drivers/net/ethernet/stmicro/stmmac/dwmac1000.h

   1 /* SPDX-License-Identifier: GPL-2.0-only */
   2 /*******************************************************************************
   3   Copyright (C) 2007-2009  STMicroelectronics Ltd
   4
   5
   6   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
   7 *******************************************************************************/
   8 #ifndef __DWMAC1000_H__
   9 #define __DWMAC1000_H__
  10
  11 #include <linux/phy.h>
  12 #include "common.h"
  13
  14 #define GMAC_CONTROL            0x00000000      /* Configuration */
  15 #define GMAC_FRAME_FILTER       0x00000004      /* Frame Filter */
  16 #define GMAC_HASH_HIGH          0x00000008      /* Multicast Hash Table High */
  17 #define GMAC_HASH_LOW           0x0000000c      /* Multicast Hash Table Low */
  18 #define GMAC_MII_ADDR           0x00000010      /* MII Address */
  19 #define GMAC_MII_DATA           0x00000014      /* MII Data */
  20 #define GMAC_FLOW_CTRL          0x00000018      /* Flow Control */
  21 #define GMAC_VLAN_TAG           0x0000001c      /* VLAN Tag */
  22 #define GMAC_DEBUG              0x00000024      /* GMAC debug register */
  23 #define GMAC_WAKEUP_FILTER      0x00000028      /* Wake-up Frame Filter */
  24
  25 #define GMAC_INT_STATUS         0x00000038      /* interrupt status register */
  26 #define GMAC_INT_STATUS_PMT     BIT(3)
  27 #define GMAC_INT_STATUS_MMCIS   BIT(4)
  28 #define GMAC_INT_STATUS_MMCRIS  BIT(5)
  29 #define GMAC_INT_STATUS_MMCTIS  BIT(6)
  30 #define GMAC_INT_STATUS_MMCCSUM BIT(7)
  31 #define GMAC_INT_STATUS_TSTAMP  BIT(9)
  32 #define GMAC_INT_STATUS_LPIIS   BIT(10)
  33
  34 /* interrupt mask register */
  35 #define GMAC_INT_MASK           0x0000003c
  36 #define GMAC_INT_DISABLE_RGMII          BIT(0)
  37 #define GMAC_INT_DISABLE_PCSLINK        BIT(1)
  38 #define GMAC_INT_DISABLE_PCSAN          BIT(2)
  39 #define GMAC_INT_DISABLE_PMT            BIT(3)
  40 #define GMAC_INT_DISABLE_TIMESTAMP      BIT(9)
  41 #define GMAC_INT_DISABLE_PCS    (GMAC_INT_DISABLE_RGMII | \
  42                                  GMAC_INT_DISABLE_PCSLINK | \
  43                                  GMAC_INT_DISABLE_PCSAN)
  44 #define GMAC_INT_DEFAULT_MASK   (GMAC_INT_DISABLE_TIMESTAMP | \
  45                                  GMAC_INT_DISABLE_PCS)
  46
  47 /* PMT Control and Status */
  48 #define GMAC_PMT                0x0000002c
  49 enum power_event {
  50         pointer_reset = 0x80000000,
  51         global_unicast = 0x00000200,
  52         wake_up_rx_frame = 0x00000040,
  53         magic_frame = 0x00000020,
  54         wake_up_frame_en = 0x00000004,
  55         magic_pkt_en = 0x00000002,
  56         power_down = 0x00000001,
  57 };
  58
  59 /* Energy Efficient Ethernet (EEE)
  60  *
  61  * LPI status, timer and control register offset
  62  */
  63 #define LPI_CTRL_STATUS 0x0030
  64 #define LPI_TIMER_CTRL  0x0034
  65
  66 /* LPI control and status defines */
  67 #define LPI_CTRL_STATUS_LPITXA  0x00080000      /* Enable LPI TX Automate */
  68 #define LPI_CTRL_STATUS_PLSEN   0x00040000      /* Enable PHY Link Status */
  69 #define LPI_CTRL_STATUS_PLS     0x00020000      /* PHY Link Status */
  70 #define LPI_CTRL_STATUS_LPIEN   0x00010000      /* LPI Enable */
  71 #define LPI_CTRL_STATUS_RLPIST  0x00000200      /* Receive LPI state */
  72 #define LPI_CTRL_STATUS_TLPIST  0x00000100      /* Transmit LPI state */
  73 #define LPI_CTRL_STATUS_RLPIEX  0x00000008      /* Receive LPI Exit */
  74 #define LPI_CTRL_STATUS_RLPIEN  0x00000004      /* Receive LPI Entry */
  75 #define LPI_CTRL_STATUS_TLPIEX  0x00000002      /* Transmit LPI Exit */
  76 #define LPI_CTRL_STATUS_TLPIEN  0x00000001      /* Transmit LPI Entry */
  77
  78 /* GMAC HW ADDR regs */
  79 #define GMAC_ADDR_HIGH(reg)     (((reg > 15) ? 0x00000800 : 0x00000040) + \
  80                                 (reg * 8))
  81 #define GMAC_ADDR_LOW(reg)      (((reg > 15) ? 0x00000804 : 0x00000044) + \
  82                                 (reg * 8))
  83 #define GMAC_MAX_PERFECT_ADDRESSES      1
  84
  85 #define GMAC_PCS_BASE           0x000000c0      /* PCS register base */
  86 #define GMAC_RGSMIIIS           0x000000d8      /* RGMII/SMII status */
  87
  88 /* SGMII/RGMII status register */
  89 #define GMAC_RGSMIIIS_LNKMODE           BIT(0)
  90 #define GMAC_RGSMIIIS_SPEED             GENMASK(2, 1)
  91 #define GMAC_RGSMIIIS_SPEED_SHIFT       1
  92 #define GMAC_RGSMIIIS_LNKSTS            BIT(3)
  93 #define GMAC_RGSMIIIS_JABTO             BIT(4)
  94 #define GMAC_RGSMIIIS_FALSECARDET       BIT(5)
  95 #define GMAC_RGSMIIIS_SMIDRXS           BIT(16)
  96 /* LNKMOD */
  97 #define GMAC_RGSMIIIS_LNKMOD_MASK       0x1
  98 /* LNKSPEED */
  99 #define GMAC_RGSMIIIS_SPEED_125         0x2
 100 #define GMAC_RGSMIIIS_SPEED_25          0x1
 101 #define GMAC_RGSMIIIS_SPEED_2_5         0x0
 102
 103 /* GMAC Configuration defines */
 104 #define GMAC_CONTROL_2K 0x08000000      /* IEEE 802.3as 2K packets */
 105 #define GMAC_CONTROL_TC 0x01000000      /* Transmit Conf. in RGMII/SGMII */
 106 #define GMAC_CONTROL_WD 0x00800000      /* Disable Watchdog on receive */
 107 #define GMAC_CONTROL_JD 0x00400000      /* Jabber disable */
 108 #define GMAC_CONTROL_BE 0x00200000      /* Frame Burst Enable */
 109 #define GMAC_CONTROL_JE 0x00100000      /* Jumbo frame */
 110 enum inter_frame_gap {
 111         GMAC_CONTROL_IFG_88 = 0x00040000,
 112         GMAC_CONTROL_IFG_80 = 0x00020000,
 113         GMAC_CONTROL_IFG_40 = 0x000e0000,
 114 };
 115 #define GMAC_CONTROL_DCRS       0x00010000      /* Disable carrier sense */
 116 #define GMAC_CONTROL_PS         0x00008000      /* Port Select 0:GMI 1:MII */
 117 #define GMAC_CONTROL_FES        0x00004000      /* Speed 0:10 1:100 */
 118 #define GMAC_CONTROL_DO         0x00002000      /* Disable Rx Own */
 119 #define GMAC_CONTROL_LM         0x00001000      /* Loop-back mode */
 120 #define GMAC_CONTROL_DM         0x00000800      /* Duplex Mode */
 121 #define GMAC_CONTROL_IPC        0x00000400      /* Checksum Offload */
 122 #define GMAC_CONTROL_DR         0x00000200      /* Disable Retry */
 123 #define GMAC_CONTROL_LUD        0x00000100      /* Link up/down */
 124 #define GMAC_CONTROL_ACS        0x00000080      /* Auto Pad/FCS Stripping */
 125 #define GMAC_CONTROL_DC         0x00000010      /* Deferral Check */
 126 #define GMAC_CONTROL_TE         0x00000008      /* Transmitter Enable */
 127 #define GMAC_CONTROL_RE         0x00000004      /* Receiver Enable */
 128
 129 #define GMAC_CORE_INIT (GMAC_CONTROL_JD | GMAC_CONTROL_PS | GMAC_CONTROL_ACS | \
 130                         GMAC_CONTROL_BE | GMAC_CONTROL_DCRS)
 131
 132 /* GMAC Frame Filter defines */
 133 #define GMAC_FRAME_FILTER_PR    0x00000001      /* Promiscuous Mode */
 134 #define GMAC_FRAME_FILTER_HUC   0x00000002      /* Hash Unicast */
 135 #define GMAC_FRAME_FILTER_HMC   0x00000004      /* Hash Multicast */
 136 #define GMAC_FRAME_FILTER_DAIF  0x00000008      /* DA Inverse Filtering */
 137 #define GMAC_FRAME_FILTER_PM    0x00000010      /* Pass all multicast */
 138 #define GMAC_FRAME_FILTER_DBF   0x00000020      /* Disable Broadcast frames */
 139 #define GMAC_FRAME_FILTER_PCF   0x00000080      /* Pass Control frames */
 140 #define GMAC_FRAME_FILTER_SAIF  0x00000100      /* Inverse Filtering */
 141 #define GMAC_FRAME_FILTER_SAF   0x00000200      /* Source Address Filter */
 142 #define GMAC_FRAME_FILTER_HPF   0x00000400      /* Hash or perfect Filter */
 143 #define GMAC_FRAME_FILTER_RA    0x80000000      /* Receive all mode */
 144 /* GMII ADDR  defines */
 145 #define GMAC_MII_ADDR_WRITE     0x00000002      /* MII Write */
 146 #define GMAC_MII_ADDR_BUSY      0x00000001      /* MII Busy */
 147 /* GMAC FLOW CTRL defines */
 148 #define GMAC_FLOW_CTRL_PT_MASK  0xffff0000      /* Pause Time Mask */
 149 #define GMAC_FLOW_CTRL_PT_SHIFT 16
 150 #define GMAC_FLOW_CTRL_UP       0x00000008      /* Unicast pause frame enable */
 151 #define GMAC_FLOW_CTRL_RFE      0x00000004      /* Rx Flow Control Enable */
 152 #define GMAC_FLOW_CTRL_TFE      0x00000002      /* Tx Flow Control Enable */
 153 #define GMAC_FLOW_CTRL_FCB_BPA  0x00000001      /* Flow Control Busy ... */
 154
 155 /* DEBUG Register defines */
 156 /* MTL TxStatus FIFO */
 157 #define GMAC_DEBUG_TXSTSFSTS    BIT(25) /* MTL TxStatus FIFO Full Status */
 158 #define GMAC_DEBUG_TXFSTS       BIT(24) /* MTL Tx FIFO Not Empty Status */
 159 #define GMAC_DEBUG_TWCSTS       BIT(22) /* MTL Tx FIFO Write Controller */
 160 /* MTL Tx FIFO Read Controller Status */
 161 #define GMAC_DEBUG_TRCSTS_MASK  GENMASK(21, 20)
 162 #define GMAC_DEBUG_TRCSTS_SHIFT 20
 163 #define GMAC_DEBUG_TRCSTS_IDLE  0
 164 #define GMAC_DEBUG_TRCSTS_READ  1
 165 #define GMAC_DEBUG_TRCSTS_TXW   2
 166 #define GMAC_DEBUG_TRCSTS_WRITE 3
 167 #define GMAC_DEBUG_TXPAUSED     BIT(19) /* MAC Transmitter in PAUSE */
 168 /* MAC Transmit Frame Controller Status */
 169 #define GMAC_DEBUG_TFCSTS_MASK  GENMASK(18, 17)
 170 #define GMAC_DEBUG_TFCSTS_SHIFT 17
 171 #define GMAC_DEBUG_TFCSTS_IDLE  0
 172 #define GMAC_DEBUG_TFCSTS_WAIT  1
 173 #define GMAC_DEBUG_TFCSTS_GEN_PAUSE     2
 174 #define GMAC_DEBUG_TFCSTS_XFER  3
 175 /* MAC GMII or MII Transmit Protocol Engine Status */
 176 #define GMAC_DEBUG_TPESTS       BIT(16)
 177 #define GMAC_DEBUG_RXFSTS_MASK  GENMASK(9, 8) /* MTL Rx FIFO Fill-level */
 178 #define GMAC_DEBUG_RXFSTS_SHIFT 8
 179 #define GMAC_DEBUG_RXFSTS_EMPTY 0
 180 #define GMAC_DEBUG_RXFSTS_BT    1
 181 #define GMAC_DEBUG_RXFSTS_AT    2
 182 #define GMAC_DEBUG_RXFSTS_FULL  3
 183 #define GMAC_DEBUG_RRCSTS_MASK  GENMASK(6, 5) /* MTL Rx FIFO Read Controller */
 184 #define GMAC_DEBUG_RRCSTS_SHIFT 5
 185 #define GMAC_DEBUG_RRCSTS_IDLE  0
 186 #define GMAC_DEBUG_RRCSTS_RDATA 1
 187 #define GMAC_DEBUG_RRCSTS_RSTAT 2
 188 #define GMAC_DEBUG_RRCSTS_FLUSH 3
 189 #define GMAC_DEBUG_RWCSTS       BIT(4) /* MTL Rx FIFO Write Controller Active */
 190 /* MAC Receive Frame Controller FIFO Status */
 191 #define GMAC_DEBUG_RFCFCSTS_MASK        GENMASK(2, 1)
 192 #define GMAC_DEBUG_RFCFCSTS_SHIFT       1
 193 /* MAC GMII or MII Receive Protocol Engine Status */
 194 #define GMAC_DEBUG_RPESTS       BIT(0)
 195
 196 /*--- DMA BLOCK defines ---*/
 197 /* DMA Bus Mode register defines */
 198 #define DMA_BUS_MODE_DA         0x00000002      /* Arbitration scheme */
 199 #define DMA_BUS_MODE_DSL_MASK   0x0000007c      /* Descriptor Skip Length */
 200 #define DMA_BUS_MODE_DSL_SHIFT  2               /*   (in DWORDS)      */
 201 /* Programmable burst length (passed thorugh platform)*/
 202 #define DMA_BUS_MODE_PBL_MASK   0x00003f00      /* Programmable Burst Len */
 203 #define DMA_BUS_MODE_PBL_SHIFT  8
 204 #define DMA_BUS_MODE_ATDS       0x00000080      /* Alternate Descriptor Size */
 205
 206 enum rx_tx_priority_ratio {
 207         double_ratio = 0x00004000,      /* 2:1 */
 208         triple_ratio = 0x00008000,      /* 3:1 */
 209         quadruple_ratio = 0x0000c000,   /* 4:1 */
 210 };
 211
 212 #define DMA_BUS_MODE_FB         0x00010000      /* Fixed burst */
 213 #define DMA_BUS_MODE_MB         0x04000000      /* Mixed burst */
 214 #define DMA_BUS_MODE_RPBL_MASK  0x007e0000      /* Rx-Programmable Burst Len */
 215 #define DMA_BUS_MODE_RPBL_SHIFT 17
 216 #define DMA_BUS_MODE_USP        0x00800000
 217 #define DMA_BUS_MODE_MAXPBL     0x01000000
 218 #define DMA_BUS_MODE_AAL        0x02000000
 219
 220 /* DMA CRS Control and Status Register Mapping */
 221 #define DMA_HOST_TX_DESC          0x00001048    /* Current Host Tx descriptor */
 222 #define DMA_HOST_RX_DESC          0x0000104c    /* Current Host Rx descriptor */
 223 /*  DMA Bus Mode register defines */
 224 #define DMA_BUS_PR_RATIO_MASK     0x0000c000    /* Rx/Tx priority ratio */
 225 #define DMA_BUS_PR_RATIO_SHIFT    14
 226 #define DMA_BUS_FB                0x00010000    /* Fixed Burst */
 227
 228 /* DMA operation mode defines (start/stop tx/rx are placed in common header)*/
 229 /* Disable Drop TCP/IP csum error */
 230 #define DMA_CONTROL_DT          0x04000000
 231 #define DMA_CONTROL_RSF         0x02000000      /* Receive Store and Forward */
 232 #define DMA_CONTROL_DFF         0x01000000      /* Disaable flushing */
 233 /* Threshold for Activating the FC */
 234 enum rfa {
 235         act_full_minus_1 = 0x00800000,
 236         act_full_minus_2 = 0x00800200,
 237         act_full_minus_3 = 0x00800400,
 238         act_full_minus_4 = 0x00800600,
 239 };
 240 /* Threshold for Deactivating the FC */
 241 enum rfd {
 242         deac_full_minus_1 = 0x00400000,
 243         deac_full_minus_2 = 0x00400800,
 244         deac_full_minus_3 = 0x00401000,
 245         deac_full_minus_4 = 0x00401800,
 246 };
 247 #define DMA_CONTROL_TSF 0x00200000      /* Transmit  Store and Forward */
 248
 249 enum ttc_control {
 250         DMA_CONTROL_TTC_64 = 0x00000000,
 251         DMA_CONTROL_TTC_128 = 0x00004000,
 252         DMA_CONTROL_TTC_192 = 0x00008000,
 253         DMA_CONTROL_TTC_256 = 0x0000c000,
 254         DMA_CONTROL_TTC_40 = 0x00010000,
 255         DMA_CONTROL_TTC_32 = 0x00014000,
 256         DMA_CONTROL_TTC_24 = 0x00018000,
 257         DMA_CONTROL_TTC_16 = 0x0001c000,
 258 };
 259 #define DMA_CONTROL_TC_TX_MASK  0xfffe3fff
 260
 261 #define DMA_CONTROL_EFC         0x00000100
 262 #define DMA_CONTROL_FEF         0x00000080
 263 #define DMA_CONTROL_FUF         0x00000040
 264
 265 /* Receive flow control activation field
 266  * RFA field in DMA control register, bits 23,10:9
 267  */
 268 #define DMA_CONTROL_RFA_MASK    0x00800600
 269
 270 /* Receive flow control deactivation field
 271  * RFD field in DMA control register, bits 22,12:11
 272  */
 273 #define DMA_CONTROL_RFD_MASK    0x00401800
 274
 275 /* RFD and RFA fields are encoded as follows
 276  *
 277  *   Bit Field
 278  *   0,00 - Full minus 1KB (only valid when rxfifo >= 4KB and EFC enabled)
 279  *   0,01 - Full minus 2KB (only valid when rxfifo >= 4KB and EFC enabled)
 280  *   0,10 - Full minus 3KB (only valid when rxfifo >= 4KB and EFC enabled)
 281  *   0,11 - Full minus 4KB (only valid when rxfifo > 4KB and EFC enabled)
 282  *   1,00 - Full minus 5KB (only valid when rxfifo > 8KB and EFC enabled)
 283  *   1,01 - Full minus 6KB (only valid when rxfifo > 8KB and EFC enabled)
 284  *   1,10 - Full minus 7KB (only valid when rxfifo > 8KB and EFC enabled)
 285  *   1,11 - Reserved
 286  *
 287  * RFD should always be > RFA for a given FIFO size. RFD == RFA may work,
 288  * but packet throughput performance may not be as expected.
 289  *
 290  * Be sure that bit 3 in GMAC Register 6 is set for Unicast Pause frame
 291  * detection (IEEE Specification Requirement, Annex 31B, 31B.1, Pause
 292  * Description).
 293  *
 294  * Be sure that DZPA (bit 7 in Flow Control Register, GMAC Register 6),
 295  * is set to 0. This allows pause frames with a quanta of 0 to be sent
 296  * as an XOFF message to the link peer.
 297  */
 298
 299 #define RFA_FULL_MINUS_1K       0x00000000
 300 #define RFA_FULL_MINUS_2K       0x00000200
 301 #define RFA_FULL_MINUS_3K       0x00000400
 302 #define RFA_FULL_MINUS_4K       0x00000600
 303 #define RFA_FULL_MINUS_5K       0x00800000
 304 #define RFA_FULL_MINUS_6K       0x00800200
 305 #define RFA_FULL_MINUS_7K       0x00800400
 306
 307 #define RFD_FULL_MINUS_1K       0x00000000
 308 #define RFD_FULL_MINUS_2K       0x00000800
 309 #define RFD_FULL_MINUS_3K       0x00001000
 310 #define RFD_FULL_MINUS_4K       0x00001800
 311 #define RFD_FULL_MINUS_5K       0x00400000
 312 #define RFD_FULL_MINUS_6K       0x00400800
 313 #define RFD_FULL_MINUS_7K       0x00401000
 314
 315 enum rtc_control {
 316         DMA_CONTROL_RTC_64 = 0x00000000,
 317         DMA_CONTROL_RTC_32 = 0x00000008,
 318         DMA_CONTROL_RTC_96 = 0x00000010,
 319         DMA_CONTROL_RTC_128 = 0x00000018,
 320 };
 321 #define DMA_CONTROL_TC_RX_MASK  0xffffffe7
 322
 323 #define DMA_CONTROL_OSF 0x00000004      /* Operate on second frame */
 324
 325 /* MMC registers offset */
 326 #define GMAC_MMC_CTRL      0x100
 327 #define GMAC_MMC_RX_INTR   0x104
 328 #define GMAC_MMC_TX_INTR   0x108
 329 #define GMAC_MMC_RX_CSUM_OFFLOAD   0x208
 330 #define GMAC_EXTHASH_BASE  0x500
 331
 332 extern const struct stmmac_dma_ops dwmac1000_dma_ops;
 333 #endif /* __DWMAC1000_H__ */