treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / phy / hisilicon / phy-hi3660-usb3.c
blobcc0af2c044d0e3f669119e6047fb45f6ac89428e
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * Phy provider for USB 3.0 controller on HiSilicon 3660 platform
5 * Copyright (C) 2017-2018 Hilisicon Electronics Co., Ltd.
6 * http://www.huawei.com
8 * Authors: Yu Chen <chenyu56@huawei.com>
9 */
11 #include <linux/kernel.h>
12 #include <linux/mfd/syscon.h>
13 #include <linux/module.h>
14 #include <linux/phy/phy.h>
15 #include <linux/platform_device.h>
16 #include <linux/regmap.h>
18 #define PERI_CRG_CLK_EN4 0x40
19 #define PERI_CRG_CLK_DIS4 0x44
20 #define GT_CLK_USB3OTG_REF BIT(0)
21 #define GT_ACLK_USB3OTG BIT(1)
23 #define PERI_CRG_RSTEN4 0x90
24 #define PERI_CRG_RSTDIS4 0x94
25 #define IP_RST_USB3OTGPHY_POR BIT(3)
26 #define IP_RST_USB3OTG BIT(5)
28 #define PERI_CRG_ISODIS 0x148
29 #define USB_REFCLK_ISO_EN BIT(25)
31 #define PCTRL_PERI_CTRL3 0x10
32 #define PCTRL_PERI_CTRL3_MSK_START 16
33 #define USB_TCXO_EN BIT(1)
35 #define PCTRL_PERI_CTRL24 0x64
36 #define SC_CLK_USB3PHY_3MUX1_SEL BIT(25)
38 #define USBOTG3_CTRL0 0x00
39 #define SC_USB3PHY_ABB_GT_EN BIT(15)
41 #define USBOTG3_CTRL2 0x08
42 #define USBOTG3CTRL2_POWERDOWN_HSP BIT(0)
43 #define USBOTG3CTRL2_POWERDOWN_SSP BIT(1)
45 #define USBOTG3_CTRL3 0x0C
46 #define USBOTG3_CTRL3_VBUSVLDEXT BIT(6)
47 #define USBOTG3_CTRL3_VBUSVLDEXTSEL BIT(5)
49 #define USBOTG3_CTRL4 0x10
51 #define USBOTG3_CTRL7 0x1c
52 #define REF_SSP_EN BIT(16)
54 /* This value config the default txtune parameter of the usb 2.0 phy */
55 #define HI3660_USB_DEFAULT_PHY_PARAM 0x1c466e3
57 struct hi3660_priv {
58 struct device *dev;
59 struct regmap *peri_crg;
60 struct regmap *pctrl;
61 struct regmap *otg_bc;
62 u32 eye_diagram_param;
65 static int hi3660_phy_init(struct phy *phy)
67 struct hi3660_priv *priv = phy_get_drvdata(phy);
68 u32 val, mask;
69 int ret;
71 /* usb refclk iso disable */
72 ret = regmap_write(priv->peri_crg, PERI_CRG_ISODIS, USB_REFCLK_ISO_EN);
73 if (ret)
74 goto out;
76 /* enable usb_tcxo_en */
77 val = USB_TCXO_EN | (USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START);
78 ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
79 if (ret)
80 goto out;
82 /* assert phy */
83 val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
84 ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
85 if (ret)
86 goto out;
88 /* enable phy ref clk */
89 val = SC_USB3PHY_ABB_GT_EN;
90 mask = val;
91 ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL0, mask, val);
92 if (ret)
93 goto out;
95 val = REF_SSP_EN;
96 mask = val;
97 ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL7, mask, val);
98 if (ret)
99 goto out;
101 /* exit from IDDQ mode */
102 mask = USBOTG3CTRL2_POWERDOWN_HSP | USBOTG3CTRL2_POWERDOWN_SSP;
103 ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL2, mask, 0);
104 if (ret)
105 goto out;
107 /* delay for exit from IDDQ mode */
108 usleep_range(100, 120);
110 /* deassert phy */
111 val = IP_RST_USB3OTGPHY_POR | IP_RST_USB3OTG;
112 ret = regmap_write(priv->peri_crg, PERI_CRG_RSTDIS4, val);
113 if (ret)
114 goto out;
116 /* delay for phy deasserted */
117 usleep_range(10000, 15000);
119 /* fake vbus valid signal */
120 val = USBOTG3_CTRL3_VBUSVLDEXT | USBOTG3_CTRL3_VBUSVLDEXTSEL;
121 mask = val;
122 ret = regmap_update_bits(priv->otg_bc, USBOTG3_CTRL3, mask, val);
123 if (ret)
124 goto out;
126 /* delay for vbus valid */
127 usleep_range(100, 120);
129 ret = regmap_write(priv->otg_bc, USBOTG3_CTRL4,
130 priv->eye_diagram_param);
131 if (ret)
132 goto out;
134 return 0;
135 out:
136 dev_err(priv->dev, "failed to init phy ret: %d\n", ret);
137 return ret;
140 static int hi3660_phy_exit(struct phy *phy)
142 struct hi3660_priv *priv = phy_get_drvdata(phy);
143 u32 val;
144 int ret;
146 /* assert phy */
147 val = IP_RST_USB3OTGPHY_POR;
148 ret = regmap_write(priv->peri_crg, PERI_CRG_RSTEN4, val);
149 if (ret)
150 goto out;
152 /* disable usb_tcxo_en */
153 val = USB_TCXO_EN << PCTRL_PERI_CTRL3_MSK_START;
154 ret = regmap_write(priv->pctrl, PCTRL_PERI_CTRL3, val);
155 if (ret)
156 goto out;
158 return 0;
159 out:
160 dev_err(priv->dev, "failed to exit phy ret: %d\n", ret);
161 return ret;
164 static struct phy_ops hi3660_phy_ops = {
165 .init = hi3660_phy_init,
166 .exit = hi3660_phy_exit,
167 .owner = THIS_MODULE,
170 static int hi3660_phy_probe(struct platform_device *pdev)
172 struct phy_provider *phy_provider;
173 struct device *dev = &pdev->dev;
174 struct phy *phy;
175 struct hi3660_priv *priv;
177 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
178 if (!priv)
179 return -ENOMEM;
181 priv->dev = dev;
182 priv->peri_crg = syscon_regmap_lookup_by_phandle(dev->of_node,
183 "hisilicon,pericrg-syscon");
184 if (IS_ERR(priv->peri_crg)) {
185 dev_err(dev, "no hisilicon,pericrg-syscon\n");
186 return PTR_ERR(priv->peri_crg);
189 priv->pctrl = syscon_regmap_lookup_by_phandle(dev->of_node,
190 "hisilicon,pctrl-syscon");
191 if (IS_ERR(priv->pctrl)) {
192 dev_err(dev, "no hisilicon,pctrl-syscon\n");
193 return PTR_ERR(priv->pctrl);
196 /* node of hi3660 phy is a sub-node of usb3_otg_bc */
197 priv->otg_bc = syscon_node_to_regmap(dev->parent->of_node);
198 if (IS_ERR(priv->otg_bc)) {
199 dev_err(dev, "no hisilicon,usb3-otg-bc-syscon\n");
200 return PTR_ERR(priv->otg_bc);
203 if (of_property_read_u32(dev->of_node, "hisilicon,eye-diagram-param",
204 &(priv->eye_diagram_param)))
205 priv->eye_diagram_param = HI3660_USB_DEFAULT_PHY_PARAM;
207 phy = devm_phy_create(dev, NULL, &hi3660_phy_ops);
208 if (IS_ERR(phy))
209 return PTR_ERR(phy);
211 phy_set_drvdata(phy, priv);
212 phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
213 return PTR_ERR_OR_ZERO(phy_provider);
216 static const struct of_device_id hi3660_phy_of_match[] = {
217 {.compatible = "hisilicon,hi3660-usb-phy",},
220 MODULE_DEVICE_TABLE(of, hi3660_phy_of_match);
222 static struct platform_driver hi3660_phy_driver = {
223 .probe = hi3660_phy_probe,
224 .driver = {
225 .name = "hi3660-usb-phy",
226 .of_match_table = hi3660_phy_of_match,
229 module_platform_driver(hi3660_phy_driver);
231 MODULE_AUTHOR("Yu Chen <chenyu56@huawei.com>");
232 MODULE_LICENSE("GPL v2");
233 MODULE_DESCRIPTION("Hilisicon Hi3660 USB3 PHY Driver");