drivers/net/ieee802154/atusb.h

   1 /* SPDX-License-Identifier: GPL-2.0-only */
   2 /*
   3  * atusb.h - Definitions shared between kernel and ATUSB firmware
   4  *
   5  * Written 2013 by Werner Almesberger <werner@almesberger.net>
   6  *
   7  * (at your option) any later version.
   8  *
   9  * This file should be identical for kernel and firmware.
  10  * Kernel: drivers/net/ieee802154/atusb.h
  11  * Firmware: ben-wpan/atusb/fw/include/atusb/atusb.h
  12  */
  13
  14 #ifndef _ATUSB_H
  15 #define _ATUSB_H
  16
  17 #define ATUSB_VENDOR_ID 0x20b7  /* Qi Hardware*/
  18 #define ATUSB_PRODUCT_ID 0x1540 /* 802.15.4, device 0 */
  19                                 /*     -- -         - */
  20
  21 #define ATUSB_BUILD_SIZE 256    /* maximum build version/date message length */
  22
  23 /* Commands to our device. Make sure this is synced with the firmware */
  24 enum atusb_requests {
  25         ATUSB_ID                        = 0x00, /* system status/control grp */
  26         ATUSB_BUILD,
  27         ATUSB_RESET,
  28         ATUSB_RF_RESET                  = 0x10, /* debug/test group */
  29         ATUSB_POLL_INT,
  30         ATUSB_TEST,                     /* atusb-sil only */
  31         ATUSB_TIMER,
  32         ATUSB_GPIO,
  33         ATUSB_SLP_TR,
  34         ATUSB_GPIO_CLEANUP,
  35         ATUSB_REG_WRITE                 = 0x20, /* transceiver group */
  36         ATUSB_REG_READ,
  37         ATUSB_BUF_WRITE,
  38         ATUSB_BUF_READ,
  39         ATUSB_SRAM_WRITE,
  40         ATUSB_SRAM_READ,
  41         ATUSB_SPI_WRITE                 = 0x30, /* SPI group */
  42         ATUSB_SPI_READ1,
  43         ATUSB_SPI_READ2,
  44         ATUSB_SPI_WRITE2_SYNC,
  45         ATUSB_RX_MODE                   = 0x40, /* HardMAC group */
  46         ATUSB_TX,
  47         ATUSB_EUI64_WRITE               = 0x50, /* Parameter in EEPROM grp */
  48         ATUSB_EUI64_READ,
  49 };
  50
  51 enum {
  52         ATUSB_HW_TYPE_100813,   /* 2010-08-13 */
  53         ATUSB_HW_TYPE_101216,   /* 2010-12-16 */
  54         ATUSB_HW_TYPE_110131,   /* 2011-01-31, ATmega32U2-based */
  55         ATUSB_HW_TYPE_RZUSB,    /* Atmel Raven USB dongle with at86rf230 */
  56         ATUSB_HW_TYPE_HULUSB,   /* Busware HUL USB dongle with at86rf212 */
  57 };
  58
  59 /*
  60  * Direction    bRequest                wValue          wIndex  wLength
  61  *
  62  * ->host       ATUSB_ID                -               -       3
  63  * ->host       ATUSB_BUILD             -               -       #bytes
  64  * host->       ATUSB_RESET             -               -       0
  65  *
  66  * host->       ATUSB_RF_RESET          -               -       0
  67  * ->host       ATUSB_POLL_INT          -               -       1
  68  * host->       ATUSB_TEST              -               -       0
  69  * ->host       ATUSB_TIMER             -               -       #bytes (6)
  70  * ->host       ATUSB_GPIO              dir+data        mask+p# 3
  71  * host->       ATUSB_SLP_TR            -               -       0
  72  * host->       ATUSB_GPIO_CLEANUP      -               -       0
  73  *
  74  * host->       ATUSB_REG_WRITE         value           addr    0
  75  * ->host       ATUSB_REG_READ          -               addr    1
  76  * host->       ATUSB_BUF_WRITE         -               -       #bytes
  77  * ->host       ATUSB_BUF_READ          -               -       #bytes
  78  * host->       ATUSB_SRAM_WRITE        -               addr    #bytes
  79  * ->host       ATUSB_SRAM_READ         -               addr    #bytes
  80  *
  81  * host->       ATUSB_SPI_WRITE         byte0           byte1   #bytes
  82  * ->host       ATUSB_SPI_READ1         byte0           -       #bytes
  83  * ->host       ATUSB_SPI_READ2         byte0           byte1   #bytes
  84  * ->host       ATUSB_SPI_WRITE2_SYNC   byte0           byte1   0/1
  85  *
  86  * host->       ATUSB_RX_MODE           on              -       0
  87  * host->       ATUSB_TX                flags           ack_seq #bytes
  88  * host->       ATUSB_EUI64_WRITE       -               -       #bytes (8)
  89  * ->host       ATUSB_EUI64_READ        -               -       #bytes (8)
  90  */
  91
  92 #define ATUSB_REQ_FROM_DEV      (USB_TYPE_VENDOR | USB_DIR_IN)
  93 #define ATUSB_REQ_TO_DEV        (USB_TYPE_VENDOR | USB_DIR_OUT)
  94
  95 #endif /* !_ATUSB_H */