1 // SPDX-License-Identifier: GPL-2.0-only
2 /* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
5 /* Qualcomm Technologies, Inc. QDF2400 EMAC SGMII Controller driver.
8 #include <linux/iopoll.h>
11 /* EMAC_SGMII register offsets */
12 #define EMAC_SGMII_PHY_TX_PWR_CTRL 0x000C
13 #define EMAC_SGMII_PHY_LANE_CTRL1 0x0018
14 #define EMAC_SGMII_PHY_CDR_CTRL0 0x0058
15 #define EMAC_SGMII_PHY_POW_DWN_CTRL0 0x0080
16 #define EMAC_SGMII_PHY_RESET_CTRL 0x00a8
17 #define EMAC_SGMII_PHY_INTERRUPT_MASK 0x00b4
19 /* SGMII digital lane registers */
20 #define EMAC_SGMII_LN_DRVR_CTRL0 0x000C
21 #define EMAC_SGMII_LN_DRVR_CTRL1 0x0010
22 #define EMAC_SGMII_LN_DRVR_TAP_EN 0x0018
23 #define EMAC_SGMII_LN_TX_MARGINING 0x001C
24 #define EMAC_SGMII_LN_TX_PRE 0x0020
25 #define EMAC_SGMII_LN_TX_POST 0x0024
26 #define EMAC_SGMII_LN_TX_BAND_MODE 0x0060
27 #define EMAC_SGMII_LN_LANE_MODE 0x0064
28 #define EMAC_SGMII_LN_PARALLEL_RATE 0x007C
29 #define EMAC_SGMII_LN_CML_CTRL_MODE0 0x00C0
30 #define EMAC_SGMII_LN_MIXER_CTRL_MODE0 0x00D8
31 #define EMAC_SGMII_LN_VGA_INITVAL 0x013C
32 #define EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0 0x0184
33 #define EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0 0x0190
34 #define EMAC_SGMII_LN_UCDR_SO_CONFIG 0x019C
35 #define EMAC_SGMII_LN_RX_BAND 0x01A4
36 #define EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0 0x01C0
37 #define EMAC_SGMII_LN_RSM_CONFIG 0x01F8
38 #define EMAC_SGMII_LN_SIGDET_ENABLES 0x0230
39 #define EMAC_SGMII_LN_SIGDET_CNTRL 0x0234
40 #define EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL 0x0238
41 #define EMAC_SGMII_LN_RX_EN_SIGNAL 0x02AC
42 #define EMAC_SGMII_LN_RX_MISC_CNTRL0 0x02B8
43 #define EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV 0x02C8
44 #define EMAC_SGMII_LN_RX_RESECODE_OFFSET 0x02CC
46 /* SGMII digital lane register values */
47 #define UCDR_STEP_BY_TWO_MODE0 BIT(7)
48 #define UCDR_xO_GAIN_MODE(x) ((x) & 0x7f)
49 #define UCDR_ENABLE BIT(6)
50 #define UCDR_SO_SATURATION(x) ((x) & 0x3f)
52 #define SIGDET_LP_BYP_PS4 BIT(7)
53 #define SIGDET_EN_PS0_TO_PS2 BIT(6)
55 #define TXVAL_VALID_INIT BIT(4)
56 #define KR_PCIGEN3_MODE BIT(0)
58 #define MAIN_EN BIT(0)
60 #define TX_MARGINING_MUX BIT(6)
61 #define TX_MARGINING(x) ((x) & 0x3f)
63 #define TX_PRE_MUX BIT(6)
65 #define TX_POST_MUX BIT(6)
67 #define CML_GEAR_MODE(x) (((x) & 7) << 3)
68 #define CML2CMOS_IBOOST_MODE(x) ((x) & 7)
70 #define RESCODE_OFFSET(x) ((x) & 0x1f)
72 #define MIXER_LOADB_MODE(x) (((x) & 0xf) << 2)
73 #define MIXER_DATARATE_MODE(x) ((x) & 3)
75 #define VGA_THRESH_DFE(x) ((x) & 0x3f)
77 #define SIGDET_LP_BYP_PS0_TO_PS2 BIT(5)
78 #define SIGDET_FLT_BYP BIT(0)
80 #define SIGDET_LVL(x) (((x) & 0xf) << 4)
82 #define SIGDET_DEGLITCH_CTRL(x) (((x) & 0xf) << 1)
84 #define INVERT_PCS_RX_CLK BIT(7)
86 #define DRVR_LOGIC_CLK_EN BIT(4)
87 #define DRVR_LOGIC_CLK_DIV(x) ((x) & 0xf)
89 #define PARALLEL_RATE_MODE0(x) ((x) & 0x3)
91 #define BAND_MODE0(x) ((x) & 0x3)
93 #define LANE_MODE(x) ((x) & 0x1f)
95 #define CDR_PD_SEL_MODE0(x) (((x) & 0x3) << 5)
96 #define EN_DLL_MODE0 BIT(4)
97 #define EN_IQ_DCC_MODE0 BIT(3)
98 #define EN_IQCAL_MODE0 BIT(2)
100 #define BYPASS_RSM_SAMP_CAL BIT(1)
101 #define BYPASS_RSM_DLL_CAL BIT(0)
103 #define L0_RX_EQUALIZE_ENABLE BIT(6)
105 #define PWRDN_B BIT(0)
107 #define CDR_MAX_CNT(x) ((x) & 0xff)
109 #define SERDES_START_WAIT_TIMES 100
111 struct emac_reg_write
{
116 static void emac_reg_write_all(void __iomem
*base
,
117 const struct emac_reg_write
*itr
, size_t size
)
121 for (i
= 0; i
< size
; ++itr
, ++i
)
122 writel(itr
->val
, base
+ itr
->offset
);
125 static const struct emac_reg_write sgmii_laned
[] = {
127 {EMAC_SGMII_LN_UCDR_FO_GAIN_MODE0
,
128 UCDR_STEP_BY_TWO_MODE0
| UCDR_xO_GAIN_MODE(10)},
129 {EMAC_SGMII_LN_UCDR_SO_GAIN_MODE0
, UCDR_xO_GAIN_MODE(0)},
130 {EMAC_SGMII_LN_UCDR_SO_CONFIG
, UCDR_ENABLE
| UCDR_SO_SATURATION(12)},
133 {EMAC_SGMII_LN_RX_EN_SIGNAL
, SIGDET_LP_BYP_PS4
| SIGDET_EN_PS0_TO_PS2
},
135 {EMAC_SGMII_LN_DRVR_CTRL0
, TXVAL_VALID_INIT
| KR_PCIGEN3_MODE
},
136 {EMAC_SGMII_LN_DRVR_TAP_EN
, MAIN_EN
},
137 {EMAC_SGMII_LN_TX_MARGINING
, TX_MARGINING_MUX
| TX_MARGINING(25)},
138 {EMAC_SGMII_LN_TX_PRE
, TX_PRE_MUX
},
139 {EMAC_SGMII_LN_TX_POST
, TX_POST_MUX
},
141 {EMAC_SGMII_LN_CML_CTRL_MODE0
,
142 CML_GEAR_MODE(1) | CML2CMOS_IBOOST_MODE(1)},
143 {EMAC_SGMII_LN_MIXER_CTRL_MODE0
,
144 MIXER_LOADB_MODE(12) | MIXER_DATARATE_MODE(1)},
145 {EMAC_SGMII_LN_VGA_INITVAL
, VGA_THRESH_DFE(31)},
146 {EMAC_SGMII_LN_SIGDET_ENABLES
,
147 SIGDET_LP_BYP_PS0_TO_PS2
| SIGDET_FLT_BYP
},
148 {EMAC_SGMII_LN_SIGDET_CNTRL
, SIGDET_LVL(8)},
150 {EMAC_SGMII_LN_SIGDET_DEGLITCH_CNTRL
, SIGDET_DEGLITCH_CTRL(4)},
151 {EMAC_SGMII_LN_RX_MISC_CNTRL0
, INVERT_PCS_RX_CLK
},
152 {EMAC_SGMII_LN_DRVR_LOGIC_CLKDIV
,
153 DRVR_LOGIC_CLK_EN
| DRVR_LOGIC_CLK_DIV(4)},
155 {EMAC_SGMII_LN_PARALLEL_RATE
, PARALLEL_RATE_MODE0(1)},
156 {EMAC_SGMII_LN_TX_BAND_MODE
, BAND_MODE0(1)},
157 {EMAC_SGMII_LN_RX_BAND
, BAND_MODE0(2)},
158 {EMAC_SGMII_LN_DRVR_CTRL1
, RESCODE_OFFSET(7)},
159 {EMAC_SGMII_LN_RX_RESECODE_OFFSET
, RESCODE_OFFSET(9)},
160 {EMAC_SGMII_LN_LANE_MODE
, LANE_MODE(26)},
161 {EMAC_SGMII_LN_RX_RCVR_PATH1_MODE0
, CDR_PD_SEL_MODE0(2) |
162 EN_DLL_MODE0
| EN_IQ_DCC_MODE0
| EN_IQCAL_MODE0
},
163 {EMAC_SGMII_LN_RSM_CONFIG
, BYPASS_RSM_SAMP_CAL
| BYPASS_RSM_DLL_CAL
},
166 static const struct emac_reg_write physical_coding_sublayer_programming
[] = {
167 {EMAC_SGMII_PHY_POW_DWN_CTRL0
, PWRDN_B
},
168 {EMAC_SGMII_PHY_CDR_CTRL0
, CDR_MAX_CNT(15)},
169 {EMAC_SGMII_PHY_TX_PWR_CTRL
, 0},
170 {EMAC_SGMII_PHY_LANE_CTRL1
, L0_RX_EQUALIZE_ENABLE
},
173 int emac_sgmii_init_qdf2400(struct emac_adapter
*adpt
)
175 struct emac_sgmii
*phy
= &adpt
->phy
;
176 void __iomem
*phy_regs
= phy
->base
;
177 void __iomem
*laned
= phy
->digital
;
181 /* PCS lane-x init */
182 emac_reg_write_all(phy
->base
, physical_coding_sublayer_programming
,
183 ARRAY_SIZE(physical_coding_sublayer_programming
));
185 /* SGMII lane-x init */
186 emac_reg_write_all(phy
->digital
, sgmii_laned
, ARRAY_SIZE(sgmii_laned
));
188 /* Power up PCS and start reset lane state machine */
190 writel(0, phy_regs
+ EMAC_SGMII_PHY_RESET_CTRL
);
191 writel(1, laned
+ SGMII_LN_RSM_START
);
193 /* Wait for c_ready assertion */
194 for (i
= 0; i
< SERDES_START_WAIT_TIMES
; i
++) {
195 lnstatus
= readl(phy_regs
+ SGMII_PHY_LN_LANE_STATUS
);
196 if (lnstatus
& BIT(1))
198 usleep_range(100, 200);
201 if (i
== SERDES_START_WAIT_TIMES
) {
202 netdev_err(adpt
->netdev
, "SGMII failed to start\n");
206 /* Disable digital and SERDES loopback */
207 writel(0, phy_regs
+ SGMII_PHY_LN_BIST_GEN0
);
208 writel(0, phy_regs
+ SGMII_PHY_LN_BIST_GEN2
);
209 writel(0, phy_regs
+ SGMII_PHY_LN_CDR_CTRL1
);
211 /* Mask out all the SGMII Interrupt */
212 writel(0, phy_regs
+ EMAC_SGMII_PHY_INTERRUPT_MASK
);