drivers/scsi/lpfc/lpfc_disc.h

   1 /*******************************************************************
   2  * This file is part of the Emulex Linux Device Driver for         *
   3  * Fibre Channel Host Bus Adapters.                                *
   4  * Copyright (C) 2017-2018 Broadcom. All Rights Reserved. The term *
   5  * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.     *
   6  * Copyright (C) 2004-2013 Emulex.  All rights reserved.           *
   7  * EMULEX and SLI are trademarks of Emulex.                        *
   8  * www.broadcom.com                                                *
   9  *                                                                 *
  10  * This program is free software; you can redistribute it and/or   *
  11  * modify it under the terms of version 2 of the GNU General       *
  12  * Public License as published by the Free Software Foundation.    *
  13  * This program is distributed in the hope that it will be useful. *
  14  * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
  15  * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
  16  * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
  17  * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
  18  * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
  19  * more details, a copy of which can be found in the file COPYING  *
  20  * included with this package.                                     *
  21  *******************************************************************/
  22
  23 #define FC_MAX_HOLD_RSCN     32       /* max number of deferred RSCNs */
  24 #define FC_MAX_NS_RSP        64512    /* max size NameServer rsp */
  25 #define FC_MAXLOOP           126      /* max devices supported on a fc loop */
  26 #define LPFC_DISC_FLOGI_TMO  10       /* Discovery FLOGI ratov */
  27
  28
  29 /* This is the protocol dependent definition for a Node List Entry.
  30  * This is used by Fibre Channel protocol to support FCP.
  31  */
  32
  33 /* worker thread events */
  34 enum lpfc_work_type {
  35         LPFC_EVT_ONLINE,
  36         LPFC_EVT_OFFLINE_PREP,
  37         LPFC_EVT_OFFLINE,
  38         LPFC_EVT_WARM_START,
  39         LPFC_EVT_KILL,
  40         LPFC_EVT_ELS_RETRY,
  41         LPFC_EVT_DEV_LOSS,
  42         LPFC_EVT_FASTPATH_MGMT_EVT,
  43         LPFC_EVT_RESET_HBA,
  44 };
  45
  46 /* structure used to queue event to the discovery tasklet */
  47 struct lpfc_work_evt {
  48         struct list_head      evt_listp;
  49         void                 *evt_arg1;
  50         void                 *evt_arg2;
  51         enum lpfc_work_type   evt;
  52 };
  53
  54 struct lpfc_scsi_check_condition_event;
  55 struct lpfc_scsi_varqueuedepth_event;
  56 struct lpfc_scsi_event_header;
  57 struct lpfc_fabric_event_header;
  58 struct lpfc_fcprdchkerr_event;
  59
  60 /* structure used for sending events from fast path */
  61 struct lpfc_fast_path_event {
  62         struct lpfc_work_evt work_evt;
  63         struct lpfc_vport     *vport;
  64         union {
  65                 struct lpfc_scsi_check_condition_event check_cond_evt;
  66                 struct lpfc_scsi_varqueuedepth_event queue_depth_evt;
  67                 struct lpfc_scsi_event_header scsi_evt;
  68                 struct lpfc_fabric_event_header fabric_evt;
  69                 struct lpfc_fcprdchkerr_event read_check_error;
  70         } un;
  71 };
  72
  73 #define LPFC_SLI4_MAX_XRI       1024    /* Used to make the ndlp's xri_bitmap */
  74 #define XRI_BITMAP_ULONGS (LPFC_SLI4_MAX_XRI / BITS_PER_LONG)
  75 struct lpfc_node_rrqs {
  76         unsigned long xri_bitmap[XRI_BITMAP_ULONGS];
  77 };
  78
  79 struct lpfc_nodelist {
  80         struct list_head nlp_listp;
  81         struct lpfc_name nlp_portname;
  82         struct lpfc_name nlp_nodename;
  83         uint32_t         nlp_flag;              /* entry flags */
  84         uint32_t         nlp_DID;               /* FC D_ID of entry */
  85         uint32_t         nlp_last_elscmd;       /* Last ELS cmd sent */
  86         uint16_t         nlp_type;
  87 #define NLP_FC_NODE        0x1                  /* entry is an FC node */
  88 #define NLP_FABRIC         0x4                  /* entry rep a Fabric entity */
  89 #define NLP_FCP_TARGET     0x8                  /* entry is an FCP target */
  90 #define NLP_FCP_INITIATOR  0x10                 /* entry is an FCP Initiator */
  91 #define NLP_NVME_TARGET    0x20                 /* entry is a NVME Target */
  92 #define NLP_NVME_INITIATOR 0x40                 /* entry is a NVME Initiator */
  93 #define NLP_NVME_DISCOVERY 0x80                 /* entry has NVME disc srvc */
  94
  95         uint16_t        nlp_fc4_type;           /* FC types node supports. */
  96                                                 /* Assigned from GID_FF, only
  97                                                  * FCP (0x8) and NVME (0x28)
  98                                                  * supported.
  99                                                  */
 100 #define NLP_FC4_NONE    0x0
 101 #define NLP_FC4_FCP     0x1                     /* FC4 Type FCP (value x8)) */
 102 #define NLP_FC4_NVME    0x2                     /* FC4 TYPE NVME (value x28) */
 103
 104         uint16_t        nlp_rpi;
 105         uint16_t        nlp_state;              /* state transition indicator */
 106         uint16_t        nlp_prev_state;         /* state transition indicator */
 107         uint16_t        nlp_xri;                /* output exchange id for RPI */
 108         uint16_t        nlp_sid;                /* scsi id */
 109 #define NLP_NO_SID              0xffff
 110         uint16_t        nlp_maxframe;           /* Max RCV frame size */
 111         uint8_t         nlp_class_sup;          /* Supported Classes */
 112         uint8_t         nlp_retry;              /* used for ELS retries */
 113         uint8_t         nlp_fcp_info;           /* class info, bits 0-3 */
 114 #define NLP_FCP_2_DEVICE   0x10                 /* FCP-2 device */
 115         u8              nlp_nvme_info;          /* NVME NSLER Support */
 116 #define NLP_NVME_NSLER     0x1                  /* NVME NSLER device */
 117
 118         uint16_t        nlp_usg_map;    /* ndlp management usage bitmap */
 119 #define NLP_USG_NODE_ACT_BIT    0x1     /* Indicate ndlp is actively used */
 120 #define NLP_USG_IACT_REQ_BIT    0x2     /* Request to inactivate ndlp */
 121 #define NLP_USG_FREE_REQ_BIT    0x4     /* Request to invoke ndlp memory free */
 122 #define NLP_USG_FREE_ACK_BIT    0x8     /* Indicate ndlp memory free invoked */
 123
 124         struct timer_list   nlp_delayfunc;      /* Used for delayed ELS cmds */
 125         struct lpfc_hba *phba;
 126         struct fc_rport *rport;         /* scsi_transport_fc port structure */
 127         struct lpfc_nvme_rport *nrport; /* nvme transport rport struct. */
 128         struct lpfc_vport *vport;
 129         struct lpfc_work_evt els_retry_evt;
 130         struct lpfc_work_evt dev_loss_evt;
 131         struct kref     kref;
 132         atomic_t cmd_pending;
 133         uint32_t cmd_qdepth;
 134         unsigned long last_change_time;
 135         unsigned long *active_rrqs_xri_bitmap;
 136         struct lpfc_scsicmd_bkt *lat_data;      /* Latency data */
 137         uint32_t fc4_prli_sent;
 138         uint32_t upcall_flags;
 139 #define NLP_WAIT_FOR_UNREG    0x1
 140
 141         uint32_t nvme_fb_size; /* NVME target's supported byte cnt */
 142 #define NVME_FB_BIT_SHIFT 9    /* PRLI Rsp first burst in 512B units. */
 143         uint32_t nlp_defer_did;
 144 };
 145 struct lpfc_node_rrq {
 146         struct list_head list;
 147         uint16_t xritag;
 148         uint16_t send_rrq;
 149         uint16_t rxid;
 150         uint32_t         nlp_DID;               /* FC D_ID of entry */
 151         struct lpfc_vport *vport;
 152         struct lpfc_nodelist *ndlp;
 153         unsigned long rrq_stop_time;
 154 };
 155
 156 #define lpfc_ndlp_check_qdepth(phba, ndlp) \
 157         (ndlp->cmd_qdepth < phba->sli4_hba.max_cfg_param.max_xri)
 158
 159 /* Defines for nlp_flag (uint32) */
 160 #define NLP_IGNR_REG_CMPL  0x00000001 /* Rcvd rscn before we cmpl reg login */
 161 #define NLP_REG_LOGIN_SEND 0x00000002   /* sent reglogin to adapter */
 162 #define NLP_RELEASE_RPI    0x00000004   /* Release RPI to free pool */
 163 #define NLP_SUPPRESS_RSP   0x00000010   /* Remote NPort supports suppress rsp */
 164 #define NLP_PLOGI_SND      0x00000020   /* sent PLOGI request for this entry */
 165 #define NLP_PRLI_SND       0x00000040   /* sent PRLI request for this entry */
 166 #define NLP_ADISC_SND      0x00000080   /* sent ADISC request for this entry */
 167 #define NLP_LOGO_SND       0x00000100   /* sent LOGO request for this entry */
 168 #define NLP_RNID_SND       0x00000400   /* sent RNID request for this entry */
 169 #define NLP_ELS_SND_MASK   0x000007e0   /* sent ELS request for this entry */
 170 #define NLP_NVMET_RECOV    0x00001000   /* NVMET auditing node for recovery. */
 171 #define NLP_FCP_PRLI_RJT   0x00002000   /* Rport does not support FCP PRLI. */
 172 #define NLP_UNREG_INP      0x00008000   /* UNREG_RPI cmd is in progress */
 173 #define NLP_DEFER_RM       0x00010000   /* Remove this ndlp if no longer used */
 174 #define NLP_DELAY_TMO      0x00020000   /* delay timeout is running for node */
 175 #define NLP_NPR_2B_DISC    0x00040000   /* node is included in num_disc_nodes */
 176 #define NLP_RCV_PLOGI      0x00080000   /* Rcv'ed PLOGI from remote system */
 177 #define NLP_LOGO_ACC       0x00100000   /* Process LOGO after ACC completes */
 178 #define NLP_TGT_NO_SCSIID  0x00200000   /* good PRLI but no binding for scsid */
 179 #define NLP_ISSUE_LOGO     0x00400000   /* waiting to issue a LOGO */
 180 #define NLP_IN_DEV_LOSS    0x00800000   /* devloss in progress */
 181 #define NLP_ACC_REGLOGIN   0x01000000   /* Issue Reg Login after successful
 182                                            ACC */
 183 #define NLP_NPR_ADISC      0x02000000   /* Issue ADISC when dq'ed from
 184                                            NPR list */
 185 #define NLP_RM_DFLT_RPI    0x04000000   /* need to remove leftover dflt RPI */
 186 #define NLP_NODEV_REMOVE   0x08000000   /* Defer removal till discovery ends */
 187 #define NLP_TARGET_REMOVE  0x10000000   /* Target remove in process */
 188 #define NLP_SC_REQ         0x20000000   /* Target requires authentication */
 189 #define NLP_FIRSTBURST     0x40000000   /* Target supports FirstBurst */
 190 #define NLP_RPI_REGISTERED 0x80000000   /* nlp_rpi is valid */
 191
 192
 193 /* ndlp usage management macros */
 194 #define NLP_CHK_NODE_ACT(ndlp)          (((ndlp)->nlp_usg_map \
 195                                                 & NLP_USG_NODE_ACT_BIT) \
 196                                         && \
 197                                         !((ndlp)->nlp_usg_map \
 198                                                 & NLP_USG_FREE_ACK_BIT))
 199 #define NLP_SET_NODE_ACT(ndlp)          ((ndlp)->nlp_usg_map \
 200                                                 |= NLP_USG_NODE_ACT_BIT)
 201 #define NLP_INT_NODE_ACT(ndlp)          ((ndlp)->nlp_usg_map \
 202                                                 = NLP_USG_NODE_ACT_BIT)
 203 #define NLP_CLR_NODE_ACT(ndlp)          ((ndlp)->nlp_usg_map \
 204                                                 &= ~NLP_USG_NODE_ACT_BIT)
 205 #define NLP_CHK_IACT_REQ(ndlp)          ((ndlp)->nlp_usg_map \
 206                                                 & NLP_USG_IACT_REQ_BIT)
 207 #define NLP_SET_IACT_REQ(ndlp)          ((ndlp)->nlp_usg_map \
 208                                                 |= NLP_USG_IACT_REQ_BIT)
 209 #define NLP_CHK_FREE_REQ(ndlp)          ((ndlp)->nlp_usg_map \
 210                                                 & NLP_USG_FREE_REQ_BIT)
 211 #define NLP_SET_FREE_REQ(ndlp)          ((ndlp)->nlp_usg_map \
 212                                                 |= NLP_USG_FREE_REQ_BIT)
 213 #define NLP_CHK_FREE_ACK(ndlp)          ((ndlp)->nlp_usg_map \
 214                                                 & NLP_USG_FREE_ACK_BIT)
 215 #define NLP_SET_FREE_ACK(ndlp)          ((ndlp)->nlp_usg_map \
 216                                                 |= NLP_USG_FREE_ACK_BIT)
 217
 218 /* There are 4 different double linked lists nodelist entries can reside on.
 219  * The Port Login (PLOGI) list and Address Discovery (ADISC) list are used
 220  * when Link Up discovery or Registered State Change Notification (RSCN)
 221  * processing is needed.  Each list holds the nodes that require a PLOGI or
 222  * ADISC Extended Link Service (ELS) request.  These lists keep track of the
 223  * nodes affected by an RSCN, or a Link Up (Typically, all nodes are effected
 224  * by Link Up) event.  The unmapped_list contains all nodes that have
 225  * successfully logged into at the Fibre Channel level.  The
 226  * mapped_list will contain all nodes that are mapped FCP targets.
 227  *
 228  * The bind list is a list of undiscovered (potentially non-existent) nodes
 229  * that we have saved binding information on. This information is used when
 230  * nodes transition from the unmapped to the mapped list.
 231  */
 232
 233 /* Defines for nlp_state */
 234 #define NLP_STE_UNUSED_NODE       0x0   /* node is just allocated */
 235 #define NLP_STE_PLOGI_ISSUE       0x1   /* PLOGI was sent to NL_PORT */
 236 #define NLP_STE_ADISC_ISSUE       0x2   /* ADISC was sent to NL_PORT */
 237 #define NLP_STE_REG_LOGIN_ISSUE   0x3   /* REG_LOGIN was issued for NL_PORT */
 238 #define NLP_STE_PRLI_ISSUE        0x4   /* PRLI was sent to NL_PORT */
 239 #define NLP_STE_LOGO_ISSUE        0x5   /* LOGO was sent to NL_PORT */
 240 #define NLP_STE_UNMAPPED_NODE     0x6   /* PRLI completed from NL_PORT */
 241 #define NLP_STE_MAPPED_NODE       0x7   /* Identified as a FCP Target */
 242 #define NLP_STE_NPR_NODE          0x8   /* NPort disappeared */
 243 #define NLP_STE_MAX_STATE         0x9
 244 #define NLP_STE_FREED_NODE        0xff  /* node entry was freed to MEM_NLP */
 245
 246 /* For UNUSED_NODE state, the node has just been allocated.
 247  * For PLOGI_ISSUE and REG_LOGIN_ISSUE, the node is on
 248  * the PLOGI list. For REG_LOGIN_COMPL, the node is taken off the PLOGI list
 249  * and put on the unmapped list. For ADISC processing, the node is taken off
 250  * the ADISC list and placed on either the mapped or unmapped list (depending
 251  * on its previous state). Once on the unmapped list, a PRLI is issued and the
 252  * state changed to PRLI_ISSUE. When the PRLI completion occurs, the state is
 253  * changed to PRLI_COMPL. If the completion indicates a mapped
 254  * node, the node is taken off the unmapped list. The binding list is checked
 255  * for a valid binding, or a binding is automatically assigned. If binding
 256  * assignment is unsuccessful, the node is left on the unmapped list. If
 257  * binding assignment is successful, the associated binding list entry (if
 258  * any) is removed, and the node is placed on the mapped list.
 259  */
 260 /*
 261  * For a Link Down, all nodes on the ADISC, PLOGI, unmapped or mapped
 262  * lists will receive a DEVICE_RECOVERY event. If the linkdown or devloss timers
 263  * expire, all effected nodes will receive a DEVICE_RM event.
 264  */
 265 /*
 266  * For a Link Up or RSCN, all nodes will move from the mapped / unmapped lists
 267  * to either the ADISC or PLOGI list.  After a Nameserver query or ALPA loopmap
 268  * check, additional nodes may be added (DEVICE_ADD) or removed (DEVICE_RM) to /
 269  * from the PLOGI or ADISC lists. Once the PLOGI and ADISC lists are populated,
 270  * we will first process the ADISC list.  32 entries are processed initially and
 271  * ADISC is initited for each one.  Completions / Events for each node are
 272  * funnelled thru the state machine.  As each node finishes ADISC processing, it
 273  * starts ADISC for any nodes waiting for ADISC processing. If no nodes are
 274  * waiting, and the ADISC list count is identically 0, then we are done. For
 275  * Link Up discovery, since all nodes on the PLOGI list are UNREG_LOGIN'ed, we
 276  * can issue a CLEAR_LA and reenable Link Events. Next we will process the PLOGI
 277  * list.  32 entries are processed initially and PLOGI is initited for each one.
 278  * Completions / Events for each node are funnelled thru the state machine.  As
 279  * each node finishes PLOGI processing, it starts PLOGI for any nodes waiting
 280  * for PLOGI processing. If no nodes are waiting, and the PLOGI list count is
 281  * identically 0, then we are done. We have now completed discovery / RSCN
 282  * handling. Upon completion, ALL nodes should be on either the mapped or
 283  * unmapped lists.
 284  */
 285
 286 /* Defines for Node List Entry Events that could happen */
 287 #define NLP_EVT_RCV_PLOGI         0x0   /* Rcv'd an ELS PLOGI command */
 288 #define NLP_EVT_RCV_PRLI          0x1   /* Rcv'd an ELS PRLI  command */
 289 #define NLP_EVT_RCV_LOGO          0x2   /* Rcv'd an ELS LOGO  command */
 290 #define NLP_EVT_RCV_ADISC         0x3   /* Rcv'd an ELS ADISC command */
 291 #define NLP_EVT_RCV_PDISC         0x4   /* Rcv'd an ELS PDISC command */
 292 #define NLP_EVT_RCV_PRLO          0x5   /* Rcv'd an ELS PRLO  command */
 293 #define NLP_EVT_CMPL_PLOGI        0x6   /* Sent an ELS PLOGI command */
 294 #define NLP_EVT_CMPL_PRLI         0x7   /* Sent an ELS PRLI  command */
 295 #define NLP_EVT_CMPL_LOGO         0x8   /* Sent an ELS LOGO  command */
 296 #define NLP_EVT_CMPL_ADISC        0x9   /* Sent an ELS ADISC command */
 297 #define NLP_EVT_CMPL_REG_LOGIN    0xa   /* REG_LOGIN mbox cmd completed */
 298 #define NLP_EVT_DEVICE_RM         0xb   /* Device not found in NS / ALPAmap */
 299 #define NLP_EVT_DEVICE_RECOVERY   0xc   /* Device existence unknown */
 300 #define NLP_EVT_MAX_EVENT         0xd
 301 #define NLP_EVT_NOTHING_PENDING   0xff