1 // SPDX-License-Identifier: GPL-2.0+
5 * CORTINA is a registered trademark of Cortina Systems, Inc.
8 #include <linux/module.h>
11 #define PHY_ID_CS4340 0x13e51002
13 #define VILLA_GLOBAL_CHIP_ID_LSB 0x0
14 #define VILLA_GLOBAL_CHIP_ID_MSB 0x1
16 #define VILLA_GLOBAL_GPIO_1_INTS 0x017
18 static int cortina_read_reg(struct phy_device
*phydev
, u16 regnum
)
20 return mdiobus_read(phydev
->mdio
.bus
, phydev
->mdio
.addr
,
21 MII_ADDR_C45
| regnum
);
24 static int cortina_read_status(struct phy_device
*phydev
)
26 int gpio_int_status
, ret
= 0;
28 gpio_int_status
= cortina_read_reg(phydev
, VILLA_GLOBAL_GPIO_1_INTS
);
29 if (gpio_int_status
< 0) {
30 ret
= gpio_int_status
;
34 if (gpio_int_status
& 0x8) {
35 /* up when edc_convergedS set */
36 phydev
->speed
= SPEED_10000
;
37 phydev
->duplex
= DUPLEX_FULL
;
47 static int cortina_probe(struct phy_device
*phydev
)
50 int id_lsb
= 0, id_msb
= 0;
52 /* Read device id from phy registers. */
53 id_lsb
= cortina_read_reg(phydev
, VILLA_GLOBAL_CHIP_ID_LSB
);
57 phy_id
= id_lsb
<< 16;
59 id_msb
= cortina_read_reg(phydev
, VILLA_GLOBAL_CHIP_ID_MSB
);
65 /* Make sure the device tree binding matched the driver with the
68 if (phy_id
!= phydev
->drv
->phy_id
) {
69 phydev_err(phydev
, "Error matching phy with %s driver\n",
77 static struct phy_driver cortina_driver
[] = {
79 .phy_id
= PHY_ID_CS4340
,
80 .phy_id_mask
= 0xffffffff,
81 .name
= "Cortina CS4340",
82 .features
= PHY_10GBIT_FEATURES
,
83 .config_aneg
= gen10g_config_aneg
,
84 .read_status
= cortina_read_status
,
85 .soft_reset
= genphy_no_soft_reset
,
86 .probe
= cortina_probe
,
90 module_phy_driver(cortina_driver
);
92 static struct mdio_device_id __maybe_unused cortina_tbl
[] = {
93 { PHY_ID_CS4340
, 0xffffffff},
97 MODULE_DEVICE_TABLE(mdio
, cortina_tbl
);
99 MODULE_DESCRIPTION("Cortina EDC CDR 10G Ethernet PHY driver");
100 MODULE_AUTHOR("NXP");
101 MODULE_LICENSE("GPL");