treewide: remove redundant IS_ERR() before error code check

[linux/fpc-iii.git] / drivers / scsi / esas2r / esas2r_io.c

/*
 *  linux/drivers/scsi/esas2r/esas2r_io.c
 *      For use with ATTO ExpressSAS R6xx SAS/SATA RAID controllers
 *
 *  Copyright (c) 2001-2013 ATTO Technology, Inc.
 *  (mailto:linuxdrivers@attotech.com)mpt3sas/mpt3sas_trigger_diag.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * NO WARRANTY
 * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
 * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
 * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
 * solely responsible for determining the appropriateness of using and
 * distributing the Program and assumes all risks associated with its
 * exercise of rights under this Agreement, including but not limited to
 * the risks and costs of program errors, damage to or loss of data,
 * programs or equipment, and unavailability or interruption of operations.
 *
 * DISCLAIMER OF LIABILITY
 * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
 * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
 * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
 * USA.
 */

#include "esas2r.h"

void esas2r_start_request(struct esas2r_adapter *a, struct esas2r_request *rq)
{
        struct esas2r_target *t = NULL;
        struct esas2r_request *startrq = rq;
        unsigned long flags;

        if (unlikely(test_bit(AF_DEGRADED_MODE, &a->flags) ||
                     test_bit(AF_POWER_DOWN, &a->flags))) {
                if (rq->vrq->scsi.function == VDA_FUNC_SCSI)
                        rq->req_stat = RS_SEL2;
                else
                        rq->req_stat = RS_DEGRADED;
        } else if (likely(rq->vrq->scsi.function == VDA_FUNC_SCSI)) {
                t = a->targetdb + rq->target_id;

                if (unlikely(t >= a->targetdb_end
                             || !(t->flags & TF_USED))) {
                        rq->req_stat = RS_SEL;
                } else {
                        /* copy in the target ID. */
                        rq->vrq->scsi.target_id = cpu_to_le16(t->virt_targ_id);

                        /*
                         * Test if we want to report RS_SEL for missing target.
                         * Note that if AF_DISC_PENDING is set than this will
                         * go on the defer queue.
                         */
                        if (unlikely(t->target_state != TS_PRESENT &&
                                     !test_bit(AF_DISC_PENDING, &a->flags)))
                                rq->req_stat = RS_SEL;
                }
        }

        if (unlikely(rq->req_stat != RS_PENDING)) {
                esas2r_complete_request(a, rq);
                return;
        }

        esas2r_trace("rq=%p", rq);
        esas2r_trace("rq->vrq->scsi.handle=%x", rq->vrq->scsi.handle);

        if (rq->vrq->scsi.function == VDA_FUNC_SCSI) {
                esas2r_trace("rq->target_id=%d", rq->target_id);
                esas2r_trace("rq->vrq->scsi.flags=%x", rq->vrq->scsi.flags);
        }

        spin_lock_irqsave(&a->queue_lock, flags);

        if (likely(list_empty(&a->defer_list) &&
                   !test_bit(AF_CHPRST_PENDING, &a->flags) &&
                   !test_bit(AF_FLASHING, &a->flags) &&
                   !test_bit(AF_DISC_PENDING, &a->flags)))
                esas2r_local_start_request(a, startrq);
        else
                list_add_tail(&startrq->req_list, &a->defer_list);

        spin_unlock_irqrestore(&a->queue_lock, flags);
}

/*
 * Starts the specified request.  all requests have RS_PENDING set when this
 * routine is called.  The caller is usually esas2r_start_request, but
 * esas2r_do_deferred_processes will start request that are deferred.
 *
 * The caller must ensure that requests can be started.
 *
 * esas2r_start_request will defer a request if there are already requests
 * waiting or there is a chip reset pending.  once the reset condition clears,
 * esas2r_do_deferred_processes will call this function to start the request.
 *
 * When a request is started, it is placed on the active list and queued to
 * the controller.
 */
void esas2r_local_start_request(struct esas2r_adapter *a,
                                struct esas2r_request *rq)
{
        esas2r_trace_enter();
        esas2r_trace("rq=%p", rq);
        esas2r_trace("rq->vrq:%p", rq->vrq);
        esas2r_trace("rq->vrq_md->phys_addr:%x", rq->vrq_md->phys_addr);

        if (unlikely(rq->vrq->scsi.function == VDA_FUNC_FLASH
                     && rq->vrq->flash.sub_func == VDA_FLASH_COMMIT))
                set_bit(AF_FLASHING, &a->flags);

        list_add_tail(&rq->req_list, &a->active_list);
        esas2r_start_vda_request(a, rq);
        esas2r_trace_exit();
        return;
}

void esas2r_start_vda_request(struct esas2r_adapter *a,
                              struct esas2r_request *rq)
{
        struct esas2r_inbound_list_source_entry *element;
        u32 dw;

        rq->req_stat = RS_STARTED;
        /*
         * Calculate the inbound list entry location and the current state of
         * toggle bit.
         */
        a->last_write++;
        if (a->last_write >= a->list_size) {
                a->last_write = 0;
                /* update the toggle bit */
                if (test_bit(AF_COMM_LIST_TOGGLE, &a->flags))
                        clear_bit(AF_COMM_LIST_TOGGLE, &a->flags);
                else
                        set_bit(AF_COMM_LIST_TOGGLE, &a->flags);
        }

        element =
                (struct esas2r_inbound_list_source_entry *)a->inbound_list_md.
                virt_addr
                + a->last_write;

        /* Set the VDA request size if it was never modified */
        if (rq->vda_req_sz == RQ_SIZE_DEFAULT)
                rq->vda_req_sz = (u16)(a->max_vdareq_size / sizeof(u32));

        element->address = cpu_to_le64(rq->vrq_md->phys_addr);
        element->length = cpu_to_le32(rq->vda_req_sz);

        /* Update the write pointer */
        dw = a->last_write;

        if (test_bit(AF_COMM_LIST_TOGGLE, &a->flags))
                dw |= MU_ILW_TOGGLE;

        esas2r_trace("rq->vrq->scsi.handle:%x", rq->vrq->scsi.handle);
        esas2r_trace("dw:%x", dw);
        esas2r_trace("rq->vda_req_sz:%x", rq->vda_req_sz);
        esas2r_write_register_dword(a, MU_IN_LIST_WRITE, dw);
}

/*
 * Build the scatter/gather list for an I/O request according to the
 * specifications placed in the s/g context.  The caller must initialize
 * context prior to the initial call by calling esas2r_sgc_init().
 */
bool esas2r_build_sg_list_sge(struct esas2r_adapter *a,
                              struct esas2r_sg_context *sgc)
{
        struct esas2r_request *rq = sgc->first_req;
        union atto_vda_req *vrq = rq->vrq;

        while (sgc->length) {
                u32 rem = 0;
                u64 addr;
                u32 len;

                len = (*sgc->get_phys_addr)(sgc, &addr);

                if (unlikely(len == 0))
                        return false;

                /* if current length is more than what's left, stop there */
                if (unlikely(len > sgc->length))
                        len = sgc->length;

another_entry:
                /* limit to a round number less than the maximum length */
                if (len > SGE_LEN_MAX) {
                        /*
                         * Save the remainder of the split.  Whenever we limit
                         * an entry we come back around to build entries out
                         * of the leftover.  We do this to prevent multiple
                         * calls to the get_phys_addr() function for an SGE
                         * that is too large.
                         */
                        rem = len - SGE_LEN_MAX;
                        len = SGE_LEN_MAX;
                }

                /* See if we need to allocate a new SGL */
                if (unlikely(sgc->sge.a64.curr > sgc->sge.a64.limit)) {
                        u8 sgelen;
                        struct esas2r_mem_desc *sgl;

                        /*
                         * If no SGls are available, return failure.  The
                         * caller can call us later with the current context
                         * to pick up here.
                         */
                        sgl = esas2r_alloc_sgl(a);

                        if (unlikely(sgl == NULL))
                                return false;

                        /* Calculate the length of the last SGE filled in */
                        sgelen = (u8)((u8 *)sgc->sge.a64.curr
                                      - (u8 *)sgc->sge.a64.last);

                        /*
                         * Copy the last SGE filled in to the first entry of
                         * the new SGL to make room for the chain entry.
                         */
                        memcpy(sgl->virt_addr, sgc->sge.a64.last, sgelen);

                        /* Figure out the new curr pointer in the new segment */
                        sgc->sge.a64.curr =
                                (struct atto_vda_sge *)((u8 *)sgl->virt_addr +
                                                        sgelen);

                        /* Set the limit pointer and build the chain entry */
                        sgc->sge.a64.limit =
                                (struct atto_vda_sge *)((u8 *)sgl->virt_addr
                                                        + sgl_page_size
                                                        - sizeof(struct
                                                                 atto_vda_sge));
                        sgc->sge.a64.last->length = cpu_to_le32(
                                SGE_CHAIN | SGE_ADDR_64);
                        sgc->sge.a64.last->address =
                                cpu_to_le64(sgl->phys_addr);

                        /*
                         * Now, if there was a previous chain entry, then
                         * update it to contain the length of this segment
                         * and size of this chain.  otherwise this is the
                         * first SGL, so set the chain_offset in the request.
                         */
                        if (sgc->sge.a64.chain) {
                                sgc->sge.a64.chain->length |=
                                        cpu_to_le32(
                                                ((u8 *)(sgc->sge.a64.
                                                        last + 1)
                                                 - (u8 *)rq->sg_table->
                                                 virt_addr)
                                                + sizeof(struct atto_vda_sge) *
                                                LOBIT(SGE_CHAIN_SZ));
                        } else {
                                vrq->scsi.chain_offset = (u8)
                                                         ((u8 *)sgc->
                                                          sge.a64.last -
                                                          (u8 *)vrq);

                                /*
                                 * This is the first SGL, so set the
                                 * chain_offset and the VDA request size in
                                 * the request.
                                 */
                                rq->vda_req_sz =
                                        (vrq->scsi.chain_offset +
                                         sizeof(struct atto_vda_sge) +
                                         3)
                                        / sizeof(u32);
                        }

                        /*
                         * Remember this so when we get a new SGL filled in we
                         * can update the length of this chain entry.
                         */
                        sgc->sge.a64.chain = sgc->sge.a64.last;

                        /* Now link the new SGL onto the primary request. */
                        list_add(&sgl->next_desc, &rq->sg_table_head);
                }

                /* Update last one filled in */
                sgc->sge.a64.last = sgc->sge.a64.curr;

                /* Build the new SGE and update the S/G context */
                sgc->sge.a64.curr->length = cpu_to_le32(SGE_ADDR_64 | len);
                sgc->sge.a64.curr->address = cpu_to_le32(addr);
                sgc->sge.a64.curr++;
                sgc->cur_offset += len;
                sgc->length -= len;

                /*
                 * Check if we previously split an entry.  If so we have to
                 * pick up where we left off.
                 */
                if (rem) {
                        addr += len;
                        len = rem;
                        rem = 0;
                        goto another_entry;
                }
        }

        /* Mark the end of the SGL */
        sgc->sge.a64.last->length |= cpu_to_le32(SGE_LAST);

        /*
         * If there was a previous chain entry, update the length to indicate
         * the length of this last segment.
         */
        if (sgc->sge.a64.chain) {
                sgc->sge.a64.chain->length |= cpu_to_le32(
                        ((u8 *)(sgc->sge.a64.curr) -
                         (u8 *)rq->sg_table->virt_addr));
        } else {
                u16 reqsize;

                /*
                 * The entire VDA request was not used so lets
                 * set the size of the VDA request to be DMA'd
                 */
                reqsize =
                        ((u16)((u8 *)sgc->sge.a64.last - (u8 *)vrq)
                         + sizeof(struct atto_vda_sge) + 3) / sizeof(u32);

                /*
                 * Only update the request size if it is bigger than what is
                 * already there.  We can come in here twice for some management
                 * commands.
                 */
                if (reqsize > rq->vda_req_sz)
                        rq->vda_req_sz = reqsize;
        }
        return true;
}


/*
 * Create PRD list for each I-block consumed by the command. This routine
 * determines how much data is required from each I-block being consumed
 * by the command. The first and last I-blocks can be partials and all of
 * the I-blocks in between are for a full I-block of data.
 *
 * The interleave size is used to determine the number of bytes in the 1st
 * I-block and the remaining I-blocks are what remeains.
 */
static bool esas2r_build_prd_iblk(struct esas2r_adapter *a,
                                  struct esas2r_sg_context *sgc)
{
        struct esas2r_request *rq = sgc->first_req;
        u64 addr;
        u32 len;
        struct esas2r_mem_desc *sgl;
        u32 numchain = 1;
        u32 rem = 0;

        while (sgc->length) {
                /* Get the next address/length pair */

                len = (*sgc->get_phys_addr)(sgc, &addr);

                if (unlikely(len == 0))
                        return false;

                /* If current length is more than what's left, stop there */

                if (unlikely(len > sgc->length))
                        len = sgc->length;

another_entry:
                /* Limit to a round number less than the maximum length */

                if (len > PRD_LEN_MAX) {
                        /*
                         * Save the remainder of the split.  whenever we limit
                         * an entry we come back around to build entries out
                         * of the leftover.  We do this to prevent multiple
                         * calls to the get_phys_addr() function for an SGE
                         * that is too large.
                         */
                        rem = len - PRD_LEN_MAX;
                        len = PRD_LEN_MAX;
                }

                /* See if we need to allocate a new SGL */
                if (sgc->sge.prd.sge_cnt == 0) {
                        if (len == sgc->length) {
                                /*
                                 * We only have 1 PRD entry left.
                                 * It can be placed where the chain
                                 * entry would have gone
                                 */

                                /* Build the simple SGE */
                                sgc->sge.prd.curr->ctl_len = cpu_to_le32(
                                        PRD_DATA | len);
                                sgc->sge.prd.curr->address = cpu_to_le64(addr);

                                /* Adjust length related fields */
                                sgc->cur_offset += len;
                                sgc->length -= len;

                                /* We use the reserved chain entry for data */
                                numchain = 0;

                                break;
                        }

                        if (sgc->sge.prd.chain) {
                                /*
                                 * Fill # of entries of current SGL in previous
                                 * chain the length of this current SGL may not
                                 * full.
                                 */

                                sgc->sge.prd.chain->ctl_len |= cpu_to_le32(
                                        sgc->sge.prd.sgl_max_cnt);
                        }

                        /*
                         * If no SGls are available, return failure.  The
                         * caller can call us later with the current context
                         * to pick up here.
                         */

                        sgl = esas2r_alloc_sgl(a);

                        if (unlikely(sgl == NULL))
                                return false;

                        /*
                         * Link the new SGL onto the chain
                         * They are in reverse order
                         */
                        list_add(&sgl->next_desc, &rq->sg_table_head);

                        /*
                         * An SGL was just filled in and we are starting
                         * a new SGL. Prime the chain of the ending SGL with
                         * info that points to the new SGL. The length gets
                         * filled in when the new SGL is filled or ended
                         */

                        sgc->sge.prd.chain = sgc->sge.prd.curr;

                        sgc->sge.prd.chain->ctl_len = cpu_to_le32(PRD_CHAIN);
                        sgc->sge.prd.chain->address =
                                cpu_to_le64(sgl->phys_addr);

                        /*
                         * Start a new segment.
                         * Take one away and save for chain SGE
                         */

                        sgc->sge.prd.curr =
                                (struct atto_physical_region_description *)sgl
                                ->
                                virt_addr;
                        sgc->sge.prd.sge_cnt = sgc->sge.prd.sgl_max_cnt - 1;
                }

                sgc->sge.prd.sge_cnt--;
                /* Build the simple SGE */
                sgc->sge.prd.curr->ctl_len = cpu_to_le32(PRD_DATA | len);
                sgc->sge.prd.curr->address = cpu_to_le64(addr);

                /* Used another element.  Point to the next one */

                sgc->sge.prd.curr++;

                /* Adjust length related fields */

                sgc->cur_offset += len;
                sgc->length -= len;

                /*
                 * Check if we previously split an entry.  If so we have to
                 * pick up where we left off.
                 */

                if (rem) {
                        addr += len;
                        len = rem;
                        rem = 0;
                        goto another_entry;
                }
        }

        if (!list_empty(&rq->sg_table_head)) {
                if (sgc->sge.prd.chain) {
                        sgc->sge.prd.chain->ctl_len |=
                                cpu_to_le32(sgc->sge.prd.sgl_max_cnt
                                            - sgc->sge.prd.sge_cnt
                                            - numchain);
                }
        }

        return true;
}

bool esas2r_build_sg_list_prd(struct esas2r_adapter *a,
                              struct esas2r_sg_context *sgc)
{
        struct esas2r_request *rq = sgc->first_req;
        u32 len = sgc->length;
        struct esas2r_target *t = a->targetdb + rq->target_id;
        u8 is_i_o = 0;
        u16 reqsize;
        struct atto_physical_region_description *curr_iblk_chn;
        u8 *cdb = (u8 *)&rq->vrq->scsi.cdb[0];

        /*
         * extract LBA from command so we can determine
         * the I-Block boundary
         */

        if (rq->vrq->scsi.function == VDA_FUNC_SCSI
            && t->target_state == TS_PRESENT
            && !(t->flags & TF_PASS_THRU)) {
                u32 lbalo = 0;

                switch (rq->vrq->scsi.cdb[0]) {
                case    READ_16:
                case    WRITE_16:
                {
                        lbalo =
                                MAKEDWORD(MAKEWORD(cdb[9],
                                                   cdb[8]),
                                          MAKEWORD(cdb[7],
                                                   cdb[6]));
                        is_i_o = 1;
                        break;
                }

                case    READ_12:
                case    WRITE_12:
                case    READ_10:
                case    WRITE_10:
                {
                        lbalo =
                                MAKEDWORD(MAKEWORD(cdb[5],
                                                   cdb[4]),
                                          MAKEWORD(cdb[3],
                                                   cdb[2]));
                        is_i_o = 1;
                        break;
                }

                case    READ_6:
                case    WRITE_6:
                {
                        lbalo =
                                MAKEDWORD(MAKEWORD(cdb[3],
                                                   cdb[2]),
                                          MAKEWORD(cdb[1] & 0x1F,
                                                   0));
                        is_i_o = 1;
                        break;
                }

                default:
                        break;
                }

                if (is_i_o) {
                        u32 startlba;

                        rq->vrq->scsi.iblk_cnt_prd = 0;

                        /* Determine size of 1st I-block PRD list       */
                        startlba = t->inter_block - (lbalo & (t->inter_block -
                                                              1));
                        sgc->length = startlba * t->block_size;

                        /* Chk if the 1st iblk chain starts at base of Iblock */
                        if ((lbalo & (t->inter_block - 1)) == 0)
                                rq->flags |= RF_1ST_IBLK_BASE;

                        if (sgc->length > len)
                                sgc->length = len;
                } else {
                        sgc->length = len;
                }
        } else {
                sgc->length = len;
        }

        /* get our starting chain address   */

        curr_iblk_chn =
                (struct atto_physical_region_description *)sgc->sge.a64.curr;

        sgc->sge.prd.sgl_max_cnt = sgl_page_size /
                                   sizeof(struct
                                          atto_physical_region_description);

        /* create all of the I-block PRD lists          */

        while (len) {
                sgc->sge.prd.sge_cnt = 0;
                sgc->sge.prd.chain = NULL;
                sgc->sge.prd.curr = curr_iblk_chn;

                /* increment to next I-Block    */

                len -= sgc->length;

                /* go build the next I-Block PRD list   */

                if (unlikely(!esas2r_build_prd_iblk(a, sgc)))
                        return false;

                curr_iblk_chn++;

                if (is_i_o) {
                        rq->vrq->scsi.iblk_cnt_prd++;

                        if (len > t->inter_byte)
                                sgc->length = t->inter_byte;
                        else
                                sgc->length = len;
                }
        }

        /* figure out the size used of the VDA request */

        reqsize = ((u16)((u8 *)curr_iblk_chn - (u8 *)rq->vrq))
                  / sizeof(u32);

        /*
         * only update the request size if it is bigger than what is
         * already there.  we can come in here twice for some management
         * commands.
         */

        if (reqsize > rq->vda_req_sz)
                rq->vda_req_sz = reqsize;

        return true;
}

static void esas2r_handle_pending_reset(struct esas2r_adapter *a, u32 currtime)
{
        u32 delta = currtime - a->chip_init_time;

        if (delta <= ESAS2R_CHPRST_WAIT_TIME) {
                /* Wait before accessing registers */
        } else if (delta >= ESAS2R_CHPRST_TIME) {
                /*
                 * The last reset failed so try again. Reset
                 * processing will give up after three tries.
                 */
                esas2r_local_reset_adapter(a);
        } else {
                /* We can now see if the firmware is ready */
                u32 doorbell;

                doorbell = esas2r_read_register_dword(a, MU_DOORBELL_OUT);
                if (doorbell == 0xFFFFFFFF || !(doorbell & DRBL_FORCE_INT)) {
                        esas2r_force_interrupt(a);
                } else {
                        u32 ver = (doorbell & DRBL_FW_VER_MSK);

                        /* Driver supports API version 0 and 1 */
                        esas2r_write_register_dword(a, MU_DOORBELL_OUT,
                                                    doorbell);
                        if (ver == DRBL_FW_VER_0) {
                                set_bit(AF_CHPRST_DETECTED, &a->flags);
                                set_bit(AF_LEGACY_SGE_MODE, &a->flags);

                                a->max_vdareq_size = 128;
                                a->build_sgl = esas2r_build_sg_list_sge;
                        } else if (ver == DRBL_FW_VER_1) {
                                set_bit(AF_CHPRST_DETECTED, &a->flags);
                                clear_bit(AF_LEGACY_SGE_MODE, &a->flags);

                                a->max_vdareq_size = 1024;
                                a->build_sgl = esas2r_build_sg_list_prd;
                        } else {
                                esas2r_local_reset_adapter(a);
                        }
                }
        }
}


/* This function must be called once per timer tick */
void esas2r_timer_tick(struct esas2r_adapter *a)
{
        u32 currtime = jiffies_to_msecs(jiffies);
        u32 deltatime = currtime - a->last_tick_time;

        a->last_tick_time = currtime;

        /* count down the uptime */
        if (a->chip_uptime &&
            !test_bit(AF_CHPRST_PENDING, &a->flags) &&
            !test_bit(AF_DISC_PENDING, &a->flags)) {
                if (deltatime >= a->chip_uptime)
                        a->chip_uptime = 0;
                else
                        a->chip_uptime -= deltatime;
        }

        if (test_bit(AF_CHPRST_PENDING, &a->flags)) {
                if (!test_bit(AF_CHPRST_NEEDED, &a->flags) &&
                    !test_bit(AF_CHPRST_DETECTED, &a->flags))
                        esas2r_handle_pending_reset(a, currtime);
        } else {
                if (test_bit(AF_DISC_PENDING, &a->flags))
                        esas2r_disc_check_complete(a);
                if (test_bit(AF_HEARTBEAT_ENB, &a->flags)) {
                        if (test_bit(AF_HEARTBEAT, &a->flags)) {
                                if ((currtime - a->heartbeat_time) >=
                                    ESAS2R_HEARTBEAT_TIME) {
                                        clear_bit(AF_HEARTBEAT, &a->flags);
                                        esas2r_hdebug("heartbeat failed");
                                        esas2r_log(ESAS2R_LOG_CRIT,
                                                   "heartbeat failed");
                                        esas2r_bugon();
                                        esas2r_local_reset_adapter(a);
                                }
                        } else {
                                set_bit(AF_HEARTBEAT, &a->flags);
                                a->heartbeat_time = currtime;
                                esas2r_force_interrupt(a);
                        }
                }
        }

        if (atomic_read(&a->disable_cnt) == 0)
                esas2r_do_deferred_processes(a);
}

/*
 * Send the specified task management function to the target and LUN
 * specified in rqaux.  in addition, immediately abort any commands that
 * are queued but not sent to the device according to the rules specified
 * by the task management function.
 */
bool esas2r_send_task_mgmt(struct esas2r_adapter *a,
                           struct esas2r_request *rqaux, u8 task_mgt_func)
{
        u16 targetid = rqaux->target_id;
        u8 lun = (u8)le32_to_cpu(rqaux->vrq->scsi.flags);
        bool ret = false;
        struct esas2r_request *rq;
        struct list_head *next, *element;
        unsigned long flags;

        LIST_HEAD(comp_list);

        esas2r_trace_enter();
        esas2r_trace("rqaux:%p", rqaux);
        esas2r_trace("task_mgt_func:%x", task_mgt_func);
        spin_lock_irqsave(&a->queue_lock, flags);

        /* search the defer queue looking for requests for the device */
        list_for_each_safe(element, next, &a->defer_list) {
                rq = list_entry(element, struct esas2r_request, req_list);

                if (rq->vrq->scsi.function == VDA_FUNC_SCSI
                    && rq->target_id == targetid
                    && (((u8)le32_to_cpu(rq->vrq->scsi.flags)) == lun
                        || task_mgt_func == 0x20)) { /* target reset */
                        /* Found a request affected by the task management */
                        if (rq->req_stat == RS_PENDING) {
                                /*
                                 * The request is pending or waiting.  We can
                                 * safelycomplete the request now.
                                 */
                                if (esas2r_ioreq_aborted(a, rq, RS_ABORTED))
                                        list_add_tail(&rq->comp_list,
                                                      &comp_list);
                        }
                }
        }

        /* Send the task management request to the firmware */
        rqaux->sense_len = 0;
        rqaux->vrq->scsi.length = 0;
        rqaux->target_id = targetid;
        rqaux->vrq->scsi.flags |= cpu_to_le32(lun);
        memset(rqaux->vrq->scsi.cdb, 0, sizeof(rqaux->vrq->scsi.cdb));
        rqaux->vrq->scsi.flags |=
                cpu_to_le16(task_mgt_func * LOBIT(FCP_CMND_TM_MASK));

        if (test_bit(AF_FLASHING, &a->flags)) {
                /* Assume success.  if there are active requests, return busy */
                rqaux->req_stat = RS_SUCCESS;

                list_for_each_safe(element, next, &a->active_list) {
                        rq = list_entry(element, struct esas2r_request,
                                        req_list);
                        if (rq->vrq->scsi.function == VDA_FUNC_SCSI
                            && rq->target_id == targetid
                            && (((u8)le32_to_cpu(rq->vrq->scsi.flags)) == lun
                                || task_mgt_func == 0x20))  /* target reset */
                                rqaux->req_stat = RS_BUSY;
                }

                ret = true;
        }

        spin_unlock_irqrestore(&a->queue_lock, flags);

        if (!test_bit(AF_FLASHING, &a->flags))
                esas2r_start_request(a, rqaux);

        esas2r_comp_list_drain(a, &comp_list);

        if (atomic_read(&a->disable_cnt) == 0)
                esas2r_do_deferred_processes(a);

        esas2r_trace_exit();

        return ret;
}

void esas2r_reset_bus(struct esas2r_adapter *a)
{
        esas2r_log(ESAS2R_LOG_INFO, "performing a bus reset");

        if (!test_bit(AF_DEGRADED_MODE, &a->flags) &&
            !test_bit(AF_CHPRST_PENDING, &a->flags) &&
            !test_bit(AF_DISC_PENDING, &a->flags)) {
                set_bit(AF_BUSRST_NEEDED, &a->flags);
                set_bit(AF_BUSRST_PENDING, &a->flags);
                set_bit(AF_OS_RESET, &a->flags);

                esas2r_schedule_tasklet(a);
        }
}

bool esas2r_ioreq_aborted(struct esas2r_adapter *a, struct esas2r_request *rq,
                          u8 status)
{
        esas2r_trace_enter();
        esas2r_trace("rq:%p", rq);
        list_del_init(&rq->req_list);
        if (rq->timeout > RQ_MAX_TIMEOUT) {
                /*
                 * The request timed out, but we could not abort it because a
                 * chip reset occurred.  Return busy status.
                 */
                rq->req_stat = RS_BUSY;
                esas2r_trace_exit();
                return true;
        }

        rq->req_stat = status;
        esas2r_trace_exit();
        return true;
}