?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / net / wan / n2.c
blobf9e7fc7e9978858114775b0621dde836056c55e1
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * SDL Inc. RISCom/N2 synchronous serial card driver for Linux
4 *
5 * Copyright (C) 1998-2003 Krzysztof Halasa <khc@pm.waw.pl>
6 *
7 * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>
8 *
9 * Note: integrated CSU/DSU/DDS are not supported by this driver
10 *
11 * Sources of information:
12 * Hitachi HD64570 SCA User's Manual
13 * SDL Inc. PPP/HDLC/CISCO driver
14 */
15
16 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
17
18 #include <linux/module.h>
19 #include <linux/kernel.h>
20 #include <linux/capability.h>
21 #include <linux/slab.h>
22 #include <linux/types.h>
23 #include <linux/fcntl.h>
24 #include <linux/in.h>
25 #include <linux/string.h>
26 #include <linux/errno.h>
27 #include <linux/init.h>
28 #include <linux/ioport.h>
29 #include <linux/moduleparam.h>
30 #include <linux/netdevice.h>
31 #include <linux/hdlc.h>
32 #include <asm/io.h>
33 #include "hd64570.h"
34
35
36 static const char* version = "SDL RISCom/N2 driver version: 1.15";
37 static const char* devname = "RISCom/N2";
38
39 #undef DEBUG_PKT
40 #define DEBUG_RINGS
41
42 #define USE_WINDOWSIZE 16384
43 #define USE_BUS16BITS 1
44 #define CLOCK_BASE 9830400 /* 9.8304 MHz */
45 #define MAX_PAGES 16 /* 16 RAM pages at max */
46 #define MAX_RAM_SIZE 0x80000 /* 512 KB */
47 #if MAX_RAM_SIZE > MAX_PAGES * USE_WINDOWSIZE
48 #undef MAX_RAM_SIZE
49 #define MAX_RAM_SIZE (MAX_PAGES * USE_WINDOWSIZE)
50 #endif
51 #define N2_IOPORTS 0x10
52 #define NEED_DETECT_RAM
53 #define NEED_SCA_MSCI_INTR
54 #define MAX_TX_BUFFERS 10
55
56 static char *hw; /* pointer to hw=xxx command line string */
57
58 /* RISCom/N2 Board Registers */
59
60 /* PC Control Register */
61 #define N2_PCR 0
62 #define PCR_RUNSCA 1 /* Run 64570 */
63 #define PCR_VPM 2 /* Enable VPM - needed if using RAM above 1 MB */
64 #define PCR_ENWIN 4 /* Open window */
65 #define PCR_BUS16 8 /* 16-bit bus */
66
67
68 /* Memory Base Address Register */
69 #define N2_BAR 2
70
71
72 /* Page Scan Register */
73 #define N2_PSR 4
74 #define WIN16K 0x00
75 #define WIN32K 0x20
76 #define WIN64K 0x40
77 #define PSR_WINBITS 0x60
78 #define PSR_DMAEN 0x80
79 #define PSR_PAGEBITS 0x0F
80
81
82 /* Modem Control Reg */
83 #define N2_MCR 6
84 #define CLOCK_OUT_PORT1 0x80
85 #define CLOCK_OUT_PORT0 0x40
86 #define TX422_PORT1 0x20
87 #define TX422_PORT0 0x10
88 #define DSR_PORT1 0x08
89 #define DSR_PORT0 0x04
90 #define DTR_PORT1 0x02
91 #define DTR_PORT0 0x01
92
93
94 typedef struct port_s {
95 struct net_device *dev;
96 struct card_s *card;
97 spinlock_t lock; /* TX lock */
98 sync_serial_settings settings;
99 int valid; /* port enabled */
100 int rxpart; /* partial frame received, next frame invalid*/
101 unsigned short encoding;
102 unsigned short parity;
103 u16 rxin; /* rx ring buffer 'in' pointer */
104 u16 txin; /* tx ring buffer 'in' and 'last' pointers */
105 u16 txlast;
106 u8 rxs, txs, tmc; /* SCA registers */
107 u8 phy_node; /* physical port # - 0 or 1 */
108 u8 log_node; /* logical port # */
109 }port_t;
110
111
112
113 typedef struct card_s {
114 u8 __iomem *winbase; /* ISA window base address */
115 u32 phy_winbase; /* ISA physical base address */
116 u32 ram_size; /* number of bytes */
117 u16 io; /* IO Base address */
118 u16 buff_offset; /* offset of first buffer of first channel */
119 u16 rx_ring_buffers; /* number of buffers in a ring */
120 u16 tx_ring_buffers;
121 u8 irq; /* IRQ (3-15) */
122
123 port_t ports[2];
124 struct card_s *next_card;
125 }card_t;
126
127
128 static card_t *first_card;
129 static card_t **new_card = &first_card;
130
131
132 #define sca_reg(reg, card) (0x8000 | (card)->io | \
133 ((reg) & 0x0F) | (((reg) & 0xF0) << 6))
134 #define sca_in(reg, card) inb(sca_reg(reg, card))
135 #define sca_out(value, reg, card) outb(value, sca_reg(reg, card))
136 #define sca_inw(reg, card) inw(sca_reg(reg, card))
137 #define sca_outw(value, reg, card) outw(value, sca_reg(reg, card))
138
139 #define port_to_card(port) ((port)->card)
140 #define log_node(port) ((port)->log_node)
141 #define phy_node(port) ((port)->phy_node)
142 #define winsize(card) (USE_WINDOWSIZE)
143 #define winbase(card) ((card)->winbase)
144 #define get_port(card, port) ((card)->ports[port].valid ? \
145 &(card)->ports[port] : NULL)
146
147
148 static __inline__ u8 sca_get_page(card_t *card)
149 {
150 return inb(card->io + N2_PSR) & PSR_PAGEBITS;
151 }
152
153
154 static __inline__ void openwin(card_t *card, u8 page)
155 {
156 u8 psr = inb(card->io + N2_PSR);
157 outb((psr & ~PSR_PAGEBITS) | page, card->io + N2_PSR);
158 }
159
160
161 #include "hd64570.c"
162
163
164 static void n2_set_iface(port_t *port)
165 {
166 card_t *card = port->card;
167 int io = card->io;
168 u8 mcr = inb(io + N2_MCR);
169 u8 msci = get_msci(port);
170 u8 rxs = port->rxs & CLK_BRG_MASK;
171 u8 txs = port->txs & CLK_BRG_MASK;
172
173 switch(port->settings.clock_type) {
174 case CLOCK_INT:
175 mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
176 rxs |= CLK_BRG_RX; /* BRG output */
177 txs |= CLK_RXCLK_TX; /* RX clock */
178 break;
179
180 case CLOCK_TXINT:
181 mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
182 rxs |= CLK_LINE_RX; /* RXC input */
183 txs |= CLK_BRG_TX; /* BRG output */
184 break;
185
186 case CLOCK_TXFROMRX:
187 mcr |= port->phy_node ? CLOCK_OUT_PORT1 : CLOCK_OUT_PORT0;
188 rxs |= CLK_LINE_RX; /* RXC input */
189 txs |= CLK_RXCLK_TX; /* RX clock */
190 break;
191
192 default: /* Clock EXTernal */
193 mcr &= port->phy_node ? ~CLOCK_OUT_PORT1 : ~CLOCK_OUT_PORT0;
194 rxs |= CLK_LINE_RX; /* RXC input */
195 txs |= CLK_LINE_TX; /* TXC input */
196 }
197
198 outb(mcr, io + N2_MCR);
199 port->rxs = rxs;
200 port->txs = txs;
201 sca_out(rxs, msci + RXS, card);
202 sca_out(txs, msci + TXS, card);
203 sca_set_port(port);
204 }
205
206
207
208 static int n2_open(struct net_device *dev)
209 {
210 port_t *port = dev_to_port(dev);
211 int io = port->card->io;
212 u8 mcr = inb(io + N2_MCR) | (port->phy_node ? TX422_PORT1:TX422_PORT0);
213 int result;
214
215 result = hdlc_open(dev);
216 if (result)
217 return result;
218
219 mcr &= port->phy_node ? ~DTR_PORT1 : ~DTR_PORT0; /* set DTR ON */
220 outb(mcr, io + N2_MCR);
221
222 outb(inb(io + N2_PCR) | PCR_ENWIN, io + N2_PCR); /* open window */
223 outb(inb(io + N2_PSR) | PSR_DMAEN, io + N2_PSR); /* enable dma */
224 sca_open(dev);
225 n2_set_iface(port);
226 return 0;
227 }
228
229
230
231 static int n2_close(struct net_device *dev)
232 {
233 port_t *port = dev_to_port(dev);
234 int io = port->card->io;
235 u8 mcr = inb(io+N2_MCR) | (port->phy_node ? TX422_PORT1 : TX422_PORT0);
236
237 sca_close(dev);
238 mcr |= port->phy_node ? DTR_PORT1 : DTR_PORT0; /* set DTR OFF */
239 outb(mcr, io + N2_MCR);
240 hdlc_close(dev);
241 return 0;
242 }
243
244
245
246 static int n2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
247 {
248 const size_t size = sizeof(sync_serial_settings);
249 sync_serial_settings new_line;
250 sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
251 port_t *port = dev_to_port(dev);
252
253 #ifdef DEBUG_RINGS
254 if (cmd == SIOCDEVPRIVATE) {
255 sca_dump_rings(dev);
256 return 0;
257 }
258 #endif
259 if (cmd != SIOCWANDEV)
260 return hdlc_ioctl(dev, ifr, cmd);
261
262 switch(ifr->ifr_settings.type) {
263 case IF_GET_IFACE:
264 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
265 if (ifr->ifr_settings.size < size) {
266 ifr->ifr_settings.size = size; /* data size wanted */
267 return -ENOBUFS;
268 }
269 if (copy_to_user(line, &port->settings, size))
270 return -EFAULT;
271 return 0;
272
273 case IF_IFACE_SYNC_SERIAL:
274 if(!capable(CAP_NET_ADMIN))
275 return -EPERM;
276
277 if (copy_from_user(&new_line, line, size))
278 return -EFAULT;
279
280 if (new_line.clock_type != CLOCK_EXT &&
281 new_line.clock_type != CLOCK_TXFROMRX &&
282 new_line.clock_type != CLOCK_INT &&
283 new_line.clock_type != CLOCK_TXINT)
284 return -EINVAL; /* No such clock setting */
285
286 if (new_line.loopback != 0 && new_line.loopback != 1)
287 return -EINVAL;
288
289 memcpy(&port->settings, &new_line, size); /* Update settings */
290 n2_set_iface(port);
291 return 0;
292
293 default:
294 return hdlc_ioctl(dev, ifr, cmd);
295 }
296 }
297
298
299
300 static void n2_destroy_card(card_t *card)
301 {
302 int cnt;
303
304 for (cnt = 0; cnt < 2; cnt++)
305 if (card->ports[cnt].card) {
306 struct net_device *dev = port_to_dev(&card->ports[cnt]);
307 unregister_hdlc_device(dev);
308 }
309
310 if (card->irq)
311 free_irq(card->irq, card);
312
313 if (card->winbase) {
314 iounmap(card->winbase);
315 release_mem_region(card->phy_winbase, USE_WINDOWSIZE);
316 }
317
318 if (card->io)
319 release_region(card->io, N2_IOPORTS);
320 if (card->ports[0].dev)
321 free_netdev(card->ports[0].dev);
322 if (card->ports[1].dev)
323 free_netdev(card->ports[1].dev);
324 kfree(card);
325 }
326
327 static const struct net_device_ops n2_ops = {
328 .ndo_open = n2_open,
329 .ndo_stop = n2_close,
330 .ndo_start_xmit = hdlc_start_xmit,
331 .ndo_do_ioctl = n2_ioctl,
332 };
333
334 static int __init n2_run(unsigned long io, unsigned long irq,
335 unsigned long winbase, long valid0, long valid1)
336 {
337 card_t *card;
338 u8 cnt, pcr;
339 int i;
340
341 if (io < 0x200 || io > 0x3FF || (io % N2_IOPORTS) != 0) {
342 pr_err("invalid I/O port value\n");
343 return -ENODEV;
344 }
345
346 if (irq < 3 || irq > 15 || irq == 6) /* FIXME */ {
347 pr_err("invalid IRQ value\n");
348 return -ENODEV;
349 }
350
351 if (winbase < 0xA0000 || winbase > 0xFFFFF || (winbase & 0xFFF) != 0) {
352 pr_err("invalid RAM value\n");
353 return -ENODEV;
354 }
355
356 card = kzalloc(sizeof(card_t), GFP_KERNEL);
357 if (card == NULL)
358 return -ENOBUFS;
359
360 card->ports[0].dev = alloc_hdlcdev(&card->ports[0]);
361 card->ports[1].dev = alloc_hdlcdev(&card->ports[1]);
362 if (!card->ports[0].dev || !card->ports[1].dev) {
363 pr_err("unable to allocate memory\n");
364 n2_destroy_card(card);
365 return -ENOMEM;
366 }
367
368 if (!request_region(io, N2_IOPORTS, devname)) {
369 pr_err("I/O port region in use\n");
370 n2_destroy_card(card);
371 return -EBUSY;
372 }
373 card->io = io;
374
375 if (request_irq(irq, sca_intr, 0, devname, card)) {
376 pr_err("could not allocate IRQ\n");
377 n2_destroy_card(card);
378 return -EBUSY;
379 }
380 card->irq = irq;
381
382 if (!request_mem_region(winbase, USE_WINDOWSIZE, devname)) {
383 pr_err("could not request RAM window\n");
384 n2_destroy_card(card);
385 return -EBUSY;
386 }
387 card->phy_winbase = winbase;
388 card->winbase = ioremap(winbase, USE_WINDOWSIZE);
389 if (!card->winbase) {
390 pr_err("ioremap() failed\n");
391 n2_destroy_card(card);
392 return -EFAULT;
393 }
394
395 outb(0, io + N2_PCR);
396 outb(winbase >> 12, io + N2_BAR);
397
398 switch (USE_WINDOWSIZE) {
399 case 16384:
400 outb(WIN16K, io + N2_PSR);
401 break;
402
403 case 32768:
404 outb(WIN32K, io + N2_PSR);
405 break;
406
407 case 65536:
408 outb(WIN64K, io + N2_PSR);
409 break;
410
411 default:
412 pr_err("invalid window size\n");
413 n2_destroy_card(card);
414 return -ENODEV;
415 }
416
417 pcr = PCR_ENWIN | PCR_VPM | (USE_BUS16BITS ? PCR_BUS16 : 0);
418 outb(pcr, io + N2_PCR);
419
420 card->ram_size = sca_detect_ram(card, card->winbase, MAX_RAM_SIZE);
421
422 /* number of TX + RX buffers for one port */
423 i = card->ram_size / ((valid0 + valid1) * (sizeof(pkt_desc) +
424 HDLC_MAX_MRU));
425
426 card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
427 card->rx_ring_buffers = i - card->tx_ring_buffers;
428
429 card->buff_offset = (valid0 + valid1) * sizeof(pkt_desc) *
430 (card->tx_ring_buffers + card->rx_ring_buffers);
431
432 pr_info("RISCom/N2 %u KB RAM, IRQ%u, using %u TX + %u RX packets rings\n",
433 card->ram_size / 1024, card->irq,
434 card->tx_ring_buffers, card->rx_ring_buffers);
435
436 if (card->tx_ring_buffers < 1) {
437 pr_err("RAM test failed\n");
438 n2_destroy_card(card);
439 return -EIO;
440 }
441
442 pcr |= PCR_RUNSCA; /* run SCA */
443 outb(pcr, io + N2_PCR);
444 outb(0, io + N2_MCR);
445
446 sca_init(card, 0);
447 for (cnt = 0; cnt < 2; cnt++) {
448 port_t *port = &card->ports[cnt];
449 struct net_device *dev = port_to_dev(port);
450 hdlc_device *hdlc = dev_to_hdlc(dev);
451
452 if ((cnt == 0 && !valid0) || (cnt == 1 && !valid1))
453 continue;
454
455 port->phy_node = cnt;
456 port->valid = 1;
457
458 if ((cnt == 1) && valid0)
459 port->log_node = 1;
460
461 spin_lock_init(&port->lock);
462 dev->irq = irq;
463 dev->mem_start = winbase;
464 dev->mem_end = winbase + USE_WINDOWSIZE - 1;
465 dev->tx_queue_len = 50;
466 dev->netdev_ops = &n2_ops;
467 hdlc->attach = sca_attach;
468 hdlc->xmit = sca_xmit;
469 port->settings.clock_type = CLOCK_EXT;
470 port->card = card;
471
472 if (register_hdlc_device(dev)) {
473 pr_warn("unable to register hdlc device\n");
474 port->card = NULL;
475 n2_destroy_card(card);
476 return -ENOBUFS;
477 }
478 sca_init_port(port); /* Set up SCA memory */
479
480 netdev_info(dev, "RISCom/N2 node %d\n", port->phy_node);
481 }
482
483 *new_card = card;
484 new_card = &card->next_card;
485
486 return 0;
487 }
488
489
490
491 static int __init n2_init(void)
492 {
493 if (hw==NULL) {
494 #ifdef MODULE
495 pr_info("no card initialized\n");
496 #endif
497 return -EINVAL; /* no parameters specified, abort */
498 }
499
500 pr_info("%s\n", version);
501
502 do {
503 unsigned long io, irq, ram;
504 long valid[2] = { 0, 0 }; /* Default = both ports disabled */
505
506 io = simple_strtoul(hw, &hw, 0);
507
508 if (*hw++ != ',')
509 break;
510 irq = simple_strtoul(hw, &hw, 0);
511
512 if (*hw++ != ',')
513 break;
514 ram = simple_strtoul(hw, &hw, 0);
515
516 if (*hw++ != ',')
517 break;
518 while(1) {
519 if (*hw == '0' && !valid[0])
520 valid[0] = 1; /* Port 0 enabled */
521 else if (*hw == '1' && !valid[1])
522 valid[1] = 1; /* Port 1 enabled */
523 else
524 break;
525 hw++;
526 }
527
528 if (!valid[0] && !valid[1])
529 break; /* at least one port must be used */
530
531 if (*hw == ':' || *hw == '\x0')
532 n2_run(io, irq, ram, valid[0], valid[1]);
533
534 if (*hw == '\x0')
535 return first_card ? 0 : -EINVAL;
536 }while(*hw++ == ':');
537
538 pr_err("invalid hardware parameters\n");
539 return first_card ? 0 : -EINVAL;
540 }
541
542
543 static void __exit n2_cleanup(void)
544 {
545 card_t *card = first_card;
546
547 while (card) {
548 card_t *ptr = card;
549 card = card->next_card;
550 n2_destroy_card(ptr);
551 }
552 }
553
554
555 module_init(n2_init);
556 module_exit(n2_cleanup);
557
558 MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
559 MODULE_DESCRIPTION("RISCom/N2 serial port driver");
560 MODULE_LICENSE("GPL v2");
561 module_param(hw, charp, 0444);
562 MODULE_PARM_DESC(hw, "io,irq,ram,ports:io,irq,...");
Linux with added FPC-III support