_threshold
,
152 "Read/Write threshold. Default = 32");
154 static unsigned poll_threshold
= 128;
155 module_param(poll_threshold
, uint
, S_IRUGO
);
156 MODULE_PARM_DESC(poll_threshold
,
157 "Polling transaction size threshold. Default = 128");
159 static unsigned poll_loopcount
= 32;
160 module_param(poll_loopcount
, uint
, S_IRUGO
);
161 MODULE_PARM_DESC(poll_loopcount
,
162 "Maximum polling loop count. Default = 32");
164 static unsigned use_dma
= 1;
165 module_param(use_dma
, uint
, 0);
166 MODULE_PARM_DESC(use_dma
, "Whether to use DMA or not. Default = 1");
168 struct mmc_davinci_host
{
169 struct mmc_command
*cmd
;
170 struct mmc_data
*data
;
171 struct mmc_host
*mmc
;
173 unsigned int mmc_input_clk
;
175 struct resource
*mem_res
;
176 int mmc_irq
, sdio_irq
;
177 unsigned char bus_mode
;
179 #define DAVINCI_MMC_DATADIR_NONE 0
180 #define DAVINCI_MMC_DATADIR_READ 1
181 #define DAVINCI_MMC_DATADIR_WRITE 2
182 unsigned char data_dir
;
184 /* buffer is used during PIO of one scatterlist segment, and
185 * is updated along with buffer_bytes_left. bytes_left applies
186 * to all N blocks of the PIO transfer.
189 u32 buffer_bytes_left
;
192 struct dma_chan
*dma_tx
;
193 struct dma_chan
*dma_rx
;
199 /* For PIO we walk scatterlists one segment at a time. */
201 struct scatterlist
*sg
;
203 /* Version of the MMC/SD controller */
205 /* for ns in one cycle calculation */
206 unsigned ns_in_one_cycle
;
207 /* Number of sg segments */
209 #ifdef CONFIG_CPU_FREQ
210 struct notifier_block freq_transition
;
214 static irqreturn_t
mmc_davinci_irq(int irq
, void *dev_id
);
217 static void mmc_davinci_sg_to_buf(struct mmc_davinci_host
*host
)
219 host
->buffer_bytes_left
= sg_dma_len(host
->sg
);
220 host
->buffer
= sg_virt(host
->sg
);
221 if (host
->buffer_bytes_left
> host
->bytes_left
)
222 host
->buffer_bytes_left
= host
->bytes_left
;
225 static void davinci_fifo_data_trans(struct mmc_davinci_host
*host
,
231 if (host
->buffer_bytes_left
== 0) {
232 host
->sg
= sg_next(host
->data
->sg
);
233 mmc_davinci_sg_to_buf(host
);
237 if (n
> host
->buffer_bytes_left
)
238 n
= host
->buffer_bytes_left
;
239 host
->buffer_bytes_left
-= n
;
240 host
->bytes_left
-= n
;
242 /* NOTE: we never transfer more than rw_threshold bytes
243 * to/from the fifo here; there's no I/O overlap.
244 * This also assumes that access width( i.e. ACCWD) is 4 bytes
246 if (host
->data_dir
== DAVINCI_MMC_DATADIR_WRITE
) {
247 for (i
= 0; i
< (n
>> 2); i
++) {
248 writel(*((u32
*)p
), host
->base
+ DAVINCI_MMCDXR
);
252 iowrite8_rep(host
->base
+ DAVINCI_MMCDXR
, p
, (n
& 3));
256 for (i
= 0; i
< (n
>> 2); i
++) {
257 *((u32
*)p
) = readl(host
->base
+ DAVINCI_MMCDRR
);
261 ioread8_rep(host
->base
+ DAVINCI_MMCDRR
, p
, (n
& 3));
268 static void mmc_davinci_start_command(struct mmc_davinci_host
*host
,
269 struct mmc_command
*cmd
)
274 dev_dbg(mmc_dev(host
->mmc
), "CMD%d, arg 0x%08x%s\n",
275 cmd
->opcode
, cmd
->arg
,
277 switch (mmc_resp_type(cmd
)) {
279 s
= ", R1/R5/R6/R7 response";
282 s
= ", R1b response";
288 s
= ", R3/R4 response";
291 s
= ", (R? response)";
296 switch (mmc_resp_type(cmd
)) {
298 /* There's some spec confusion about when R1B is
299 * allowed, but if the card doesn't issue a BUSY
300 * then it's harmless for us to allow it.
302 cmd_reg
|= MMCCMD_BSYEXP
;
304 case MMC_RSP_R1
: /* 48 bits, CRC */
305 cmd_reg
|= MMCCMD_RSPFMT_R1456
;
307 case MMC_RSP_R2
: /* 136 bits, CRC */
308 cmd_reg
|= MMCCMD_RSPFMT_R2
;
310 case MMC_RSP_R3
: /* 48 bits, no CRC */
311 cmd_reg
|= MMCCMD_RSPFMT_R3
;
314 cmd_reg
|= MMCCMD_RSPFMT_NONE
;
315 dev_dbg(mmc_dev(host
->mmc
), "unknown resp_type %04x\n",
320 /* Set command index */
321 cmd_reg
|= cmd
->opcode
;
323 /* Enable EDMA transfer triggers */
325 cmd_reg
|= MMCCMD_DMATRIG
;
327 if (host
->version
== MMC_CTLR_VERSION_2
&& host
->data
!= NULL
&&
328 host
->data_dir
== DAVINCI_MMC_DATADIR_READ
)
329 cmd_reg
|= MMCCMD_DMATRIG
;
331 /* Setting whether command involves data transfer or not */
333 cmd_reg
|= MMCCMD_WDATX
;
335 /* Setting whether data read or write */
336 if (host
->data_dir
== DAVINCI_MMC_DATADIR_WRITE
)
337 cmd_reg
|= MMCCMD_DTRW
;
339 if (host
->bus_mode
== MMC_BUSMODE_PUSHPULL
)
340 cmd_reg
|= MMCCMD_PPLEN
;
342 /* set Command timeout */
343 writel(0x1FFF, host
->base
+ DAVINCI_MMCTOR
);
345 /* Enable interrupt (calculate here, defer until FIFO is stuffed). */
346 im_val
= MMCST0_RSPDNE
| MMCST0_CRCRS
| MMCST0_TOUTRS
;
347 if (host
->data_dir
== DAVINCI_MMC_DATADIR_WRITE
) {
348 im_val
|= MMCST0_DATDNE
| MMCST0_CRCWR
;
351 im_val
|= MMCST0_DXRDY
;
352 } else if (host
->data_dir
== DAVINCI_MMC_DATADIR_READ
) {
353 im_val
|= MMCST0_DATDNE
| MMCST0_CRCRD
| MMCST0_TOUTRD
;
356 im_val
|= MMCST0_DRRDY
;
360 * Before non-DMA WRITE commands the controller needs priming:
361 * FIFO should be populated with 32 bytes i.e. whatever is the FIFO size
363 if (!host
->do_dma
&& (host
->data_dir
== DAVINCI_MMC_DATADIR_WRITE
))
364 davinci_fifo_data_trans(host
, rw_threshold
);
366 writel(cmd
->arg
, host
->base
+ DAVINCI_MMCARGHL
);
367 writel(cmd_reg
, host
->base
+ DAVINCI_MMCCMD
);
369 host
->active_request
= true;
371 if (!host
->do_dma
&& host
->bytes_left
<= poll_threshold
) {
372 u32 count
= poll_loopcount
;
374 while (host
->active_request
&& count
--) {
375 mmc_davinci_irq(0, host
);
380 if (host
->active_request
)
381 writel(im_val
, host
->base
+ DAVINCI_MMCIM
);
384 /*----------------------------------------------------------------------*/
386 /* DMA infrastructure */
388 static void davinci_abort_dma(struct mmc_davinci_host
*host
)
390 struct dma_chan
*sync_dev
;
392 if (host
->data_dir
== DAVINCI_MMC_DATADIR_READ
)
393 sync_dev
= host
->dma_rx
;
395 sync_dev
= host
->dma_tx
;
397 dmaengine_terminate_all(sync_dev
);
400 static int mmc_davinci_send_dma_request(struct mmc_davinci_host
*host
,
401 struct mmc_data
*data
)
403 struct dma_chan
*chan
;
404 struct dma_async_tx_descriptor
*desc
;
407 if (host
->data_dir
== DAVINCI_MMC_DATADIR_WRITE
) {
408 struct dma_slave_config dma_tx_conf
= {
409 .direction
= DMA_MEM_TO_DEV
,
410 .dst_addr
= host
->mem_res
->start
+ DAVINCI_MMCDXR
,
411 .dst_addr_width
= DMA_SLAVE_BUSWIDTH_4_BYTES
,
413 rw_threshold
/ DMA_SLAVE_BUSWIDTH_4_BYTES
,
416 dmaengine_slave_config(host
->dma_tx
, &dma_tx_conf
);
418 desc
= dmaengine_prep_slave_sg(host
->dma_tx
,
422 DMA_PREP_INTERRUPT
| DMA_CTRL_ACK
);
424 dev_dbg(mmc_dev(host
->mmc
),
425 "failed to allocate DMA TX descriptor");
430 struct dma_slave_config dma_rx_conf
= {
431 .direction
= DMA_DEV_TO_MEM
,
432 .src_addr
= host
->mem_res
->start
+ DAVINCI_MMCDRR
,
433 .src_addr_width
= DMA_SLAVE_BUSWIDTH_4_BYTES
,
435 rw_threshold
/ DMA_SLAVE_BUSWIDTH_4_BYTES
,
438 dmaengine_slave_config(host
->dma_rx
, &dma_rx_conf
);
440 desc
= dmaengine_prep_slave_sg(host
->dma_rx
,
444 DMA_PREP_INTERRUPT
| DMA_CTRL_ACK
);
446 dev_dbg(mmc_dev(host
->mmc
),
447 "failed to allocate DMA RX descriptor");
453 dmaengine_submit(desc
);
454 dma_async_issue_pending(chan
);
460 static int mmc_davinci_start_dma_transfer(struct mmc_davinci_host
*host
,
461 struct mmc_data
*data
)
464 int mask
= rw_threshold
- 1;
467 host
->sg_len
= dma_map_sg(mmc_dev(host
->mmc
), data
->sg
, data
->sg_len
,
468 mmc_get_dma_dir(data
));
470 /* no individual DMA segment should need a partial FIFO */
471 for (i
= 0; i
< host
->sg_len
; i
++) {
472 if (sg_dma_len(data
->sg
+ i
) & mask
) {
473 dma_unmap_sg(mmc_dev(host
->mmc
),
474 data
->sg
, data
->sg_len
,
475 mmc_get_dma_dir(data
));
481 ret
= mmc_davinci_send_dma_request(host
, data
);
486 static void davinci_release_dma_channels(struct mmc_davinci_host
*host
)
491 dma_release_channel(host
->dma_tx
);
492 dma_release_channel(host
->dma_rx
);
495 static int davinci_acquire_dma_channels(struct mmc_davinci_host
*host
)
497 host
->dma_tx
= dma_request_chan(mmc_dev(host
->mmc
), "tx");
498 if (IS_ERR(host
->dma_tx
)) {
499 dev_err(mmc_dev(host
->mmc
), "Can't get dma_tx channel\n");
500 return PTR_ERR(host
->dma_tx
);
503 host
->dma_rx
= dma_request_chan(mmc_dev(host
->mmc
), "rx");
504 if (IS_ERR(host
->dma_rx
)) {
505 dev_err(mmc_dev(host
->mmc
), "Can't get dma_rx channel\n");
506 dma_release_channel(host
->dma_tx
);
507 return PTR_ERR(host
->dma_rx
);
513 /*----------------------------------------------------------------------*/
516 mmc_davinci_prepare_data(struct mmc_davinci_host
*host
, struct mmc_request
*req
)
518 int fifo_lev
= (rw_threshold
== 32) ? MMCFIFOCTL_FIFOLEV
: 0;
520 struct mmc_data
*data
= req
->data
;
522 if (host
->version
== MMC_CTLR_VERSION_2
)
523 fifo_lev
= (rw_threshold
== 64) ? MMCFIFOCTL_FIFOLEV
: 0;
527 host
->data_dir
= DAVINCI_MMC_DATADIR_NONE
;
528 writel(0, host
->base
+ DAVINCI_MMCBLEN
);
529 writel(0, host
->base
+ DAVINCI_MMCNBLK
);
533 dev_dbg(mmc_dev(host
->mmc
), "%s, %d blocks of %d bytes\n",
534 (data
->flags
& MMC_DATA_WRITE
) ? "write" : "read",
535 data
->blocks
, data
->blksz
);
536 dev_dbg(mmc_dev(host
->mmc
), " DTO %d cycles + %d ns\n",
537 data
->timeout_clks
, data
->timeout_ns
);
538 timeout
= data
->timeout_clks
+
539 (data
->timeout_ns
/ host
->ns_in_one_cycle
);
540 if (timeout
> 0xffff)
543 writel(timeout
, host
->base
+ DAVINCI_MMCTOD
);
544 writel(data
->blocks
, host
->base
+ DAVINCI_MMCNBLK
);
545 writel(data
->blksz
, host
->base
+ DAVINCI_MMCBLEN
);
547 /* Configure the FIFO */
548 if (data
->flags
& MMC_DATA_WRITE
) {
549 host
->data_dir
= DAVINCI_MMC_DATADIR_WRITE
;
550 writel(fifo_lev
| MMCFIFOCTL_FIFODIR_WR
| MMCFIFOCTL_FIFORST
,
551 host
->base
+ DAVINCI_MMCFIFOCTL
);
552 writel(fifo_lev
| MMCFIFOCTL_FIFODIR_WR
,
553 host
->base
+ DAVINCI_MMCFIFOCTL
);
555 host
->data_dir
= DAVINCI_MMC_DATADIR_READ
;
556 writel(fifo_lev
| MMCFIFOCTL_FIFODIR_RD
| MMCFIFOCTL_FIFORST
,
557 host
->base
+ DAVINCI_MMCFIFOCTL
);
558 writel(fifo_lev
| MMCFIFOCTL_FIFODIR_RD
,
559 host
->base
+ DAVINCI_MMCFIFOCTL
);
563 host
->bytes_left
= data
->blocks
* data
->blksz
;
565 /* For now we try to use DMA whenever we won't need partial FIFO
566 * reads or writes, either for the whole transfer (as tested here)
567 * or for any individual scatterlist segment (tested when we call
568 * start_dma_transfer).
570 * While we *could* change that, unusual block sizes are rarely
571 * used. The occasional fallback to PIO should't hurt.
573 if (host
->use_dma
&& (host
->bytes_left
& (rw_threshold
- 1)) == 0
574 && mmc_davinci_start_dma_transfer(host
, data
) == 0) {
575 /* zero this to ensure we take no PIO paths */
576 host
->bytes_left
= 0;
578 /* Revert to CPU Copy */
579 host
->sg_len
= data
->sg_len
;
580 host
->sg
= host
->data
->sg
;
581 mmc_davinci_sg_to_buf(host
);
585 static void mmc_davinci_request(struct mmc_host
*mmc
, struct mmc_request
*req
)
587 struct mmc_davinci_host
*host
= mmc_priv(mmc
);
588 unsigned long timeout
= jiffies
+ msecs_to_jiffies(900);
591 /* Card may still be sending BUSY after a previous operation,
592 * typically some kind of write. If so, we can't proceed yet.
594 while (time_before(jiffies
, timeout
)) {
595 mmcst1
= readl(host
->base
+ DAVINCI_MMCST1
);
596 if (!(mmcst1
& MMCST1_BUSY
))
600 if (mmcst1
& MMCST1_BUSY
) {
601 dev_err(mmc_dev(host
->mmc
), "still BUSY? bad ... \n");
602 req
->cmd
->error
= -ETIMEDOUT
;
603 mmc_request_done(mmc
, req
);
608 mmc_davinci_prepare_data(host
, req
);
609 mmc_davinci_start_command(host
, req
->cmd
);
612 static unsigned int calculate_freq_for_card(struct mmc_davinci_host
*host
,
613 unsigned int mmc_req_freq
)
615 unsigned int mmc_freq
= 0, mmc_pclk
= 0, mmc_push_pull_divisor
= 0;
617 mmc_pclk
= host
->mmc_input_clk
;
618 if (mmc_req_freq
&& mmc_pclk
> (2 * mmc_req_freq
))
619 mmc_push_pull_divisor
= ((unsigned int)mmc_pclk
620 / (2 * mmc_req_freq
)) - 1;
622 mmc_push_pull_divisor
= 0;
624 mmc_freq
= (unsigned int)mmc_pclk
625 / (2 * (mmc_push_pull_divisor
+ 1));
627 if (mmc_freq
> mmc_req_freq
)
628 mmc_push_pull_divisor
= mmc_push_pull_divisor
+ 1;
629 /* Convert ns to clock cycles */
630 if (mmc_req_freq
<= 400000)
631 host
->ns_in_one_cycle
= (1000000) / (((mmc_pclk
632 / (2 * (mmc_push_pull_divisor
+ 1)))/1000));
634 host
->ns_in_one_cycle
= (1000000) / (((mmc_pclk
635 / (2 * (mmc_push_pull_divisor
+ 1)))/1000000));
637 return mmc_push_pull_divisor
;
640 static void calculate_clk_divider(struct mmc_host
*mmc
, struct mmc_ios
*ios
)
642 unsigned int open_drain_freq
= 0, mmc_pclk
= 0;
643 unsigned int mmc_push_pull_freq
= 0;
644 struct mmc_davinci_host
*host
= mmc_priv(mmc
);
646 if (ios
->bus_mode
== MMC_BUSMODE_OPENDRAIN
) {
649 /* Ignoring the init clock value passed for fixing the inter
650 * operability with different cards.
652 open_drain_freq
= ((unsigned int)mmc_pclk
653 / (2 * MMCSD_INIT_CLOCK
)) - 1;
655 if (open_drain_freq
> 0xFF)
656 open_drain_freq
= 0xFF;
658 temp
= readl(host
->base
+ DAVINCI_MMCCLK
) & ~MMCCLK_CLKRT_MASK
;
659 temp
|= open_drain_freq
;
660 writel(temp
, host
->base
+ DAVINCI_MMCCLK
);
662 /* Convert ns to clock cycles */
663 host
->ns_in_one_cycle
= (1000000) / (MMCSD_INIT_CLOCK
/1000);
666 mmc_push_pull_freq
= calculate_freq_for_card(host
, ios
->clock
);
668 if (mmc_push_pull_freq
> 0xFF)
669 mmc_push_pull_freq
= 0xFF;
671 temp
= readl(host
->base
+ DAVINCI_MMCCLK
) & ~MMCCLK_CLKEN
;
672 writel(temp
, host
->base
+ DAVINCI_MMCCLK
);
676 temp
= readl(host
->base
+ DAVINCI_MMCCLK
) & ~MMCCLK_CLKRT_MASK
;
677 temp
|= mmc_push_pull_freq
;
678 writel(temp
, host
->base
+ DAVINCI_MMCCLK
);
680 writel(temp
| MMCCLK_CLKEN
, host
->base
+ DAVINCI_MMCCLK
);
686 static void mmc_davinci_set_ios(struct mmc_host
*mmc
, struct mmc_ios
*ios
)
688 struct mmc_davinci_host
*host
= mmc_priv(mmc
);
689 struct platform_device
*pdev
= to_platform_device(mmc
->parent
);
690 struct davinci_mmc_config
*config
= pdev
->dev
.platform_data
;
692 dev_dbg(mmc_dev(host
->mmc
),
693 "clock %dHz busmode %d powermode %d Vdd %04x\n",
694 ios
->clock
, ios
->bus_mode
, ios
->power_mode
,
697 switch (ios
->power_mode
) {
699 if (config
&& config
->set_power
)
700 config
->set_power(pdev
->id
, false);
703 if (config
&& config
->set_power
)
704 config
->set_power(pdev
->id
, true);
708 switch (ios
->bus_width
) {
709 case MMC_BUS_WIDTH_8
:
710 dev_dbg(mmc_dev(host
->mmc
), "Enabling 8 bit mode\n");
711 writel((readl(host
->base
+ DAVINCI_MMCCTL
) &
712 ~MMCCTL_WIDTH_4_BIT
) | MMCCTL_WIDTH_8_BIT
,
713 host
->base
+ DAVINCI_MMCCTL
);
715 case MMC_BUS_WIDTH_4
:
716 dev_dbg(mmc_dev(host
->mmc
), "Enabling 4 bit mode\n");
717 if (host
->version
== MMC_CTLR_VERSION_2
)
718 writel((readl(host
->base
+ DAVINCI_MMCCTL
) &
719 ~MMCCTL_WIDTH_8_BIT
) | MMCCTL_WIDTH_4_BIT
,
720 host
->base
+ DAVINCI_MMCCTL
);
722 writel(readl(host
->base
+ DAVINCI_MMCCTL
) |
724 host
->base
+ DAVINCI_MMCCTL
);
726 case MMC_BUS_WIDTH_1
:
727 dev_dbg(mmc_dev(host
->mmc
), "Enabling 1 bit mode\n");
728 if (host
->version
== MMC_CTLR_VERSION_2
)
729 writel(readl(host
->base
+ DAVINCI_MMCCTL
) &
730 ~(MMCCTL_WIDTH_8_BIT
| MMCCTL_WIDTH_4_BIT
),
731 host
->base
+ DAVINCI_MMCCTL
);
733 writel(readl(host
->base
+ DAVINCI_MMCCTL
) &
735 host
->base
+ DAVINCI_MMCCTL
);
739 calculate_clk_divider(mmc
, ios
);
741 host
->bus_mode
= ios
->bus_mode
;
742 if (ios
->power_mode
== MMC_POWER_UP
) {
743 unsigned long timeout
= jiffies
+ msecs_to_jiffies(50);
746 /* Send clock cycles, poll completion */
747 writel(0, host
->base
+ DAVINCI_MMCARGHL
);
748 writel(MMCCMD_INITCK
, host
->base
+ DAVINCI_MMCCMD
);
749 while (time_before(jiffies
, timeout
)) {
750 u32 tmp
= readl(host
->base
+ DAVINCI_MMCST0
);
752 if (tmp
& MMCST0_RSPDNE
) {
759 dev_warn(mmc_dev(host
->mmc
), "powerup timeout\n");
762 /* FIXME on power OFF, reset things ... */
766 mmc_davinci_xfer_done(struct mmc_davinci_host
*host
, struct mmc_data
*data
)
770 if (host
->mmc
->caps
& MMC_CAP_SDIO_IRQ
) {
772 * SDIO Interrupt Detection work-around as suggested by
773 * Davinci Errata (TMS320DM355 Silicon Revision 1.1 Errata
774 * 2.1.6): Signal SDIO interrupt only if it is enabled by core
776 if (host
->sdio_int
&& !(readl(host
->base
+ DAVINCI_SDIOST0
) &
778 writel(SDIOIST_IOINT
, host
->base
+ DAVINCI_SDIOIST
);
779 mmc_signal_sdio_irq(host
->mmc
);
784 davinci_abort_dma(host
);
786 dma_unmap_sg(mmc_dev(host
->mmc
), data
->sg
, data
->sg_len
,
787 mmc_get_dma_dir(data
));
788 host
->do_dma
= false;
790 host
->data_dir
= DAVINCI_MMC_DATADIR_NONE
;
792 if (!data
->stop
|| (host
->cmd
&& host
->cmd
->error
)) {
793 mmc_request_done(host
->mmc
, data
->mrq
);
794 writel(0, host
->base
+ DAVINCI_MMCIM
);
795 host
->active_request
= false;
797 mmc_davinci_start_command(host
, data
->stop
);
800 static void mmc_davinci_cmd_done(struct mmc_davinci_host
*host
,
801 struct mmc_command
*cmd
)
805 if (cmd
->flags
& MMC_RSP_PRESENT
) {
806 if (cmd
->flags
& MMC_RSP_136
) {
807 /* response type 2 */
808 cmd
->resp
[3] = readl(host
->base
+ DAVINCI_MMCRSP01
);
809 cmd
->resp
[2] = readl(host
->base
+ DAVINCI_MMCRSP23
);
810 cmd
->resp
[1] = readl(host
->base
+ DAVINCI_MMCRSP45
);
811 cmd
->resp
[0] = readl(host
->base
+ DAVINCI_MMCRSP67
);
813 /* response types 1, 1b, 3, 4, 5, 6 */
814 cmd
->resp
[0] = readl(host
->base
+ DAVINCI_MMCRSP67
);
818 if (host
->data
== NULL
|| cmd
->error
) {
819 if (cmd
->error
== -ETIMEDOUT
)
820 cmd
->mrq
->cmd
->retries
= 0;
821 mmc_request_done(host
->mmc
, cmd
->mrq
);
822 writel(0, host
->base
+ DAVINCI_MMCIM
);
823 host
->active_request
= false;
827 static inline void mmc_davinci_reset_ctrl(struct mmc_davinci_host
*host
,
832 temp
= readl(host
->base
+ DAVINCI_MMCCTL
);
834 temp
|= MMCCTL_CMDRST
| MMCCTL_DATRST
;
836 temp
&= ~(MMCCTL_CMDRST
| MMCCTL_DATRST
);
838 writel(temp
, host
->base
+ DAVINCI_MMCCTL
);
843 davinci_abort_data(struct mmc_davinci_host
*host
, struct mmc_data
*data
)
845 mmc_davinci_reset_ctrl(host
, 1);
846 mmc_davinci_reset_ctrl(host
, 0);
849 static irqreturn_t
mmc_davinci_sdio_irq(int irq
, void *dev_id
)
851 struct mmc_davinci_host
*host
= dev_id
;
854 status
= readl(host
->base
+ DAVINCI_SDIOIST
);
855 if (status
& SDIOIST_IOINT
) {
856 dev_dbg(mmc_dev(host
->mmc
),
857 "SDIO interrupt status %x\n", status
);
858 writel(status
| SDIOIST_IOINT
, host
->base
+ DAVINCI_SDIOIST
);
859 mmc_signal_sdio_irq(host
->mmc
);
864 static irqreturn_t
mmc_davinci_irq(int irq
, void *dev_id
)
866 struct mmc_davinci_host
*host
= (struct mmc_davinci_host
*)dev_id
;
867 unsigned int status
, qstatus
;
869 int end_transfer
= 0;
870 struct mmc_data
*data
= host
->data
;
872 if (host
->cmd
== NULL
&& host
->data
== NULL
) {
873 status
= readl(host
->base
+ DAVINCI_MMCST0
);
874 dev_dbg(mmc_dev(host
->mmc
),
875 "Spurious interrupt 0x%04x\n", status
);
876 /* Disable the interrupt from mmcsd */
877 writel(0, host
->base
+ DAVINCI_MMCIM
);
881 status
= readl(host
->base
+ DAVINCI_MMCST0
);
884 /* handle FIFO first when using PIO for data.
885 * bytes_left will decrease to zero as I/O progress and status will
886 * read zero over iteration because this controller status
887 * register(MMCST0) reports any status only once and it is cleared
888 * by read. So, it is not unbouned loop even in the case of
891 if (host
->bytes_left
&& (status
& (MMCST0_DXRDY
| MMCST0_DRRDY
))) {
892 unsigned long im_val
;
895 * If interrupts fire during the following loop, they will be
896 * handled by the handler, but the PIC will still buffer these.
897 * As a result, the handler will be called again to serve these
898 * needlessly. In order to avoid these spurious interrupts,
899 * keep interrupts masked during the loop.
901 im_val
= readl(host
->base
+ DAVINCI_MMCIM
);
902 writel(0, host
->base
+ DAVINCI_MMCIM
);
905 davinci_fifo_data_trans(host
, rw_threshold
);
906 status
= readl(host
->base
+ DAVINCI_MMCST0
);
908 } while (host
->bytes_left
&&
909 (status
& (MMCST0_DXRDY
| MMCST0_DRRDY
)));
912 * If an interrupt is pending, it is assumed it will fire when
913 * it is unmasked. This assumption is also taken when the MMCIM
914 * is first set. Otherwise, writing to MMCIM after reading the
915 * status is race-prone.
917 writel(im_val
, host
->base
+ DAVINCI_MMCIM
);
920 if (qstatus
& MMCST0_DATDNE
) {
921 /* All blocks sent/received, and CRC checks passed */
923 if ((host
->do_dma
== 0) && (host
->bytes_left
> 0)) {
924 /* if datasize < rw_threshold
925 * no RX ints are generated
927 davinci_fifo_data_trans(host
, host
->bytes_left
);
930 data
->bytes_xfered
= data
->blocks
* data
->blksz
;
932 dev_err(mmc_dev(host
->mmc
),
933 "DATDNE with no host->data\n");
937 if (qstatus
& MMCST0_TOUTRD
) {
938 /* Read data timeout */
939 data
->error
= -ETIMEDOUT
;
942 dev_dbg(mmc_dev(host
->mmc
),
943 "read data timeout, status %x\n",
946 davinci_abort_data(host
, data
);
949 if (qstatus
& (MMCST0_CRCWR
| MMCST0_CRCRD
)) {
951 data
->error
= -EILSEQ
;
954 /* NOTE: this controller uses CRCWR to report both CRC
955 * errors and timeouts (on writes). MMCDRSP values are
956 * only weakly documented, but 0x9f was clearly a timeout
957 * case and the two three-bit patterns in various SD specs
958 * (101, 010) aren't part of it ...
960 if (qstatus
& MMCST0_CRCWR
) {
961 u32 temp
= readb(host
->base
+ DAVINCI_MMCDRSP
);
964 data
->error
= -ETIMEDOUT
;
966 dev_dbg(mmc_dev(host
->mmc
), "data %s %s error\n",
967 (qstatus
& MMCST0_CRCWR
) ? "write" : "read",
968 (data
->error
== -ETIMEDOUT
) ? "timeout" : "CRC");
970 davinci_abort_data(host
, data
);
973 if (qstatus
& MMCST0_TOUTRS
) {
974 /* Command timeout */
976 dev_dbg(mmc_dev(host
->mmc
),
977 "CMD%d timeout, status %x\n",
978 host
->cmd
->opcode
, qstatus
);
979 host
->cmd
->error
= -ETIMEDOUT
;
982 davinci_abort_data(host
, data
);
988 if (qstatus
& MMCST0_CRCRS
) {
989 /* Command CRC error */
990 dev_dbg(mmc_dev(host
->mmc
), "Command CRC error\n");
992 host
->cmd
->error
= -EILSEQ
;
997 if (qstatus
& MMCST0_RSPDNE
) {
998 /* End of command phase */
999 end_command
= (int) host
->cmd
;
1003 mmc_davinci_cmd_done(host
, host
->cmd
);
1005 mmc_davinci_xfer_done(host
, data
);
1009 static int mmc_davinci_get_cd(struct mmc_host
*mmc
)
1011 struct platform_device
*pdev
= to_platform_device(mmc
->parent
);
1012 struct davinci_mmc_config
*config
= pdev
->dev
.platform_data
;
1014 if (config
&& config
->get_cd
)
1015 return config
->get_cd(pdev
->id
);
1017 return mmc_gpio_get_cd(mmc
);
1020 static int mmc_davinci_get_ro(struct mmc_host
*mmc
)
1022 struct platform_device
*pdev
= to_platform_device(mmc
->parent
);
1023 struct davinci_mmc_config
*config
= pdev
->dev
.platform_data
;
1025 if (config
&& config
->get_ro
)
1026 return config
->get_ro(pdev
->id
);
1028 return mmc_gpio_get_ro(mmc
);
1031 static void mmc_davinci_enable_sdio_irq(struct mmc_host
*mmc
, int enable
)
1033 struct mmc_davinci_host
*host
= mmc_priv(mmc
);
1036 if (!(readl(host
->base
+ DAVINCI_SDIOST0
) & SDIOST0_DAT1_HI
)) {
1037 writel(SDIOIST_IOINT
, host
->base
+ DAVINCI_SDIOIST
);
1038 mmc_signal_sdio_irq(host
->mmc
);
1040 host
->sdio_int
= true;
1041 writel(readl(host
->base
+ DAVINCI_SDIOIEN
) |
1042 SDIOIEN_IOINTEN
, host
->base
+ DAVINCI_SDIOIEN
);
1045 host
->sdio_int
= false;
1046 writel(readl(host
->base
+ DAVINCI_SDIOIEN
) & ~SDIOIEN_IOINTEN
,
1047 host
->base
+ DAVINCI_SDIOIEN
);
1051 static const struct mmc_host_ops mmc_davinci_ops
= {
1052 .request
= mmc_davinci_request
,
1053 .set_ios
= mmc_davinci_set_ios
,
1054 .get_cd
= mmc_davinci_get_cd
,
1055 .get_ro
= mmc_davinci_get_ro
,
1056 .enable_sdio_irq
= mmc_davinci_enable_sdio_irq
,
1059 /*----------------------------------------------------------------------*/
1061 #ifdef CONFIG_CPU_FREQ
1062 static int mmc_davinci_cpufreq_transition(struct notifier_block
*nb
,
1063 unsigned long val
, void *data
)
1065 struct mmc_davinci_host
*host
;
1066 unsigned int mmc_pclk
;
1067 struct mmc_host
*mmc
;
1068 unsigned long flags
;
1070 host
= container_of(nb
, struct mmc_davinci_host
, freq_transition
);
1072 mmc_pclk
= clk_get_rate(host
->clk
);
1074 if (val
== CPUFREQ_POSTCHANGE
) {
1075 spin_lock_irqsave(&mmc
->lock
, flags
);
1076 host
->mmc_input_clk
= mmc_pclk
;
1077 calculate_clk_divider(mmc
, &mmc
->ios
);
1078 spin_unlock_irqrestore(&mmc
->lock
, flags
);
1084 static inline int mmc_davinci_cpufreq_register(struct mmc_davinci_host
*host
)
1086 host
->freq_transition
.notifier_call
= mmc_davinci_cpufreq_transition
;
1088 return cpufreq_register_notifier(&host
->freq_transition
,
1089 CPUFREQ_TRANSITION_NOTIFIER
);
1092 static inline void mmc_davinci_cpufreq_deregister(struct mmc_davinci_host
*host
)
1094 cpufreq_unregister_notifier(&host
->freq_transition
,
1095 CPUFREQ_TRANSITION_NOTIFIER
);
1098 static inline int mmc_davinci_cpufreq_register(struct mmc_davinci_host
*host
)
1103 static inline void mmc_davinci_cpufreq_deregister(struct mmc_davinci_host
*host
)
1107 static void init_mmcsd_host(struct mmc_davinci_host
*host
)
1110 mmc_davinci_reset_ctrl(host
, 1);
1112 writel(0, host
->base
+ DAVINCI_MMCCLK
);
1113 writel(MMCCLK_CLKEN
, host
->base
+ DAVINCI_MMCCLK
);
1115 writel(0x1FFF, host
->base
+ DAVINCI_MMCTOR
);
1116 writel(0xFFFF, host
->base
+ DAVINCI_MMCTOD
);
1118 mmc_davinci_reset_ctrl(host
, 0);
1121 static const struct platform_device_id davinci_mmc_devtype
[] = {
1123 .name
= "dm6441-mmc",
1124 .driver_data
= MMC_CTLR_VERSION_1
,
1126 .name
= "da830-mmc",
1127 .driver_data
= MMC_CTLR_VERSION_2
,
1131 MODULE_DEVICE_TABLE(platform
, davinci_mmc_devtype
);
1133 static const struct of_device_id davinci_mmc_dt_ids
[] = {
1135 .compatible
= "ti,dm6441-mmc",
1136 .data
= &davinci_mmc_devtype
[MMC_CTLR_VERSION_1
],
1139 .compatible
= "ti,da830-mmc",
1140 .data
= &davinci_mmc_devtype
[MMC_CTLR_VERSION_2
],
1144 MODULE_DEVICE_TABLE(of
, davinci_mmc_dt_ids
);
1146 static int mmc_davinci_parse_pdata(struct mmc_host
*mmc
)
1148 struct platform_device
*pdev
= to_platform_device(mmc
->parent
);
1149 struct davinci_mmc_config
*pdata
= pdev
->dev
.platform_data
;
1150 struct mmc_davinci_host
*host
;
1156 host
= mmc_priv(mmc
);
1160 if (pdata
&& pdata
->nr_sg
)
1161 host
->nr_sg
= pdata
->nr_sg
- 1;
1163 if (pdata
&& (pdata
->wires
== 4 || pdata
->wires
== 0))
1164 mmc
->caps
|= MMC_CAP_4_BIT_DATA
;
1166 if (pdata
&& (pdata
->wires
== 8))
1167 mmc
->caps
|= (MMC_CAP_4_BIT_DATA
| MMC_CAP_8_BIT_DATA
);
1169 mmc
->f_min
= 312500;
1170 mmc
->f_max
= 25000000;
1171 if (pdata
&& pdata
->max_freq
)
1172 mmc
->f_max
= pdata
->max_freq
;
1173 if (pdata
&& pdata
->caps
)
1174 mmc
->caps
|= pdata
->caps
;
1176 /* Register a cd gpio, if there is not one, enable polling */
1177 ret
= mmc_gpiod_request_cd(mmc
, "cd", 0, false, 0);
1178 if (ret
== -EPROBE_DEFER
)
1181 mmc
->caps
|= MMC_CAP_NEEDS_POLL
;
1183 ret
= mmc_gpiod_request_ro(mmc
, "wp", 0, 0);
1184 if (ret
== -EPROBE_DEFER
)
1190 static int davinci_mmcsd_probe(struct platform_device
*pdev
)
1192 const struct of_device_id
*match
;
1193 struct mmc_davinci_host
*host
= NULL
;
1194 struct mmc_host
*mmc
= NULL
;
1195 struct resource
*r
, *mem
= NULL
;
1198 const struct platform_device_id
*id_entry
;
1200 r
= platform_get_resource(pdev
, IORESOURCE_MEM
, 0);
1203 irq
= platform_get_irq(pdev
, 0);
1207 mem_size
= resource_size(r
);
1208 mem
= devm_request_mem_region(&pdev
->dev
, r
->start
, mem_size
,
1213 mmc
= mmc_alloc_host(sizeof(struct mmc_davinci_host
), &pdev
->dev
);
1217 host
= mmc_priv(mmc
);
1218 host
->mmc
= mmc
; /* Important */
1220 host
->mem_res
= mem
;
1221 host
->base
= devm_ioremap(&pdev
->dev
, mem
->start
, mem_size
);
1227 host
->clk
= devm_clk_get(&pdev
->dev
, NULL
);
1228 if (IS_ERR(host
->clk
)) {
1229 ret
= PTR_ERR(host
->clk
);
1232 ret
= clk_prepare_enable(host
->clk
);
1234 goto clk_prepare_enable_fail
;
1236 host
->mmc_input_clk
= clk_get_rate(host
->clk
);
1238 match
= of_match_device(davinci_mmc_dt_ids
, &pdev
->dev
);
1240 pdev
->id_entry
= match
->data
;
1241 ret
= mmc_of_parse(mmc
);
1243 if (ret
!= -EPROBE_DEFER
)
1245 "could not parse of data: %d\n", ret
);
1249 ret
= mmc_davinci_parse_pdata(mmc
);
1252 "could not parse platform data: %d\n", ret
);
1256 if (host
->nr_sg
> MAX_NR_SG
|| !host
->nr_sg
)
1257 host
->nr_sg
= MAX_NR_SG
;
1259 init_mmcsd_host(host
);
1261 host
->use_dma
= use_dma
;
1262 host
->mmc_irq
= irq
;
1263 host
->sdio_irq
= platform_get_irq(pdev
, 1);
1265 if (host
->use_dma
) {
1266 ret
= davinci_acquire_dma_channels(host
);
1267 if (ret
== -EPROBE_DEFER
)
1268 goto dma_probe_defer
;
1273 mmc
->caps
|= MMC_CAP_WAIT_WHILE_BUSY
;
1275 id_entry
= platform_get_device_id(pdev
);
1277 host
->version
= id_entry
->driver_data
;
1279 mmc
->ops
= &mmc_davinci_ops
;
1280 mmc
->ocr_avail
= MMC_VDD_32_33
| MMC_VDD_33_34
;
1282 /* With no iommu coalescing pages, each phys_seg is a hw_seg.
1283 * Each hw_seg uses one EDMA parameter RAM slot, always one
1284 * channel and then usually some linked slots.
1286 mmc
->max_segs
= MAX_NR_SG
;
1288 /* EDMA limit per hw segment (one or two MBytes) */
1289 mmc
->max_seg_size
= MAX_CCNT
* rw_threshold
;
1291 /* MMC/SD controller limits for multiblock requests */
1292 mmc
->max_blk_size
= 4095; /* BLEN is 12 bits */
1293 mmc
->max_blk_count
= 65535; /* NBLK is 16 bits */
1294 mmc
->max_req_size
= mmc
->max_blk_size
* mmc
->max_blk_count
;
1296 dev_dbg(mmc_dev(host
->mmc
), "max_segs=%d\n", mmc
->max_segs
);
1297 dev_dbg(mmc_dev(host
->mmc
), "max_blk_size=%d\n", mmc
->max_blk_size
);
1298 dev_dbg(mmc_dev(host
->mmc
), "max_req_size=%d\n", mmc
->max_req_size
);
1299 dev_dbg(mmc_dev(host
->mmc
), "max_seg_size=%d\n", mmc
->max_seg_size
);
1301 platform_set_drvdata(pdev
, host
);
1303 ret
= mmc_davinci_cpufreq_register(host
);
1305 dev_err(&pdev
->dev
, "failed to register cpufreq\n");
1309 ret
= mmc_add_host(mmc
);
1311 goto mmc_add_host_fail
;
1313 ret
= devm_request_irq(&pdev
->dev
, irq
, mmc_davinci_irq
, 0,
1314 mmc_hostname(mmc
), host
);
1316 goto request_irq_fail
;
1318 if (host
->sdio_irq
>= 0) {
1319 ret
= devm_request_irq(&pdev
->dev
, host
->sdio_irq
,
1320 mmc_davinci_sdio_irq
, 0,
1321 mmc_hostname(mmc
), host
);
1323 mmc
->caps
|= MMC_CAP_SDIO_IRQ
;
1326 rename_region(mem
, mmc_hostname(mmc
));
1328 dev_info(mmc_dev(host
->mmc
), "Using %s, %d-bit mode\n",
1329 host
->use_dma
? "DMA" : "PIO",
1330 (mmc
->caps
& MMC_CAP_4_BIT_DATA
) ? 4 : 1);
1335 mmc_remove_host(mmc
);
1337 mmc_davinci_cpufreq_deregister(host
);
1339 davinci_release_dma_channels(host
);
1342 clk_disable_unprepare(host
->clk
);
1343 clk_prepare_enable_fail
:
1351 static int __exit
davinci_mmcsd_remove(struct platform_device
*pdev
)
1353 struct mmc_davinci_host
*host
= platform_get_drvdata(pdev
);
1355 mmc_remove_host(host
->mmc
);
1356 mmc_davinci_cpufreq_deregister(host
);
1357 davinci_release_dma_channels(host
);
1358 clk_disable_unprepare(host
->clk
);
1359 mmc_free_host(host
->mmc
);
1365 static int davinci_mmcsd_suspend(struct device
*dev
)
1367 struct mmc_davinci_host
*host
= dev_get_drvdata(dev
);
1369 writel(0, host
->base
+ DAVINCI_MMCIM
);
1370 mmc_davinci_reset_ctrl(host
, 1);
1371 clk_disable(host
->clk
);
1376 static int davinci_mmcsd_resume(struct device
*dev
)
1378 struct mmc_davinci_host
*host
= dev_get_drvdata(dev
);
1380 clk_enable(host
->clk
);
1381 mmc_davinci_reset_ctrl(host
, 0);
1386 static const struct dev_pm_ops davinci_mmcsd_pm
= {
1387 .suspend
= davinci_mmcsd_suspend
,
1388 .resume
= davinci_mmcsd_resume
,
1391 #define davinci_mmcsd_pm_ops (&davinci_mmcsd_pm)
1393 #define davinci_mmcsd_pm_ops NULL
1396 static struct platform_driver davinci_mmcsd_driver
= {
1398 .name
= "davinci_mmc",
1399 .pm
= davinci_mmcsd_pm_ops
,
1400 .of_match_table
= davinci_mmc_dt_ids
,
1402 .probe
= davinci_mmcsd_probe
,
1403 .remove
= __exit_p(davinci_mmcsd_remove
),
1404 .id_table
= davinci_mmc_devtype
,
1407 module_platform_driver(davinci_mmcsd_driver
);
1409 MODULE_AUTHOR("Texas Instruments India");
1410 MODULE_LICENSE("GPL");
1411 MODULE_DESCRIPTION("MMC/SD driver for Davinci MMC controller");
1412 MODULE_ALIAS("platform:davinci_mmc");