drivers/net/phy/bcm87xx.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2011 - 2012 Cavium, Inc.
   4  */
   5
   6 #include <linux/module.h>
   7 #include <linux/phy.h>
   8 #include <linux/of.h>
   9
  10 #define PHY_ID_BCM8706  0x0143bdc1
  11 #define PHY_ID_BCM8727  0x0143bff0
  12
  13 #define BCM87XX_PMD_RX_SIGNAL_DETECT    (MII_ADDR_C45 | 0x1000a)
  14 #define BCM87XX_10GBASER_PCS_STATUS     (MII_ADDR_C45 | 0x30020)
  15 #define BCM87XX_XGXS_LANE_STATUS        (MII_ADDR_C45 | 0x40018)
  16
  17 #define BCM87XX_LASI_CONTROL (MII_ADDR_C45 | 0x39002)
  18 #define BCM87XX_LASI_STATUS (MII_ADDR_C45 | 0x39005)
  19
  20 #if IS_ENABLED(CONFIG_OF_MDIO)
  21 /* Set and/or override some configuration registers based on the
  22  * broadcom,c45-reg-init property stored in the of_node for the phydev.
  23  *
  24  * broadcom,c45-reg-init = <devid reg mask value>,...;
  25  *
  26  * There may be one or more sets of <devid reg mask value>:
  27  *
  28  * devid: which sub-device to use.
  29  * reg: the register.
  30  * mask: if non-zero, ANDed with existing register value.
  31  * value: ORed with the masked value and written to the regiser.
  32  *
  33  */
  34 static int bcm87xx_of_reg_init(struct phy_device *phydev)
  35 {
  36         const __be32 *paddr;
  37         const __be32 *paddr_end;
  38         int len, ret;
  39
  40         if (!phydev->mdio.dev.of_node)
  41                 return 0;
  42
  43         paddr = of_get_property(phydev->mdio.dev.of_node,
  44                                 "broadcom,c45-reg-init", &len);
  45         if (!paddr)
  46                 return 0;
  47
  48         paddr_end = paddr + (len /= sizeof(*paddr));
  49
  50         ret = 0;
  51
  52         while (paddr + 3 < paddr_end) {
  53                 u16 devid       = be32_to_cpup(paddr++);
  54                 u16 reg         = be32_to_cpup(paddr++);
  55                 u16 mask        = be32_to_cpup(paddr++);
  56                 u16 val_bits    = be32_to_cpup(paddr++);
  57                 int val;
  58                 u32 regnum = MII_ADDR_C45 | (devid << 16) | reg;
  59                 val = 0;
  60                 if (mask) {
  61                         val = phy_read(phydev, regnum);
  62                         if (val < 0) {
  63                                 ret = val;
  64                                 goto err;
  65                         }
  66                         val &= mask;
  67                 }
  68                 val |= val_bits;
  69
  70                 ret = phy_write(phydev, regnum, val);
  71                 if (ret < 0)
  72                         goto err;
  73         }
  74 err:
  75         return ret;
  76 }
  77 #else
  78 static int bcm87xx_of_reg_init(struct phy_device *phydev)
  79 {
  80         return 0;
  81 }
  82 #endif /* CONFIG_OF_MDIO */
  83
  84 static int bcm87xx_get_features(struct phy_device *phydev)
  85 {
  86         linkmode_set_bit(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT,
  87                          phydev->supported);
  88         return 0;
  89 }
  90
  91 static int bcm87xx_config_init(struct phy_device *phydev)
  92 {
  93         return bcm87xx_of_reg_init(phydev);
  94 }
  95
  96 static int bcm87xx_config_aneg(struct phy_device *phydev)
  97 {
  98         return -EINVAL;
  99 }
 100
 101 static int bcm87xx_read_status(struct phy_device *phydev)
 102 {
 103         int rx_signal_detect;
 104         int pcs_status;
 105         int xgxs_lane_status;
 106
 107         rx_signal_detect = phy_read(phydev, BCM87XX_PMD_RX_SIGNAL_DETECT);
 108         if (rx_signal_detect < 0)
 109                 return rx_signal_detect;
 110
 111         if ((rx_signal_detect & 1) == 0)
 112                 goto no_link;
 113
 114         pcs_status = phy_read(phydev, BCM87XX_10GBASER_PCS_STATUS);
 115         if (pcs_status < 0)
 116                 return pcs_status;
 117
 118         if ((pcs_status & 1) == 0)
 119                 goto no_link;
 120
 121         xgxs_lane_status = phy_read(phydev, BCM87XX_XGXS_LANE_STATUS);
 122         if (xgxs_lane_status < 0)
 123                 return xgxs_lane_status;
 124
 125         if ((xgxs_lane_status & 0x1000) == 0)
 126                 goto no_link;
 127
 128         phydev->speed = 10000;
 129         phydev->link = 1;
 130         phydev->duplex = 1;
 131         return 0;
 132
 133 no_link:
 134         phydev->link = 0;
 135         return 0;
 136 }
 137
 138 static int bcm87xx_config_intr(struct phy_device *phydev)
 139 {
 140         int reg, err;
 141
 142         reg = phy_read(phydev, BCM87XX_LASI_CONTROL);
 143
 144         if (reg < 0)
 145                 return reg;
 146
 147         if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
 148                 reg |= 1;
 149         else
 150                 reg &= ~1;
 151
 152         err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg);
 153         return err;
 154 }
 155
 156 static int bcm87xx_did_interrupt(struct phy_device *phydev)
 157 {
 158         int reg;
 159
 160         reg = phy_read(phydev, BCM87XX_LASI_STATUS);
 161
 162         if (reg < 0) {
 163                 phydev_err(phydev,
 164                            "Error: Read of BCM87XX_LASI_STATUS failed: %d\n",
 165                            reg);
 166                 return 0;
 167         }
 168         return (reg & 1) != 0;
 169 }
 170
 171 static int bcm87xx_ack_interrupt(struct phy_device *phydev)
 172 {
 173         /* Reading the LASI status clears it. */
 174         bcm87xx_did_interrupt(phydev);
 175         return 0;
 176 }
 177
 178 static int bcm8706_match_phy_device(struct phy_device *phydev)
 179 {
 180         return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8706;
 181 }
 182
 183 static int bcm8727_match_phy_device(struct phy_device *phydev)
 184 {
 185         return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8727;
 186 }
 187
 188 static struct phy_driver bcm87xx_driver[] = {
 189 {
 190         .phy_id         = PHY_ID_BCM8706,
 191         .phy_id_mask    = 0xffffffff,
 192         .name           = "Broadcom BCM8706",
 193         .get_features   = bcm87xx_get_features,
 194         .config_init    = bcm87xx_config_init,
 195         .config_aneg    = bcm87xx_config_aneg,
 196         .read_status    = bcm87xx_read_status,
 197         .ack_interrupt  = bcm87xx_ack_interrupt,
 198         .config_intr    = bcm87xx_config_intr,
 199         .did_interrupt  = bcm87xx_did_interrupt,
 200         .match_phy_device = bcm8706_match_phy_device,
 201 }, {
 202         .phy_id         = PHY_ID_BCM8727,
 203         .phy_id_mask    = 0xffffffff,
 204         .name           = "Broadcom BCM8727",
 205         .get_features   = bcm87xx_get_features,
 206         .config_init    = bcm87xx_config_init,
 207         .config_aneg    = bcm87xx_config_aneg,
 208         .read_status    = bcm87xx_read_status,
 209         .ack_interrupt  = bcm87xx_ack_interrupt,
 210         .config_intr    = bcm87xx_config_intr,
 211         .did_interrupt  = bcm87xx_did_interrupt,
 212         .match_phy_device = bcm8727_match_phy_device,
 213 } };
 214
 215 module_phy_driver(bcm87xx_driver);
 216
 217 MODULE_LICENSE("GPL v2");