drivers/net/wireless/ti/wl12xx/conf.h

   1 /* SPDX-License-Identifier: GPL-2.0-only */
   2 /*
   3  * This file is part of wl12xx
   4  *
   5  * Copyright (C) 2011 Texas Instruments Inc.
   6  */
   7
   8 #ifndef __WL12XX_CONF_H__
   9 #define __WL12XX_CONF_H__
  10
  11 /* these are number of channels on the band divided by two, rounded up */
  12 #define CONF_TX_PWR_COMPENSATION_LEN_2 7
  13 #define CONF_TX_PWR_COMPENSATION_LEN_5 18
  14
  15 struct wl12xx_conf_rf {
  16         /*
  17          * Per channel power compensation for 2.4GHz
  18          *
  19          * Range: s8
  20          */
  21         u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2];
  22
  23         /*
  24          * Per channel power compensation for 5GHz
  25          *
  26          * Range: s8
  27          */
  28         u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5];
  29 };
  30
  31 struct wl12xx_priv_conf {
  32         struct wl12xx_conf_rf rf;
  33         struct conf_memory_settings mem_wl127x;
  34 };
  35
  36 enum wl12xx_sg_params {
  37         /*
  38         * Configure the min and max time BT gains the antenna
  39         * in WLAN / BT master basic rate
  40         *
  41         * Range: 0 - 255 (ms)
  42         */
  43         WL12XX_CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
  44         WL12XX_CONF_SG_ACL_BT_MASTER_MAX_BR,
  45
  46         /*
  47         * Configure the min and max time BT gains the antenna
  48         * in WLAN / BT slave basic rate
  49         *
  50         * Range: 0 - 255 (ms)
  51         */
  52         WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_BR,
  53         WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_BR,
  54
  55         /*
  56         * Configure the min and max time BT gains the antenna
  57         * in WLAN / BT master EDR
  58         *
  59         * Range: 0 - 255 (ms)
  60         */
  61         WL12XX_CONF_SG_ACL_BT_MASTER_MIN_EDR,
  62         WL12XX_CONF_SG_ACL_BT_MASTER_MAX_EDR,
  63
  64         /*
  65         * Configure the min and max time BT gains the antenna
  66         * in WLAN / BT slave EDR
  67         *
  68         * Range: 0 - 255 (ms)
  69         */
  70         WL12XX_CONF_SG_ACL_BT_SLAVE_MIN_EDR,
  71         WL12XX_CONF_SG_ACL_BT_SLAVE_MAX_EDR,
  72
  73         /*
  74         * The maximum time WLAN can gain the antenna
  75         * in WLAN PSM / BT master/slave BR
  76         *
  77         * Range: 0 - 255 (ms)
  78         */
  79         WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_BR,
  80         WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_BR,
  81
  82         /*
  83         * The maximum time WLAN can gain the antenna
  84         * in WLAN PSM / BT master/slave EDR
  85         *
  86         * Range: 0 - 255 (ms)
  87         */
  88         WL12XX_CONF_SG_ACL_WLAN_PS_MASTER_EDR,
  89         WL12XX_CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
  90
  91         /* TODO: explain these values */
  92         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
  93         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
  94         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
  95         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
  96         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
  97         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
  98         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
  99         WL12XX_CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
 100
 101         WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
 102         WL12XX_CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
 103         WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
 104         WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
 105         WL12XX_CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
 106         WL12XX_CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
 107
 108         /*
 109         * Compensation percentage of probe requests when scan initiated
 110         * during BT voice/ACL link.
 111         *
 112         * Range: 0 - 255 (%)
 113         */
 114         WL12XX_CONF_SG_AUTO_SCAN_PROBE_REQ,
 115
 116         /*
 117         * Compensation percentage of probe requests when active scan initiated
 118         * during BT voice
 119         *
 120         * Range: 0 - 255 (%)
 121         */
 122         WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
 123
 124         /*
 125         * Compensation percentage of WLAN active scan window if initiated
 126         * during BT A2DP
 127         *
 128         * Range: 0 - 1000 (%)
 129         */
 130         WL12XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
 131
 132         /*
 133         * Compensation percentage of WLAN passive scan window if initiated
 134         * during BT A2DP BR
 135         *
 136         * Range: 0 - 1000 (%)
 137         */
 138         WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_BR,
 139
 140         /*
 141         * Compensation percentage of WLAN passive scan window if initiated
 142         * during BT A2DP EDR
 143         *
 144         * Range: 0 - 1000 (%)
 145         */
 146         WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_A2DP_EDR,
 147
 148         /*
 149         * Compensation percentage of WLAN passive scan window if initiated
 150         * during BT voice
 151         *
 152         * Range: 0 - 1000 (%)
 153         */
 154         WL12XX_CONF_SG_PASSIVE_SCAN_DUR_FACTOR_HV3,
 155
 156         /* TODO: explain these values */
 157         WL12XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
 158         WL12XX_CONF_SG_BCN_HV3_COLL_THR_IN_PASSIVE_SCAN,
 159         WL12XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,
 160
 161         /*
 162         * Defines whether the SG will force WLAN host to enter/exit PSM
 163         *
 164         * Range: 1 - SG can force, 0 - host handles PSM
 165         */
 166         WL12XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,
 167
 168         /*
 169         * Defines antenna configuration (single/dual antenna)
 170         *
 171         * Range: 0 - single antenna, 1 - dual antenna
 172         */
 173         WL12XX_CONF_SG_ANTENNA_CONFIGURATION,
 174
 175         /*
 176         * The threshold (percent) of max consecutive beacon misses before
 177         * increasing priority of beacon reception.
 178         *
 179         * Range: 0 - 100 (%)
 180         */
 181         WL12XX_CONF_SG_BEACON_MISS_PERCENT,
 182
 183         /*
 184         * Protection time of the DHCP procedure.
 185         *
 186         * Range: 0 - 100000 (ms)
 187         */
 188         WL12XX_CONF_SG_DHCP_TIME,
 189
 190         /*
 191         * RX guard time before the beginning of a new BT voice frame during
 192         * which no new WLAN trigger frame is transmitted.
 193         *
 194         * Range: 0 - 100000 (us)
 195         */
 196         WL12XX_CONF_SG_RXT,
 197
 198         /*
 199         * TX guard time before the beginning of a new BT voice frame during
 200         * which no new WLAN frame is transmitted.
 201         *
 202         * Range: 0 - 100000 (us)
 203         */
 204         WL12XX_CONF_SG_TXT,
 205
 206         /*
 207         * Enable adaptive RXT/TXT algorithm. If disabled, the host values
 208         * will be utilized.
 209         *
 210         * Range: 0 - disable, 1 - enable
 211         */
 212         WL12XX_CONF_SG_ADAPTIVE_RXT_TXT,
 213
 214         /* TODO: explain this value */
 215         WL12XX_CONF_SG_GENERAL_USAGE_BIT_MAP,
 216
 217         /*
 218         * Number of consecutive BT voice frames not interrupted by WLAN
 219         *
 220         * Range: 0 - 100
 221         */
 222         WL12XX_CONF_SG_HV3_MAX_SERVED,
 223
 224         /*
 225         * The used WLAN legacy service period during active BT ACL link
 226         *
 227         * Range: 0 - 255 (ms)
 228         */
 229         WL12XX_CONF_SG_PS_POLL_TIMEOUT,
 230
 231         /*
 232         * The used WLAN UPSD service period during active BT ACL link
 233         *
 234         * Range: 0 - 255 (ms)
 235         */
 236         WL12XX_CONF_SG_UPSD_TIMEOUT,
 237
 238         WL12XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
 239         WL12XX_CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
 240         WL12XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,
 241
 242         /* AP params */
 243         WL12XX_CONF_AP_BEACON_MISS_TX,
 244         WL12XX_CONF_AP_RX_WINDOW_AFTER_BEACON,
 245         WL12XX_CONF_AP_BEACON_WINDOW_INTERVAL,
 246         WL12XX_CONF_AP_CONNECTION_PROTECTION_TIME,
 247         WL12XX_CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
 248         WL12XX_CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
 249
 250         /* CTS Diluting params */
 251         WL12XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
 252         WL12XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
 253
 254         WL12XX_CONF_SG_TEMP_PARAM_1,
 255         WL12XX_CONF_SG_TEMP_PARAM_2,
 256         WL12XX_CONF_SG_TEMP_PARAM_3,
 257         WL12XX_CONF_SG_TEMP_PARAM_4,
 258         WL12XX_CONF_SG_TEMP_PARAM_5,
 259         WL12XX_CONF_SG_TEMP_PARAM_6,
 260         WL12XX_CONF_SG_TEMP_PARAM_7,
 261         WL12XX_CONF_SG_TEMP_PARAM_8,
 262         WL12XX_CONF_SG_TEMP_PARAM_9,
 263         WL12XX_CONF_SG_TEMP_PARAM_10,
 264
 265         WL12XX_CONF_SG_PARAMS_MAX,
 266         WL12XX_CONF_SG_PARAMS_ALL = 0xff
 267 };
 268
 269 #endif /* __WL12XX_CONF_H__ */