drivers/platform/olpc/olpc-xo175-ec.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Driver for the OLPC XO-1.75 Embedded Controller.
   4  *
   5  * The EC protocol is documented at:
   6  * http://wiki.laptop.org/go/XO_1.75_HOST_to_EC_Protocol
   7  *
   8  * Copyright (C) 2010 One Laptop per Child Foundation.
   9  * Copyright (C) 2018 Lubomir Rintel <lkundrak@v3.sk>
  10  */
  11
  12 #include <linux/completion.h>
  13 #include <linux/ctype.h>
  14 #include <linux/delay.h>
  15 #include <linux/gpio/consumer.h>
  16 #include <linux/input.h>
  17 #include <linux/kfifo.h>
  18 #include <linux/module.h>
  19 #include <linux/olpc-ec.h>
  20 #include <linux/platform_device.h>
  21 #include <linux/power_supply.h>
  22 #include <linux/reboot.h>
  23 #include <linux/slab.h>
  24 #include <linux/spinlock.h>
  25 #include <linux/spi/spi.h>
  26
  27 struct ec_cmd_t {
  28         u8 cmd;
  29         u8 bytes_returned;
  30 };
  31
  32 enum ec_chan_t {
  33         CHAN_NONE = 0,
  34         CHAN_SWITCH,
  35         CHAN_CMD_RESP,
  36         CHAN_KEYBOARD,
  37         CHAN_TOUCHPAD,
  38         CHAN_EVENT,
  39         CHAN_DEBUG,
  40         CHAN_CMD_ERROR,
  41 };
  42
  43 /*
  44  * EC events
  45  */
  46 #define EVENT_AC_CHANGE                 1  /* AC plugged/unplugged */
  47 #define EVENT_BATTERY_STATUS            2  /* Battery low/full/error/gone */
  48 #define EVENT_BATTERY_CRITICAL          3  /* Battery critical voltage */
  49 #define EVENT_BATTERY_SOC_CHANGE        4  /* 1% SOC Change */
  50 #define EVENT_BATTERY_ERROR             5  /* Abnormal error, query for cause */
  51 #define EVENT_POWER_PRESSED             6  /* Power button was pressed */
  52 #define EVENT_POWER_PRESS_WAKE          7  /* Woken up with a power button */
  53 #define EVENT_TIMED_HOST_WAKE           8  /* Host wake timer */
  54 #define EVENT_OLS_HIGH_LIMIT            9  /* OLS crossed dark threshold */
  55 #define EVENT_OLS_LOW_LIMIT             10 /* OLS crossed light threshold */
  56
  57 /*
  58  * EC commands
  59  * (from http://dev.laptop.org/git/users/rsmith/ec-1.75/tree/ec_cmd.h)
  60  */
  61 #define CMD_GET_API_VERSION             0x08 /* out: u8 */
  62 #define CMD_READ_VOLTAGE                0x10 /* out: u16, *9.76/32, mV */
  63 #define CMD_READ_CURRENT                0x11 /* out: s16, *15.625/120, mA */
  64 #define CMD_READ_ACR                    0x12 /* out: s16, *6250/15, uAh */
  65 #define CMD_READ_BATT_TEMPERATURE       0x13 /* out: u16, *100/256, deg C */
  66 #define CMD_READ_AMBIENT_TEMPERATURE    0x14 /* unimplemented, no hardware */
  67 #define CMD_READ_BATTERY_STATUS         0x15 /* out: u8, bitmask */
  68 #define CMD_READ_SOC                    0x16 /* out: u8, percentage */
  69 #define CMD_READ_GAUGE_ID               0x17 /* out: u8 * 8 */
  70 #define CMD_READ_GAUGE_DATA             0x18 /* in: u8 addr, out: u8 data */
  71 #define CMD_READ_BOARD_ID               0x19 /* out: u16 (platform id) */
  72 #define CMD_READ_BATT_ERR_CODE          0x1f /* out: u8, error bitmask */
  73 #define CMD_SET_DCON_POWER              0x26 /* in: u8 */
  74 #define CMD_RESET_EC                    0x28 /* none */
  75 #define CMD_READ_BATTERY_TYPE           0x2c /* out: u8 */
  76 #define CMD_SET_AUTOWAK                 0x33 /* out: u8 */
  77 #define CMD_SET_EC_WAKEUP_TIMER         0x36 /* in: u32, out: ? */
  78 #define CMD_READ_EXT_SCI_MASK           0x37 /* ? */
  79 #define CMD_WRITE_EXT_SCI_MASK          0x38 /* ? */
  80 #define CMD_CLEAR_EC_WAKEUP_TIMER       0x39 /* none */
  81 #define CMD_ENABLE_RUNIN_DISCHARGE      0x3B /* none */
  82 #define CMD_DISABLE_RUNIN_DISCHARGE     0x3C /* none */
  83 #define CMD_READ_MPPT_ACTIVE            0x3d /* out: u8 */
  84 #define CMD_READ_MPPT_LIMIT             0x3e /* out: u8 */
  85 #define CMD_SET_MPPT_LIMIT              0x3f /* in: u8 */
  86 #define CMD_DISABLE_MPPT                0x40 /* none */
  87 #define CMD_ENABLE_MPPT                 0x41 /* none */
  88 #define CMD_READ_VIN                    0x42 /* out: u16 */
  89 #define CMD_EXT_SCI_QUERY               0x43 /* ? */
  90 #define RSP_KEYBOARD_DATA               0x48 /* ? */
  91 #define RSP_TOUCHPAD_DATA               0x49 /* ? */
  92 #define CMD_GET_FW_VERSION              0x4a /* out: u8 * 16 */
  93 #define CMD_POWER_CYCLE                 0x4b /* none */
  94 #define CMD_POWER_OFF                   0x4c /* none */
  95 #define CMD_RESET_EC_SOFT               0x4d /* none */
  96 #define CMD_READ_GAUGE_U16              0x4e /* ? */
  97 #define CMD_ENABLE_MOUSE                0x4f /* ? */
  98 #define CMD_ECHO                        0x52 /* in: u8 * 5, out: u8 * 5 */
  99 #define CMD_GET_FW_DATE                 0x53 /* out: u8 * 16 */
 100 #define CMD_GET_FW_USER                 0x54 /* out: u8 * 16 */
 101 #define CMD_TURN_OFF_POWER              0x55 /* none (same as 0x4c) */
 102 #define CMD_READ_OLS                    0x56 /* out: u16 */
 103 #define CMD_OLS_SMT_LEDON               0x57 /* none */
 104 #define CMD_OLS_SMT_LEDOFF              0x58 /* none */
 105 #define CMD_START_OLS_ASSY              0x59 /* none */
 106 #define CMD_STOP_OLS_ASSY               0x5a /* none */
 107 #define CMD_OLS_SMTTEST_STOP            0x5b /* none */
 108 #define CMD_READ_VIN_SCALED             0x5c /* out: u16 */
 109 #define CMD_READ_BAT_MIN_W              0x5d /* out: u16 */
 110 #define CMD_READ_BAR_MAX_W              0x5e /* out: u16 */
 111 #define CMD_RESET_BAT_MINMAX_W          0x5f /* none */
 112 #define CMD_READ_LOCATION               0x60 /* in: u16 addr, out: u8 data */
 113 #define CMD_WRITE_LOCATION              0x61 /* in: u16 addr, u8 data */
 114 #define CMD_KEYBOARD_CMD                0x62 /* in: u8, out: ? */
 115 #define CMD_TOUCHPAD_CMD                0x63 /* in: u8, out: ? */
 116 #define CMD_GET_FW_HASH                 0x64 /* out: u8 * 16 */
 117 #define CMD_SUSPEND_HINT                0x65 /* in: u8 */
 118 #define CMD_ENABLE_WAKE_TIMER           0x66 /* in: u8 */
 119 #define CMD_SET_WAKE_TIMER              0x67 /* in: 32 */
 120 #define CMD_ENABLE_WAKE_AUTORESET       0x68 /* in: u8 */
 121 #define CMD_OLS_SET_LIMITS              0x69 /* in: u16, u16 */
 122 #define CMD_OLS_GET_LIMITS              0x6a /* out: u16, u16 */
 123 #define CMD_OLS_SET_CEILING             0x6b /* in: u16 */
 124 #define CMD_OLS_GET_CEILING             0x6c /* out: u16 */
 125
 126 /*
 127  * Accepted EC commands, and how many bytes they return. There are plenty
 128  * of EC commands that are no longer implemented, or are implemented only on
 129  * certain older boards.
 130  */
 131 static const struct ec_cmd_t olpc_xo175_ec_cmds[] = {
 132         { CMD_GET_API_VERSION, 1 },
 133         { CMD_READ_VOLTAGE, 2 },
 134         { CMD_READ_CURRENT, 2 },
 135         { CMD_READ_ACR, 2 },
 136         { CMD_READ_BATT_TEMPERATURE, 2 },
 137         { CMD_READ_BATTERY_STATUS, 1 },
 138         { CMD_READ_SOC, 1 },
 139         { CMD_READ_GAUGE_ID, 8 },
 140         { CMD_READ_GAUGE_DATA, 1 },
 141         { CMD_READ_BOARD_ID, 2 },
 142         { CMD_READ_BATT_ERR_CODE, 1 },
 143         { CMD_SET_DCON_POWER, 0 },
 144         { CMD_RESET_EC, 0 },
 145         { CMD_READ_BATTERY_TYPE, 1 },
 146         { CMD_ENABLE_RUNIN_DISCHARGE, 0 },
 147         { CMD_DISABLE_RUNIN_DISCHARGE, 0 },
 148         { CMD_READ_MPPT_ACTIVE, 1 },
 149         { CMD_READ_MPPT_LIMIT, 1 },
 150         { CMD_SET_MPPT_LIMIT, 0 },
 151         { CMD_DISABLE_MPPT, 0 },
 152         { CMD_ENABLE_MPPT, 0 },
 153         { CMD_READ_VIN, 2 },
 154         { CMD_GET_FW_VERSION, 16 },
 155         { CMD_POWER_CYCLE, 0 },
 156         { CMD_POWER_OFF, 0 },
 157         { CMD_RESET_EC_SOFT, 0 },
 158         { CMD_ECHO, 5 },
 159         { CMD_GET_FW_DATE, 16 },
 160         { CMD_GET_FW_USER, 16 },
 161         { CMD_TURN_OFF_POWER, 0 },
 162         { CMD_READ_OLS, 2 },
 163         { CMD_OLS_SMT_LEDON, 0 },
 164         { CMD_OLS_SMT_LEDOFF, 0 },
 165         { CMD_START_OLS_ASSY, 0 },
 166         { CMD_STOP_OLS_ASSY, 0 },
 167         { CMD_OLS_SMTTEST_STOP, 0 },
 168         { CMD_READ_VIN_SCALED, 2 },
 169         { CMD_READ_BAT_MIN_W, 2 },
 170         { CMD_READ_BAR_MAX_W, 2 },
 171         { CMD_RESET_BAT_MINMAX_W, 0 },
 172         { CMD_READ_LOCATION, 1 },
 173         { CMD_WRITE_LOCATION, 0 },
 174         { CMD_GET_FW_HASH, 16 },
 175         { CMD_SUSPEND_HINT, 0 },
 176         { CMD_ENABLE_WAKE_TIMER, 0 },
 177         { CMD_SET_WAKE_TIMER, 0 },
 178         { CMD_ENABLE_WAKE_AUTORESET, 0 },
 179         { CMD_OLS_SET_LIMITS, 0 },
 180         { CMD_OLS_GET_LIMITS, 4 },
 181         { CMD_OLS_SET_CEILING, 0 },
 182         { CMD_OLS_GET_CEILING, 2 },
 183         { CMD_READ_EXT_SCI_MASK, 2 },
 184         { CMD_WRITE_EXT_SCI_MASK, 0 },
 185
 186         { }
 187 };
 188
 189 #define EC_MAX_CMD_DATA_LEN     5
 190 #define EC_MAX_RESP_LEN         16
 191
 192 #define LOG_BUF_SIZE            128
 193
 194 #define PM_WAKEUP_TIME          1000
 195
 196 #define EC_ALL_EVENTS           GENMASK(15, 0)
 197
 198 enum ec_state_t {
 199         CMD_STATE_IDLE = 0,
 200         CMD_STATE_WAITING_FOR_SWITCH,
 201         CMD_STATE_CMD_IN_TX_FIFO,
 202         CMD_STATE_CMD_SENT,
 203         CMD_STATE_RESP_RECEIVED,
 204         CMD_STATE_ERROR_RECEIVED,
 205 };
 206
 207 struct olpc_xo175_ec_cmd {
 208         u8 command;
 209         u8 nr_args;
 210         u8 data_len;
 211         u8 args[EC_MAX_CMD_DATA_LEN];
 212 };
 213
 214 struct olpc_xo175_ec_resp {
 215         u8 channel;
 216         u8 byte;
 217 };
 218
 219 struct olpc_xo175_ec {
 220         bool suspended;
 221
 222         /* SPI related stuff. */
 223         struct spi_device *spi;
 224         struct spi_transfer xfer;
 225         struct spi_message msg;
 226         union {
 227                 struct olpc_xo175_ec_cmd cmd;
 228                 struct olpc_xo175_ec_resp resp;
 229         } tx_buf, rx_buf;
 230
 231         /* GPIO for the CMD signals. */
 232         struct gpio_desc *gpio_cmd;
 233
 234         /* Command handling related state. */
 235         spinlock_t cmd_state_lock;
 236         int cmd_state;
 237         bool cmd_running;
 238         struct completion cmd_done;
 239         struct olpc_xo175_ec_cmd cmd;
 240         u8 resp_data[EC_MAX_RESP_LEN];
 241         int expected_resp_len;
 242         int resp_len;
 243
 244         /* Power button. */
 245         struct input_dev *pwrbtn;
 246
 247         /* Debug handling. */
 248         char logbuf[LOG_BUF_SIZE];
 249         int logbuf_len;
 250 };
 251
 252 static struct platform_device *olpc_ec;
 253
 254 static int olpc_xo175_ec_resp_len(u8 cmd)
 255 {
 256         const struct ec_cmd_t *p;
 257
 258         for (p = olpc_xo175_ec_cmds; p->cmd; p++) {
 259                 if (p->cmd == cmd)
 260                         return p->bytes_returned;
 261         }
 262
 263         return -EINVAL;
 264 }
 265
 266 static void olpc_xo175_ec_flush_logbuf(struct olpc_xo175_ec *priv)
 267 {
 268         dev_dbg(&priv->spi->dev, "got debug string [%*pE]\n",
 269                                 priv->logbuf_len, priv->logbuf);
 270         priv->logbuf_len = 0;
 271 }
 272
 273 static void olpc_xo175_ec_complete(void *arg);
 274
 275 static void olpc_xo175_ec_send_command(struct olpc_xo175_ec *priv, void *cmd,
 276                                                                 size_t cmdlen)
 277 {
 278         int ret;
 279
 280         memcpy(&priv->tx_buf, cmd, cmdlen);
 281         priv->xfer.len = cmdlen;
 282
 283         spi_message_init_with_transfers(&priv->msg, &priv->xfer, 1);
 284
 285         priv->msg.complete = olpc_xo175_ec_complete;
 286         priv->msg.context = priv;
 287
 288         ret = spi_async(priv->spi, &priv->msg);
 289         if (ret)
 290                 dev_err(&priv->spi->dev, "spi_async() failed %d\n", ret);
 291 }
 292
 293 static void olpc_xo175_ec_read_packet(struct olpc_xo175_ec *priv)
 294 {
 295         u8 nonce[] = {0xA5, 0x5A};
 296
 297         olpc_xo175_ec_send_command(priv, nonce, sizeof(nonce));
 298 }
 299
 300 static void olpc_xo175_ec_complete(void *arg)
 301 {
 302         struct olpc_xo175_ec *priv = arg;
 303         struct device *dev = &priv->spi->dev;
 304         struct power_supply *psy;
 305         unsigned long flags;
 306         u8 channel;
 307         u8 byte;
 308         int ret;
 309
 310         ret = priv->msg.status;
 311         if (ret) {
 312                 dev_err(dev, "SPI transfer failed: %d\n", ret);
 313
 314                 spin_lock_irqsave(&priv->cmd_state_lock, flags);
 315                 if (priv->cmd_running) {
 316                         priv->resp_len = 0;
 317                         priv->cmd_state = CMD_STATE_ERROR_RECEIVED;
 318                         complete(&priv->cmd_done);
 319                 }
 320                 spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
 321
 322                 if (ret != -EINTR)
 323                         olpc_xo175_ec_read_packet(priv);
 324
 325                 return;
 326         }
 327
 328         channel = priv->rx_buf.resp.channel;
 329         byte = priv->rx_buf.resp.byte;
 330
 331         switch (channel) {
 332         case CHAN_NONE:
 333                 spin_lock_irqsave(&priv->cmd_state_lock, flags);
 334
 335                 if (!priv->cmd_running) {
 336                         /* We can safely ignore these */
 337                         dev_err(dev, "spurious FIFO read packet\n");
 338                         spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
 339                         return;
 340                 }
 341
 342                 priv->cmd_state = CMD_STATE_CMD_SENT;
 343                 if (!priv->expected_resp_len)
 344                         complete(&priv->cmd_done);
 345                 olpc_xo175_ec_read_packet(priv);
 346
 347                 spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
 348                 return;
 349
 350         case CHAN_SWITCH:
 351                 spin_lock_irqsave(&priv->cmd_state_lock, flags);
 352
 353                 if (!priv->cmd_running) {
 354                         /* Just go with the flow */
 355                         dev_err(dev, "spurious SWITCH packet\n");
 356                         memset(&priv->cmd, 0, sizeof(priv->cmd));
 357                         priv->cmd.command = CMD_ECHO;
 358                 }
 359
 360                 priv->cmd_state = CMD_STATE_CMD_IN_TX_FIFO;
 361
 362                 /* Throw command into TxFIFO */
 363                 gpiod_set_value_cansleep(priv->gpio_cmd, 0);
 364                 olpc_xo175_ec_send_command(priv, &priv->cmd, sizeof(priv->cmd));
 365
 366                 spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
 367                 return;
 368
 369         case CHAN_CMD_RESP:
 370                 spin_lock_irqsave(&priv->cmd_state_lock, flags);
 371
 372                 if (!priv->cmd_running) {
 373                         dev_err(dev, "spurious response packet\n");
 374                 } else if (priv->resp_len >= priv->expected_resp_len) {
 375                         dev_err(dev, "too many response packets\n");
 376                 } else {
 377                         priv->resp_data[priv->resp_len++] = byte;
 378                         if (priv->resp_len == priv->expected_resp_len) {
 379                                 priv->cmd_state = CMD_STATE_RESP_RECEIVED;
 380                                 complete(&priv->cmd_done);
 381                         }
 382                 }
 383
 384                 spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
 385                 break;
 386
 387         case CHAN_CMD_ERROR:
 388                 spin_lock_irqsave(&priv->cmd_state_lock, flags);
 389
 390                 if (!priv->cmd_running) {
 391                         dev_err(dev, "spurious cmd error packet\n");
 392                 } else {
 393                         priv->resp_data[0] = byte;
 394                         priv->resp_len = 1;
 395                         priv->cmd_state = CMD_STATE_ERROR_RECEIVED;
 396                         complete(&priv->cmd_done);
 397                 }
 398                 spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
 399                 break;
 400
 401         case CHAN_KEYBOARD:
 402                 dev_warn(dev, "keyboard is not supported\n");
 403                 break;
 404
 405         case CHAN_TOUCHPAD:
 406                 dev_warn(dev, "touchpad is not supported\n");
 407                 break;
 408
 409         case CHAN_EVENT:
 410                 dev_dbg(dev, "got event %.2x\n", byte);
 411                 switch (byte) {
 412                 case EVENT_AC_CHANGE:
 413                         psy = power_supply_get_by_name("olpc-ac");
 414                         if (psy) {
 415                                 power_supply_changed(psy);
 416                                 power_supply_put(psy);
 417                         }
 418                         break;
 419                 case EVENT_BATTERY_STATUS:
 420                 case EVENT_BATTERY_CRITICAL:
 421                 case EVENT_BATTERY_SOC_CHANGE:
 422                 case EVENT_BATTERY_ERROR:
 423                         psy = power_supply_get_by_name("olpc-battery");
 424                         if (psy) {
 425                                 power_supply_changed(psy);
 426                                 power_supply_put(psy);
 427                         }
 428                         break;
 429                 case EVENT_POWER_PRESSED:
 430                         input_report_key(priv->pwrbtn, KEY_POWER, 1);
 431                         input_sync(priv->pwrbtn);
 432                         input_report_key(priv->pwrbtn, KEY_POWER, 0);
 433                         input_sync(priv->pwrbtn);
 434                         /* fall through */
 435                 case EVENT_POWER_PRESS_WAKE:
 436                 case EVENT_TIMED_HOST_WAKE:
 437                         pm_wakeup_event(priv->pwrbtn->dev.parent,
 438                                                 PM_WAKEUP_TIME);
 439                         break;
 440                 default:
 441                         dev_dbg(dev, "ignored unknown event %.2x\n", byte);
 442                         break;
 443                 }
 444                 break;
 445
 446         case CHAN_DEBUG:
 447                 if (byte == '\n') {
 448                         olpc_xo175_ec_flush_logbuf(priv);
 449                 } else if (isprint(byte)) {
 450                         priv->logbuf[priv->logbuf_len++] = byte;
 451                         if (priv->logbuf_len == LOG_BUF_SIZE)
 452                                 olpc_xo175_ec_flush_logbuf(priv);
 453                 }
 454                 break;
 455
 456         default:
 457                 dev_warn(dev, "unknown channel: %d, %.2x\n", channel, byte);
 458                 break;
 459         }
 460
 461         /* Most non-command packets get the TxFIFO refilled and an ACK. */
 462         olpc_xo175_ec_read_packet(priv);
 463 }
 464
 465 /*
 466  * This function is protected with a mutex. We can safely assume that
 467  * there will be only one instance of this function running at a time.
 468  * One of the ways in which we enforce this is by waiting until we get
 469  * all response bytes back from the EC, rather than just the number that
 470  * the caller requests (otherwise, we might start a new command while an
 471  * old command's response bytes are still incoming).
 472  */
 473 static int olpc_xo175_ec_cmd(u8 cmd, u8 *inbuf, size_t inlen, u8 *resp,
 474                                         size_t resp_len, void *ec_cb_arg)
 475 {
 476         struct olpc_xo175_ec *priv = ec_cb_arg;
 477         struct device *dev = &priv->spi->dev;
 478         unsigned long flags;
 479         size_t nr_bytes;
 480         int ret = 0;
 481
 482         dev_dbg(dev, "CMD %x, %zd bytes expected\n", cmd, resp_len);
 483
 484         if (inlen > 5) {
 485                 dev_err(dev, "command len %zd too big!\n", resp_len);
 486                 return -EOVERFLOW;
 487         }
 488
 489         /* Suspending in the middle of an EC command hoses things badly! */
 490         if (WARN_ON(priv->suspended))
 491                 return -EBUSY;
 492
 493         /* Ensure a valid command and return bytes */
 494         ret = olpc_xo175_ec_resp_len(cmd);
 495         if (ret < 0) {
 496                 dev_err_ratelimited(dev, "unknown command 0x%x\n", cmd);
 497
 498                 /*
 499                  * Assume the best in our callers, and allow unknown commands
 500                  * through. I'm not the charitable type, but it was beaten
 501                  * into me. Just maintain a minimum standard of sanity.
 502                  */
 503                 if (resp_len > sizeof(priv->resp_data)) {
 504                         dev_err(dev, "response too big: %zd!\n", resp_len);
 505                         return -EOVERFLOW;
 506                 }
 507                 nr_bytes = resp_len;
 508         } else {
 509                 nr_bytes = (size_t)ret;
 510                 ret = 0;
 511         }
 512         resp_len = min(resp_len, nr_bytes);
 513
 514         spin_lock_irqsave(&priv->cmd_state_lock, flags);
 515
 516         /* Initialize the state machine */
 517         init_completion(&priv->cmd_done);
 518         priv->cmd_running = true;
 519         priv->cmd_state = CMD_STATE_WAITING_FOR_SWITCH;
 520         memset(&priv->cmd, 0, sizeof(priv->cmd));
 521         priv->cmd.command = cmd;
 522         priv->cmd.nr_args = inlen;
 523         priv->cmd.data_len = 0;
 524         memcpy(priv->cmd.args, inbuf, inlen);
 525         priv->expected_resp_len = nr_bytes;
 526         priv->resp_len = 0;
 527
 528         /* Tickle the cmd gpio to get things started */
 529         gpiod_set_value_cansleep(priv->gpio_cmd, 1);
 530
 531         spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
 532
 533         /* The irq handler should do the rest */
 534         if (!wait_for_completion_timeout(&priv->cmd_done,
 535                         msecs_to_jiffies(4000))) {
 536                 dev_err(dev, "EC cmd error: timeout in STATE %d\n",
 537                                 priv->cmd_state);
 538                 gpiod_set_value_cansleep(priv->gpio_cmd, 0);
 539                 spi_slave_abort(priv->spi);
 540                 olpc_xo175_ec_read_packet(priv);
 541                 return -ETIMEDOUT;
 542         }
 543
 544         spin_lock_irqsave(&priv->cmd_state_lock, flags);
 545
 546         /* Deal with the results. */
 547         if (priv->cmd_state == CMD_STATE_ERROR_RECEIVED) {
 548                 /* EC-provided error is in the single response byte */
 549                 dev_err(dev, "command 0x%x returned error 0x%x\n",
 550                                                 cmd, priv->resp_data[0]);
 551                 ret = -EREMOTEIO;
 552         } else if (priv->resp_len != nr_bytes) {
 553                 dev_err(dev, "command 0x%x returned %d bytes, expected %zd bytes\n",
 554                                                 cmd, priv->resp_len, nr_bytes);
 555                 ret = -EREMOTEIO;
 556         } else {
 557                 /*
 558                  * We may have 8 bytes in priv->resp, but we only care about
 559                  * what we've been asked for. If the caller asked for only 2
 560                  * bytes, give them that. We've guaranteed that
 561                  * resp_len <= priv->resp_len and priv->resp_len == nr_bytes.
 562                  */
 563                 memcpy(resp, priv->resp_data, resp_len);
 564         }
 565
 566         /* This should already be low, but just in case. */
 567         gpiod_set_value_cansleep(priv->gpio_cmd, 0);
 568         priv->cmd_running = false;
 569
 570         spin_unlock_irqrestore(&priv->cmd_state_lock, flags);
 571
 572         return ret;
 573 }
 574
 575 static int olpc_xo175_ec_set_event_mask(unsigned int mask)
 576 {
 577         u8 args[2];
 578
 579         args[0] = mask >> 0;
 580         args[1] = mask >> 8;
 581         return olpc_ec_cmd(CMD_WRITE_EXT_SCI_MASK, args, 2, NULL, 0);
 582 }
 583
 584 static void olpc_xo175_ec_power_off(void)
 585 {
 586         while (1) {
 587                 olpc_ec_cmd(CMD_POWER_OFF, NULL, 0, NULL, 0);
 588                 mdelay(1000);
 589         }
 590 }
 591
 592 static int __maybe_unused olpc_xo175_ec_suspend(struct device *dev)
 593 {
 594         struct olpc_xo175_ec *priv = dev_get_drvdata(dev);
 595         static struct {
 596                 u8 suspend;
 597                 u32 suspend_count;
 598         } __packed hintargs;
 599         static unsigned int suspend_count;
 600
 601         /*
 602          * SOC_SLEEP is not wired to the EC on B3 and earlier boards.
 603          * This command lets the EC know instead. The suspend count doesn't seem
 604          * to be used anywhere but in the EC debug output.
 605          */
 606         hintargs.suspend = 1;
 607         hintargs.suspend_count = suspend_count++;
 608         olpc_ec_cmd(CMD_SUSPEND_HINT, (void *)&hintargs, sizeof(hintargs),
 609                                                                 NULL, 0);
 610
 611         /*
 612          * After we've sent the suspend hint, don't allow further EC commands
 613          * to be run until we've resumed. Userspace tasks should be frozen,
 614          * but kernel threads and interrupts could still schedule EC commands.
 615          */
 616         priv->suspended = true;
 617
 618         return 0;
 619 }
 620
 621 static int __maybe_unused olpc_xo175_ec_resume_noirq(struct device *dev)
 622 {
 623         struct olpc_xo175_ec *priv = dev_get_drvdata(dev);
 624
 625         priv->suspended = false;
 626
 627         return 0;
 628 }
 629
 630 static int __maybe_unused olpc_xo175_ec_resume(struct device *dev)
 631 {
 632         u8 x = 0;
 633
 634         /*
 635          * The resume hint is only needed if no other commands are
 636          * being sent during resume. all it does is tell the EC
 637          * the SoC is definitely awake.
 638          */
 639         olpc_ec_cmd(CMD_SUSPEND_HINT, &x, 1, NULL, 0);
 640
 641         /* Enable all EC events while we're awake */
 642         olpc_xo175_ec_set_event_mask(EC_ALL_EVENTS);
 643
 644         return 0;
 645 }
 646
 647 static struct olpc_ec_driver olpc_xo175_ec_driver = {
 648         .ec_cmd = olpc_xo175_ec_cmd,
 649 };
 650
 651 static int olpc_xo175_ec_remove(struct spi_device *spi)
 652 {
 653         if (pm_power_off == olpc_xo175_ec_power_off)
 654                 pm_power_off = NULL;
 655
 656         spi_slave_abort(spi);
 657
 658         platform_device_unregister(olpc_ec);
 659         olpc_ec = NULL;
 660
 661         return 0;
 662 }
 663
 664 static int olpc_xo175_ec_probe(struct spi_device *spi)
 665 {
 666         struct olpc_xo175_ec *priv;
 667         int ret;
 668
 669         if (olpc_ec) {
 670                 dev_err(&spi->dev, "OLPC EC already registered.\n");
 671                 return -EBUSY;
 672         }
 673
 674         priv = devm_kzalloc(&spi->dev, sizeof(*priv), GFP_KERNEL);
 675         if (!priv)
 676                 return -ENOMEM;
 677
 678         priv->gpio_cmd = devm_gpiod_get(&spi->dev, "cmd", GPIOD_OUT_LOW);
 679         if (IS_ERR(priv->gpio_cmd)) {
 680                 dev_err(&spi->dev, "failed to get cmd gpio: %ld\n",
 681                                         PTR_ERR(priv->gpio_cmd));
 682                 return PTR_ERR(priv->gpio_cmd);
 683         }
 684
 685         priv->spi = spi;
 686
 687         spin_lock_init(&priv->cmd_state_lock);
 688         priv->cmd_state = CMD_STATE_IDLE;
 689         init_completion(&priv->cmd_done);
 690
 691         priv->logbuf_len = 0;
 692
 693         /* Set up power button input device */
 694         priv->pwrbtn = devm_input_allocate_device(&spi->dev);
 695         if (!priv->pwrbtn)
 696                 return -ENOMEM;
 697         priv->pwrbtn->name = "Power Button";
 698         priv->pwrbtn->dev.parent = &spi->dev;
 699         input_set_capability(priv->pwrbtn, EV_KEY, KEY_POWER);
 700         ret = input_register_device(priv->pwrbtn);
 701         if (ret) {
 702                 dev_err(&spi->dev, "error registering input device: %d\n", ret);
 703                 return ret;
 704         }
 705
 706         spi_set_drvdata(spi, priv);
 707
 708         priv->xfer.rx_buf = &priv->rx_buf;
 709         priv->xfer.tx_buf = &priv->tx_buf;
 710
 711         olpc_xo175_ec_read_packet(priv);
 712
 713         olpc_ec_driver_register(&olpc_xo175_ec_driver, priv);
 714         olpc_ec = platform_device_register_resndata(&spi->dev, "olpc-ec", -1,
 715                                                         NULL, 0, NULL, 0);
 716
 717         /* Enable all EC events while we're awake */
 718         olpc_xo175_ec_set_event_mask(EC_ALL_EVENTS);
 719
 720         if (pm_power_off == NULL)
 721                 pm_power_off = olpc_xo175_ec_power_off;
 722
 723         dev_info(&spi->dev, "OLPC XO-1.75 Embedded Controller driver\n");
 724
 725         return 0;
 726 }
 727
 728 static const struct dev_pm_ops olpc_xo175_ec_pm_ops = {
 729         SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(NULL, olpc_xo175_ec_resume_noirq)
 730         SET_RUNTIME_PM_OPS(olpc_xo175_ec_suspend, olpc_xo175_ec_resume, NULL)
 731 };
 732
 733 static const struct of_device_id olpc_xo175_ec_of_match[] = {
 734         { .compatible = "olpc,xo1.75-ec" },
 735         { }
 736 };
 737 MODULE_DEVICE_TABLE(of, olpc_xo175_ec_of_match);
 738
 739 static const struct spi_device_id olpc_xo175_ec_id_table[] = {
 740         { "xo1.75-ec", 0 },
 741         {}
 742 };
 743 MODULE_DEVICE_TABLE(spi, olpc_xo175_ec_id_table);
 744
 745 static struct spi_driver olpc_xo175_ec_spi_driver = {
 746         .driver = {
 747                 .name   = "olpc-xo175-ec",
 748                 .of_match_table = olpc_xo175_ec_of_match,
 749                 .pm = &olpc_xo175_ec_pm_ops,
 750         },
 751         .probe          = olpc_xo175_ec_probe,
 752         .remove         = olpc_xo175_ec_remove,
 753 };
 754 module_spi_driver(olpc_xo175_ec_spi_driver);
 755
 756 MODULE_DESCRIPTION("OLPC XO-1.75 Embedded Controller driver");
 757 MODULE_AUTHOR("Lennert Buytenhek <buytenh@wantstofly.org>"); /* Functionality */
 758 MODULE_AUTHOR("Lubomir Rintel <lkundrak@v3.sk>"); /* Bugs */
 759 MODULE_LICENSE("GPL");