?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / net / ethernet / dec / tulip / eeprom.c
blobba0a69b363f83767838666c82d0131a7bcae658c
1 /*
2 drivers/net/ethernet/dec/tulip/eeprom.c
3
4 Copyright 2000,2001 The Linux Kernel Team
5 Written/copyright 1994-2001 by Donald Becker.
6
7 This software may be used and distributed according to the terms
8 of the GNU General Public License, incorporated herein by reference.
9
10 Please submit bug reports to http://bugzilla.kernel.org/.
11 */
12
13 #include <linux/pci.h>
14 #include <linux/slab.h>
15 #include "tulip.h"
16 #include <asm/unaligned.h>
17
18
19
20 /* Serial EEPROM section. */
21 /* The main routine to parse the very complicated SROM structure.
22 Search www.digital.com for "21X4 SROM" to get details.
23 This code is very complex, and will require changes to support
24 additional cards, so I'll be verbose about what is going on.
25 */
26
27 /* Known cards that have old-style EEPROMs. */
28 static struct eeprom_fixup eeprom_fixups[] = {
29 {"Asante", 0, 0, 0x94, {0x1e00, 0x0000, 0x0800, 0x0100, 0x018c,
30 0x0000, 0x0000, 0xe078, 0x0001, 0x0050, 0x0018 }},
31 {"SMC9332DST", 0, 0, 0xC0, { 0x1e00, 0x0000, 0x0800, 0x041f,
32 0x0000, 0x009E, /* 10baseT */
33 0x0004, 0x009E, /* 10baseT-FD */
34 0x0903, 0x006D, /* 100baseTx */
35 0x0905, 0x006D, /* 100baseTx-FD */ }},
36 {"Cogent EM100", 0, 0, 0x92, { 0x1e00, 0x0000, 0x0800, 0x063f,
37 0x0107, 0x8021, /* 100baseFx */
38 0x0108, 0x8021, /* 100baseFx-FD */
39 0x0100, 0x009E, /* 10baseT */
40 0x0104, 0x009E, /* 10baseT-FD */
41 0x0103, 0x006D, /* 100baseTx */
42 0x0105, 0x006D, /* 100baseTx-FD */ }},
43 {"Maxtech NX-110", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x0513,
44 0x1001, 0x009E, /* 10base2, CSR12 0x10*/
45 0x0000, 0x009E, /* 10baseT */
46 0x0004, 0x009E, /* 10baseT-FD */
47 0x0303, 0x006D, /* 100baseTx, CSR12 0x03 */
48 0x0305, 0x006D, /* 100baseTx-FD CSR12 0x03 */}},
49 {"Accton EN1207", 0, 0, 0xE8, { 0x1e00, 0x0000, 0x0800, 0x051F,
50 0x1B01, 0x0000, /* 10base2, CSR12 0x1B */
51 0x0B00, 0x009E, /* 10baseT, CSR12 0x0B */
52 0x0B04, 0x009E, /* 10baseT-FD,CSR12 0x0B */
53 0x1B03, 0x006D, /* 100baseTx, CSR12 0x1B */
54 0x1B05, 0x006D, /* 100baseTx-FD CSR12 0x1B */
55 }},
56 {"NetWinder", 0x00, 0x10, 0x57,
57 /* Default media = MII
58 * MII block, reset sequence (3) = 0x0821 0x0000 0x0001, capabilities 0x01e1
59 */
60 { 0x1e00, 0x0000, 0x000b, 0x8f01, 0x0103, 0x0300, 0x0821, 0x000, 0x0001, 0x0000, 0x01e1 }
61 },
62 {"Cobalt Microserver", 0, 0x10, 0xE0, {0x1e00, /* 0 == controller #, 1e == offset */
63 0x0000, /* 0 == high offset, 0 == gap */
64 0x0800, /* Default Autoselect */
65 0x8001, /* 1 leaf, extended type, bogus len */
66 0x0003, /* Type 3 (MII), PHY #0 */
67 0x0400, /* 0 init instr, 4 reset instr */
68 0x0801, /* Set control mode, GP0 output */
69 0x0000, /* Drive GP0 Low (RST is active low) */
70 0x0800, /* control mode, GP0 input (undriven) */
71 0x0000, /* clear control mode */
72 0x7800, /* 100TX FDX + HDX, 10bT FDX + HDX */
73 0x01e0, /* Advertise all above */
74 0x5000, /* FDX all above */
75 0x1800, /* Set fast TTM in 100bt modes */
76 0x0000, /* PHY cannot be unplugged */
77 }},
78 {NULL}};
79
80
81 static const char *const block_name[] = {
82 "21140 non-MII",
83 "21140 MII PHY",
84 "21142 Serial PHY",
85 "21142 MII PHY",
86 "21143 SYM PHY",
87 "21143 reset method"
88 };
89
90
91 /**
92 * tulip_build_fake_mediatable - Build a fake mediatable entry.
93 * @tp: Ptr to the tulip private data.
94 *
95 * Some cards like the 3x5 HSC cards (J3514A) do not have a standard
96 * srom and can not be handled under the fixup routine. These cards
97 * still need a valid mediatable entry for correct csr12 setup and
98 * mii handling.
99 *
100 * Since this is currently a parisc-linux specific function, the
101 * #ifdef __hppa__ should completely optimize this function away for
102 * non-parisc hardware.
103 */
104 static void tulip_build_fake_mediatable(struct tulip_private *tp)
105 {
106 #ifdef CONFIG_GSC
107 if (tp->flags & NEEDS_FAKE_MEDIA_TABLE) {
108 static unsigned char leafdata[] =
109 { 0x01, /* phy number */
110 0x02, /* gpr setup sequence length */
111 0x02, 0x00, /* gpr setup sequence */
112 0x02, /* phy reset sequence length */
113 0x01, 0x00, /* phy reset sequence */
114 0x00, 0x78, /* media capabilities */
115 0x00, 0xe0, /* nway advertisement */
116 0x00, 0x05, /* fdx bit map */
117 0x00, 0x06 /* ttm bit map */
118 };
119
120 tp->mtable = kmalloc(sizeof(struct mediatable) +
121 sizeof(struct medialeaf), GFP_KERNEL);
122
123 if (tp->mtable == NULL)
124 return; /* Horrible, impossible failure. */
125
126 tp->mtable->defaultmedia = 0x800;
127 tp->mtable->leafcount = 1;
128 tp->mtable->csr12dir = 0x3f; /* inputs on bit7 for hsc-pci, bit6 for pci-fx */
129 tp->mtable->has_nonmii = 0;
130 tp->mtable->has_reset = 0;
131 tp->mtable->has_mii = 1;
132 tp->mtable->csr15dir = tp->mtable->csr15val = 0;
133 tp->mtable->mleaf[0].type = 1;
134 tp->mtable->mleaf[0].media = 11;
135 tp->mtable->mleaf[0].leafdata = &leafdata[0];
136 tp->flags |= HAS_PHY_IRQ;
137 tp->csr12_shadow = -1;
138 }
139 #endif
140 }
141
142 void tulip_parse_eeprom(struct net_device *dev)
143 {
144 /*
145 dev is not registered at this point, so logging messages can't
146 use dev_<level> or netdev_<level> but dev->name is good via a
147 hack in the caller
148 */
149
150 /* The last media info list parsed, for multiport boards. */
151 static struct mediatable *last_mediatable;
152 static unsigned char *last_ee_data;
153 static int controller_index;
154 struct tulip_private *tp = netdev_priv(dev);
155 unsigned char *ee_data = tp->eeprom;
156 int i;
157
158 tp->mtable = NULL;
159 /* Detect an old-style (SA only) EEPROM layout:
160 memcmp(eedata, eedata+16, 8). */
161 for (i = 0; i < 8; i ++)
162 if (ee_data[i] != ee_data[16+i])
163 break;
164 if (i >= 8) {
165 if (ee_data[0] == 0xff) {
166 if (last_mediatable) {
167 controller_index++;
168 pr_info("%s: Controller %d of multiport board\n",
169 dev->name, controller_index);
170 tp->mtable = last_mediatable;
171 ee_data = last_ee_data;
172 goto subsequent_board;
173 } else
174 pr_info("%s: Missing EEPROM, this interface may not work correctly!\n",
175 dev->name);
176 return;
177 }
178 /* Do a fix-up based on the vendor half of the station address prefix. */
179 for (i = 0; eeprom_fixups[i].name; i++) {
180 if (dev->dev_addr[0] == eeprom_fixups[i].addr0 &&
181 dev->dev_addr[1] == eeprom_fixups[i].addr1 &&
182 dev->dev_addr[2] == eeprom_fixups[i].addr2) {
183 if (dev->dev_addr[2] == 0xE8 && ee_data[0x1a] == 0x55)
184 i++; /* An Accton EN1207, not an outlaw Maxtech. */
185 memcpy(ee_data + 26, eeprom_fixups[i].newtable,
186 sizeof(eeprom_fixups[i].newtable));
187 pr_info("%s: Old format EEPROM on '%s' board. Using substitute media control info\n",
188 dev->name, eeprom_fixups[i].name);
189 break;
190 }
191 }
192 if (eeprom_fixups[i].name == NULL) { /* No fixup found. */
193 pr_info("%s: Old style EEPROM with no media selection information\n",
194 dev->name);
195 return;
196 }
197 }
198
199 controller_index = 0;
200 if (ee_data[19] > 1) { /* Multiport board. */
201 last_ee_data = ee_data;
202 }
203 subsequent_board:
204
205 if (ee_data[27] == 0) { /* No valid media table. */
206 tulip_build_fake_mediatable(tp);
207 } else {
208 unsigned char *p = (void *)ee_data + ee_data[27];
209 unsigned char csr12dir = 0;
210 int count, new_advertise = 0;
211 struct mediatable *mtable;
212 u16 media = get_u16(p);
213
214 p += 2;
215 if (tp->flags & CSR12_IN_SROM)
216 csr12dir = *p++;
217 count = *p++;
218
219 /* there is no phy information, don't even try to build mtable */
220 if (count == 0) {
221 if (tulip_debug > 0)
222 pr_warn("%s: no phy info, aborting mtable build\n",
223 dev->name);
224 return;
225 }
226
227 mtable = kmalloc(struct_size(mtable, mleaf, count), GFP_KERNEL);
228 if (mtable == NULL)
229 return; /* Horrible, impossible failure. */
230 last_mediatable = tp->mtable = mtable;
231 mtable->defaultmedia = media;
232 mtable->leafcount = count;
233 mtable->csr12dir = csr12dir;
234 mtable->has_nonmii = mtable->has_mii = mtable->has_reset = 0;
235 mtable->csr15dir = mtable->csr15val = 0;
236
237 pr_info("%s: EEPROM default media type %s\n",
238 dev->name,
239 media & 0x0800 ? "Autosense"
240 : medianame[media & MEDIA_MASK]);
241 for (i = 0; i < count; i++) {
242 struct medialeaf *leaf = &mtable->mleaf[i];
243
244 if ((p[0] & 0x80) == 0) { /* 21140 Compact block. */
245 leaf->type = 0;
246 leaf->media = p[0] & 0x3f;
247 leaf->leafdata = p;
248 if ((p[2] & 0x61) == 0x01) /* Bogus, but Znyx boards do it. */
249 mtable->has_mii = 1;
250 p += 4;
251 } else {
252 leaf->type = p[1];
253 if (p[1] == 0x05) {
254 mtable->has_reset = i;
255 leaf->media = p[2] & 0x0f;
256 } else if (tp->chip_id == DM910X && p[1] == 0x80) {
257 /* Hack to ignore Davicom delay period block */
258 mtable->leafcount--;
259 count--;
260 i--;
261 leaf->leafdata = p + 2;
262 p += (p[0] & 0x3f) + 1;
263 continue;
264 } else if (p[1] & 1) {
265 int gpr_len, reset_len;
266
267 mtable->has_mii = 1;
268 leaf->media = 11;
269 gpr_len=p[3]*2;
270 reset_len=p[4+gpr_len]*2;
271 new_advertise |= get_u16(&p[7+gpr_len+reset_len]);
272 } else {
273 mtable->has_nonmii = 1;
274 leaf->media = p[2] & MEDIA_MASK;
275 /* Davicom's media number for 100BaseTX is strange */
276 if (tp->chip_id == DM910X && leaf->media == 1)
277 leaf->media = 3;
278 switch (leaf->media) {
279 case 0: new_advertise |= 0x0020; break;
280 case 4: new_advertise |= 0x0040; break;
281 case 3: new_advertise |= 0x0080; break;
282 case 5: new_advertise |= 0x0100; break;
283 case 6: new_advertise |= 0x0200; break;
284 }
285 if (p[1] == 2 && leaf->media == 0) {
286 if (p[2] & 0x40) {
287 u32 base15 = get_unaligned((u16*)&p[7]);
288 mtable->csr15dir =
289 (get_unaligned((u16*)&p[9])<<16) + base15;
290 mtable->csr15val =
291 (get_unaligned((u16*)&p[11])<<16) + base15;
292 } else {
293 mtable->csr15dir = get_unaligned((u16*)&p[3])<<16;
294 mtable->csr15val = get_unaligned((u16*)&p[5])<<16;
295 }
296 }
297 }
298 leaf->leafdata = p + 2;
299 p += (p[0] & 0x3f) + 1;
300 }
301 if (tulip_debug > 1 && leaf->media == 11) {
302 unsigned char *bp = leaf->leafdata;
303 pr_info("%s: MII interface PHY %d, setup/reset sequences %d/%d long, capabilities %02x %02x\n",
304 dev->name,
305 bp[0], bp[1], bp[2 + bp[1]*2],
306 bp[5 + bp[2 + bp[1]*2]*2],
307 bp[4 + bp[2 + bp[1]*2]*2]);
308 }
309 pr_info("%s: Index #%d - Media %s (#%d) described by a %s (%d) block\n",
310 dev->name,
311 i, medianame[leaf->media & 15], leaf->media,
312 leaf->type < ARRAY_SIZE(block_name) ? block_name[leaf->type] : "<unknown>",
313 leaf->type);
314 }
315 if (new_advertise)
316 tp->sym_advertise = new_advertise;
317 }
318 }
319 /* Reading a serial EEPROM is a "bit" grungy, but we work our way through:->.*/
320
321 /* EEPROM_Ctrl bits. */
322 #define EE_SHIFT_CLK 0x02 /* EEPROM shift clock. */
323 #define EE_CS 0x01 /* EEPROM chip select. */
324 #define EE_DATA_WRITE 0x04 /* Data from the Tulip to EEPROM. */
325 #define EE_WRITE_0 0x01
326 #define EE_WRITE_1 0x05
327 #define EE_DATA_READ 0x08 /* Data from the EEPROM chip. */
328 #define EE_ENB (0x4800 | EE_CS)
329
330 /* Delay between EEPROM clock transitions.
331 Even at 33Mhz current PCI implementations don't overrun the EEPROM clock.
332 We add a bus turn-around to insure that this remains true. */
333 #define eeprom_delay() ioread32(ee_addr)
334
335 /* The EEPROM commands include the alway-set leading bit. */
336 #define EE_READ_CMD (6)
337
338 /* Note: this routine returns extra data bits for size detection. */
339 int tulip_read_eeprom(struct net_device *dev, int location, int addr_len)
340 {
341 int i;
342 unsigned retval = 0;
343 struct tulip_private *tp = netdev_priv(dev);
344 void __iomem *ee_addr = tp->base_addr + CSR9;
345 int read_cmd = location | (EE_READ_CMD << addr_len);
346
347 /* If location is past the end of what we can address, don't
348 * read some other location (ie truncate). Just return zero.
349 */
350 if (location > (1 << addr_len) - 1)
351 return 0;
352
353 iowrite32(EE_ENB & ~EE_CS, ee_addr);
354 iowrite32(EE_ENB, ee_addr);
355
356 /* Shift the read command bits out. */
357 for (i = 4 + addr_len; i >= 0; i--) {
358 short dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
359 iowrite32(EE_ENB | dataval, ee_addr);
360 eeprom_delay();
361 iowrite32(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
362 eeprom_delay();
363 retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0);
364 }
365 iowrite32(EE_ENB, ee_addr);
366 eeprom_delay();
367
368 for (i = 16; i > 0; i--) {
369 iowrite32(EE_ENB | EE_SHIFT_CLK, ee_addr);
370 eeprom_delay();
371 retval = (retval << 1) | ((ioread32(ee_addr) & EE_DATA_READ) ? 1 : 0);
372 iowrite32(EE_ENB, ee_addr);
373 eeprom_delay();
374 }
375
376 /* Terminate the EEPROM access. */
377 iowrite32(EE_ENB & ~EE_CS, ee_addr);
378 return (tp->flags & HAS_SWAPPED_SEEPROM) ? swab16(retval) : retval;
379 }
380
Linux with added FPC-III support