1 // SPDX-License-Identifier: GPL-2.0-only
3 * Copyright (C) 2015 Jakub Kicinski <kubakici@wp.pl>
6 #include <linux/kernel.h>
7 #include <linux/module.h>
12 #include "../mt76x02_usb.h"
14 static struct usb_device_id mt76x0_device_table
[] = {
15 { USB_DEVICE(0x148F, 0x7610) }, /* MT7610U */
16 { USB_DEVICE(0x13B1, 0x003E) }, /* Linksys AE6000 */
17 { USB_DEVICE(0x0E8D, 0x7610) }, /* Sabrent NTWLAC */
18 { USB_DEVICE(0x7392, 0xa711) }, /* Edimax 7711mac */
19 { USB_DEVICE(0x7392, 0xb711) }, /* Edimax / Elecom */
20 { USB_DEVICE(0x148f, 0x761a) }, /* TP-Link TL-WDN5200 */
21 { USB_DEVICE(0x148f, 0x760a) }, /* TP-Link unknown */
22 { USB_DEVICE(0x0b05, 0x17d1) }, /* Asus USB-AC51 */
23 { USB_DEVICE(0x0b05, 0x17db) }, /* Asus USB-AC50 */
24 { USB_DEVICE(0x0df6, 0x0075) }, /* Sitecom WLA-3100 */
25 { USB_DEVICE(0x2019, 0xab31) }, /* Planex GW-450D */
26 { USB_DEVICE(0x2001, 0x3d02) }, /* D-LINK DWA-171 rev B1 */
27 { USB_DEVICE(0x0586, 0x3425) }, /* Zyxel NWD6505 */
28 { USB_DEVICE(0x07b8, 0x7610) }, /* AboCom AU7212 */
29 { USB_DEVICE(0x04bb, 0x0951) }, /* I-O DATA WN-AC433UK */
30 { USB_DEVICE(0x057c, 0x8502) }, /* AVM FRITZ!WLAN USB Stick AC 430 */
31 { USB_DEVICE(0x293c, 0x5702) }, /* Comcast Xfinity KXW02AAA */
32 { USB_DEVICE(0x20f4, 0x806b) }, /* TRENDnet TEW-806UBH */
33 { USB_DEVICE(0x7392, 0xc711) }, /* Devolo Wifi ac Stick */
34 { USB_DEVICE(0x0df6, 0x0079) }, /* Sitecom Europe B.V. ac Stick */
35 { USB_DEVICE(0x2357, 0x0123) }, /* TP-LINK T2UHP */
36 /* TP-LINK Archer T1U */
37 { USB_DEVICE(0x2357, 0x0105), .driver_info
= 1, },
39 { USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7630, 0xff, 0x2, 0xff)},
41 { USB_DEVICE_AND_INTERFACE_INFO(0x0E8D, 0x7650, 0xff, 0x2, 0xff)},
45 static void mt76x0_init_usb_dma(struct mt76x02_dev
*dev
)
49 val
= mt76_rr(dev
, MT_USB_DMA_CFG
);
51 val
|= MT_USB_DMA_CFG_RX_BULK_EN
|
52 MT_USB_DMA_CFG_TX_BULK_EN
;
54 /* disable AGGR_BULK_RX in order to receive one
55 * frame in each rx urb and avoid copies
57 val
&= ~MT_USB_DMA_CFG_RX_BULK_AGG_EN
;
58 mt76_wr(dev
, MT_USB_DMA_CFG
, val
);
60 val
= mt76_rr(dev
, MT_COM_REG0
);
62 dev_dbg(dev
->mt76
.dev
, "MCU not ready\n");
64 val
= mt76_rr(dev
, MT_USB_DMA_CFG
);
66 val
|= MT_USB_DMA_CFG_RX_DROP_OR_PAD
;
67 mt76_wr(dev
, MT_USB_DMA_CFG
, val
);
68 val
&= ~MT_USB_DMA_CFG_RX_DROP_OR_PAD
;
69 mt76_wr(dev
, MT_USB_DMA_CFG
, val
);
72 static void mt76x0u_cleanup(struct mt76x02_dev
*dev
)
74 clear_bit(MT76_STATE_INITIALIZED
, &dev
->mt76
.state
);
75 mt76x0_chip_onoff(dev
, false, false);
76 mt76u_queues_deinit(&dev
->mt76
);
79 static void mt76x0u_stop(struct ieee80211_hw
*hw
)
81 struct mt76x02_dev
*dev
= hw
->priv
;
83 clear_bit(MT76_STATE_RUNNING
, &dev
->mt76
.state
);
84 cancel_delayed_work_sync(&dev
->cal_work
);
85 cancel_delayed_work_sync(&dev
->mt76
.mac_work
);
86 mt76u_stop_tx(&dev
->mt76
);
87 mt76x02u_exit_beacon_config(dev
);
89 if (test_bit(MT76_REMOVED
, &dev
->mt76
.state
))
92 if (!mt76_poll(dev
, MT_USB_DMA_CFG
, MT_USB_DMA_CFG_TX_BUSY
, 0, 1000))
93 dev_warn(dev
->mt76
.dev
, "TX DMA did not stop\n");
97 if (!mt76_poll(dev
, MT_USB_DMA_CFG
, MT_USB_DMA_CFG_RX_BUSY
, 0, 1000))
98 dev_warn(dev
->mt76
.dev
, "RX DMA did not stop\n");
101 static int mt76x0u_start(struct ieee80211_hw
*hw
)
103 struct mt76x02_dev
*dev
= hw
->priv
;
106 ret
= mt76x02u_mac_start(dev
);
110 mt76x0_phy_calibrate(dev
, true);
111 ieee80211_queue_delayed_work(dev
->mt76
.hw
, &dev
->mt76
.mac_work
,
112 MT_MAC_WORK_INTERVAL
);
113 ieee80211_queue_delayed_work(dev
->mt76
.hw
, &dev
->cal_work
,
114 MT_CALIBRATE_INTERVAL
);
115 set_bit(MT76_STATE_RUNNING
, &dev
->mt76
.state
);
119 static const struct ieee80211_ops mt76x0u_ops
= {
121 .start
= mt76x0u_start
,
122 .stop
= mt76x0u_stop
,
123 .add_interface
= mt76x02_add_interface
,
124 .remove_interface
= mt76x02_remove_interface
,
125 .config
= mt76x0_config
,
126 .configure_filter
= mt76x02_configure_filter
,
127 .bss_info_changed
= mt76x02_bss_info_changed
,
128 .sta_state
= mt76_sta_state
,
129 .set_key
= mt76x02_set_key
,
130 .conf_tx
= mt76x02_conf_tx
,
131 .sw_scan_start
= mt76_sw_scan
,
132 .sw_scan_complete
= mt76x02_sw_scan_complete
,
133 .ampdu_action
= mt76x02_ampdu_action
,
134 .sta_rate_tbl_update
= mt76x02_sta_rate_tbl_update
,
135 .set_rts_threshold
= mt76x02_set_rts_threshold
,
136 .wake_tx_queue
= mt76_wake_tx_queue
,
137 .get_txpower
= mt76_get_txpower
,
138 .get_survey
= mt76_get_survey
,
139 .set_tim
= mt76_set_tim
,
140 .release_buffered_frames
= mt76_release_buffered_frames
,
141 .get_antenna
= mt76_get_antenna
,
144 static int mt76x0u_init_hardware(struct mt76x02_dev
*dev
, bool reset
)
148 mt76x0_chip_onoff(dev
, true, reset
);
150 if (!mt76x02_wait_for_mac(&dev
->mt76
))
153 err
= mt76x0u_mcu_init(dev
);
157 mt76x0_init_usb_dma(dev
);
158 err
= mt76x0_init_hardware(dev
);
162 mt76x02u_init_beacon_config(dev
);
164 mt76_rmw(dev
, MT_US_CYC_CFG
, MT_US_CYC_CNT
, 0x1e);
165 mt76_wr(dev
, MT_TXOP_CTRL_CFG
,
166 FIELD_PREP(MT_TXOP_TRUN_EN
, 0x3f) |
167 FIELD_PREP(MT_TXOP_EXT_CCA_DLY
, 0x58));
172 static int mt76x0u_register_device(struct mt76x02_dev
*dev
)
174 struct ieee80211_hw
*hw
= dev
->mt76
.hw
;
177 err
= mt76u_alloc_queues(&dev
->mt76
);
181 err
= mt76x0u_init_hardware(dev
, true);
185 err
= mt76x0_register_device(dev
);
189 /* check hw sg support in order to enable AMSDU */
190 if (dev
->mt76
.usb
.sg_en
)
191 hw
->max_tx_fragments
= MT_TX_SG_MAX_SIZE
;
193 hw
->max_tx_fragments
= 1;
195 set_bit(MT76_STATE_INITIALIZED
, &dev
->mt76
.state
);
200 mt76x0u_cleanup(dev
);
204 static int mt76x0u_probe(struct usb_interface
*usb_intf
,
205 const struct usb_device_id
*id
)
207 static const struct mt76_driver_ops drv_ops
= {
208 .drv_flags
= MT_DRV_SW_RX_AIRTIME
,
209 .survey_flags
= SURVEY_INFO_TIME_TX
,
210 .update_survey
= mt76x02_update_channel
,
211 .tx_prepare_skb
= mt76x02u_tx_prepare_skb
,
212 .tx_complete_skb
= mt76x02u_tx_complete_skb
,
213 .tx_status_data
= mt76x02_tx_status_data
,
214 .rx_skb
= mt76x02_queue_rx_skb
,
215 .sta_ps
= mt76x02_sta_ps
,
216 .sta_add
= mt76x02_sta_add
,
217 .sta_remove
= mt76x02_sta_remove
,
219 struct usb_device
*usb_dev
= interface_to_usbdev(usb_intf
);
220 struct mt76x02_dev
*dev
;
221 struct mt76_dev
*mdev
;
225 mdev
= mt76_alloc_device(&usb_intf
->dev
, sizeof(*dev
), &mt76x0u_ops
,
230 dev
= container_of(mdev
, struct mt76x02_dev
, mt76
);
231 mutex_init(&dev
->phy_mutex
);
233 /* Quirk for Archer T1U */
237 usb_dev
= usb_get_dev(usb_dev
);
238 usb_reset_device(usb_dev
);
240 usb_set_intfdata(usb_intf
, dev
);
242 mt76x02u_init_mcu(mdev
);
243 ret
= mt76u_init(mdev
, usb_intf
);
247 /* Disable the HW, otherwise MCU fail to initialize on hot reboot */
248 mt76x0_chip_onoff(dev
, false, false);
250 if (!mt76x02_wait_for_mac(mdev
)) {
255 mdev
->rev
= mt76_rr(dev
, MT_ASIC_VERSION
);
256 mac_rev
= mt76_rr(dev
, MT_MAC_CSR0
);
257 dev_info(mdev
->dev
, "ASIC revision: %08x MAC revision: %08x\n",
259 if (!is_mt76x0(dev
)) {
264 /* Note: vendor driver skips this check for MT76X0U */
265 if (!(mt76_rr(dev
, MT_EFUSE_CTRL
) & MT_EFUSE_CTRL_SEL
))
266 dev_warn(mdev
->dev
, "Warning: eFUSE not present\n");
268 ret
= mt76x0u_register_device(dev
);
275 usb_set_intfdata(usb_intf
, NULL
);
276 usb_put_dev(interface_to_usbdev(usb_intf
));
277 mt76u_deinit(&dev
->mt76
);
279 ieee80211_free_hw(mdev
->hw
);
283 static void mt76x0_disconnect(struct usb_interface
*usb_intf
)
285 struct mt76x02_dev
*dev
= usb_get_intfdata(usb_intf
);
286 bool initialized
= test_bit(MT76_STATE_INITIALIZED
, &dev
->mt76
.state
);
291 ieee80211_unregister_hw(dev
->mt76
.hw
);
292 mt76x0u_cleanup(dev
);
294 usb_set_intfdata(usb_intf
, NULL
);
295 usb_put_dev(interface_to_usbdev(usb_intf
));
297 mt76u_deinit(&dev
->mt76
);
298 ieee80211_free_hw(dev
->mt76
.hw
);
301 static int __maybe_unused
mt76x0_suspend(struct usb_interface
*usb_intf
,
304 struct mt76x02_dev
*dev
= usb_get_intfdata(usb_intf
);
306 mt76u_stop_rx(&dev
->mt76
);
307 clear_bit(MT76_STATE_MCU_RUNNING
, &dev
->mt76
.state
);
308 mt76x0_chip_onoff(dev
, false, false);
313 static int __maybe_unused
mt76x0_resume(struct usb_interface
*usb_intf
)
315 struct mt76x02_dev
*dev
= usb_get_intfdata(usb_intf
);
318 ret
= mt76u_resume_rx(&dev
->mt76
);
322 ret
= mt76x0u_init_hardware(dev
, false);
328 mt76x0u_cleanup(dev
);
332 MODULE_DEVICE_TABLE(usb
, mt76x0_device_table
);
333 MODULE_FIRMWARE(MT7610E_FIRMWARE
);
334 MODULE_FIRMWARE(MT7610U_FIRMWARE
);
335 MODULE_LICENSE("GPL");
337 static struct usb_driver mt76x0_driver
= {
338 .name
= KBUILD_MODNAME
,
339 .id_table
= mt76x0_device_table
,
340 .probe
= mt76x0u_probe
,
341 .disconnect
= mt76x0_disconnect
,
342 .suspend
= mt76x0_suspend
,
343 .resume
= mt76x0_resume
,
344 .reset_resume
= mt76x0_resume
,
346 .disable_hub_initiated_lpm
= 1,
348 module_usb_driver(mt76x0_driver
);