treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / net / usb / qmi_wwan.c
blob9485c8d1de8a37c78b210dd2a9b41aea5c1c2eb7
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (c) 2012 Bjørn Mork <bjorn@mork.no>
5 * The probing code is heavily inspired by cdc_ether, which is:
6 * Copyright (C) 2003-2005 by David Brownell
7 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
8 */
10 #include <linux/module.h>
11 #include <linux/sched/signal.h>
12 #include <linux/netdevice.h>
13 #include <linux/ethtool.h>
14 #include <linux/etherdevice.h>
15 #include <linux/if_arp.h>
16 #include <linux/mii.h>
17 #include <linux/rtnetlink.h>
18 #include <linux/usb.h>
19 #include <linux/usb/cdc.h>
20 #include <linux/usb/usbnet.h>
21 #include <linux/usb/cdc-wdm.h>
22 #include <linux/u64_stats_sync.h>
24 /* This driver supports wwan (3G/LTE/?) devices using a vendor
25 * specific management protocol called Qualcomm MSM Interface (QMI) -
26 * in addition to the more common AT commands over serial interface
27 * management
29 * QMI is wrapped in CDC, using CDC encapsulated commands on the
30 * control ("master") interface of a two-interface CDC Union
31 * resembling standard CDC ECM. The devices do not use the control
32 * interface for any other CDC messages. Most likely because the
33 * management protocol is used in place of the standard CDC
34 * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE
36 * Alternatively, control and data functions can be combined in a
37 * single USB interface.
39 * Handling a protocol like QMI is out of the scope for any driver.
40 * It is exported as a character device using the cdc-wdm driver as
41 * a subdriver, enabling userspace applications ("modem managers") to
42 * handle it.
44 * These devices may alternatively/additionally be configured using AT
45 * commands on a serial interface
48 /* driver specific data */
49 struct qmi_wwan_state {
50 struct usb_driver *subdriver;
51 atomic_t pmcount;
52 unsigned long flags;
53 struct usb_interface *control;
54 struct usb_interface *data;
57 enum qmi_wwan_flags {
58 QMI_WWAN_FLAG_RAWIP = 1 << 0,
59 QMI_WWAN_FLAG_MUX = 1 << 1,
62 enum qmi_wwan_quirks {
63 QMI_WWAN_QUIRK_DTR = 1 << 0, /* needs "set DTR" request */
64 QMI_WWAN_QUIRK_QUECTEL_DYNCFG = 1 << 1, /* check num. endpoints */
67 struct qmimux_hdr {
68 u8 pad;
69 u8 mux_id;
70 __be16 pkt_len;
73 struct qmimux_priv {
74 struct net_device *real_dev;
75 u8 mux_id;
76 struct pcpu_sw_netstats __percpu *stats64;
79 static int qmimux_open(struct net_device *dev)
81 struct qmimux_priv *priv = netdev_priv(dev);
82 struct net_device *real_dev = priv->real_dev;
84 if (!(priv->real_dev->flags & IFF_UP))
85 return -ENETDOWN;
87 if (netif_carrier_ok(real_dev))
88 netif_carrier_on(dev);
89 return 0;
92 static int qmimux_stop(struct net_device *dev)
94 netif_carrier_off(dev);
95 return 0;
98 static netdev_tx_t qmimux_start_xmit(struct sk_buff *skb, struct net_device *dev)
100 struct qmimux_priv *priv = netdev_priv(dev);
101 unsigned int len = skb->len;
102 struct qmimux_hdr *hdr;
103 netdev_tx_t ret;
105 hdr = skb_push(skb, sizeof(struct qmimux_hdr));
106 hdr->pad = 0;
107 hdr->mux_id = priv->mux_id;
108 hdr->pkt_len = cpu_to_be16(len);
109 skb->dev = priv->real_dev;
110 ret = dev_queue_xmit(skb);
112 if (likely(ret == NET_XMIT_SUCCESS || ret == NET_XMIT_CN)) {
113 struct pcpu_sw_netstats *stats64 = this_cpu_ptr(priv->stats64);
115 u64_stats_update_begin(&stats64->syncp);
116 stats64->tx_packets++;
117 stats64->tx_bytes += len;
118 u64_stats_update_end(&stats64->syncp);
119 } else {
120 dev->stats.tx_dropped++;
123 return ret;
126 static void qmimux_get_stats64(struct net_device *net,
127 struct rtnl_link_stats64 *stats)
129 struct qmimux_priv *priv = netdev_priv(net);
130 unsigned int start;
131 int cpu;
133 netdev_stats_to_stats64(stats, &net->stats);
135 for_each_possible_cpu(cpu) {
136 struct pcpu_sw_netstats *stats64;
137 u64 rx_packets, rx_bytes;
138 u64 tx_packets, tx_bytes;
140 stats64 = per_cpu_ptr(priv->stats64, cpu);
142 do {
143 start = u64_stats_fetch_begin_irq(&stats64->syncp);
144 rx_packets = stats64->rx_packets;
145 rx_bytes = stats64->rx_bytes;
146 tx_packets = stats64->tx_packets;
147 tx_bytes = stats64->tx_bytes;
148 } while (u64_stats_fetch_retry_irq(&stats64->syncp, start));
150 stats->rx_packets += rx_packets;
151 stats->rx_bytes += rx_bytes;
152 stats->tx_packets += tx_packets;
153 stats->tx_bytes += tx_bytes;
157 static const struct net_device_ops qmimux_netdev_ops = {
158 .ndo_open = qmimux_open,
159 .ndo_stop = qmimux_stop,
160 .ndo_start_xmit = qmimux_start_xmit,
161 .ndo_get_stats64 = qmimux_get_stats64,
164 static void qmimux_setup(struct net_device *dev)
166 dev->header_ops = NULL; /* No header */
167 dev->type = ARPHRD_NONE;
168 dev->hard_header_len = 0;
169 dev->addr_len = 0;
170 dev->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
171 dev->netdev_ops = &qmimux_netdev_ops;
172 dev->mtu = 1500;
173 dev->needs_free_netdev = true;
176 static struct net_device *qmimux_find_dev(struct usbnet *dev, u8 mux_id)
178 struct qmimux_priv *priv;
179 struct list_head *iter;
180 struct net_device *ldev;
182 rcu_read_lock();
183 netdev_for_each_upper_dev_rcu(dev->net, ldev, iter) {
184 priv = netdev_priv(ldev);
185 if (priv->mux_id == mux_id) {
186 rcu_read_unlock();
187 return ldev;
190 rcu_read_unlock();
191 return NULL;
194 static bool qmimux_has_slaves(struct usbnet *dev)
196 return !list_empty(&dev->net->adj_list.upper);
199 static int qmimux_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
201 unsigned int len, offset = 0, pad_len, pkt_len;
202 struct qmimux_hdr *hdr;
203 struct net_device *net;
204 struct sk_buff *skbn;
205 u8 qmimux_hdr_sz = sizeof(*hdr);
207 while (offset + qmimux_hdr_sz < skb->len) {
208 hdr = (struct qmimux_hdr *)(skb->data + offset);
209 len = be16_to_cpu(hdr->pkt_len);
211 /* drop the packet, bogus length */
212 if (offset + len + qmimux_hdr_sz > skb->len)
213 return 0;
215 /* control packet, we do not know what to do */
216 if (hdr->pad & 0x80)
217 goto skip;
219 /* extract padding length and check for valid length info */
220 pad_len = hdr->pad & 0x3f;
221 if (len == 0 || pad_len >= len)
222 goto skip;
223 pkt_len = len - pad_len;
225 net = qmimux_find_dev(dev, hdr->mux_id);
226 if (!net)
227 goto skip;
228 skbn = netdev_alloc_skb(net, pkt_len);
229 if (!skbn)
230 return 0;
231 skbn->dev = net;
233 switch (skb->data[offset + qmimux_hdr_sz] & 0xf0) {
234 case 0x40:
235 skbn->protocol = htons(ETH_P_IP);
236 break;
237 case 0x60:
238 skbn->protocol = htons(ETH_P_IPV6);
239 break;
240 default:
241 /* not ip - do not know what to do */
242 goto skip;
245 skb_put_data(skbn, skb->data + offset + qmimux_hdr_sz, pkt_len);
246 if (netif_rx(skbn) != NET_RX_SUCCESS) {
247 net->stats.rx_errors++;
248 return 0;
249 } else {
250 struct pcpu_sw_netstats *stats64;
251 struct qmimux_priv *priv = netdev_priv(net);
253 stats64 = this_cpu_ptr(priv->stats64);
254 u64_stats_update_begin(&stats64->syncp);
255 stats64->rx_packets++;
256 stats64->rx_bytes += pkt_len;
257 u64_stats_update_end(&stats64->syncp);
260 skip:
261 offset += len + qmimux_hdr_sz;
263 return 1;
266 static int qmimux_register_device(struct net_device *real_dev, u8 mux_id)
268 struct net_device *new_dev;
269 struct qmimux_priv *priv;
270 int err;
272 new_dev = alloc_netdev(sizeof(struct qmimux_priv),
273 "qmimux%d", NET_NAME_UNKNOWN, qmimux_setup);
274 if (!new_dev)
275 return -ENOBUFS;
277 dev_net_set(new_dev, dev_net(real_dev));
278 priv = netdev_priv(new_dev);
279 priv->mux_id = mux_id;
280 priv->real_dev = real_dev;
282 priv->stats64 = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
283 if (!priv->stats64) {
284 err = -ENOBUFS;
285 goto out_free_newdev;
288 err = register_netdevice(new_dev);
289 if (err < 0)
290 goto out_free_newdev;
292 /* Account for reference in struct qmimux_priv_priv */
293 dev_hold(real_dev);
295 err = netdev_upper_dev_link(real_dev, new_dev, NULL);
296 if (err)
297 goto out_unregister_netdev;
299 netif_stacked_transfer_operstate(real_dev, new_dev);
301 return 0;
303 out_unregister_netdev:
304 unregister_netdevice(new_dev);
305 dev_put(real_dev);
307 out_free_newdev:
308 free_netdev(new_dev);
309 return err;
312 static void qmimux_unregister_device(struct net_device *dev,
313 struct list_head *head)
315 struct qmimux_priv *priv = netdev_priv(dev);
316 struct net_device *real_dev = priv->real_dev;
318 free_percpu(priv->stats64);
319 netdev_upper_dev_unlink(real_dev, dev);
320 unregister_netdevice_queue(dev, head);
322 /* Get rid of the reference to real_dev */
323 dev_put(real_dev);
326 static void qmi_wwan_netdev_setup(struct net_device *net)
328 struct usbnet *dev = netdev_priv(net);
329 struct qmi_wwan_state *info = (void *)&dev->data;
331 if (info->flags & QMI_WWAN_FLAG_RAWIP) {
332 net->header_ops = NULL; /* No header */
333 net->type = ARPHRD_NONE;
334 net->hard_header_len = 0;
335 net->addr_len = 0;
336 net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
337 set_bit(EVENT_NO_IP_ALIGN, &dev->flags);
338 netdev_dbg(net, "mode: raw IP\n");
339 } else if (!net->header_ops) { /* don't bother if already set */
340 ether_setup(net);
341 clear_bit(EVENT_NO_IP_ALIGN, &dev->flags);
342 netdev_dbg(net, "mode: Ethernet\n");
345 /* recalculate buffers after changing hard_header_len */
346 usbnet_change_mtu(net, net->mtu);
349 static ssize_t raw_ip_show(struct device *d, struct device_attribute *attr, char *buf)
351 struct usbnet *dev = netdev_priv(to_net_dev(d));
352 struct qmi_wwan_state *info = (void *)&dev->data;
354 return sprintf(buf, "%c\n", info->flags & QMI_WWAN_FLAG_RAWIP ? 'Y' : 'N');
357 static ssize_t raw_ip_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len)
359 struct usbnet *dev = netdev_priv(to_net_dev(d));
360 struct qmi_wwan_state *info = (void *)&dev->data;
361 bool enable;
362 int ret;
364 if (strtobool(buf, &enable))
365 return -EINVAL;
367 /* no change? */
368 if (enable == (info->flags & QMI_WWAN_FLAG_RAWIP))
369 return len;
371 if (!rtnl_trylock())
372 return restart_syscall();
374 /* we don't want to modify a running netdev */
375 if (netif_running(dev->net)) {
376 netdev_err(dev->net, "Cannot change a running device\n");
377 ret = -EBUSY;
378 goto err;
381 /* let other drivers deny the change */
382 ret = call_netdevice_notifiers(NETDEV_PRE_TYPE_CHANGE, dev->net);
383 ret = notifier_to_errno(ret);
384 if (ret) {
385 netdev_err(dev->net, "Type change was refused\n");
386 goto err;
389 if (enable)
390 info->flags |= QMI_WWAN_FLAG_RAWIP;
391 else
392 info->flags &= ~QMI_WWAN_FLAG_RAWIP;
393 qmi_wwan_netdev_setup(dev->net);
394 call_netdevice_notifiers(NETDEV_POST_TYPE_CHANGE, dev->net);
395 ret = len;
396 err:
397 rtnl_unlock();
398 return ret;
401 static ssize_t add_mux_show(struct device *d, struct device_attribute *attr, char *buf)
403 struct net_device *dev = to_net_dev(d);
404 struct qmimux_priv *priv;
405 struct list_head *iter;
406 struct net_device *ldev;
407 ssize_t count = 0;
409 rcu_read_lock();
410 netdev_for_each_upper_dev_rcu(dev, ldev, iter) {
411 priv = netdev_priv(ldev);
412 count += scnprintf(&buf[count], PAGE_SIZE - count,
413 "0x%02x\n", priv->mux_id);
415 rcu_read_unlock();
416 return count;
419 static ssize_t add_mux_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len)
421 struct usbnet *dev = netdev_priv(to_net_dev(d));
422 struct qmi_wwan_state *info = (void *)&dev->data;
423 u8 mux_id;
424 int ret;
426 if (kstrtou8(buf, 0, &mux_id))
427 return -EINVAL;
429 /* mux_id [1 - 254] for compatibility with ip(8) and the rmnet driver */
430 if (mux_id < 1 || mux_id > 254)
431 return -EINVAL;
433 if (!rtnl_trylock())
434 return restart_syscall();
436 if (qmimux_find_dev(dev, mux_id)) {
437 netdev_err(dev->net, "mux_id already present\n");
438 ret = -EINVAL;
439 goto err;
442 /* we don't want to modify a running netdev */
443 if (netif_running(dev->net)) {
444 netdev_err(dev->net, "Cannot change a running device\n");
445 ret = -EBUSY;
446 goto err;
449 ret = qmimux_register_device(dev->net, mux_id);
450 if (!ret) {
451 info->flags |= QMI_WWAN_FLAG_MUX;
452 ret = len;
454 err:
455 rtnl_unlock();
456 return ret;
459 static ssize_t del_mux_show(struct device *d, struct device_attribute *attr, char *buf)
461 return add_mux_show(d, attr, buf);
464 static ssize_t del_mux_store(struct device *d, struct device_attribute *attr, const char *buf, size_t len)
466 struct usbnet *dev = netdev_priv(to_net_dev(d));
467 struct qmi_wwan_state *info = (void *)&dev->data;
468 struct net_device *del_dev;
469 u8 mux_id;
470 int ret = 0;
472 if (kstrtou8(buf, 0, &mux_id))
473 return -EINVAL;
475 if (!rtnl_trylock())
476 return restart_syscall();
478 /* we don't want to modify a running netdev */
479 if (netif_running(dev->net)) {
480 netdev_err(dev->net, "Cannot change a running device\n");
481 ret = -EBUSY;
482 goto err;
485 del_dev = qmimux_find_dev(dev, mux_id);
486 if (!del_dev) {
487 netdev_err(dev->net, "mux_id not present\n");
488 ret = -EINVAL;
489 goto err;
491 qmimux_unregister_device(del_dev, NULL);
493 if (!qmimux_has_slaves(dev))
494 info->flags &= ~QMI_WWAN_FLAG_MUX;
495 ret = len;
496 err:
497 rtnl_unlock();
498 return ret;
501 static DEVICE_ATTR_RW(raw_ip);
502 static DEVICE_ATTR_RW(add_mux);
503 static DEVICE_ATTR_RW(del_mux);
505 static struct attribute *qmi_wwan_sysfs_attrs[] = {
506 &dev_attr_raw_ip.attr,
507 &dev_attr_add_mux.attr,
508 &dev_attr_del_mux.attr,
509 NULL,
512 static struct attribute_group qmi_wwan_sysfs_attr_group = {
513 .name = "qmi",
514 .attrs = qmi_wwan_sysfs_attrs,
517 /* default ethernet address used by the modem */
518 static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3};
520 static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00};
522 /* Make up an ethernet header if the packet doesn't have one.
524 * A firmware bug common among several devices cause them to send raw
525 * IP packets under some circumstances. There is no way for the
526 * driver/host to know when this will happen. And even when the bug
527 * hits, some packets will still arrive with an intact header.
529 * The supported devices are only capably of sending IPv4, IPv6 and
530 * ARP packets on a point-to-point link. Any packet with an ethernet
531 * header will have either our address or a broadcast/multicast
532 * address as destination. ARP packets will always have a header.
534 * This means that this function will reliably add the appropriate
535 * header iff necessary, provided our hardware address does not start
536 * with 4 or 6.
538 * Another common firmware bug results in all packets being addressed
539 * to 00:a0:c6:00:00:00 despite the host address being different.
540 * This function will also fixup such packets.
542 static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
544 struct qmi_wwan_state *info = (void *)&dev->data;
545 bool rawip = info->flags & QMI_WWAN_FLAG_RAWIP;
546 __be16 proto;
548 /* This check is no longer done by usbnet */
549 if (skb->len < dev->net->hard_header_len)
550 return 0;
552 if (info->flags & QMI_WWAN_FLAG_MUX)
553 return qmimux_rx_fixup(dev, skb);
555 switch (skb->data[0] & 0xf0) {
556 case 0x40:
557 proto = htons(ETH_P_IP);
558 break;
559 case 0x60:
560 proto = htons(ETH_P_IPV6);
561 break;
562 case 0x00:
563 if (rawip)
564 return 0;
565 if (is_multicast_ether_addr(skb->data))
566 return 1;
567 /* possibly bogus destination - rewrite just in case */
568 skb_reset_mac_header(skb);
569 goto fix_dest;
570 default:
571 if (rawip)
572 return 0;
573 /* pass along other packets without modifications */
574 return 1;
576 if (rawip) {
577 skb_reset_mac_header(skb);
578 skb->dev = dev->net; /* normally set by eth_type_trans */
579 skb->protocol = proto;
580 return 1;
583 if (skb_headroom(skb) < ETH_HLEN)
584 return 0;
585 skb_push(skb, ETH_HLEN);
586 skb_reset_mac_header(skb);
587 eth_hdr(skb)->h_proto = proto;
588 eth_zero_addr(eth_hdr(skb)->h_source);
589 fix_dest:
590 memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
591 return 1;
594 /* very simplistic detection of IPv4 or IPv6 headers */
595 static bool possibly_iphdr(const char *data)
597 return (data[0] & 0xd0) == 0x40;
600 /* disallow addresses which may be confused with IP headers */
601 static int qmi_wwan_mac_addr(struct net_device *dev, void *p)
603 int ret;
604 struct sockaddr *addr = p;
606 ret = eth_prepare_mac_addr_change(dev, p);
607 if (ret < 0)
608 return ret;
609 if (possibly_iphdr(addr->sa_data))
610 return -EADDRNOTAVAIL;
611 eth_commit_mac_addr_change(dev, p);
612 return 0;
615 static const struct net_device_ops qmi_wwan_netdev_ops = {
616 .ndo_open = usbnet_open,
617 .ndo_stop = usbnet_stop,
618 .ndo_start_xmit = usbnet_start_xmit,
619 .ndo_tx_timeout = usbnet_tx_timeout,
620 .ndo_change_mtu = usbnet_change_mtu,
621 .ndo_get_stats64 = usbnet_get_stats64,
622 .ndo_set_mac_address = qmi_wwan_mac_addr,
623 .ndo_validate_addr = eth_validate_addr,
626 /* using a counter to merge subdriver requests with our own into a
627 * combined state
629 static int qmi_wwan_manage_power(struct usbnet *dev, int on)
631 struct qmi_wwan_state *info = (void *)&dev->data;
632 int rv;
634 dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__,
635 atomic_read(&info->pmcount), on);
637 if ((on && atomic_add_return(1, &info->pmcount) == 1) ||
638 (!on && atomic_dec_and_test(&info->pmcount))) {
639 /* need autopm_get/put here to ensure the usbcore sees
640 * the new value
642 rv = usb_autopm_get_interface(dev->intf);
643 dev->intf->needs_remote_wakeup = on;
644 if (!rv)
645 usb_autopm_put_interface(dev->intf);
647 return 0;
650 static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
652 struct usbnet *dev = usb_get_intfdata(intf);
654 /* can be called while disconnecting */
655 if (!dev)
656 return 0;
657 return qmi_wwan_manage_power(dev, on);
660 /* collect all three endpoints and register subdriver */
661 static int qmi_wwan_register_subdriver(struct usbnet *dev)
663 int rv;
664 struct usb_driver *subdriver = NULL;
665 struct qmi_wwan_state *info = (void *)&dev->data;
667 /* collect bulk endpoints */
668 rv = usbnet_get_endpoints(dev, info->data);
669 if (rv < 0)
670 goto err;
672 /* update status endpoint if separate control interface */
673 if (info->control != info->data)
674 dev->status = &info->control->cur_altsetting->endpoint[0];
676 /* require interrupt endpoint for subdriver */
677 if (!dev->status) {
678 rv = -EINVAL;
679 goto err;
682 /* for subdriver power management */
683 atomic_set(&info->pmcount, 0);
685 /* register subdriver */
686 subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc,
687 4096, &qmi_wwan_cdc_wdm_manage_power);
688 if (IS_ERR(subdriver)) {
689 dev_err(&info->control->dev, "subdriver registration failed\n");
690 rv = PTR_ERR(subdriver);
691 goto err;
694 /* prevent usbnet from using status endpoint */
695 dev->status = NULL;
697 /* save subdriver struct for suspend/resume wrappers */
698 info->subdriver = subdriver;
700 err:
701 return rv;
704 /* Send CDC SetControlLineState request, setting or clearing the DTR.
705 * "Required for Autoconnect and 9x30 to wake up" according to the
706 * GobiNet driver. The requirement has been verified on an MDM9230
707 * based Sierra Wireless MC7455
709 static int qmi_wwan_change_dtr(struct usbnet *dev, bool on)
711 u8 intf = dev->intf->cur_altsetting->desc.bInterfaceNumber;
713 return usbnet_write_cmd(dev, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
714 USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
715 on ? 0x01 : 0x00, intf, NULL, 0);
718 static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
720 int status = -1;
721 u8 *buf = intf->cur_altsetting->extra;
722 int len = intf->cur_altsetting->extralen;
723 struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
724 struct usb_cdc_union_desc *cdc_union;
725 struct usb_cdc_ether_desc *cdc_ether;
726 struct usb_driver *driver = driver_of(intf);
727 struct qmi_wwan_state *info = (void *)&dev->data;
728 struct usb_cdc_parsed_header hdr;
730 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) <
731 sizeof(struct qmi_wwan_state)));
733 /* set up initial state */
734 info->control = intf;
735 info->data = intf;
737 /* and a number of CDC descriptors */
738 cdc_parse_cdc_header(&hdr, intf, buf, len);
739 cdc_union = hdr.usb_cdc_union_desc;
740 cdc_ether = hdr.usb_cdc_ether_desc;
742 /* Use separate control and data interfaces if we found a CDC Union */
743 if (cdc_union) {
744 info->data = usb_ifnum_to_if(dev->udev,
745 cdc_union->bSlaveInterface0);
746 if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 ||
747 !info->data) {
748 dev_err(&intf->dev,
749 "bogus CDC Union: master=%u, slave=%u\n",
750 cdc_union->bMasterInterface0,
751 cdc_union->bSlaveInterface0);
753 /* ignore and continue... */
754 cdc_union = NULL;
755 info->data = intf;
759 /* errors aren't fatal - we can live with the dynamic address */
760 if (cdc_ether && cdc_ether->wMaxSegmentSize) {
761 dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize);
762 usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress);
765 /* claim data interface and set it up */
766 if (info->control != info->data) {
767 status = usb_driver_claim_interface(driver, info->data, dev);
768 if (status < 0)
769 goto err;
772 status = qmi_wwan_register_subdriver(dev);
773 if (status < 0 && info->control != info->data) {
774 usb_set_intfdata(info->data, NULL);
775 usb_driver_release_interface(driver, info->data);
778 /* disabling remote wakeup on MDM9x30 devices has the same
779 * effect as clearing DTR. The device will not respond to QMI
780 * requests until we set DTR again. This is similar to a
781 * QMI_CTL SYNC request, clearing a lot of firmware state
782 * including the client ID allocations.
784 * Our usage model allows a session to span multiple
785 * open/close events, so we must prevent the firmware from
786 * clearing out state the clients might need.
788 * MDM9x30 is the first QMI chipset with USB3 support. Abuse
789 * this fact to enable the quirk for all USB3 devices.
791 * There are also chipsets with the same "set DTR" requirement
792 * but without USB3 support. Devices based on these chips
793 * need a quirk flag in the device ID table.
795 if (dev->driver_info->data & QMI_WWAN_QUIRK_DTR ||
796 le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
797 qmi_wwan_manage_power(dev, 1);
798 qmi_wwan_change_dtr(dev, true);
801 /* Never use the same address on both ends of the link, even if the
802 * buggy firmware told us to. Or, if device is assigned the well-known
803 * buggy firmware MAC address, replace it with a random address,
805 if (ether_addr_equal(dev->net->dev_addr, default_modem_addr) ||
806 ether_addr_equal(dev->net->dev_addr, buggy_fw_addr))
807 eth_hw_addr_random(dev->net);
809 /* make MAC addr easily distinguishable from an IP header */
810 if (possibly_iphdr(dev->net->dev_addr)) {
811 dev->net->dev_addr[0] |= 0x02; /* set local assignment bit */
812 dev->net->dev_addr[0] &= 0xbf; /* clear "IP" bit */
814 dev->net->netdev_ops = &qmi_wwan_netdev_ops;
815 dev->net->sysfs_groups[0] = &qmi_wwan_sysfs_attr_group;
816 err:
817 return status;
820 static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
822 struct qmi_wwan_state *info = (void *)&dev->data;
823 struct usb_driver *driver = driver_of(intf);
824 struct usb_interface *other;
826 if (info->subdriver && info->subdriver->disconnect)
827 info->subdriver->disconnect(info->control);
829 /* disable MDM9x30 quirk */
830 if (le16_to_cpu(dev->udev->descriptor.bcdUSB) >= 0x0201) {
831 qmi_wwan_change_dtr(dev, false);
832 qmi_wwan_manage_power(dev, 0);
835 /* allow user to unbind using either control or data */
836 if (intf == info->control)
837 other = info->data;
838 else
839 other = info->control;
841 /* only if not shared */
842 if (other && intf != other) {
843 usb_set_intfdata(other, NULL);
844 usb_driver_release_interface(driver, other);
847 info->subdriver = NULL;
848 info->data = NULL;
849 info->control = NULL;
852 /* suspend/resume wrappers calling both usbnet and the cdc-wdm
853 * subdriver if present.
855 * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
856 * wrappers for those without adding usbnet reset support first.
858 static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
860 struct usbnet *dev = usb_get_intfdata(intf);
861 struct qmi_wwan_state *info = (void *)&dev->data;
862 int ret;
864 /* Both usbnet_suspend() and subdriver->suspend() MUST return 0
865 * in system sleep context, otherwise, the resume callback has
866 * to recover device from previous suspend failure.
868 ret = usbnet_suspend(intf, message);
869 if (ret < 0)
870 goto err;
872 if (intf == info->control && info->subdriver &&
873 info->subdriver->suspend)
874 ret = info->subdriver->suspend(intf, message);
875 if (ret < 0)
876 usbnet_resume(intf);
877 err:
878 return ret;
881 static int qmi_wwan_resume(struct usb_interface *intf)
883 struct usbnet *dev = usb_get_intfdata(intf);
884 struct qmi_wwan_state *info = (void *)&dev->data;
885 int ret = 0;
886 bool callsub = (intf == info->control && info->subdriver &&
887 info->subdriver->resume);
889 if (callsub)
890 ret = info->subdriver->resume(intf);
891 if (ret < 0)
892 goto err;
893 ret = usbnet_resume(intf);
894 if (ret < 0 && callsub)
895 info->subdriver->suspend(intf, PMSG_SUSPEND);
896 err:
897 return ret;
900 static const struct driver_info qmi_wwan_info = {
901 .description = "WWAN/QMI device",
902 .flags = FLAG_WWAN | FLAG_SEND_ZLP,
903 .bind = qmi_wwan_bind,
904 .unbind = qmi_wwan_unbind,
905 .manage_power = qmi_wwan_manage_power,
906 .rx_fixup = qmi_wwan_rx_fixup,
909 static const struct driver_info qmi_wwan_info_quirk_dtr = {
910 .description = "WWAN/QMI device",
911 .flags = FLAG_WWAN | FLAG_SEND_ZLP,
912 .bind = qmi_wwan_bind,
913 .unbind = qmi_wwan_unbind,
914 .manage_power = qmi_wwan_manage_power,
915 .rx_fixup = qmi_wwan_rx_fixup,
916 .data = QMI_WWAN_QUIRK_DTR,
919 static const struct driver_info qmi_wwan_info_quirk_quectel_dyncfg = {
920 .description = "WWAN/QMI device",
921 .flags = FLAG_WWAN | FLAG_SEND_ZLP,
922 .bind = qmi_wwan_bind,
923 .unbind = qmi_wwan_unbind,
924 .manage_power = qmi_wwan_manage_power,
925 .rx_fixup = qmi_wwan_rx_fixup,
926 .data = QMI_WWAN_QUIRK_DTR | QMI_WWAN_QUIRK_QUECTEL_DYNCFG,
929 #define HUAWEI_VENDOR_ID 0x12D1
931 /* map QMI/wwan function by a fixed interface number */
932 #define QMI_FIXED_INTF(vend, prod, num) \
933 USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
934 .driver_info = (unsigned long)&qmi_wwan_info
936 /* devices requiring "set DTR" quirk */
937 #define QMI_QUIRK_SET_DTR(vend, prod, num) \
938 USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
939 .driver_info = (unsigned long)&qmi_wwan_info_quirk_dtr
941 /* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
942 #define QMI_GOBI1K_DEVICE(vend, prod) \
943 QMI_FIXED_INTF(vend, prod, 3)
945 /* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */
946 #define QMI_GOBI_DEVICE(vend, prod) \
947 QMI_FIXED_INTF(vend, prod, 0)
949 /* Quectel does not use fixed interface numbers on at least some of their
950 * devices. We need to check the number of endpoints to ensure that we bind to
951 * the correct interface.
953 #define QMI_QUIRK_QUECTEL_DYNCFG(vend, prod) \
954 USB_DEVICE_AND_INTERFACE_INFO(vend, prod, USB_CLASS_VENDOR_SPEC, \
955 USB_SUBCLASS_VENDOR_SPEC, 0xff), \
956 .driver_info = (unsigned long)&qmi_wwan_info_quirk_quectel_dyncfg
958 static const struct usb_device_id products[] = {
959 /* 1. CDC ECM like devices match on the control interface */
960 { /* Huawei E392, E398 and possibly others sharing both device id and more... */
961 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9),
962 .driver_info = (unsigned long)&qmi_wwan_info,
964 { /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
965 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57),
966 .driver_info = (unsigned long)&qmi_wwan_info,
968 { /* HUAWEI_INTERFACE_NDIS_CONTROL_QUALCOMM */
969 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69),
970 .driver_info = (unsigned long)&qmi_wwan_info,
972 { /* Motorola Mapphone devices with MDM6600 */
973 USB_VENDOR_AND_INTERFACE_INFO(0x22b8, USB_CLASS_VENDOR_SPEC, 0xfb, 0xff),
974 .driver_info = (unsigned long)&qmi_wwan_info,
977 /* 2. Combined interface devices matching on class+protocol */
978 { /* Huawei E367 and possibly others in "Windows mode" */
979 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7),
980 .driver_info = (unsigned long)&qmi_wwan_info,
982 { /* Huawei E392, E398 and possibly others in "Windows mode" */
983 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17),
984 .driver_info = (unsigned long)&qmi_wwan_info,
986 { /* HUAWEI_NDIS_SINGLE_INTERFACE_VDF */
987 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x37),
988 .driver_info = (unsigned long)&qmi_wwan_info,
990 { /* HUAWEI_INTERFACE_NDIS_HW_QUALCOMM */
991 USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x67),
992 .driver_info = (unsigned long)&qmi_wwan_info,
994 { /* Pantech UML290, P4200 and more */
995 USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff),
996 .driver_info = (unsigned long)&qmi_wwan_info,
998 { /* Pantech UML290 - newer firmware */
999 USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff),
1000 .driver_info = (unsigned long)&qmi_wwan_info,
1002 { /* Novatel USB551L and MC551 */
1003 USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001,
1004 USB_CLASS_COMM,
1005 USB_CDC_SUBCLASS_ETHERNET,
1006 USB_CDC_PROTO_NONE),
1007 .driver_info = (unsigned long)&qmi_wwan_info,
1009 { /* Novatel E362 */
1010 USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010,
1011 USB_CLASS_COMM,
1012 USB_CDC_SUBCLASS_ETHERNET,
1013 USB_CDC_PROTO_NONE),
1014 .driver_info = (unsigned long)&qmi_wwan_info,
1016 { /* Novatel Expedite E371 */
1017 USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9011,
1018 USB_CLASS_COMM,
1019 USB_CDC_SUBCLASS_ETHERNET,
1020 USB_CDC_PROTO_NONE),
1021 .driver_info = (unsigned long)&qmi_wwan_info,
1023 { /* Dell Wireless 5800 (Novatel E362) */
1024 USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8195,
1025 USB_CLASS_COMM,
1026 USB_CDC_SUBCLASS_ETHERNET,
1027 USB_CDC_PROTO_NONE),
1028 .driver_info = (unsigned long)&qmi_wwan_info,
1030 { /* Dell Wireless 5800 V2 (Novatel E362) */
1031 USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8196,
1032 USB_CLASS_COMM,
1033 USB_CDC_SUBCLASS_ETHERNET,
1034 USB_CDC_PROTO_NONE),
1035 .driver_info = (unsigned long)&qmi_wwan_info,
1037 { /* Dell Wireless 5804 (Novatel E371) */
1038 USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x819b,
1039 USB_CLASS_COMM,
1040 USB_CDC_SUBCLASS_ETHERNET,
1041 USB_CDC_PROTO_NONE),
1042 .driver_info = (unsigned long)&qmi_wwan_info,
1044 { /* ADU960S */
1045 USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a,
1046 USB_CLASS_COMM,
1047 USB_CDC_SUBCLASS_ETHERNET,
1048 USB_CDC_PROTO_NONE),
1049 .driver_info = (unsigned long)&qmi_wwan_info,
1051 { /* HP lt2523 (Novatel E371) */
1052 USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d,
1053 USB_CLASS_COMM,
1054 USB_CDC_SUBCLASS_ETHERNET,
1055 USB_CDC_PROTO_NONE),
1056 .driver_info = (unsigned long)&qmi_wwan_info,
1058 { /* HP lt4112 LTE/HSPA+ Gobi 4G Module (Huawei me906e) */
1059 USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x581d, USB_CLASS_VENDOR_SPEC, 1, 7),
1060 .driver_info = (unsigned long)&qmi_wwan_info,
1062 {QMI_QUIRK_QUECTEL_DYNCFG(0x2c7c, 0x0125)}, /* Quectel EC25, EC20 R2.0 Mini PCIe */
1063 {QMI_QUIRK_QUECTEL_DYNCFG(0x2c7c, 0x0306)}, /* Quectel EP06/EG06/EM06 */
1064 {QMI_QUIRK_QUECTEL_DYNCFG(0x2c7c, 0x0512)}, /* Quectel EG12/EM12 */
1065 {QMI_QUIRK_QUECTEL_DYNCFG(0x2c7c, 0x0800)}, /* Quectel RM500Q-GL */
1067 /* 3. Combined interface devices matching on interface number */
1068 {QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */
1069 {QMI_FIXED_INTF(0x05c6, 0x6001, 3)}, /* 4G LTE usb-modem U901 */
1070 {QMI_FIXED_INTF(0x05c6, 0x7000, 0)},
1071 {QMI_FIXED_INTF(0x05c6, 0x7001, 1)},
1072 {QMI_FIXED_INTF(0x05c6, 0x7002, 1)},
1073 {QMI_FIXED_INTF(0x05c6, 0x7101, 1)},
1074 {QMI_FIXED_INTF(0x05c6, 0x7101, 2)},
1075 {QMI_FIXED_INTF(0x05c6, 0x7101, 3)},
1076 {QMI_FIXED_INTF(0x05c6, 0x7102, 1)},
1077 {QMI_FIXED_INTF(0x05c6, 0x7102, 2)},
1078 {QMI_FIXED_INTF(0x05c6, 0x7102, 3)},
1079 {QMI_FIXED_INTF(0x05c6, 0x8000, 7)},
1080 {QMI_FIXED_INTF(0x05c6, 0x8001, 6)},
1081 {QMI_FIXED_INTF(0x05c6, 0x9000, 4)},
1082 {QMI_FIXED_INTF(0x05c6, 0x9003, 4)},
1083 {QMI_FIXED_INTF(0x05c6, 0x9005, 2)},
1084 {QMI_FIXED_INTF(0x05c6, 0x900a, 4)},
1085 {QMI_FIXED_INTF(0x05c6, 0x900b, 2)},
1086 {QMI_FIXED_INTF(0x05c6, 0x900c, 4)},
1087 {QMI_FIXED_INTF(0x05c6, 0x900c, 5)},
1088 {QMI_FIXED_INTF(0x05c6, 0x900c, 6)},
1089 {QMI_FIXED_INTF(0x05c6, 0x900d, 5)},
1090 {QMI_FIXED_INTF(0x05c6, 0x900f, 3)},
1091 {QMI_FIXED_INTF(0x05c6, 0x900f, 4)},
1092 {QMI_FIXED_INTF(0x05c6, 0x900f, 5)},
1093 {QMI_FIXED_INTF(0x05c6, 0x9010, 4)},
1094 {QMI_FIXED_INTF(0x05c6, 0x9010, 5)},
1095 {QMI_FIXED_INTF(0x05c6, 0x9011, 3)},
1096 {QMI_FIXED_INTF(0x05c6, 0x9011, 4)},
1097 {QMI_FIXED_INTF(0x05c6, 0x9021, 1)},
1098 {QMI_FIXED_INTF(0x05c6, 0x9022, 2)},
1099 {QMI_FIXED_INTF(0x05c6, 0x9025, 4)}, /* Alcatel-sbell ASB TL131 TDD LTE (China Mobile) */
1100 {QMI_FIXED_INTF(0x05c6, 0x9026, 3)},
1101 {QMI_FIXED_INTF(0x05c6, 0x902e, 5)},
1102 {QMI_FIXED_INTF(0x05c6, 0x9031, 5)},
1103 {QMI_FIXED_INTF(0x05c6, 0x9032, 4)},
1104 {QMI_FIXED_INTF(0x05c6, 0x9033, 3)},
1105 {QMI_FIXED_INTF(0x05c6, 0x9033, 4)},
1106 {QMI_FIXED_INTF(0x05c6, 0x9033, 5)},
1107 {QMI_FIXED_INTF(0x05c6, 0x9033, 6)},
1108 {QMI_FIXED_INTF(0x05c6, 0x9034, 3)},
1109 {QMI_FIXED_INTF(0x05c6, 0x9034, 4)},
1110 {QMI_FIXED_INTF(0x05c6, 0x9034, 5)},
1111 {QMI_FIXED_INTF(0x05c6, 0x9034, 6)},
1112 {QMI_FIXED_INTF(0x05c6, 0x9034, 7)},
1113 {QMI_FIXED_INTF(0x05c6, 0x9035, 4)},
1114 {QMI_FIXED_INTF(0x05c6, 0x9036, 3)},
1115 {QMI_FIXED_INTF(0x05c6, 0x9037, 5)},
1116 {QMI_FIXED_INTF(0x05c6, 0x9038, 4)},
1117 {QMI_FIXED_INTF(0x05c6, 0x903b, 7)},
1118 {QMI_FIXED_INTF(0x05c6, 0x903c, 6)},
1119 {QMI_FIXED_INTF(0x05c6, 0x903d, 6)},
1120 {QMI_FIXED_INTF(0x05c6, 0x903e, 5)},
1121 {QMI_FIXED_INTF(0x05c6, 0x9043, 3)},
1122 {QMI_FIXED_INTF(0x05c6, 0x9046, 3)},
1123 {QMI_FIXED_INTF(0x05c6, 0x9046, 4)},
1124 {QMI_FIXED_INTF(0x05c6, 0x9046, 5)},
1125 {QMI_FIXED_INTF(0x05c6, 0x9047, 2)},
1126 {QMI_FIXED_INTF(0x05c6, 0x9047, 3)},
1127 {QMI_FIXED_INTF(0x05c6, 0x9047, 4)},
1128 {QMI_FIXED_INTF(0x05c6, 0x9048, 4)},
1129 {QMI_FIXED_INTF(0x05c6, 0x9048, 5)},
1130 {QMI_FIXED_INTF(0x05c6, 0x9048, 6)},
1131 {QMI_FIXED_INTF(0x05c6, 0x9048, 7)},
1132 {QMI_FIXED_INTF(0x05c6, 0x9048, 8)},
1133 {QMI_FIXED_INTF(0x05c6, 0x904c, 5)},
1134 {QMI_FIXED_INTF(0x05c6, 0x904c, 6)},
1135 {QMI_FIXED_INTF(0x05c6, 0x904c, 7)},
1136 {QMI_FIXED_INTF(0x05c6, 0x904c, 8)},
1137 {QMI_FIXED_INTF(0x05c6, 0x9050, 3)},
1138 {QMI_FIXED_INTF(0x05c6, 0x9052, 4)},
1139 {QMI_FIXED_INTF(0x05c6, 0x9053, 6)},
1140 {QMI_FIXED_INTF(0x05c6, 0x9053, 7)},
1141 {QMI_FIXED_INTF(0x05c6, 0x9054, 5)},
1142 {QMI_FIXED_INTF(0x05c6, 0x9054, 6)},
1143 {QMI_FIXED_INTF(0x05c6, 0x9055, 3)},
1144 {QMI_FIXED_INTF(0x05c6, 0x9055, 4)},
1145 {QMI_FIXED_INTF(0x05c6, 0x9055, 5)},
1146 {QMI_FIXED_INTF(0x05c6, 0x9055, 6)},
1147 {QMI_FIXED_INTF(0x05c6, 0x9055, 7)},
1148 {QMI_FIXED_INTF(0x05c6, 0x9056, 3)},
1149 {QMI_FIXED_INTF(0x05c6, 0x9062, 2)},
1150 {QMI_FIXED_INTF(0x05c6, 0x9062, 3)},
1151 {QMI_FIXED_INTF(0x05c6, 0x9062, 4)},
1152 {QMI_FIXED_INTF(0x05c6, 0x9062, 5)},
1153 {QMI_FIXED_INTF(0x05c6, 0x9062, 6)},
1154 {QMI_FIXED_INTF(0x05c6, 0x9062, 7)},
1155 {QMI_FIXED_INTF(0x05c6, 0x9062, 8)},
1156 {QMI_FIXED_INTF(0x05c6, 0x9062, 9)},
1157 {QMI_FIXED_INTF(0x05c6, 0x9064, 3)},
1158 {QMI_FIXED_INTF(0x05c6, 0x9065, 6)},
1159 {QMI_FIXED_INTF(0x05c6, 0x9065, 7)},
1160 {QMI_FIXED_INTF(0x05c6, 0x9066, 5)},
1161 {QMI_FIXED_INTF(0x05c6, 0x9066, 6)},
1162 {QMI_FIXED_INTF(0x05c6, 0x9067, 1)},
1163 {QMI_FIXED_INTF(0x05c6, 0x9068, 2)},
1164 {QMI_FIXED_INTF(0x05c6, 0x9068, 3)},
1165 {QMI_FIXED_INTF(0x05c6, 0x9068, 4)},
1166 {QMI_FIXED_INTF(0x05c6, 0x9068, 5)},
1167 {QMI_FIXED_INTF(0x05c6, 0x9068, 6)},
1168 {QMI_FIXED_INTF(0x05c6, 0x9068, 7)},
1169 {QMI_FIXED_INTF(0x05c6, 0x9069, 5)},
1170 {QMI_FIXED_INTF(0x05c6, 0x9069, 6)},
1171 {QMI_FIXED_INTF(0x05c6, 0x9069, 7)},
1172 {QMI_FIXED_INTF(0x05c6, 0x9069, 8)},
1173 {QMI_FIXED_INTF(0x05c6, 0x9070, 4)},
1174 {QMI_FIXED_INTF(0x05c6, 0x9070, 5)},
1175 {QMI_FIXED_INTF(0x05c6, 0x9075, 5)},
1176 {QMI_FIXED_INTF(0x05c6, 0x9076, 4)},
1177 {QMI_FIXED_INTF(0x05c6, 0x9076, 5)},
1178 {QMI_FIXED_INTF(0x05c6, 0x9076, 6)},
1179 {QMI_FIXED_INTF(0x05c6, 0x9076, 7)},
1180 {QMI_FIXED_INTF(0x05c6, 0x9076, 8)},
1181 {QMI_FIXED_INTF(0x05c6, 0x9077, 3)},
1182 {QMI_FIXED_INTF(0x05c6, 0x9077, 4)},
1183 {QMI_FIXED_INTF(0x05c6, 0x9077, 5)},
1184 {QMI_FIXED_INTF(0x05c6, 0x9077, 6)},
1185 {QMI_FIXED_INTF(0x05c6, 0x9078, 3)},
1186 {QMI_FIXED_INTF(0x05c6, 0x9079, 4)},
1187 {QMI_FIXED_INTF(0x05c6, 0x9079, 5)},
1188 {QMI_FIXED_INTF(0x05c6, 0x9079, 6)},
1189 {QMI_FIXED_INTF(0x05c6, 0x9079, 7)},
1190 {QMI_FIXED_INTF(0x05c6, 0x9079, 8)},
1191 {QMI_FIXED_INTF(0x05c6, 0x9080, 5)},
1192 {QMI_FIXED_INTF(0x05c6, 0x9080, 6)},
1193 {QMI_FIXED_INTF(0x05c6, 0x9080, 7)},
1194 {QMI_FIXED_INTF(0x05c6, 0x9080, 8)},
1195 {QMI_FIXED_INTF(0x05c6, 0x9083, 3)},
1196 {QMI_FIXED_INTF(0x05c6, 0x9084, 4)},
1197 {QMI_FIXED_INTF(0x05c6, 0x90b2, 3)}, /* ublox R410M */
1198 {QMI_FIXED_INTF(0x05c6, 0x920d, 0)},
1199 {QMI_FIXED_INTF(0x05c6, 0x920d, 5)},
1200 {QMI_QUIRK_SET_DTR(0x05c6, 0x9625, 4)}, /* YUGA CLM920-NC5 */
1201 {QMI_FIXED_INTF(0x0846, 0x68a2, 8)},
1202 {QMI_FIXED_INTF(0x0846, 0x68d3, 8)}, /* Netgear Aircard 779S */
1203 {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */
1204 {QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */
1205 {QMI_FIXED_INTF(0x1435, 0x0918, 3)}, /* Wistron NeWeb D16Q1 */
1206 {QMI_FIXED_INTF(0x1435, 0x0918, 4)}, /* Wistron NeWeb D16Q1 */
1207 {QMI_FIXED_INTF(0x1435, 0x0918, 5)}, /* Wistron NeWeb D16Q1 */
1208 {QMI_FIXED_INTF(0x1435, 0x3185, 4)}, /* Wistron NeWeb M18Q5 */
1209 {QMI_FIXED_INTF(0x1435, 0xd111, 4)}, /* M9615A DM11-1 D51QC */
1210 {QMI_FIXED_INTF(0x1435, 0xd181, 3)}, /* Wistron NeWeb D18Q1 */
1211 {QMI_FIXED_INTF(0x1435, 0xd181, 4)}, /* Wistron NeWeb D18Q1 */
1212 {QMI_FIXED_INTF(0x1435, 0xd181, 5)}, /* Wistron NeWeb D18Q1 */
1213 {QMI_FIXED_INTF(0x1435, 0xd182, 4)}, /* Wistron NeWeb D18 */
1214 {QMI_FIXED_INTF(0x1435, 0xd182, 5)}, /* Wistron NeWeb D18 */
1215 {QMI_FIXED_INTF(0x1435, 0xd191, 4)}, /* Wistron NeWeb D19Q1 */
1216 {QMI_QUIRK_SET_DTR(0x1508, 0x1001, 4)}, /* Fibocom NL668 series */
1217 {QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */
1218 {QMI_FIXED_INTF(0x16d8, 0x6007, 0)}, /* CMOTech CHE-628S */
1219 {QMI_FIXED_INTF(0x16d8, 0x6008, 0)}, /* CMOTech CMU-301 */
1220 {QMI_FIXED_INTF(0x16d8, 0x6280, 0)}, /* CMOTech CHU-628 */
1221 {QMI_FIXED_INTF(0x16d8, 0x7001, 0)}, /* CMOTech CHU-720S */
1222 {QMI_FIXED_INTF(0x16d8, 0x7002, 0)}, /* CMOTech 7002 */
1223 {QMI_FIXED_INTF(0x16d8, 0x7003, 4)}, /* CMOTech CHU-629K */
1224 {QMI_FIXED_INTF(0x16d8, 0x7004, 3)}, /* CMOTech 7004 */
1225 {QMI_FIXED_INTF(0x16d8, 0x7006, 5)}, /* CMOTech CGU-629 */
1226 {QMI_FIXED_INTF(0x16d8, 0x700a, 4)}, /* CMOTech CHU-629S */
1227 {QMI_FIXED_INTF(0x16d8, 0x7211, 0)}, /* CMOTech CHU-720I */
1228 {QMI_FIXED_INTF(0x16d8, 0x7212, 0)}, /* CMOTech 7212 */
1229 {QMI_FIXED_INTF(0x16d8, 0x7213, 0)}, /* CMOTech 7213 */
1230 {QMI_FIXED_INTF(0x16d8, 0x7251, 1)}, /* CMOTech 7251 */
1231 {QMI_FIXED_INTF(0x16d8, 0x7252, 1)}, /* CMOTech 7252 */
1232 {QMI_FIXED_INTF(0x16d8, 0x7253, 1)}, /* CMOTech 7253 */
1233 {QMI_FIXED_INTF(0x19d2, 0x0002, 1)},
1234 {QMI_FIXED_INTF(0x19d2, 0x0012, 1)},
1235 {QMI_FIXED_INTF(0x19d2, 0x0017, 3)},
1236 {QMI_FIXED_INTF(0x19d2, 0x0019, 3)}, /* ONDA MT689DC */
1237 {QMI_FIXED_INTF(0x19d2, 0x0021, 4)},
1238 {QMI_FIXED_INTF(0x19d2, 0x0025, 1)},
1239 {QMI_FIXED_INTF(0x19d2, 0x0031, 4)},
1240 {QMI_FIXED_INTF(0x19d2, 0x0042, 4)},
1241 {QMI_FIXED_INTF(0x19d2, 0x0049, 5)},
1242 {QMI_FIXED_INTF(0x19d2, 0x0052, 4)},
1243 {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */
1244 {QMI_FIXED_INTF(0x19d2, 0x0058, 4)},
1245 {QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */
1246 {QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */
1247 {QMI_FIXED_INTF(0x19d2, 0x0113, 5)},
1248 {QMI_FIXED_INTF(0x19d2, 0x0118, 5)},
1249 {QMI_FIXED_INTF(0x19d2, 0x0121, 5)},
1250 {QMI_FIXED_INTF(0x19d2, 0x0123, 4)},
1251 {QMI_FIXED_INTF(0x19d2, 0x0124, 5)},
1252 {QMI_FIXED_INTF(0x19d2, 0x0125, 6)},
1253 {QMI_FIXED_INTF(0x19d2, 0x0126, 5)},
1254 {QMI_FIXED_INTF(0x19d2, 0x0130, 1)},
1255 {QMI_FIXED_INTF(0x19d2, 0x0133, 3)},
1256 {QMI_FIXED_INTF(0x19d2, 0x0141, 5)},
1257 {QMI_FIXED_INTF(0x19d2, 0x0157, 5)}, /* ZTE MF683 */
1258 {QMI_FIXED_INTF(0x19d2, 0x0158, 3)},
1259 {QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */
1260 {QMI_FIXED_INTF(0x19d2, 0x0168, 4)},
1261 {QMI_FIXED_INTF(0x19d2, 0x0176, 3)},
1262 {QMI_FIXED_INTF(0x19d2, 0x0178, 3)},
1263 {QMI_FIXED_INTF(0x19d2, 0x0191, 4)}, /* ZTE EuFi890 */
1264 {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */
1265 {QMI_FIXED_INTF(0x19d2, 0x0200, 1)},
1266 {QMI_FIXED_INTF(0x19d2, 0x0257, 3)}, /* ZTE MF821 */
1267 {QMI_FIXED_INTF(0x19d2, 0x0265, 4)}, /* ONDA MT8205 4G LTE */
1268 {QMI_FIXED_INTF(0x19d2, 0x0284, 4)}, /* ZTE MF880 */
1269 {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */
1270 {QMI_FIXED_INTF(0x19d2, 0x0396, 3)}, /* ZTE ZM8620 */
1271 {QMI_FIXED_INTF(0x19d2, 0x0412, 4)}, /* Telewell TW-LTE 4G */
1272 {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */
1273 {QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */
1274 {QMI_FIXED_INTF(0x19d2, 0x1012, 4)},
1275 {QMI_FIXED_INTF(0x19d2, 0x1018, 3)}, /* ZTE (Vodafone) K5006-Z */
1276 {QMI_FIXED_INTF(0x19d2, 0x1021, 2)},
1277 {QMI_FIXED_INTF(0x19d2, 0x1245, 4)},
1278 {QMI_FIXED_INTF(0x19d2, 0x1247, 4)},
1279 {QMI_FIXED_INTF(0x19d2, 0x1252, 4)},
1280 {QMI_FIXED_INTF(0x19d2, 0x1254, 4)},
1281 {QMI_FIXED_INTF(0x19d2, 0x1255, 3)},
1282 {QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
1283 {QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
1284 {QMI_FIXED_INTF(0x19d2, 0x1270, 5)}, /* ZTE MF667 */
1285 {QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
1286 {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */
1287 {QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
1288 {QMI_FIXED_INTF(0x19d2, 0x1425, 2)},
1289 {QMI_FIXED_INTF(0x19d2, 0x1426, 2)}, /* ZTE MF91 */
1290 {QMI_FIXED_INTF(0x19d2, 0x1428, 2)}, /* Telewell TW-LTE 4G v2 */
1291 {QMI_FIXED_INTF(0x19d2, 0x1432, 3)}, /* ZTE ME3620 */
1292 {QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */
1293 {QMI_FIXED_INTF(0x2001, 0x7e16, 3)}, /* D-Link DWM-221 */
1294 {QMI_FIXED_INTF(0x2001, 0x7e19, 4)}, /* D-Link DWM-221 B1 */
1295 {QMI_FIXED_INTF(0x2001, 0x7e35, 4)}, /* D-Link DWM-222 */
1296 {QMI_FIXED_INTF(0x2001, 0x7e3d, 4)}, /* D-Link DWM-222 A2 */
1297 {QMI_FIXED_INTF(0x2020, 0x2031, 4)}, /* Olicard 600 */
1298 {QMI_FIXED_INTF(0x2020, 0x2033, 4)}, /* BroadMobi BM806U */
1299 {QMI_FIXED_INTF(0x2020, 0x2060, 4)}, /* BroadMobi BM818 */
1300 {QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */
1301 {QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */
1302 {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */
1303 {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */
1304 {QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 8)}, /* Sierra Wireless MC7304/MC7354, WP76xx */
1305 {QMI_QUIRK_SET_DTR(0x1199, 0x68c0, 10)},/* Sierra Wireless MC7304/MC7354 */
1306 {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */
1307 {QMI_FIXED_INTF(0x1199, 0x901f, 8)}, /* Sierra Wireless EM7355 */
1308 {QMI_FIXED_INTF(0x1199, 0x9041, 8)}, /* Sierra Wireless MC7305/MC7355 */
1309 {QMI_FIXED_INTF(0x1199, 0x9041, 10)}, /* Sierra Wireless MC7305/MC7355 */
1310 {QMI_FIXED_INTF(0x1199, 0x9051, 8)}, /* Netgear AirCard 340U */
1311 {QMI_FIXED_INTF(0x1199, 0x9053, 8)}, /* Sierra Wireless Modem */
1312 {QMI_FIXED_INTF(0x1199, 0x9054, 8)}, /* Sierra Wireless Modem */
1313 {QMI_FIXED_INTF(0x1199, 0x9055, 8)}, /* Netgear AirCard 341U */
1314 {QMI_FIXED_INTF(0x1199, 0x9056, 8)}, /* Sierra Wireless Modem */
1315 {QMI_FIXED_INTF(0x1199, 0x9057, 8)},
1316 {QMI_FIXED_INTF(0x1199, 0x9061, 8)}, /* Sierra Wireless Modem */
1317 {QMI_FIXED_INTF(0x1199, 0x9063, 8)}, /* Sierra Wireless EM7305 */
1318 {QMI_FIXED_INTF(0x1199, 0x9063, 10)}, /* Sierra Wireless EM7305 */
1319 {QMI_QUIRK_SET_DTR(0x1199, 0x9071, 8)}, /* Sierra Wireless MC74xx */
1320 {QMI_QUIRK_SET_DTR(0x1199, 0x9071, 10)},/* Sierra Wireless MC74xx */
1321 {QMI_QUIRK_SET_DTR(0x1199, 0x9079, 8)}, /* Sierra Wireless EM74xx */
1322 {QMI_QUIRK_SET_DTR(0x1199, 0x9079, 10)},/* Sierra Wireless EM74xx */
1323 {QMI_QUIRK_SET_DTR(0x1199, 0x907b, 8)}, /* Sierra Wireless EM74xx */
1324 {QMI_QUIRK_SET_DTR(0x1199, 0x907b, 10)},/* Sierra Wireless EM74xx */
1325 {QMI_QUIRK_SET_DTR(0x1199, 0x9091, 8)}, /* Sierra Wireless EM7565 */
1326 {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
1327 {QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */
1328 {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */
1329 {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */
1330 {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */
1331 {QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */
1332 {QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */
1333 {QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */
1334 {QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
1335 {QMI_QUIRK_SET_DTR(0x1bc7, 0x1201, 2)}, /* Telit LE920, LE920A4 */
1336 {QMI_QUIRK_SET_DTR(0x1bc7, 0x1260, 2)}, /* Telit LE910Cx */
1337 {QMI_QUIRK_SET_DTR(0x1bc7, 0x1261, 2)}, /* Telit LE910Cx */
1338 {QMI_QUIRK_SET_DTR(0x1bc7, 0x1900, 1)}, /* Telit LN940 series */
1339 {QMI_FIXED_INTF(0x1c9e, 0x9801, 3)}, /* Telewell TW-3G HSPA+ */
1340 {QMI_FIXED_INTF(0x1c9e, 0x9803, 4)}, /* Telewell TW-3G HSPA+ */
1341 {QMI_FIXED_INTF(0x1c9e, 0x9b01, 3)}, /* XS Stick W100-2 from 4G Systems */
1342 {QMI_FIXED_INTF(0x0b3c, 0xc000, 4)}, /* Olivetti Olicard 100 */
1343 {QMI_FIXED_INTF(0x0b3c, 0xc001, 4)}, /* Olivetti Olicard 120 */
1344 {QMI_FIXED_INTF(0x0b3c, 0xc002, 4)}, /* Olivetti Olicard 140 */
1345 {QMI_FIXED_INTF(0x0b3c, 0xc004, 6)}, /* Olivetti Olicard 155 */
1346 {QMI_FIXED_INTF(0x0b3c, 0xc005, 6)}, /* Olivetti Olicard 200 */
1347 {QMI_FIXED_INTF(0x0b3c, 0xc00a, 6)}, /* Olivetti Olicard 160 */
1348 {QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)}, /* Olivetti Olicard 500 */
1349 {QMI_FIXED_INTF(0x1e2d, 0x0060, 4)}, /* Cinterion PLxx */
1350 {QMI_FIXED_INTF(0x1e2d, 0x0053, 4)}, /* Cinterion PHxx,PXxx */
1351 {QMI_FIXED_INTF(0x1e2d, 0x0063, 10)}, /* Cinterion ALASxx (1 RmNet) */
1352 {QMI_FIXED_INTF(0x1e2d, 0x0082, 4)}, /* Cinterion PHxx,PXxx (2 RmNet) */
1353 {QMI_FIXED_INTF(0x1e2d, 0x0082, 5)}, /* Cinterion PHxx,PXxx (2 RmNet) */
1354 {QMI_FIXED_INTF(0x1e2d, 0x0083, 4)}, /* Cinterion PHxx,PXxx (1 RmNet + USB Audio)*/
1355 {QMI_QUIRK_SET_DTR(0x1e2d, 0x00b0, 4)}, /* Cinterion CLS8 */
1356 {QMI_FIXED_INTF(0x413c, 0x81a2, 8)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
1357 {QMI_FIXED_INTF(0x413c, 0x81a3, 8)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
1358 {QMI_FIXED_INTF(0x413c, 0x81a4, 8)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
1359 {QMI_FIXED_INTF(0x413c, 0x81a8, 8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
1360 {QMI_FIXED_INTF(0x413c, 0x81a9, 8)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
1361 {QMI_FIXED_INTF(0x413c, 0x81b1, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card */
1362 {QMI_FIXED_INTF(0x413c, 0x81b3, 8)}, /* Dell Wireless 5809e Gobi(TM) 4G LTE Mobile Broadband Card (rev3) */
1363 {QMI_FIXED_INTF(0x413c, 0x81b6, 8)}, /* Dell Wireless 5811e */
1364 {QMI_FIXED_INTF(0x413c, 0x81b6, 10)}, /* Dell Wireless 5811e */
1365 {QMI_FIXED_INTF(0x413c, 0x81d7, 0)}, /* Dell Wireless 5821e */
1366 {QMI_FIXED_INTF(0x413c, 0x81e0, 0)}, /* Dell Wireless 5821e with eSIM support*/
1367 {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */
1368 {QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)}, /* HP lt4120 Snapdragon X5 LTE */
1369 {QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */
1370 {QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)}, /* SIMCom 7100E, 7230E, 7600E ++ */
1371 {QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)}, /* Quectel EC21 Mini PCIe */
1372 {QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)}, /* Quectel EG91 */
1373 {QMI_FIXED_INTF(0x2c7c, 0x0296, 4)}, /* Quectel BG96 */
1374 {QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)}, /* Fibocom NL678 series */
1375 {QMI_FIXED_INTF(0x0489, 0xe0b4, 0)}, /* Foxconn T77W968 LTE */
1376 {QMI_FIXED_INTF(0x0489, 0xe0b5, 0)}, /* Foxconn T77W968 LTE with eSIM support*/
1378 /* 4. Gobi 1000 devices */
1379 {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
1380 {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
1381 {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
1382 {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
1383 {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel/Verizon USB-1000 */
1384 {QMI_GOBI1K_DEVICE(0x1410, 0xa002)}, /* Novatel Gobi Modem device */
1385 {QMI_GOBI1K_DEVICE(0x1410, 0xa003)}, /* Novatel Gobi Modem device */
1386 {QMI_GOBI1K_DEVICE(0x1410, 0xa004)}, /* Novatel Gobi Modem device */
1387 {QMI_GOBI1K_DEVICE(0x1410, 0xa005)}, /* Novatel Gobi Modem device */
1388 {QMI_GOBI1K_DEVICE(0x1410, 0xa006)}, /* Novatel Gobi Modem device */
1389 {QMI_GOBI1K_DEVICE(0x1410, 0xa007)}, /* Novatel Gobi Modem device */
1390 {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
1391 {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
1392 {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
1393 {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
1394 {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
1395 {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
1396 {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
1397 {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
1399 /* 5. Gobi 2000 and 3000 devices */
1400 {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
1401 {QMI_GOBI_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */
1402 {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
1403 {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
1404 {QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */
1405 {QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */
1406 {QMI_GOBI_DEVICE(0x05c6, 0x9215)}, /* Acer Gobi 2000 Modem device (VP413) */
1407 {QMI_FIXED_INTF(0x05c6, 0x9215, 4)}, /* Quectel EC20 Mini PCIe */
1408 {QMI_GOBI_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */
1409 {QMI_GOBI_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */
1410 {QMI_GOBI_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */
1411 {QMI_GOBI_DEVICE(0x0af0, 0x8120)}, /* Option GTM681W */
1412 {QMI_GOBI_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */
1413 {QMI_GOBI_DEVICE(0x1199, 0x68a9)}, /* Sierra Wireless Modem */
1414 {QMI_GOBI_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1415 {QMI_GOBI_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1416 {QMI_GOBI_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1417 {QMI_GOBI_DEVICE(0x1199, 0x9004)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1418 {QMI_GOBI_DEVICE(0x1199, 0x9005)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1419 {QMI_GOBI_DEVICE(0x1199, 0x9006)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1420 {QMI_GOBI_DEVICE(0x1199, 0x9007)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1421 {QMI_GOBI_DEVICE(0x1199, 0x9008)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1422 {QMI_GOBI_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1423 {QMI_GOBI_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
1424 {QMI_GOBI_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */
1425 {QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
1426 {QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
1427 {QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
1428 {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
1429 {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
1430 {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
1431 {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */
1432 {QMI_GOBI_DEVICE(0x12d1, 0x14f1)}, /* Sony Gobi 3000 Composite */
1433 {QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel E396) */
1435 { } /* END */
1437 MODULE_DEVICE_TABLE(usb, products);
1439 static bool quectel_ec20_detected(struct usb_interface *intf)
1441 struct usb_device *dev = interface_to_usbdev(intf);
1443 if (dev->actconfig &&
1444 le16_to_cpu(dev->descriptor.idVendor) == 0x05c6 &&
1445 le16_to_cpu(dev->descriptor.idProduct) == 0x9215 &&
1446 dev->actconfig->desc.bNumInterfaces == 5)
1447 return true;
1449 return false;
1452 static int qmi_wwan_probe(struct usb_interface *intf,
1453 const struct usb_device_id *prod)
1455 struct usb_device_id *id = (struct usb_device_id *)prod;
1456 struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
1457 const struct driver_info *info;
1459 /* Workaround to enable dynamic IDs. This disables usbnet
1460 * blacklisting functionality. Which, if required, can be
1461 * reimplemented here by using a magic "blacklist" value
1462 * instead of 0 in the static device id table
1464 if (!id->driver_info) {
1465 dev_dbg(&intf->dev, "setting defaults for dynamic device id\n");
1466 id->driver_info = (unsigned long)&qmi_wwan_info;
1469 /* There are devices where the same interface number can be
1470 * configured as different functions. We should only bind to
1471 * vendor specific functions when matching on interface number
1473 if (id->match_flags & USB_DEVICE_ID_MATCH_INT_NUMBER &&
1474 desc->bInterfaceClass != USB_CLASS_VENDOR_SPEC) {
1475 dev_dbg(&intf->dev,
1476 "Rejecting interface number match for class %02x\n",
1477 desc->bInterfaceClass);
1478 return -ENODEV;
1481 /* Quectel EC20 quirk where we've QMI on interface 4 instead of 0 */
1482 if (quectel_ec20_detected(intf) && desc->bInterfaceNumber == 0) {
1483 dev_dbg(&intf->dev, "Quectel EC20 quirk, skipping interface 0\n");
1484 return -ENODEV;
1487 /* Several Quectel modems supports dynamic interface configuration, so
1488 * we need to match on class/subclass/protocol. These values are
1489 * identical for the diagnostic- and QMI-interface, but bNumEndpoints is
1490 * different. Ignore the current interface if the number of endpoints
1491 * equals the number for the diag interface (two).
1493 info = (void *)id->driver_info;
1495 if (info->data & QMI_WWAN_QUIRK_QUECTEL_DYNCFG) {
1496 if (desc->bNumEndpoints == 2)
1497 return -ENODEV;
1500 return usbnet_probe(intf, id);
1503 static void qmi_wwan_disconnect(struct usb_interface *intf)
1505 struct usbnet *dev = usb_get_intfdata(intf);
1506 struct qmi_wwan_state *info;
1507 struct list_head *iter;
1508 struct net_device *ldev;
1509 LIST_HEAD(list);
1511 /* called twice if separate control and data intf */
1512 if (!dev)
1513 return;
1514 info = (void *)&dev->data;
1515 if (info->flags & QMI_WWAN_FLAG_MUX) {
1516 if (!rtnl_trylock()) {
1517 restart_syscall();
1518 return;
1520 rcu_read_lock();
1521 netdev_for_each_upper_dev_rcu(dev->net, ldev, iter)
1522 qmimux_unregister_device(ldev, &list);
1523 rcu_read_unlock();
1524 unregister_netdevice_many(&list);
1525 rtnl_unlock();
1526 info->flags &= ~QMI_WWAN_FLAG_MUX;
1528 usbnet_disconnect(intf);
1531 static struct usb_driver qmi_wwan_driver = {
1532 .name = "qmi_wwan",
1533 .id_table = products,
1534 .probe = qmi_wwan_probe,
1535 .disconnect = qmi_wwan_disconnect,
1536 .suspend = qmi_wwan_suspend,
1537 .resume = qmi_wwan_resume,
1538 .reset_resume = qmi_wwan_resume,
1539 .supports_autosuspend = 1,
1540 .disable_hub_initiated_lpm = 1,
1543 module_usb_driver(qmi_wwan_driver);
1545 MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
1546 MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver");
1547 MODULE_LICENSE("GPL");