treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / s390 / char / vmlogrdr.c
blob58333cb4503f4db1e3c76aa188e820997b2d9b6b
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3 * character device driver for reading z/VM system service records
6 * Copyright IBM Corp. 2004, 2009
7 * character device driver for reading z/VM system service records,
8 * Version 1.0
9 * Author(s): Xenia Tkatschow <xenia@us.ibm.com>
10 * Stefan Weinhuber <wein@de.ibm.com>
14 #define KMSG_COMPONENT "vmlogrdr"
15 #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
17 #include <linux/module.h>
18 #include <linux/init.h>
19 #include <linux/slab.h>
20 #include <linux/errno.h>
21 #include <linux/types.h>
22 #include <linux/interrupt.h>
23 #include <linux/spinlock.h>
24 #include <linux/atomic.h>
25 #include <linux/uaccess.h>
26 #include <asm/cpcmd.h>
27 #include <asm/debug.h>
28 #include <asm/ebcdic.h>
29 #include <net/iucv/iucv.h>
30 #include <linux/kmod.h>
31 #include <linux/cdev.h>
32 #include <linux/device.h>
33 #include <linux/string.h>
35 MODULE_AUTHOR
36 ("(C) 2004 IBM Corporation by Xenia Tkatschow (xenia@us.ibm.com)\n"
37 " Stefan Weinhuber (wein@de.ibm.com)");
38 MODULE_DESCRIPTION ("Character device driver for reading z/VM "
39 "system service records.");
40 MODULE_LICENSE("GPL");
44 * The size of the buffer for iucv data transfer is one page,
45 * but in addition to the data we read from iucv we also
46 * place an integer and some characters into that buffer,
47 * so the maximum size for record data is a little less then
48 * one page.
50 #define NET_BUFFER_SIZE (PAGE_SIZE - sizeof(int) - sizeof(FENCE))
53 * The elements that are concurrently accessed by bottom halves are
54 * connection_established, iucv_path_severed, local_interrupt_buffer
55 * and receive_ready. The first three can be protected by
56 * priv_lock. receive_ready is atomic, so it can be incremented and
57 * decremented without holding a lock.
58 * The variable dev_in_use needs to be protected by the lock, since
59 * it's a flag used by open to make sure that the device is opened only
60 * by one user at the same time.
62 struct vmlogrdr_priv_t {
63 char system_service[8];
64 char internal_name[8];
65 char recording_name[8];
66 struct iucv_path *path;
67 int connection_established;
68 int iucv_path_severed;
69 struct iucv_message local_interrupt_buffer;
70 atomic_t receive_ready;
71 int minor_num;
72 char * buffer;
73 char * current_position;
74 int remaining;
75 ulong residual_length;
76 int buffer_free;
77 int dev_in_use; /* 1: already opened, 0: not opened*/
78 spinlock_t priv_lock;
79 struct device *device;
80 struct device *class_device;
81 int autorecording;
82 int autopurge;
87 * File operation structure for vmlogrdr devices
89 static int vmlogrdr_open(struct inode *, struct file *);
90 static int vmlogrdr_release(struct inode *, struct file *);
91 static ssize_t vmlogrdr_read (struct file *filp, char __user *data,
92 size_t count, loff_t * ppos);
94 static const struct file_operations vmlogrdr_fops = {
95 .owner = THIS_MODULE,
96 .open = vmlogrdr_open,
97 .release = vmlogrdr_release,
98 .read = vmlogrdr_read,
99 .llseek = no_llseek,
103 static void vmlogrdr_iucv_path_complete(struct iucv_path *, u8 *ipuser);
104 static void vmlogrdr_iucv_path_severed(struct iucv_path *, u8 *ipuser);
105 static void vmlogrdr_iucv_message_pending(struct iucv_path *,
106 struct iucv_message *);
109 static struct iucv_handler vmlogrdr_iucv_handler = {
110 .path_complete = vmlogrdr_iucv_path_complete,
111 .path_severed = vmlogrdr_iucv_path_severed,
112 .message_pending = vmlogrdr_iucv_message_pending,
116 static DECLARE_WAIT_QUEUE_HEAD(conn_wait_queue);
117 static DECLARE_WAIT_QUEUE_HEAD(read_wait_queue);
120 * pointer to system service private structure
121 * minor number 0 --> logrec
122 * minor number 1 --> account
123 * minor number 2 --> symptom
126 static struct vmlogrdr_priv_t sys_ser[] = {
127 { .system_service = "*LOGREC ",
128 .internal_name = "logrec",
129 .recording_name = "EREP",
130 .minor_num = 0,
131 .buffer_free = 1,
132 .priv_lock = __SPIN_LOCK_UNLOCKED(sys_ser[0].priv_lock),
133 .autorecording = 1,
134 .autopurge = 1,
136 { .system_service = "*ACCOUNT",
137 .internal_name = "account",
138 .recording_name = "ACCOUNT",
139 .minor_num = 1,
140 .buffer_free = 1,
141 .priv_lock = __SPIN_LOCK_UNLOCKED(sys_ser[1].priv_lock),
142 .autorecording = 1,
143 .autopurge = 1,
145 { .system_service = "*SYMPTOM",
146 .internal_name = "symptom",
147 .recording_name = "SYMPTOM",
148 .minor_num = 2,
149 .buffer_free = 1,
150 .priv_lock = __SPIN_LOCK_UNLOCKED(sys_ser[2].priv_lock),
151 .autorecording = 1,
152 .autopurge = 1,
156 #define MAXMINOR ARRAY_SIZE(sys_ser)
158 static char FENCE[] = {"EOR"};
159 static int vmlogrdr_major = 0;
160 static struct cdev *vmlogrdr_cdev = NULL;
161 static int recording_class_AB;
164 static void vmlogrdr_iucv_path_complete(struct iucv_path *path, u8 *ipuser)
166 struct vmlogrdr_priv_t * logptr = path->private;
168 spin_lock(&logptr->priv_lock);
169 logptr->connection_established = 1;
170 spin_unlock(&logptr->priv_lock);
171 wake_up(&conn_wait_queue);
175 static void vmlogrdr_iucv_path_severed(struct iucv_path *path, u8 *ipuser)
177 struct vmlogrdr_priv_t * logptr = path->private;
178 u8 reason = (u8) ipuser[8];
180 pr_err("vmlogrdr: connection severed with reason %i\n", reason);
182 iucv_path_sever(path, NULL);
183 kfree(path);
184 logptr->path = NULL;
186 spin_lock(&logptr->priv_lock);
187 logptr->connection_established = 0;
188 logptr->iucv_path_severed = 1;
189 spin_unlock(&logptr->priv_lock);
191 wake_up(&conn_wait_queue);
192 /* just in case we're sleeping waiting for a record */
193 wake_up_interruptible(&read_wait_queue);
197 static void vmlogrdr_iucv_message_pending(struct iucv_path *path,
198 struct iucv_message *msg)
200 struct vmlogrdr_priv_t * logptr = path->private;
203 * This function is the bottom half so it should be quick.
204 * Copy the external interrupt data into our local eib and increment
205 * the usage count
207 spin_lock(&logptr->priv_lock);
208 memcpy(&logptr->local_interrupt_buffer, msg, sizeof(*msg));
209 atomic_inc(&logptr->receive_ready);
210 spin_unlock(&logptr->priv_lock);
211 wake_up_interruptible(&read_wait_queue);
215 static int vmlogrdr_get_recording_class_AB(void)
217 static const char cp_command[] = "QUERY COMMAND RECORDING ";
218 char cp_response[80];
219 char *tail;
220 int len,i;
222 cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
223 len = strnlen(cp_response,sizeof(cp_response));
224 // now the parsing
225 tail=strnchr(cp_response,len,'=');
226 if (!tail)
227 return 0;
228 tail++;
229 if (!strncmp("ANY",tail,3))
230 return 1;
231 if (!strncmp("NONE",tail,4))
232 return 0;
234 * expect comma separated list of classes here, if one of them
235 * is A or B return 1 otherwise 0
237 for (i=tail-cp_response; i<len; i++)
238 if ( cp_response[i]=='A' || cp_response[i]=='B' )
239 return 1;
240 return 0;
244 static int vmlogrdr_recording(struct vmlogrdr_priv_t * logptr,
245 int action, int purge)
248 char cp_command[80];
249 char cp_response[160];
250 char *onoff, *qid_string;
251 int rc;
253 onoff = ((action == 1) ? "ON" : "OFF");
254 qid_string = ((recording_class_AB == 1) ? " QID * " : "");
257 * The recording commands needs to be called with option QID
258 * for guests that have previlege classes A or B.
259 * Purging has to be done as separate step, because recording
260 * can't be switched on as long as records are on the queue.
261 * Doing both at the same time doesn't work.
263 if (purge && (action == 1)) {
264 memset(cp_command, 0x00, sizeof(cp_command));
265 memset(cp_response, 0x00, sizeof(cp_response));
266 snprintf(cp_command, sizeof(cp_command),
267 "RECORDING %s PURGE %s",
268 logptr->recording_name,
269 qid_string);
270 cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
273 memset(cp_command, 0x00, sizeof(cp_command));
274 memset(cp_response, 0x00, sizeof(cp_response));
275 snprintf(cp_command, sizeof(cp_command), "RECORDING %s %s %s",
276 logptr->recording_name,
277 onoff,
278 qid_string);
279 cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
280 /* The recording command will usually answer with 'Command complete'
281 * on success, but when the specific service was never connected
282 * before then there might be an additional informational message
283 * 'HCPCRC8072I Recording entry not found' before the
284 * 'Command complete'. So I use strstr rather then the strncmp.
286 if (strstr(cp_response,"Command complete"))
287 rc = 0;
288 else
289 rc = -EIO;
291 * If we turn recording off, we have to purge any remaining records
292 * afterwards, as a large number of queued records may impact z/VM
293 * performance.
295 if (purge && (action == 0)) {
296 memset(cp_command, 0x00, sizeof(cp_command));
297 memset(cp_response, 0x00, sizeof(cp_response));
298 snprintf(cp_command, sizeof(cp_command),
299 "RECORDING %s PURGE %s",
300 logptr->recording_name,
301 qid_string);
302 cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
305 return rc;
309 static int vmlogrdr_open (struct inode *inode, struct file *filp)
311 int dev_num = 0;
312 struct vmlogrdr_priv_t * logptr = NULL;
313 int connect_rc = 0;
314 int ret;
316 dev_num = iminor(inode);
317 if (dev_num >= MAXMINOR)
318 return -ENODEV;
319 logptr = &sys_ser[dev_num];
322 * only allow for blocking reads to be open
324 if (filp->f_flags & O_NONBLOCK)
325 return -EOPNOTSUPP;
327 /* Besure this device hasn't already been opened */
328 spin_lock_bh(&logptr->priv_lock);
329 if (logptr->dev_in_use) {
330 spin_unlock_bh(&logptr->priv_lock);
331 return -EBUSY;
333 logptr->dev_in_use = 1;
334 logptr->connection_established = 0;
335 logptr->iucv_path_severed = 0;
336 atomic_set(&logptr->receive_ready, 0);
337 logptr->buffer_free = 1;
338 spin_unlock_bh(&logptr->priv_lock);
340 /* set the file options */
341 filp->private_data = logptr;
343 /* start recording for this service*/
344 if (logptr->autorecording) {
345 ret = vmlogrdr_recording(logptr,1,logptr->autopurge);
346 if (ret)
347 pr_warn("vmlogrdr: failed to start recording automatically\n");
350 /* create connection to the system service */
351 logptr->path = iucv_path_alloc(10, 0, GFP_KERNEL);
352 if (!logptr->path)
353 goto out_dev;
354 connect_rc = iucv_path_connect(logptr->path, &vmlogrdr_iucv_handler,
355 logptr->system_service, NULL, NULL,
356 logptr);
357 if (connect_rc) {
358 pr_err("vmlogrdr: iucv connection to %s "
359 "failed with rc %i \n",
360 logptr->system_service, connect_rc);
361 goto out_path;
364 /* We've issued the connect and now we must wait for a
365 * ConnectionComplete or ConnectinSevered Interrupt
366 * before we can continue to process.
368 wait_event(conn_wait_queue, (logptr->connection_established)
369 || (logptr->iucv_path_severed));
370 if (logptr->iucv_path_severed)
371 goto out_record;
372 nonseekable_open(inode, filp);
373 return 0;
375 out_record:
376 if (logptr->autorecording)
377 vmlogrdr_recording(logptr,0,logptr->autopurge);
378 out_path:
379 kfree(logptr->path); /* kfree(NULL) is ok. */
380 logptr->path = NULL;
381 out_dev:
382 logptr->dev_in_use = 0;
383 return -EIO;
387 static int vmlogrdr_release (struct inode *inode, struct file *filp)
389 int ret;
391 struct vmlogrdr_priv_t * logptr = filp->private_data;
393 iucv_path_sever(logptr->path, NULL);
394 kfree(logptr->path);
395 logptr->path = NULL;
396 if (logptr->autorecording) {
397 ret = vmlogrdr_recording(logptr,0,logptr->autopurge);
398 if (ret)
399 pr_warn("vmlogrdr: failed to stop recording automatically\n");
401 logptr->dev_in_use = 0;
403 return 0;
407 static int vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv)
409 int rc, *temp;
410 /* we need to keep track of two data sizes here:
411 * The number of bytes we need to receive from iucv and
412 * the total number of bytes we actually write into the buffer.
414 int user_data_count, iucv_data_count;
415 char * buffer;
417 if (atomic_read(&priv->receive_ready)) {
418 spin_lock_bh(&priv->priv_lock);
419 if (priv->residual_length){
420 /* receive second half of a record */
421 iucv_data_count = priv->residual_length;
422 user_data_count = 0;
423 buffer = priv->buffer;
424 } else {
425 /* receive a new record:
426 * We need to return the total length of the record
427 * + size of FENCE in the first 4 bytes of the buffer.
429 iucv_data_count = priv->local_interrupt_buffer.length;
430 user_data_count = sizeof(int);
431 temp = (int*)priv->buffer;
432 *temp= iucv_data_count + sizeof(FENCE);
433 buffer = priv->buffer + sizeof(int);
436 * If the record is bigger than our buffer, we receive only
437 * a part of it. We can get the rest later.
439 if (iucv_data_count > NET_BUFFER_SIZE)
440 iucv_data_count = NET_BUFFER_SIZE;
441 rc = iucv_message_receive(priv->path,
442 &priv->local_interrupt_buffer,
443 0, buffer, iucv_data_count,
444 &priv->residual_length);
445 spin_unlock_bh(&priv->priv_lock);
446 /* An rc of 5 indicates that the record was bigger than
447 * the buffer, which is OK for us. A 9 indicates that the
448 * record was purged befor we could receive it.
450 if (rc == 5)
451 rc = 0;
452 if (rc == 9)
453 atomic_set(&priv->receive_ready, 0);
454 } else {
455 rc = 1;
457 if (!rc) {
458 priv->buffer_free = 0;
459 user_data_count += iucv_data_count;
460 priv->current_position = priv->buffer;
461 if (priv->residual_length == 0){
462 /* the whole record has been captured,
463 * now add the fence */
464 atomic_dec(&priv->receive_ready);
465 buffer = priv->buffer + user_data_count;
466 memcpy(buffer, FENCE, sizeof(FENCE));
467 user_data_count += sizeof(FENCE);
469 priv->remaining = user_data_count;
472 return rc;
476 static ssize_t vmlogrdr_read(struct file *filp, char __user *data,
477 size_t count, loff_t * ppos)
479 int rc;
480 struct vmlogrdr_priv_t * priv = filp->private_data;
482 while (priv->buffer_free) {
483 rc = vmlogrdr_receive_data(priv);
484 if (rc) {
485 rc = wait_event_interruptible(read_wait_queue,
486 atomic_read(&priv->receive_ready));
487 if (rc)
488 return rc;
491 /* copy only up to end of record */
492 if (count > priv->remaining)
493 count = priv->remaining;
495 if (copy_to_user(data, priv->current_position, count))
496 return -EFAULT;
498 *ppos += count;
499 priv->current_position += count;
500 priv->remaining -= count;
502 /* if all data has been transferred, set buffer free */
503 if (priv->remaining == 0)
504 priv->buffer_free = 1;
506 return count;
509 static ssize_t vmlogrdr_autopurge_store(struct device * dev,
510 struct device_attribute *attr,
511 const char * buf, size_t count)
513 struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
514 ssize_t ret = count;
516 switch (buf[0]) {
517 case '0':
518 priv->autopurge=0;
519 break;
520 case '1':
521 priv->autopurge=1;
522 break;
523 default:
524 ret = -EINVAL;
526 return ret;
530 static ssize_t vmlogrdr_autopurge_show(struct device *dev,
531 struct device_attribute *attr,
532 char *buf)
534 struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
535 return sprintf(buf, "%u\n", priv->autopurge);
539 static DEVICE_ATTR(autopurge, 0644, vmlogrdr_autopurge_show,
540 vmlogrdr_autopurge_store);
543 static ssize_t vmlogrdr_purge_store(struct device * dev,
544 struct device_attribute *attr,
545 const char * buf, size_t count)
548 char cp_command[80];
549 char cp_response[80];
550 struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
552 if (buf[0] != '1')
553 return -EINVAL;
555 memset(cp_command, 0x00, sizeof(cp_command));
556 memset(cp_response, 0x00, sizeof(cp_response));
559 * The recording command needs to be called with option QID
560 * for guests that have previlege classes A or B.
561 * Other guests will not recognize the command and we have to
562 * issue the same command without the QID parameter.
565 if (recording_class_AB)
566 snprintf(cp_command, sizeof(cp_command),
567 "RECORDING %s PURGE QID * ",
568 priv->recording_name);
569 else
570 snprintf(cp_command, sizeof(cp_command),
571 "RECORDING %s PURGE ",
572 priv->recording_name);
574 cpcmd(cp_command, cp_response, sizeof(cp_response), NULL);
576 return count;
580 static DEVICE_ATTR(purge, 0200, NULL, vmlogrdr_purge_store);
583 static ssize_t vmlogrdr_autorecording_store(struct device *dev,
584 struct device_attribute *attr,
585 const char *buf, size_t count)
587 struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
588 ssize_t ret = count;
590 switch (buf[0]) {
591 case '0':
592 priv->autorecording=0;
593 break;
594 case '1':
595 priv->autorecording=1;
596 break;
597 default:
598 ret = -EINVAL;
600 return ret;
604 static ssize_t vmlogrdr_autorecording_show(struct device *dev,
605 struct device_attribute *attr,
606 char *buf)
608 struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
609 return sprintf(buf, "%u\n", priv->autorecording);
613 static DEVICE_ATTR(autorecording, 0644, vmlogrdr_autorecording_show,
614 vmlogrdr_autorecording_store);
617 static ssize_t vmlogrdr_recording_store(struct device * dev,
618 struct device_attribute *attr,
619 const char * buf, size_t count)
621 struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
622 ssize_t ret;
624 switch (buf[0]) {
625 case '0':
626 ret = vmlogrdr_recording(priv,0,0);
627 break;
628 case '1':
629 ret = vmlogrdr_recording(priv,1,0);
630 break;
631 default:
632 ret = -EINVAL;
634 if (ret)
635 return ret;
636 else
637 return count;
642 static DEVICE_ATTR(recording, 0200, NULL, vmlogrdr_recording_store);
645 static ssize_t recording_status_show(struct device_driver *driver, char *buf)
647 static const char cp_command[] = "QUERY RECORDING ";
648 int len;
650 cpcmd(cp_command, buf, 4096, NULL);
651 len = strlen(buf);
652 return len;
654 static DRIVER_ATTR_RO(recording_status);
655 static struct attribute *vmlogrdr_drv_attrs[] = {
656 &driver_attr_recording_status.attr,
657 NULL,
659 static struct attribute_group vmlogrdr_drv_attr_group = {
660 .attrs = vmlogrdr_drv_attrs,
662 static const struct attribute_group *vmlogrdr_drv_attr_groups[] = {
663 &vmlogrdr_drv_attr_group,
664 NULL,
667 static struct attribute *vmlogrdr_attrs[] = {
668 &dev_attr_autopurge.attr,
669 &dev_attr_purge.attr,
670 &dev_attr_autorecording.attr,
671 &dev_attr_recording.attr,
672 NULL,
674 static struct attribute_group vmlogrdr_attr_group = {
675 .attrs = vmlogrdr_attrs,
677 static const struct attribute_group *vmlogrdr_attr_groups[] = {
678 &vmlogrdr_attr_group,
679 NULL,
682 static int vmlogrdr_pm_prepare(struct device *dev)
684 int rc;
685 struct vmlogrdr_priv_t *priv = dev_get_drvdata(dev);
687 rc = 0;
688 if (priv) {
689 spin_lock_bh(&priv->priv_lock);
690 if (priv->dev_in_use)
691 rc = -EBUSY;
692 spin_unlock_bh(&priv->priv_lock);
694 if (rc)
695 pr_err("vmlogrdr: device %s is busy. Refuse to suspend.\n",
696 dev_name(dev));
697 return rc;
701 static const struct dev_pm_ops vmlogrdr_pm_ops = {
702 .prepare = vmlogrdr_pm_prepare,
705 static struct class *vmlogrdr_class;
706 static struct device_driver vmlogrdr_driver = {
707 .name = "vmlogrdr",
708 .bus = &iucv_bus,
709 .pm = &vmlogrdr_pm_ops,
710 .groups = vmlogrdr_drv_attr_groups,
713 static int vmlogrdr_register_driver(void)
715 int ret;
717 /* Register with iucv driver */
718 ret = iucv_register(&vmlogrdr_iucv_handler, 1);
719 if (ret)
720 goto out;
722 ret = driver_register(&vmlogrdr_driver);
723 if (ret)
724 goto out_iucv;
726 vmlogrdr_class = class_create(THIS_MODULE, "vmlogrdr");
727 if (IS_ERR(vmlogrdr_class)) {
728 ret = PTR_ERR(vmlogrdr_class);
729 vmlogrdr_class = NULL;
730 goto out_driver;
732 return 0;
734 out_driver:
735 driver_unregister(&vmlogrdr_driver);
736 out_iucv:
737 iucv_unregister(&vmlogrdr_iucv_handler, 1);
738 out:
739 return ret;
743 static void vmlogrdr_unregister_driver(void)
745 class_destroy(vmlogrdr_class);
746 vmlogrdr_class = NULL;
747 driver_unregister(&vmlogrdr_driver);
748 iucv_unregister(&vmlogrdr_iucv_handler, 1);
752 static int vmlogrdr_register_device(struct vmlogrdr_priv_t *priv)
754 struct device *dev;
755 int ret;
757 dev = kzalloc(sizeof(struct device), GFP_KERNEL);
758 if (dev) {
759 dev_set_name(dev, "%s", priv->internal_name);
760 dev->bus = &iucv_bus;
761 dev->parent = iucv_root;
762 dev->driver = &vmlogrdr_driver;
763 dev->groups = vmlogrdr_attr_groups;
764 dev_set_drvdata(dev, priv);
766 * The release function could be called after the
767 * module has been unloaded. It's _only_ task is to
768 * free the struct. Therefore, we specify kfree()
769 * directly here. (Probably a little bit obfuscating
770 * but legitime ...).
772 dev->release = (void (*)(struct device *))kfree;
773 } else
774 return -ENOMEM;
775 ret = device_register(dev);
776 if (ret) {
777 put_device(dev);
778 return ret;
781 priv->class_device = device_create(vmlogrdr_class, dev,
782 MKDEV(vmlogrdr_major,
783 priv->minor_num),
784 priv, "%s", dev_name(dev));
785 if (IS_ERR(priv->class_device)) {
786 ret = PTR_ERR(priv->class_device);
787 priv->class_device=NULL;
788 device_unregister(dev);
789 return ret;
791 priv->device = dev;
792 return 0;
796 static int vmlogrdr_unregister_device(struct vmlogrdr_priv_t *priv)
798 device_destroy(vmlogrdr_class, MKDEV(vmlogrdr_major, priv->minor_num));
799 if (priv->device != NULL) {
800 device_unregister(priv->device);
801 priv->device=NULL;
803 return 0;
807 static int vmlogrdr_register_cdev(dev_t dev)
809 int rc = 0;
810 vmlogrdr_cdev = cdev_alloc();
811 if (!vmlogrdr_cdev) {
812 return -ENOMEM;
814 vmlogrdr_cdev->owner = THIS_MODULE;
815 vmlogrdr_cdev->ops = &vmlogrdr_fops;
816 rc = cdev_add(vmlogrdr_cdev, dev, MAXMINOR);
817 if (!rc)
818 return 0;
820 // cleanup: cdev is not fully registered, no cdev_del here!
821 kobject_put(&vmlogrdr_cdev->kobj);
822 vmlogrdr_cdev=NULL;
823 return rc;
827 static void vmlogrdr_cleanup(void)
829 int i;
831 if (vmlogrdr_cdev) {
832 cdev_del(vmlogrdr_cdev);
833 vmlogrdr_cdev=NULL;
835 for (i=0; i < MAXMINOR; ++i ) {
836 vmlogrdr_unregister_device(&sys_ser[i]);
837 free_page((unsigned long)sys_ser[i].buffer);
839 vmlogrdr_unregister_driver();
840 if (vmlogrdr_major) {
841 unregister_chrdev_region(MKDEV(vmlogrdr_major, 0), MAXMINOR);
842 vmlogrdr_major=0;
847 static int __init vmlogrdr_init(void)
849 int rc;
850 int i;
851 dev_t dev;
853 if (! MACHINE_IS_VM) {
854 pr_err("not running under VM, driver not loaded.\n");
855 return -ENODEV;
858 recording_class_AB = vmlogrdr_get_recording_class_AB();
860 rc = alloc_chrdev_region(&dev, 0, MAXMINOR, "vmlogrdr");
861 if (rc)
862 return rc;
863 vmlogrdr_major = MAJOR(dev);
865 rc=vmlogrdr_register_driver();
866 if (rc)
867 goto cleanup;
869 for (i=0; i < MAXMINOR; ++i ) {
870 sys_ser[i].buffer = (char *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
871 if (!sys_ser[i].buffer) {
872 rc = -ENOMEM;
873 break;
875 sys_ser[i].current_position = sys_ser[i].buffer;
876 rc=vmlogrdr_register_device(&sys_ser[i]);
877 if (rc)
878 break;
880 if (rc)
881 goto cleanup;
883 rc = vmlogrdr_register_cdev(dev);
884 if (rc)
885 goto cleanup;
886 return 0;
888 cleanup:
889 vmlogrdr_cleanup();
890 return rc;
894 static void __exit vmlogrdr_exit(void)
896 vmlogrdr_cleanup();
897 return;
901 module_init(vmlogrdr_init);
902 module_exit(vmlogrdr_exit);