treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / pci / hotplug / cpcihp_zt5550.c
blobae63e5a393c21c793ceca325ea106aebae8f3921
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * cpcihp_zt5550.c
5 * Intel/Ziatech ZT5550 CompactPCI Host Controller driver
7 * Copyright 2002 SOMA Networks, Inc.
8 * Copyright 2001 Intel San Luis Obispo
9 * Copyright 2000,2001 MontaVista Software Inc.
11 * Send feedback to <scottm@somanetworks.com>
14 #include <linux/module.h>
15 #include <linux/moduleparam.h>
16 #include <linux/init.h>
17 #include <linux/errno.h>
18 #include <linux/pci.h>
19 #include <linux/interrupt.h>
20 #include <linux/signal.h> /* IRQF_SHARED */
21 #include "cpci_hotplug.h"
22 #include "cpcihp_zt5550.h"
24 #define DRIVER_VERSION "0.2"
25 #define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>"
26 #define DRIVER_DESC "ZT5550 CompactPCI Hot Plug Driver"
28 #define MY_NAME "cpcihp_zt5550"
30 #define dbg(format, arg...) \
31 do { \
32 if (debug) \
33 printk(KERN_DEBUG "%s: " format "\n", \
34 MY_NAME, ## arg); \
35 } while (0)
36 #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg)
37 #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg)
38 #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg)
40 /* local variables */
41 static bool debug;
42 static bool poll;
43 static struct cpci_hp_controller_ops zt5550_hpc_ops;
44 static struct cpci_hp_controller zt5550_hpc;
46 /* Primary cPCI bus bridge device */
47 static struct pci_dev *bus0_dev;
48 static struct pci_bus *bus0;
50 /* Host controller device */
51 static struct pci_dev *hc_dev;
53 /* Host controller register addresses */
54 static void __iomem *hc_registers;
55 static void __iomem *csr_hc_index;
56 static void __iomem *csr_hc_data;
57 static void __iomem *csr_int_status;
58 static void __iomem *csr_int_mask;
61 static int zt5550_hc_config(struct pci_dev *pdev)
63 int ret;
65 /* Since we know that no boards exist with two HC chips, treat it as an error */
66 if (hc_dev) {
67 err("too many host controller devices?");
68 return -EBUSY;
71 ret = pci_enable_device(pdev);
72 if (ret) {
73 err("cannot enable %s\n", pci_name(pdev));
74 return ret;
77 hc_dev = pdev;
78 dbg("hc_dev = %p", hc_dev);
79 dbg("pci resource start %llx", (unsigned long long)pci_resource_start(hc_dev, 1));
80 dbg("pci resource len %llx", (unsigned long long)pci_resource_len(hc_dev, 1));
82 if (!request_mem_region(pci_resource_start(hc_dev, 1),
83 pci_resource_len(hc_dev, 1), MY_NAME)) {
84 err("cannot reserve MMIO region");
85 ret = -ENOMEM;
86 goto exit_disable_device;
89 hc_registers =
90 ioremap(pci_resource_start(hc_dev, 1), pci_resource_len(hc_dev, 1));
91 if (!hc_registers) {
92 err("cannot remap MMIO region %llx @ %llx",
93 (unsigned long long)pci_resource_len(hc_dev, 1),
94 (unsigned long long)pci_resource_start(hc_dev, 1));
95 ret = -ENODEV;
96 goto exit_release_region;
99 csr_hc_index = hc_registers + CSR_HCINDEX;
100 csr_hc_data = hc_registers + CSR_HCDATA;
101 csr_int_status = hc_registers + CSR_INTSTAT;
102 csr_int_mask = hc_registers + CSR_INTMASK;
105 * Disable host control, fault and serial interrupts
107 dbg("disabling host control, fault and serial interrupts");
108 writeb((u8) HC_INT_MASK_REG, csr_hc_index);
109 writeb((u8) ALL_INDEXED_INTS_MASK, csr_hc_data);
110 dbg("disabled host control, fault and serial interrupts");
113 * Disable timer0, timer1 and ENUM interrupts
115 dbg("disabling timer0, timer1 and ENUM interrupts");
116 writeb((u8) ALL_DIRECT_INTS_MASK, csr_int_mask);
117 dbg("disabled timer0, timer1 and ENUM interrupts");
118 return 0;
120 exit_release_region:
121 release_mem_region(pci_resource_start(hc_dev, 1),
122 pci_resource_len(hc_dev, 1));
123 exit_disable_device:
124 pci_disable_device(hc_dev);
125 return ret;
128 static int zt5550_hc_cleanup(void)
130 if (!hc_dev)
131 return -ENODEV;
133 iounmap(hc_registers);
134 release_mem_region(pci_resource_start(hc_dev, 1),
135 pci_resource_len(hc_dev, 1));
136 pci_disable_device(hc_dev);
137 return 0;
140 static int zt5550_hc_query_enum(void)
142 u8 value;
144 value = inb_p(ENUM_PORT);
145 return ((value & ENUM_MASK) == ENUM_MASK);
148 static int zt5550_hc_check_irq(void *dev_id)
150 int ret;
151 u8 reg;
153 ret = 0;
154 if (dev_id == zt5550_hpc.dev_id) {
155 reg = readb(csr_int_status);
156 if (reg)
157 ret = 1;
159 return ret;
162 static int zt5550_hc_enable_irq(void)
164 u8 reg;
166 if (hc_dev == NULL)
167 return -ENODEV;
169 reg = readb(csr_int_mask);
170 reg = reg & ~ENUM_INT_MASK;
171 writeb(reg, csr_int_mask);
172 return 0;
175 static int zt5550_hc_disable_irq(void)
177 u8 reg;
179 if (hc_dev == NULL)
180 return -ENODEV;
182 reg = readb(csr_int_mask);
183 reg = reg | ENUM_INT_MASK;
184 writeb(reg, csr_int_mask);
185 return 0;
188 static int zt5550_hc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
190 int status;
192 status = zt5550_hc_config(pdev);
193 if (status != 0)
194 return status;
196 dbg("returned from zt5550_hc_config");
198 memset(&zt5550_hpc, 0, sizeof(struct cpci_hp_controller));
199 zt5550_hpc_ops.query_enum = zt5550_hc_query_enum;
200 zt5550_hpc.ops = &zt5550_hpc_ops;
201 if (!poll) {
202 zt5550_hpc.irq = hc_dev->irq;
203 zt5550_hpc.irq_flags = IRQF_SHARED;
204 zt5550_hpc.dev_id = hc_dev;
206 zt5550_hpc_ops.enable_irq = zt5550_hc_enable_irq;
207 zt5550_hpc_ops.disable_irq = zt5550_hc_disable_irq;
208 zt5550_hpc_ops.check_irq = zt5550_hc_check_irq;
209 } else {
210 info("using ENUM# polling mode");
213 status = cpci_hp_register_controller(&zt5550_hpc);
214 if (status != 0) {
215 err("could not register cPCI hotplug controller");
216 goto init_hc_error;
218 dbg("registered controller");
220 /* Look for first device matching cPCI bus's bridge vendor and device IDs */
221 bus0_dev = pci_get_device(PCI_VENDOR_ID_DEC,
222 PCI_DEVICE_ID_DEC_21154, NULL);
223 if (!bus0_dev) {
224 status = -ENODEV;
225 goto init_register_error;
227 bus0 = bus0_dev->subordinate;
228 pci_dev_put(bus0_dev);
230 status = cpci_hp_register_bus(bus0, 0x0a, 0x0f);
231 if (status != 0) {
232 err("could not register cPCI hotplug bus");
233 goto init_register_error;
235 dbg("registered bus");
237 status = cpci_hp_start();
238 if (status != 0) {
239 err("could not started cPCI hotplug system");
240 cpci_hp_unregister_bus(bus0);
241 goto init_register_error;
243 dbg("started cpci hp system");
245 return 0;
246 init_register_error:
247 cpci_hp_unregister_controller(&zt5550_hpc);
248 init_hc_error:
249 err("status = %d", status);
250 zt5550_hc_cleanup();
251 return status;
255 static void zt5550_hc_remove_one(struct pci_dev *pdev)
257 cpci_hp_stop();
258 cpci_hp_unregister_bus(bus0);
259 cpci_hp_unregister_controller(&zt5550_hpc);
260 zt5550_hc_cleanup();
264 static const struct pci_device_id zt5550_hc_pci_tbl[] = {
265 { PCI_VENDOR_ID_ZIATECH, PCI_DEVICE_ID_ZIATECH_5550_HC, PCI_ANY_ID, PCI_ANY_ID, },
266 { 0, }
268 MODULE_DEVICE_TABLE(pci, zt5550_hc_pci_tbl);
270 static struct pci_driver zt5550_hc_driver = {
271 .name = "zt5550_hc",
272 .id_table = zt5550_hc_pci_tbl,
273 .probe = zt5550_hc_init_one,
274 .remove = zt5550_hc_remove_one,
277 static int __init zt5550_init(void)
279 struct resource *r;
280 int rc;
282 info(DRIVER_DESC " version: " DRIVER_VERSION);
283 r = request_region(ENUM_PORT, 1, "#ENUM hotswap signal register");
284 if (!r)
285 return -EBUSY;
287 rc = pci_register_driver(&zt5550_hc_driver);
288 if (rc < 0)
289 release_region(ENUM_PORT, 1);
290 return rc;
293 static void __exit
294 zt5550_exit(void)
296 pci_unregister_driver(&zt5550_hc_driver);
297 release_region(ENUM_PORT, 1);
300 module_init(zt5550_init);
301 module_exit(zt5550_exit);
303 MODULE_AUTHOR(DRIVER_AUTHOR);
304 MODULE_DESCRIPTION(DRIVER_DESC);
305 MODULE_LICENSE("GPL");
306 module_param(debug, bool, 0644);
307 MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
308 module_param(poll, bool, 0644);
309 MODULE_PARM_DESC(poll, "#ENUM polling mode enabled or not");