drivers/net/usb/zaurus.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
   4  * Copyright (C) 2002-2005 by David Brownell
   5  */
   6
   7 // #define      DEBUG                   // error path messages, extra info
   8 // #define      VERBOSE                 // more; success messages
   9
  10 #include <linux/module.h>
  11 #include <linux/netdevice.h>
  12 #include <linux/ethtool.h>
  13 #include <linux/workqueue.h>
  14 #include <linux/mii.h>
  15 #include <linux/crc32.h>
  16 #include <linux/usb.h>
  17 #include <linux/usb/cdc.h>
  18 #include <linux/usb/usbnet.h>
  19
  20
  21 /*
  22  * All known Zaurii lie about their standards conformance.  At least
  23  * the earliest SA-1100 models lie by saying they support CDC Ethernet.
  24  * Some later models (especially PXA-25x and PXA-27x based ones) lie
  25  * and say they support CDC MDLM (for access to cell phone modems).
  26  *
  27  * There are non-Zaurus products that use these same protocols too.
  28  *
  29  * The annoying thing is that at the same time Sharp was developing
  30  * that annoying standards-breaking software, the Linux community had
  31  * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
  32  * That is, the same functionality but not violating standards.
  33  *
  34  * The CDC Ethernet nonconformance points are troublesome to hosts
  35  * with a true CDC Ethernet implementation:
  36  *   - Framing appends a CRC, which the spec says drivers "must not" do;
  37  *   - Transfers data in altsetting zero, instead of altsetting 1;
  38  *   - All these peripherals use the same ethernet address.
  39  *
  40  * The CDC MDLM nonconformance is less immediately troublesome, since all
  41  * MDLM implementations are quasi-proprietary anyway.
  42  */
  43
  44 static struct sk_buff *
  45 zaurus_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
  46 {
  47         int                     padlen;
  48         struct sk_buff          *skb2;
  49
  50         padlen = 2;
  51         if (!skb_cloned(skb)) {
  52                 int     tailroom = skb_tailroom(skb);
  53                 if ((padlen + 4) <= tailroom)
  54                         goto done;
  55         }
  56         skb2 = skb_copy_expand(skb, 0, 4 + padlen, flags);
  57         dev_kfree_skb_any(skb);
  58         skb = skb2;
  59         if (skb) {
  60                 u32             fcs;
  61 done:
  62                 fcs = crc32_le(~0, skb->data, skb->len);
  63                 fcs = ~fcs;
  64
  65                 skb_put_u8(skb, fcs & 0xff);
  66                 skb_put_u8(skb, (fcs >> 8) & 0xff);
  67                 skb_put_u8(skb, (fcs >> 16) & 0xff);
  68                 skb_put_u8(skb, (fcs >> 24) & 0xff);
  69         }
  70         return skb;
  71 }
  72
  73 static int zaurus_bind(struct usbnet *dev, struct usb_interface *intf)
  74 {
  75         /* Belcarra's funky framing has other options; mostly
  76          * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
  77          */
  78         dev->net->hard_header_len += 6;
  79         dev->rx_urb_size = dev->net->hard_header_len + dev->net->mtu;
  80         return usbnet_generic_cdc_bind(dev, intf);
  81 }
  82
  83 /* PDA style devices are always connected if present */
  84 static int always_connected (struct usbnet *dev)
  85 {
  86         return 0;
  87 }
  88
  89 static const struct driver_info zaurus_sl5x00_info = {
  90         .description =  "Sharp Zaurus SL-5x00",
  91         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
  92         .check_connect = always_connected,
  93         .bind =         zaurus_bind,
  94         .unbind =       usbnet_cdc_unbind,
  95         .tx_fixup =     zaurus_tx_fixup,
  96 };
  97 #define ZAURUS_STRONGARM_INFO   ((unsigned long)&zaurus_sl5x00_info)
  98
  99 static const struct driver_info zaurus_pxa_info = {
 100         .description =  "Sharp Zaurus, PXA-2xx based",
 101         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 102         .check_connect = always_connected,
 103         .bind =         zaurus_bind,
 104         .unbind =       usbnet_cdc_unbind,
 105         .tx_fixup =     zaurus_tx_fixup,
 106 };
 107 #define ZAURUS_PXA_INFO         ((unsigned long)&zaurus_pxa_info)
 108
 109 static const struct driver_info olympus_mxl_info = {
 110         .description =  "Olympus R1000",
 111         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 112         .check_connect = always_connected,
 113         .bind =         zaurus_bind,
 114         .unbind =       usbnet_cdc_unbind,
 115         .tx_fixup =     zaurus_tx_fixup,
 116 };
 117 #define OLYMPUS_MXL_INFO        ((unsigned long)&olympus_mxl_info)
 118
 119
 120 /* Some more recent products using Lineo/Belcarra code will wrongly claim
 121  * CDC MDLM conformance.  They aren't conformant:  data endpoints live
 122  * in the control interface, there's no data interface, and it's not used
 123  * to talk to a cell phone radio.  But at least we can detect these two
 124  * pseudo-classes, rather than growing this product list with entries for
 125  * each new nonconformant product (sigh).
 126  */
 127 static const u8 safe_guid[16] = {
 128         0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
 129         0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
 130 };
 131 static const u8 blan_guid[16] = {
 132         0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
 133         0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
 134 };
 135
 136 static int blan_mdlm_bind(struct usbnet *dev, struct usb_interface *intf)
 137 {
 138         u8                              *buf = intf->cur_altsetting->extra;
 139         int                             len = intf->cur_altsetting->extralen;
 140         struct usb_cdc_mdlm_desc        *desc = NULL;
 141         struct usb_cdc_mdlm_detail_desc *detail = NULL;
 142
 143         while (len > 3) {
 144                 if (buf [1] != USB_DT_CS_INTERFACE)
 145                         goto next_desc;
 146
 147                 /* use bDescriptorSubType, and just verify that we get a
 148                  * "BLAN" (or "SAFE") descriptor.
 149                  */
 150                 switch (buf [2]) {
 151                 case USB_CDC_MDLM_TYPE:
 152                         if (desc) {
 153                                 dev_dbg(&intf->dev, "extra MDLM\n");
 154                                 goto bad_desc;
 155                         }
 156                         desc = (void *) buf;
 157                         if (desc->bLength != sizeof *desc) {
 158                                 dev_dbg(&intf->dev, "MDLM len %u\n",
 159                                         desc->bLength);
 160                                 goto bad_desc;
 161                         }
 162                         /* expect bcdVersion 1.0, ignore */
 163                         if (memcmp(&desc->bGUID, blan_guid, 16) &&
 164                             memcmp(&desc->bGUID, safe_guid, 16)) {
 165                                 /* hey, this one might _really_ be MDLM! */
 166                                 dev_dbg(&intf->dev, "MDLM guid\n");
 167                                 goto bad_desc;
 168                         }
 169                         break;
 170                 case USB_CDC_MDLM_DETAIL_TYPE:
 171                         if (detail) {
 172                                 dev_dbg(&intf->dev, "extra MDLM detail\n");
 173                                 goto bad_desc;
 174                         }
 175                         detail = (void *) buf;
 176                         switch (detail->bGuidDescriptorType) {
 177                         case 0:                 /* "SAFE" */
 178                                 if (detail->bLength != (sizeof *detail + 2))
 179                                         goto bad_detail;
 180                                 break;
 181                         case 1:                 /* "BLAN" */
 182                                 if (detail->bLength != (sizeof *detail + 3))
 183                                         goto bad_detail;
 184                                 break;
 185                         default:
 186                                 goto bad_detail;
 187                         }
 188
 189                         /* assuming we either noticed BLAN already, or will
 190                          * find it soon, there are some data bytes here:
 191                          *  - bmNetworkCapabilities (unused)
 192                          *  - bmDataCapabilities (bits, see below)
 193                          *  - bPad (ignored, for PADAFTER -- BLAN-only)
 194                          * bits are:
 195                          *  - 0x01 -- Zaurus framing (add CRC)
 196                          *  - 0x02 -- PADBEFORE (CRC includes some padding)
 197                          *  - 0x04 -- PADAFTER (some padding after CRC)
 198                          *  - 0x08 -- "fermat" packet mangling (for hw bugs)
 199                          * the PADBEFORE appears not to matter; we interop
 200                          * with devices that use it and those that don't.
 201                          */
 202                         if ((detail->bDetailData[1] & ~0x02) != 0x01) {
 203                                 /* bmDataCapabilities == 0 would be fine too,
 204                                  * but framing is minidriver-coupled for now.
 205                                  */
 206 bad_detail:
 207                                 dev_dbg(&intf->dev,
 208                                                 "bad MDLM detail, %d %d %d\n",
 209                                                 detail->bLength,
 210                                                 detail->bDetailData[0],
 211                                                 detail->bDetailData[2]);
 212                                 goto bad_desc;
 213                         }
 214
 215                         /* same extra framing as for non-BLAN mode */
 216                         dev->net->hard_header_len += 6;
 217                         dev->rx_urb_size = dev->net->hard_header_len
 218                                         + dev->net->mtu;
 219                         break;
 220                 }
 221 next_desc:
 222                 len -= buf [0]; /* bLength */
 223                 buf += buf [0];
 224         }
 225
 226         if (!desc || !detail) {
 227                 dev_dbg(&intf->dev, "missing cdc mdlm %s%sdescriptor\n",
 228                         desc ? "" : "func ",
 229                         detail ? "" : "detail ");
 230                 goto bad_desc;
 231         }
 232
 233         /* There's probably a CDC Ethernet descriptor there, but we can't
 234          * rely on the Ethernet address it provides since not all vendors
 235          * bother to make it unique.  Likewise there's no point in tracking
 236          * of the CDC event notifications.
 237          */
 238         return usbnet_get_endpoints(dev, intf);
 239
 240 bad_desc:
 241         dev_info(&dev->udev->dev, "unsupported MDLM descriptors\n");
 242         return -ENODEV;
 243 }
 244
 245 static const struct driver_info bogus_mdlm_info = {
 246         .description =  "pseudo-MDLM (BLAN) device",
 247         .flags =        FLAG_POINTTOPOINT | FLAG_FRAMING_Z,
 248         .check_connect = always_connected,
 249         .tx_fixup =     zaurus_tx_fixup,
 250         .bind =         blan_mdlm_bind,
 251 };
 252
 253 static const struct usb_device_id       products [] = {
 254 #define ZAURUS_MASTER_INTERFACE \
 255         .bInterfaceClass        = USB_CLASS_COMM, \
 256         .bInterfaceSubClass     = USB_CDC_SUBCLASS_ETHERNET, \
 257         .bInterfaceProtocol     = USB_CDC_PROTO_NONE
 258
 259 /* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
 260 {
 261         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 262                           | USB_DEVICE_ID_MATCH_DEVICE,
 263         .idVendor               = 0x04DD,
 264         .idProduct              = 0x8004,
 265         ZAURUS_MASTER_INTERFACE,
 266         .driver_info = ZAURUS_STRONGARM_INFO,
 267 },
 268
 269 /* PXA-2xx based models are also lying-about-cdc.  If you add any
 270  * more devices that claim to be CDC Ethernet, make sure they get
 271  * added to the blacklist in cdc_ether too.
 272  *
 273  * NOTE:  OpenZaurus versions with 2.6 kernels won't use these entries,
 274  * unlike the older ones with 2.4 "embedix" kernels.
 275  */
 276 {
 277         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 278                           | USB_DEVICE_ID_MATCH_DEVICE,
 279         .idVendor               = 0x04DD,
 280         .idProduct              = 0x8005,       /* A-300 */
 281         ZAURUS_MASTER_INTERFACE,
 282         .driver_info = ZAURUS_PXA_INFO,
 283 }, {
 284         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 285                           | USB_DEVICE_ID_MATCH_DEVICE,
 286         .idVendor               = 0x04DD,
 287         .idProduct              = 0x8006,       /* B-500/SL-5600 */
 288         ZAURUS_MASTER_INTERFACE,
 289         .driver_info = ZAURUS_PXA_INFO,
 290 }, {
 291         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 292                   | USB_DEVICE_ID_MATCH_DEVICE,
 293         .idVendor               = 0x04DD,
 294         .idProduct              = 0x8007,       /* C-700 */
 295         ZAURUS_MASTER_INTERFACE,
 296         .driver_info = ZAURUS_PXA_INFO,
 297 }, {
 298         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 299                  | USB_DEVICE_ID_MATCH_DEVICE,
 300         .idVendor               = 0x04DD,
 301         .idProduct              = 0x9031,       /* C-750 C-760 */
 302         ZAURUS_MASTER_INTERFACE,
 303         .driver_info = ZAURUS_PXA_INFO,
 304 }, {
 305         /* C-750/C-760/C-860/SL-C3000 PDA in MDLM mode */
 306         USB_DEVICE_AND_INTERFACE_INFO(0x04DD, 0x9031, USB_CLASS_COMM,
 307                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 308         .driver_info = (unsigned long) &bogus_mdlm_info,
 309 }, {
 310         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 311                  | USB_DEVICE_ID_MATCH_DEVICE,
 312         .idVendor               = 0x04DD,
 313         .idProduct              = 0x9032,       /* SL-6000 */
 314         ZAURUS_MASTER_INTERFACE,
 315         .driver_info = ZAURUS_PXA_INFO,
 316 }, {
 317         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 318                  | USB_DEVICE_ID_MATCH_DEVICE,
 319         .idVendor               = 0x04DD,
 320         /* reported with some C860 units */
 321         .idProduct              = 0x9050,       /* C-860 */
 322         ZAURUS_MASTER_INTERFACE,
 323         .driver_info = ZAURUS_PXA_INFO,
 324 },
 325 {
 326         /* Motorola Rokr E6 */
 327         USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6027, USB_CLASS_COMM,
 328                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 329         .driver_info = (unsigned long) &bogus_mdlm_info,
 330 }, {
 331         /* Motorola MOTOMAGX phones */
 332         USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM,
 333                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 334         .driver_info = (unsigned long) &bogus_mdlm_info,
 335 },
 336
 337 /* Olympus has some models with a Zaurus-compatible option.
 338  * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
 339  */
 340 {
 341         .match_flags    =   USB_DEVICE_ID_MATCH_INT_INFO
 342                  | USB_DEVICE_ID_MATCH_DEVICE,
 343         .idVendor               = 0x07B4,
 344         .idProduct              = 0x0F02,       /* R-1000 */
 345         ZAURUS_MASTER_INTERFACE,
 346         .driver_info = OLYMPUS_MXL_INFO,
 347 },
 348
 349 /* Logitech Harmony 900 - uses the pseudo-MDLM (BLAN) driver */
 350 {
 351         USB_DEVICE_AND_INTERFACE_INFO(0x046d, 0xc11f, USB_CLASS_COMM,
 352                         USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
 353         .driver_info = (unsigned long) &bogus_mdlm_info,
 354 },
 355         { },            // END
 356 };
 357 MODULE_DEVICE_TABLE(usb, products);
 358
 359 static struct usb_driver zaurus_driver = {
 360         .name =         "zaurus",
 361         .id_table =     products,
 362         .probe =        usbnet_probe,
 363         .disconnect =   usbnet_disconnect,
 364         .suspend =      usbnet_suspend,
 365         .resume =       usbnet_resume,
 366         .disable_hub_initiated_lpm = 1,
 367 };
 368
 369 module_usb_driver(zaurus_driver);
 370
 371 MODULE_AUTHOR("Pavel Machek, David Brownell");
 372 MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
 373 MODULE_LICENSE("GPL");