treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / spi / spi-dw.h
blob1bf5713e047d35c6f44fd329860fa0db490a3e61
1 /* SPDX-License-Identifier: GPL-2.0 */
2 #ifndef DW_SPI_HEADER_H
3 #define DW_SPI_HEADER_H
5 #include <linux/io.h>
6 #include <linux/scatterlist.h>
8 /* Register offsets */
9 #define DW_SPI_CTRL0 0x00
10 #define DW_SPI_CTRL1 0x04
11 #define DW_SPI_SSIENR 0x08
12 #define DW_SPI_MWCR 0x0c
13 #define DW_SPI_SER 0x10
14 #define DW_SPI_BAUDR 0x14
15 #define DW_SPI_TXFLTR 0x18
16 #define DW_SPI_RXFLTR 0x1c
17 #define DW_SPI_TXFLR 0x20
18 #define DW_SPI_RXFLR 0x24
19 #define DW_SPI_SR 0x28
20 #define DW_SPI_IMR 0x2c
21 #define DW_SPI_ISR 0x30
22 #define DW_SPI_RISR 0x34
23 #define DW_SPI_TXOICR 0x38
24 #define DW_SPI_RXOICR 0x3c
25 #define DW_SPI_RXUICR 0x40
26 #define DW_SPI_MSTICR 0x44
27 #define DW_SPI_ICR 0x48
28 #define DW_SPI_DMACR 0x4c
29 #define DW_SPI_DMATDLR 0x50
30 #define DW_SPI_DMARDLR 0x54
31 #define DW_SPI_IDR 0x58
32 #define DW_SPI_VERSION 0x5c
33 #define DW_SPI_DR 0x60
34 #define DW_SPI_CS_OVERRIDE 0xf4
36 /* Bit fields in CTRLR0 */
37 #define SPI_DFS_OFFSET 0
39 #define SPI_FRF_OFFSET 4
40 #define SPI_FRF_SPI 0x0
41 #define SPI_FRF_SSP 0x1
42 #define SPI_FRF_MICROWIRE 0x2
43 #define SPI_FRF_RESV 0x3
45 #define SPI_MODE_OFFSET 6
46 #define SPI_SCPH_OFFSET 6
47 #define SPI_SCOL_OFFSET 7
49 #define SPI_TMOD_OFFSET 8
50 #define SPI_TMOD_MASK (0x3 << SPI_TMOD_OFFSET)
51 #define SPI_TMOD_TR 0x0 /* xmit & recv */
52 #define SPI_TMOD_TO 0x1 /* xmit only */
53 #define SPI_TMOD_RO 0x2 /* recv only */
54 #define SPI_TMOD_EPROMREAD 0x3 /* eeprom read mode */
56 #define SPI_SLVOE_OFFSET 10
57 #define SPI_SRL_OFFSET 11
58 #define SPI_CFS_OFFSET 12
60 /* Bit fields in SR, 7 bits */
61 #define SR_MASK 0x7f /* cover 7 bits */
62 #define SR_BUSY (1 << 0)
63 #define SR_TF_NOT_FULL (1 << 1)
64 #define SR_TF_EMPT (1 << 2)
65 #define SR_RF_NOT_EMPT (1 << 3)
66 #define SR_RF_FULL (1 << 4)
67 #define SR_TX_ERR (1 << 5)
68 #define SR_DCOL (1 << 6)
70 /* Bit fields in ISR, IMR, RISR, 7 bits */
71 #define SPI_INT_TXEI (1 << 0)
72 #define SPI_INT_TXOI (1 << 1)
73 #define SPI_INT_RXUI (1 << 2)
74 #define SPI_INT_RXOI (1 << 3)
75 #define SPI_INT_RXFI (1 << 4)
76 #define SPI_INT_MSTI (1 << 5)
78 /* Bit fields in DMACR */
79 #define SPI_DMA_RDMAE (1 << 0)
80 #define SPI_DMA_TDMAE (1 << 1)
82 /* TX RX interrupt level threshold, max can be 256 */
83 #define SPI_INT_THRESHOLD 32
85 enum dw_ssi_type {
86 SSI_MOTO_SPI = 0,
87 SSI_TI_SSP,
88 SSI_NS_MICROWIRE,
91 struct dw_spi;
92 struct dw_spi_dma_ops {
93 int (*dma_init)(struct dw_spi *dws);
94 void (*dma_exit)(struct dw_spi *dws);
95 int (*dma_setup)(struct dw_spi *dws, struct spi_transfer *xfer);
96 bool (*can_dma)(struct spi_controller *master, struct spi_device *spi,
97 struct spi_transfer *xfer);
98 int (*dma_transfer)(struct dw_spi *dws, struct spi_transfer *xfer);
99 void (*dma_stop)(struct dw_spi *dws);
102 struct dw_spi {
103 struct spi_controller *master;
104 enum dw_ssi_type type;
106 void __iomem *regs;
107 unsigned long paddr;
108 int irq;
109 u32 fifo_len; /* depth of the FIFO buffer */
110 u32 max_freq; /* max bus freq supported */
112 int cs_override;
113 u32 reg_io_width; /* DR I/O width in bytes */
114 u16 bus_num;
115 u16 num_cs; /* supported slave numbers */
116 void (*set_cs)(struct spi_device *spi, bool enable);
118 /* Current message transfer state info */
119 size_t len;
120 void *tx;
121 void *tx_end;
122 spinlock_t buf_lock;
123 void *rx;
124 void *rx_end;
125 int dma_mapped;
126 u8 n_bytes; /* current is a 1/2 bytes op */
127 u32 dma_width;
128 irqreturn_t (*transfer_handler)(struct dw_spi *dws);
129 u32 current_freq; /* frequency in hz */
131 /* DMA info */
132 int dma_inited;
133 struct dma_chan *txchan;
134 struct dma_chan *rxchan;
135 unsigned long dma_chan_busy;
136 dma_addr_t dma_addr; /* phy address of the Data register */
137 const struct dw_spi_dma_ops *dma_ops;
138 void *dma_tx;
139 void *dma_rx;
141 /* Bus interface info */
142 void *priv;
143 #ifdef CONFIG_DEBUG_FS
144 struct dentry *debugfs;
145 #endif
148 static inline u32 dw_readl(struct dw_spi *dws, u32 offset)
150 return __raw_readl(dws->regs + offset);
153 static inline u16 dw_readw(struct dw_spi *dws, u32 offset)
155 return __raw_readw(dws->regs + offset);
158 static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val)
160 __raw_writel(val, dws->regs + offset);
163 static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val)
165 __raw_writew(val, dws->regs + offset);
168 static inline u32 dw_read_io_reg(struct dw_spi *dws, u32 offset)
170 switch (dws->reg_io_width) {
171 case 2:
172 return dw_readw(dws, offset);
173 case 4:
174 default:
175 return dw_readl(dws, offset);
179 static inline void dw_write_io_reg(struct dw_spi *dws, u32 offset, u32 val)
181 switch (dws->reg_io_width) {
182 case 2:
183 dw_writew(dws, offset, val);
184 break;
185 case 4:
186 default:
187 dw_writel(dws, offset, val);
188 break;
192 static inline void spi_enable_chip(struct dw_spi *dws, int enable)
194 dw_writel(dws, DW_SPI_SSIENR, (enable ? 1 : 0));
197 static inline void spi_set_clk(struct dw_spi *dws, u16 div)
199 dw_writel(dws, DW_SPI_BAUDR, div);
202 /* Disable IRQ bits */
203 static inline void spi_mask_intr(struct dw_spi *dws, u32 mask)
205 u32 new_mask;
207 new_mask = dw_readl(dws, DW_SPI_IMR) & ~mask;
208 dw_writel(dws, DW_SPI_IMR, new_mask);
211 /* Enable IRQ bits */
212 static inline void spi_umask_intr(struct dw_spi *dws, u32 mask)
214 u32 new_mask;
216 new_mask = dw_readl(dws, DW_SPI_IMR) | mask;
217 dw_writel(dws, DW_SPI_IMR, new_mask);
221 * This does disable the SPI controller, interrupts, and re-enable the
222 * controller back. Transmit and receive FIFO buffers are cleared when the
223 * device is disabled.
225 static inline void spi_reset_chip(struct dw_spi *dws)
227 spi_enable_chip(dws, 0);
228 spi_mask_intr(dws, 0xff);
229 spi_enable_chip(dws, 1);
232 static inline void spi_shutdown_chip(struct dw_spi *dws)
234 spi_enable_chip(dws, 0);
235 spi_set_clk(dws, 0);
239 * Each SPI slave device to work with dw_api controller should
240 * has such a structure claiming its working mode (poll or PIO/DMA),
241 * which can be save in the "controller_data" member of the
242 * struct spi_device.
244 struct dw_spi_chip {
245 u8 poll_mode; /* 1 for controller polling mode */
246 u8 type; /* SPI/SSP/MicroWire */
247 void (*cs_control)(u32 command);
250 extern void dw_spi_set_cs(struct spi_device *spi, bool enable);
251 extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws);
252 extern void dw_spi_remove_host(struct dw_spi *dws);
253 extern int dw_spi_suspend_host(struct dw_spi *dws);
254 extern int dw_spi_resume_host(struct dw_spi *dws);
256 /* platform related setup */
257 extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
258 #endif /* DW_SPI_HEADER_H */