?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / scsi / sym53c8xx_2 / sym_fw.c
blob6d7651a7847e82704111e121febb897f96f63794
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Device driver for the SYMBIOS/LSILOGIC 53C8XX and 53C1010 family
4 * of PCI-SCSI IO processors.
5 *
6 * Copyright (C) 1999-2001 Gerard Roudier <groudier@free.fr>
7 *
8 * This driver is derived from the Linux sym53c8xx driver.
9 * Copyright (C) 1998-2000 Gerard Roudier
10 *
11 * The sym53c8xx driver is derived from the ncr53c8xx driver that had been
12 * a port of the FreeBSD ncr driver to Linux-1.2.13.
13 *
14 * The original ncr driver has been written for 386bsd and FreeBSD by
15 * Wolfgang Stanglmeier <wolf@cologne.de>
16 * Stefan Esser <se@mi.Uni-Koeln.de>
17 * Copyright (C) 1994 Wolfgang Stanglmeier
18 *
19 * Other major contributions:
20 *
21 * NVRAM detection and reading.
22 * Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
23 *
24 *-----------------------------------------------------------------------------
25 */
26
27 #include "sym_glue.h"
28
29 /*
30 * Macros used for all firmwares.
31 */
32 #define SYM_GEN_A(s, label) ((short) offsetof(s, label)),
33 #define SYM_GEN_B(s, label) ((short) offsetof(s, label)),
34 #define SYM_GEN_Z(s, label) ((short) offsetof(s, label)),
35 #define PADDR_A(label) SYM_GEN_PADDR_A(struct SYM_FWA_SCR, label)
36 #define PADDR_B(label) SYM_GEN_PADDR_B(struct SYM_FWB_SCR, label)
37
38
39 #if SYM_CONF_GENERIC_SUPPORT
40 /*
41 * Allocate firmware #1 script area.
42 */
43 #define SYM_FWA_SCR sym_fw1a_scr
44 #define SYM_FWB_SCR sym_fw1b_scr
45 #define SYM_FWZ_SCR sym_fw1z_scr
46 #include "sym_fw1.h"
47 static struct sym_fwa_ofs sym_fw1a_ofs = {
48 SYM_GEN_FW_A(struct SYM_FWA_SCR)
49 };
50 static struct sym_fwb_ofs sym_fw1b_ofs = {
51 SYM_GEN_FW_B(struct SYM_FWB_SCR)
52 };
53 static struct sym_fwz_ofs sym_fw1z_ofs = {
54 SYM_GEN_FW_Z(struct SYM_FWZ_SCR)
55 };
56 #undef SYM_FWA_SCR
57 #undef SYM_FWB_SCR
58 #undef SYM_FWZ_SCR
59 #endif /* SYM_CONF_GENERIC_SUPPORT */
60
61 /*
62 * Allocate firmware #2 script area.
63 */
64 #define SYM_FWA_SCR sym_fw2a_scr
65 #define SYM_FWB_SCR sym_fw2b_scr
66 #define SYM_FWZ_SCR sym_fw2z_scr
67 #include "sym_fw2.h"
68 static struct sym_fwa_ofs sym_fw2a_ofs = {
69 SYM_GEN_FW_A(struct SYM_FWA_SCR)
70 };
71 static struct sym_fwb_ofs sym_fw2b_ofs = {
72 SYM_GEN_FW_B(struct SYM_FWB_SCR)
73 SYM_GEN_B(struct SYM_FWB_SCR, start64)
74 SYM_GEN_B(struct SYM_FWB_SCR, pm_handle)
75 };
76 static struct sym_fwz_ofs sym_fw2z_ofs = {
77 SYM_GEN_FW_Z(struct SYM_FWZ_SCR)
78 };
79 #undef SYM_FWA_SCR
80 #undef SYM_FWB_SCR
81 #undef SYM_FWZ_SCR
82
83 #undef SYM_GEN_A
84 #undef SYM_GEN_B
85 #undef SYM_GEN_Z
86 #undef PADDR_A
87 #undef PADDR_B
88
89 #if SYM_CONF_GENERIC_SUPPORT
90 /*
91 * Patch routine for firmware #1.
92 */
93 static void
94 sym_fw1_patch(struct Scsi_Host *shost)
95 {
96 struct sym_hcb *np = sym_get_hcb(shost);
97 struct sym_fw1a_scr *scripta0;
98 struct sym_fw1b_scr *scriptb0;
99
100 scripta0 = (struct sym_fw1a_scr *) np->scripta0;
101 scriptb0 = (struct sym_fw1b_scr *) np->scriptb0;
102
103 /*
104 * Remove LED support if not needed.
105 */
106 if (!(np->features & FE_LED0)) {
107 scripta0->idle[0] = cpu_to_scr(SCR_NO_OP);
108 scripta0->reselected[0] = cpu_to_scr(SCR_NO_OP);
109 scripta0->start[0] = cpu_to_scr(SCR_NO_OP);
110 }
111
112 #ifdef SYM_CONF_IARB_SUPPORT
113 /*
114 * If user does not want to use IMMEDIATE ARBITRATION
115 * when we are reselected while attempting to arbitrate,
116 * patch the SCRIPTS accordingly with a SCRIPT NO_OP.
117 */
118 if (!SYM_CONF_SET_IARB_ON_ARB_LOST)
119 scripta0->ungetjob[0] = cpu_to_scr(SCR_NO_OP);
120 #endif
121 /*
122 * Patch some data in SCRIPTS.
123 * - start and done queue initial bus address.
124 * - target bus address table bus address.
125 */
126 scriptb0->startpos[0] = cpu_to_scr(np->squeue_ba);
127 scriptb0->done_pos[0] = cpu_to_scr(np->dqueue_ba);
128 scriptb0->targtbl[0] = cpu_to_scr(np->targtbl_ba);
129 }
130 #endif /* SYM_CONF_GENERIC_SUPPORT */
131
132 /*
133 * Patch routine for firmware #2.
134 */
135 static void
136 sym_fw2_patch(struct Scsi_Host *shost)
137 {
138 struct sym_data *sym_data = shost_priv(shost);
139 struct pci_dev *pdev = sym_data->pdev;
140 struct sym_hcb *np = sym_data->ncb;
141 struct sym_fw2a_scr *scripta0;
142 struct sym_fw2b_scr *scriptb0;
143
144 scripta0 = (struct sym_fw2a_scr *) np->scripta0;
145 scriptb0 = (struct sym_fw2b_scr *) np->scriptb0;
146
147 /*
148 * Remove LED support if not needed.
149 */
150 if (!(np->features & FE_LED0)) {
151 scripta0->idle[0] = cpu_to_scr(SCR_NO_OP);
152 scripta0->reselected[0] = cpu_to_scr(SCR_NO_OP);
153 scripta0->start[0] = cpu_to_scr(SCR_NO_OP);
154 }
155
156 #if SYM_CONF_DMA_ADDRESSING_MODE == 2
157 /*
158 * Remove useless 64 bit DMA specific SCRIPTS,
159 * when this feature is not available.
160 */
161 if (!use_dac(np)) {
162 scripta0->is_dmap_dirty[0] = cpu_to_scr(SCR_NO_OP);
163 scripta0->is_dmap_dirty[1] = 0;
164 scripta0->is_dmap_dirty[2] = cpu_to_scr(SCR_NO_OP);
165 scripta0->is_dmap_dirty[3] = 0;
166 }
167 #endif
168
169 #ifdef SYM_CONF_IARB_SUPPORT
170 /*
171 * If user does not want to use IMMEDIATE ARBITRATION
172 * when we are reselected while attempting to arbitrate,
173 * patch the SCRIPTS accordingly with a SCRIPT NO_OP.
174 */
175 if (!SYM_CONF_SET_IARB_ON_ARB_LOST)
176 scripta0->ungetjob[0] = cpu_to_scr(SCR_NO_OP);
177 #endif
178 /*
179 * Patch some variable in SCRIPTS.
180 * - start and done queue initial bus address.
181 * - target bus address table bus address.
182 */
183 scriptb0->startpos[0] = cpu_to_scr(np->squeue_ba);
184 scriptb0->done_pos[0] = cpu_to_scr(np->dqueue_ba);
185 scriptb0->targtbl[0] = cpu_to_scr(np->targtbl_ba);
186
187 /*
188 * Remove the load of SCNTL4 on reselection if not a C10.
189 */
190 if (!(np->features & FE_C10)) {
191 scripta0->resel_scntl4[0] = cpu_to_scr(SCR_NO_OP);
192 scripta0->resel_scntl4[1] = cpu_to_scr(0);
193 }
194
195 /*
196 * Remove a couple of work-arounds specific to C1010 if
197 * they are not desirable. See `sym_fw2.h' for more details.
198 */
199 if (!(pdev->device == PCI_DEVICE_ID_LSI_53C1010_66 &&
200 pdev->revision < 0x1 &&
201 np->pciclk_khz < 60000)) {
202 scripta0->datao_phase[0] = cpu_to_scr(SCR_NO_OP);
203 scripta0->datao_phase[1] = cpu_to_scr(0);
204 }
205 if (!(pdev->device == PCI_DEVICE_ID_LSI_53C1010_33 /* &&
206 pdev->revision < 0xff */)) {
207 scripta0->sel_done[0] = cpu_to_scr(SCR_NO_OP);
208 scripta0->sel_done[1] = cpu_to_scr(0);
209 }
210
211 /*
212 * Patch some other variables in SCRIPTS.
213 * These ones are loaded by the SCRIPTS processor.
214 */
215 scriptb0->pm0_data_addr[0] =
216 cpu_to_scr(np->scripta_ba +
217 offsetof(struct sym_fw2a_scr, pm0_data));
218 scriptb0->pm1_data_addr[0] =
219 cpu_to_scr(np->scripta_ba +
220 offsetof(struct sym_fw2a_scr, pm1_data));
221 }
222
223 /*
224 * Fill the data area in scripts.
225 * To be done for all firmwares.
226 */
227 static void
228 sym_fw_fill_data (u32 *in, u32 *out)
229 {
230 int i;
231
232 for (i = 0; i < SYM_CONF_MAX_SG; i++) {
233 *in++ = SCR_CHMOV_TBL ^ SCR_DATA_IN;
234 *in++ = offsetof (struct sym_dsb, data[i]);
235 *out++ = SCR_CHMOV_TBL ^ SCR_DATA_OUT;
236 *out++ = offsetof (struct sym_dsb, data[i]);
237 }
238 }
239
240 /*
241 * Setup useful script bus addresses.
242 * To be done for all firmwares.
243 */
244 static void
245 sym_fw_setup_bus_addresses(struct sym_hcb *np, struct sym_fw *fw)
246 {
247 u32 *pa;
248 u_short *po;
249 int i;
250
251 /*
252 * Build the bus address table for script A
253 * from the script A offset table.
254 */
255 po = (u_short *) fw->a_ofs;
256 pa = (u32 *) &np->fwa_bas;
257 for (i = 0 ; i < sizeof(np->fwa_bas)/sizeof(u32) ; i++)
258 pa[i] = np->scripta_ba + po[i];
259
260 /*
261 * Same for script B.
262 */
263 po = (u_short *) fw->b_ofs;
264 pa = (u32 *) &np->fwb_bas;
265 for (i = 0 ; i < sizeof(np->fwb_bas)/sizeof(u32) ; i++)
266 pa[i] = np->scriptb_ba + po[i];
267
268 /*
269 * Same for script Z.
270 */
271 po = (u_short *) fw->z_ofs;
272 pa = (u32 *) &np->fwz_bas;
273 for (i = 0 ; i < sizeof(np->fwz_bas)/sizeof(u32) ; i++)
274 pa[i] = np->scriptz_ba + po[i];
275 }
276
277 #if SYM_CONF_GENERIC_SUPPORT
278 /*
279 * Setup routine for firmware #1.
280 */
281 static void
282 sym_fw1_setup(struct sym_hcb *np, struct sym_fw *fw)
283 {
284 struct sym_fw1a_scr *scripta0;
285
286 scripta0 = (struct sym_fw1a_scr *) np->scripta0;
287
288 /*
289 * Fill variable parts in scripts.
290 */
291 sym_fw_fill_data(scripta0->data_in, scripta0->data_out);
292
293 /*
294 * Setup bus addresses used from the C code..
295 */
296 sym_fw_setup_bus_addresses(np, fw);
297 }
298 #endif /* SYM_CONF_GENERIC_SUPPORT */
299
300 /*
301 * Setup routine for firmware #2.
302 */
303 static void
304 sym_fw2_setup(struct sym_hcb *np, struct sym_fw *fw)
305 {
306 struct sym_fw2a_scr *scripta0;
307
308 scripta0 = (struct sym_fw2a_scr *) np->scripta0;
309
310 /*
311 * Fill variable parts in scripts.
312 */
313 sym_fw_fill_data(scripta0->data_in, scripta0->data_out);
314
315 /*
316 * Setup bus addresses used from the C code..
317 */
318 sym_fw_setup_bus_addresses(np, fw);
319 }
320
321 /*
322 * Allocate firmware descriptors.
323 */
324 #if SYM_CONF_GENERIC_SUPPORT
325 static struct sym_fw sym_fw1 = SYM_FW_ENTRY(sym_fw1, "NCR-generic");
326 #endif /* SYM_CONF_GENERIC_SUPPORT */
327 static struct sym_fw sym_fw2 = SYM_FW_ENTRY(sym_fw2, "LOAD/STORE-based");
328
329 /*
330 * Find the most appropriate firmware for a chip.
331 */
332 struct sym_fw *
333 sym_find_firmware(struct sym_chip *chip)
334 {
335 if (chip->features & FE_LDSTR)
336 return &sym_fw2;
337 #if SYM_CONF_GENERIC_SUPPORT
338 else if (!(chip->features & (FE_PFEN|FE_NOPM|FE_DAC)))
339 return &sym_fw1;
340 #endif
341 else
342 return NULL;
343 }
344
345 /*
346 * Bind a script to physical addresses.
347 */
348 void sym_fw_bind_script(struct sym_hcb *np, u32 *start, int len)
349 {
350 u32 opcode, new, old, tmp1, tmp2;
351 u32 *end, *cur;
352 int relocs;
353
354 cur = start;
355 end = start + len/4;
356
357 while (cur < end) {
358
359 opcode = *cur;
360
361 /*
362 * If we forget to change the length
363 * in scripts, a field will be
364 * padded with 0. This is an illegal
365 * command.
366 */
367 if (opcode == 0) {
368 printf ("%s: ERROR0 IN SCRIPT at %d.\n",
369 sym_name(np), (int) (cur-start));
370 ++cur;
371 continue;
372 };
373
374 /*
375 * We use the bogus value 0xf00ff00f ;-)
376 * to reserve data area in SCRIPTS.
377 */
378 if (opcode == SCR_DATA_ZERO) {
379 *cur++ = 0;
380 continue;
381 }
382
383 if (DEBUG_FLAGS & DEBUG_SCRIPT)
384 printf ("%d: <%x>\n", (int) (cur-start),
385 (unsigned)opcode);
386
387 /*
388 * We don't have to decode ALL commands
389 */
390 switch (opcode >> 28) {
391 case 0xf:
392 /*
393 * LOAD / STORE DSA relative, don't relocate.
394 */
395 relocs = 0;
396 break;
397 case 0xe:
398 /*
399 * LOAD / STORE absolute.
400 */
401 relocs = 1;
402 break;
403 case 0xc:
404 /*
405 * COPY has TWO arguments.
406 */
407 relocs = 2;
408 tmp1 = cur[1];
409 tmp2 = cur[2];
410 if ((tmp1 ^ tmp2) & 3) {
411 printf ("%s: ERROR1 IN SCRIPT at %d.\n",
412 sym_name(np), (int) (cur-start));
413 }
414 /*
415 * If PREFETCH feature not enabled, remove
416 * the NO FLUSH bit if present.
417 */
418 if ((opcode & SCR_NO_FLUSH) &&
419 !(np->features & FE_PFEN)) {
420 opcode = (opcode & ~SCR_NO_FLUSH);
421 }
422 break;
423 case 0x0:
424 /*
425 * MOVE/CHMOV (absolute address)
426 */
427 if (!(np->features & FE_WIDE))
428 opcode = (opcode | OPC_MOVE);
429 relocs = 1;
430 break;
431 case 0x1:
432 /*
433 * MOVE/CHMOV (table indirect)
434 */
435 if (!(np->features & FE_WIDE))
436 opcode = (opcode | OPC_MOVE);
437 relocs = 0;
438 break;
439 #ifdef SYM_CONF_TARGET_ROLE_SUPPORT
440 case 0x2:
441 /*
442 * MOVE/CHMOV in target role (absolute address)
443 */
444 opcode &= ~0x20000000;
445 if (!(np->features & FE_WIDE))
446 opcode = (opcode & ~OPC_TCHMOVE);
447 relocs = 1;
448 break;
449 case 0x3:
450 /*
451 * MOVE/CHMOV in target role (table indirect)
452 */
453 opcode &= ~0x20000000;
454 if (!(np->features & FE_WIDE))
455 opcode = (opcode & ~OPC_TCHMOVE);
456 relocs = 0;
457 break;
458 #endif
459 case 0x8:
460 /*
461 * JUMP / CALL
462 * don't relocate if relative :-)
463 */
464 if (opcode & 0x00800000)
465 relocs = 0;
466 else if ((opcode & 0xf8400000) == 0x80400000)/*JUMP64*/
467 relocs = 2;
468 else
469 relocs = 1;
470 break;
471 case 0x4:
472 case 0x5:
473 case 0x6:
474 case 0x7:
475 relocs = 1;
476 break;
477 default:
478 relocs = 0;
479 break;
480 };
481
482 /*
483 * Scriptify:) the opcode.
484 */
485 *cur++ = cpu_to_scr(opcode);
486
487 /*
488 * If no relocation, assume 1 argument
489 * and just scriptize:) it.
490 */
491 if (!relocs) {
492 *cur = cpu_to_scr(*cur);
493 ++cur;
494 continue;
495 }
496
497 /*
498 * Otherwise performs all needed relocations.
499 */
500 while (relocs--) {
501 old = *cur;
502
503 switch (old & RELOC_MASK) {
504 case RELOC_REGISTER:
505 new = (old & ~RELOC_MASK) + np->mmio_ba;
506 break;
507 case RELOC_LABEL_A:
508 new = (old & ~RELOC_MASK) + np->scripta_ba;
509 break;
510 case RELOC_LABEL_B:
511 new = (old & ~RELOC_MASK) + np->scriptb_ba;
512 break;
513 case RELOC_SOFTC:
514 new = (old & ~RELOC_MASK) + np->hcb_ba;
515 break;
516 case 0:
517 /*
518 * Don't relocate a 0 address.
519 * They are mostly used for patched or
520 * script self-modified areas.
521 */
522 if (old == 0) {
523 new = old;
524 break;
525 }
526 /* fall through */
527 default:
528 new = 0;
529 panic("sym_fw_bind_script: "
530 "weird relocation %x\n", old);
531 break;
532 }
533
534 *cur++ = cpu_to_scr(new);
535 }
536 };
537 }
Linux with added FPC-III support