treewide: remove redundant IS_ERR() before error code check
[linux/fpc-iii.git] / drivers / staging / fwserial / fwserial.c
blobaec0f19597a94b8d0df2d3781d93f9fb55bbec3b
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3 * FireWire Serial driver
5 * Copyright (C) 2012 Peter Hurley <peter@hurleysoftware.com>
6 */
8 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
10 #include <linux/sched.h>
11 #include <linux/slab.h>
12 #include <linux/device.h>
13 #include <linux/mod_devicetable.h>
14 #include <linux/rculist.h>
15 #include <linux/workqueue.h>
16 #include <linux/ratelimit.h>
17 #include <linux/bug.h>
18 #include <linux/uaccess.h>
20 #include "fwserial.h"
22 inline u64 be32_to_u64(__be32 hi, __be32 lo)
24 return ((u64)be32_to_cpu(hi) << 32 | be32_to_cpu(lo));
27 #define LINUX_VENDOR_ID 0xd00d1eU /* same id used in card root directory */
28 #define FWSERIAL_VERSION 0x00e81cU /* must be unique within LINUX_VENDOR_ID */
30 /* configurable options */
31 static int num_ttys = 4; /* # of std ttys to create per fw_card */
32 /* - doubles as loopback port index */
33 static bool auto_connect = true; /* try to VIRT_CABLE to every peer */
34 static bool create_loop_dev = true; /* create a loopback device for each card */
36 module_param_named(ttys, num_ttys, int, 0644);
37 module_param_named(auto, auto_connect, bool, 0644);
38 module_param_named(loop, create_loop_dev, bool, 0644);
41 * Threshold below which the tty is woken for writing
42 * - should be equal to WAKEUP_CHARS in drivers/tty/n_tty.c because
43 * even if the writer is woken, n_tty_poll() won't set EPOLLOUT until
44 * our fifo is below this level
46 #define WAKEUP_CHARS 256
48 /**
49 * fwserial_list: list of every fw_serial created for each fw_card
50 * See discussion in fwserial_probe.
52 static LIST_HEAD(fwserial_list);
53 static DEFINE_MUTEX(fwserial_list_mutex);
55 /**
56 * port_table: array of tty ports allocated to each fw_card
58 * tty ports are allocated during probe when an fw_serial is first
59 * created for a given fw_card. Ports are allocated in a contiguous block,
60 * each block consisting of 'num_ports' ports.
62 static struct fwtty_port *port_table[MAX_TOTAL_PORTS];
63 static DEFINE_MUTEX(port_table_lock);
64 static bool port_table_corrupt;
65 #define FWTTY_INVALID_INDEX MAX_TOTAL_PORTS
67 #define loop_idx(port) (((port)->index) / num_ports)
68 #define table_idx(loop) ((loop) * num_ports + num_ttys)
70 /* total # of tty ports created per fw_card */
71 static int num_ports;
73 /* slab used as pool for struct fwtty_transactions */
74 static struct kmem_cache *fwtty_txn_cache;
76 struct tty_driver *fwtty_driver;
77 static struct tty_driver *fwloop_driver;
79 static struct dentry *fwserial_debugfs;
81 struct fwtty_transaction;
82 typedef void (*fwtty_transaction_cb)(struct fw_card *card, int rcode,
83 void *data, size_t length,
84 struct fwtty_transaction *txn);
86 struct fwtty_transaction {
87 struct fw_transaction fw_txn;
88 fwtty_transaction_cb callback;
89 struct fwtty_port *port;
90 union {
91 struct dma_pending dma_pended;
95 #define to_device(a, b) (a->b)
96 #define fwtty_err(p, fmt, ...) \
97 dev_err(to_device(p, device), fmt, ##__VA_ARGS__)
98 #define fwtty_info(p, fmt, ...) \
99 dev_info(to_device(p, device), fmt, ##__VA_ARGS__)
100 #define fwtty_notice(p, fmt, ...) \
101 dev_notice(to_device(p, device), fmt, ##__VA_ARGS__)
102 #define fwtty_dbg(p, fmt, ...) \
103 dev_dbg(to_device(p, device), "%s: " fmt, __func__, ##__VA_ARGS__)
104 #define fwtty_err_ratelimited(p, fmt, ...) \
105 dev_err_ratelimited(to_device(p, device), fmt, ##__VA_ARGS__)
107 #ifdef DEBUG
108 static inline void debug_short_write(struct fwtty_port *port, int c, int n)
110 int avail;
112 if (n < c) {
113 spin_lock_bh(&port->lock);
114 avail = dma_fifo_avail(&port->tx_fifo);
115 spin_unlock_bh(&port->lock);
116 fwtty_dbg(port, "short write: avail:%d req:%d wrote:%d\n",
117 avail, c, n);
120 #else
121 #define debug_short_write(port, c, n)
122 #endif
124 static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card,
125 int generation, int id);
127 #ifdef FWTTY_PROFILING
129 static void fwtty_profile_fifo(struct fwtty_port *port, unsigned int *stat)
131 spin_lock_bh(&port->lock);
132 fwtty_profile_data(stat, dma_fifo_avail(&port->tx_fifo));
133 spin_unlock_bh(&port->lock);
136 static void fwtty_dump_profile(struct seq_file *m, struct stats *stats)
138 /* for each stat, print sum of 0 to 2^k, then individually */
139 int k = 4;
140 unsigned int sum;
141 int j;
142 char t[10];
144 snprintf(t, 10, "< %d", 1 << k);
145 seq_printf(m, "\n%14s %6s", " ", t);
146 for (j = k + 1; j < DISTRIBUTION_MAX_INDEX; ++j)
147 seq_printf(m, "%6d", 1 << j);
149 ++k;
150 for (j = 0, sum = 0; j <= k; ++j)
151 sum += stats->reads[j];
152 seq_printf(m, "\n%14s: %6d", "reads", sum);
153 for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
154 seq_printf(m, "%6d", stats->reads[j]);
156 for (j = 0, sum = 0; j <= k; ++j)
157 sum += stats->writes[j];
158 seq_printf(m, "\n%14s: %6d", "writes", sum);
159 for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
160 seq_printf(m, "%6d", stats->writes[j]);
162 for (j = 0, sum = 0; j <= k; ++j)
163 sum += stats->txns[j];
164 seq_printf(m, "\n%14s: %6d", "txns", sum);
165 for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
166 seq_printf(m, "%6d", stats->txns[j]);
168 for (j = 0, sum = 0; j <= k; ++j)
169 sum += stats->unthrottle[j];
170 seq_printf(m, "\n%14s: %6d", "avail @ unthr", sum);
171 for (j = k + 1; j <= DISTRIBUTION_MAX_INDEX; ++j)
172 seq_printf(m, "%6d", stats->unthrottle[j]);
175 #else
176 #define fwtty_profile_fifo(port, stat)
177 #define fwtty_dump_profile(m, stats)
178 #endif
181 * Returns the max receive packet size for the given node
182 * Devices which are OHCI v1.0/ v1.1/ v1.2-draft or RFC 2734 compliant
183 * are required by specification to support max_rec of 8 (512 bytes) or more.
185 static inline int device_max_receive(struct fw_device *fw_device)
187 /* see IEEE 1394-2008 table 8-8 */
188 return min(2 << fw_device->max_rec, 4096);
191 static void fwtty_log_tx_error(struct fwtty_port *port, int rcode)
193 switch (rcode) {
194 case RCODE_SEND_ERROR:
195 fwtty_err_ratelimited(port, "card busy\n");
196 break;
197 case RCODE_ADDRESS_ERROR:
198 fwtty_err_ratelimited(port, "bad unit addr or write length\n");
199 break;
200 case RCODE_DATA_ERROR:
201 fwtty_err_ratelimited(port, "failed rx\n");
202 break;
203 case RCODE_NO_ACK:
204 fwtty_err_ratelimited(port, "missing ack\n");
205 break;
206 case RCODE_BUSY:
207 fwtty_err_ratelimited(port, "remote busy\n");
208 break;
209 default:
210 fwtty_err_ratelimited(port, "failed tx: %d\n", rcode);
214 static void fwtty_common_callback(struct fw_card *card, int rcode,
215 void *payload, size_t len, void *cb_data)
217 struct fwtty_transaction *txn = cb_data;
218 struct fwtty_port *port = txn->port;
220 if (port && rcode != RCODE_COMPLETE)
221 fwtty_log_tx_error(port, rcode);
222 if (txn->callback)
223 txn->callback(card, rcode, payload, len, txn);
224 kmem_cache_free(fwtty_txn_cache, txn);
227 static int fwtty_send_data_async(struct fwtty_peer *peer, int tcode,
228 unsigned long long addr, void *payload,
229 size_t len, fwtty_transaction_cb callback,
230 struct fwtty_port *port)
232 struct fwtty_transaction *txn;
233 int generation;
235 txn = kmem_cache_alloc(fwtty_txn_cache, GFP_ATOMIC);
236 if (!txn)
237 return -ENOMEM;
239 txn->callback = callback;
240 txn->port = port;
242 generation = peer->generation;
243 smp_rmb();
244 fw_send_request(peer->serial->card, &txn->fw_txn, tcode,
245 peer->node_id, generation, peer->speed, addr, payload,
246 len, fwtty_common_callback, txn);
247 return 0;
250 static void fwtty_send_txn_async(struct fwtty_peer *peer,
251 struct fwtty_transaction *txn, int tcode,
252 unsigned long long addr, void *payload,
253 size_t len, fwtty_transaction_cb callback,
254 struct fwtty_port *port)
256 int generation;
258 txn->callback = callback;
259 txn->port = port;
261 generation = peer->generation;
262 smp_rmb();
263 fw_send_request(peer->serial->card, &txn->fw_txn, tcode,
264 peer->node_id, generation, peer->speed, addr, payload,
265 len, fwtty_common_callback, txn);
268 static void __fwtty_restart_tx(struct fwtty_port *port)
270 int len, avail;
272 len = dma_fifo_out_level(&port->tx_fifo);
273 if (len)
274 schedule_delayed_work(&port->drain, 0);
275 avail = dma_fifo_avail(&port->tx_fifo);
277 fwtty_dbg(port, "fifo len: %d avail: %d\n", len, avail);
280 static void fwtty_restart_tx(struct fwtty_port *port)
282 spin_lock_bh(&port->lock);
283 __fwtty_restart_tx(port);
284 spin_unlock_bh(&port->lock);
288 * fwtty_update_port_status - decodes & dispatches line status changes
290 * Note: in loopback, the port->lock is being held. Only use functions that
291 * don't attempt to reclaim the port->lock.
293 static void fwtty_update_port_status(struct fwtty_port *port,
294 unsigned int status)
296 unsigned int delta;
297 struct tty_struct *tty;
299 /* simulated LSR/MSR status from remote */
300 status &= ~MCTRL_MASK;
301 delta = (port->mstatus ^ status) & ~MCTRL_MASK;
302 delta &= ~(status & TIOCM_RNG);
303 port->mstatus = status;
305 if (delta & TIOCM_RNG)
306 ++port->icount.rng;
307 if (delta & TIOCM_DSR)
308 ++port->icount.dsr;
309 if (delta & TIOCM_CAR)
310 ++port->icount.dcd;
311 if (delta & TIOCM_CTS)
312 ++port->icount.cts;
314 fwtty_dbg(port, "status: %x delta: %x\n", status, delta);
316 if (delta & TIOCM_CAR) {
317 tty = tty_port_tty_get(&port->port);
318 if (tty && !C_CLOCAL(tty)) {
319 if (status & TIOCM_CAR)
320 wake_up_interruptible(&port->port.open_wait);
321 else
322 schedule_work(&port->hangup);
324 tty_kref_put(tty);
327 if (delta & TIOCM_CTS) {
328 tty = tty_port_tty_get(&port->port);
329 if (tty && C_CRTSCTS(tty)) {
330 if (tty->hw_stopped) {
331 if (status & TIOCM_CTS) {
332 tty->hw_stopped = 0;
333 if (port->loopback)
334 __fwtty_restart_tx(port);
335 else
336 fwtty_restart_tx(port);
338 } else {
339 if (~status & TIOCM_CTS)
340 tty->hw_stopped = 1;
343 tty_kref_put(tty);
345 } else if (delta & OOB_TX_THROTTLE) {
346 tty = tty_port_tty_get(&port->port);
347 if (tty) {
348 if (tty->hw_stopped) {
349 if (~status & OOB_TX_THROTTLE) {
350 tty->hw_stopped = 0;
351 if (port->loopback)
352 __fwtty_restart_tx(port);
353 else
354 fwtty_restart_tx(port);
356 } else {
357 if (status & OOB_TX_THROTTLE)
358 tty->hw_stopped = 1;
361 tty_kref_put(tty);
364 if (delta & (UART_LSR_BI << 24)) {
365 if (status & (UART_LSR_BI << 24)) {
366 port->break_last = jiffies;
367 schedule_delayed_work(&port->emit_breaks, 0);
368 } else {
369 /* run emit_breaks one last time (if pending) */
370 mod_delayed_work(system_wq, &port->emit_breaks, 0);
374 if (delta & (TIOCM_DSR | TIOCM_CAR | TIOCM_CTS | TIOCM_RNG))
375 wake_up_interruptible(&port->port.delta_msr_wait);
379 * __fwtty_port_line_status - generate 'line status' for indicated port
381 * This function returns a remote 'MSR' state based on the local 'MCR' state,
382 * as if a null modem cable was attached. The actual status is a mangling
383 * of TIOCM_* bits suitable for sending to a peer's status_addr.
385 * Note: caller must be holding port lock
387 static unsigned int __fwtty_port_line_status(struct fwtty_port *port)
389 unsigned int status = 0;
391 /* TODO: add module param to tie RNG to DTR as well */
393 if (port->mctrl & TIOCM_DTR)
394 status |= TIOCM_DSR | TIOCM_CAR;
395 if (port->mctrl & TIOCM_RTS)
396 status |= TIOCM_CTS;
397 if (port->mctrl & OOB_RX_THROTTLE)
398 status |= OOB_TX_THROTTLE;
399 /* emulate BRK as add'l line status */
400 if (port->break_ctl)
401 status |= UART_LSR_BI << 24;
403 return status;
407 * __fwtty_write_port_status - send the port line status to peer
409 * Note: caller must be holding the port lock.
411 static int __fwtty_write_port_status(struct fwtty_port *port)
413 struct fwtty_peer *peer;
414 int err = -ENOENT;
415 unsigned int status = __fwtty_port_line_status(port);
417 rcu_read_lock();
418 peer = rcu_dereference(port->peer);
419 if (peer) {
420 err = fwtty_send_data_async(peer, TCODE_WRITE_QUADLET_REQUEST,
421 peer->status_addr, &status,
422 sizeof(status), NULL, port);
424 rcu_read_unlock();
426 return err;
430 * fwtty_write_port_status - same as above but locked by port lock
432 static int fwtty_write_port_status(struct fwtty_port *port)
434 int err;
436 spin_lock_bh(&port->lock);
437 err = __fwtty_write_port_status(port);
438 spin_unlock_bh(&port->lock);
439 return err;
442 static void fwtty_throttle_port(struct fwtty_port *port)
444 struct tty_struct *tty;
445 unsigned int old;
447 tty = tty_port_tty_get(&port->port);
448 if (!tty)
449 return;
451 spin_lock_bh(&port->lock);
453 old = port->mctrl;
454 port->mctrl |= OOB_RX_THROTTLE;
455 if (C_CRTSCTS(tty))
456 port->mctrl &= ~TIOCM_RTS;
457 if (~old & OOB_RX_THROTTLE)
458 __fwtty_write_port_status(port);
460 spin_unlock_bh(&port->lock);
462 tty_kref_put(tty);
466 * fwtty_do_hangup - wait for ldisc to deliver all pending rx; only then hangup
468 * When the remote has finished tx, and all in-flight rx has been received and
469 * and pushed to the flip buffer, the remote may close its device. This will
470 * drop DTR on the remote which will drop carrier here. Typically, the tty is
471 * hung up when carrier is dropped or lost.
473 * However, there is a race between the hang up and the line discipline
474 * delivering its data to the reader. A hangup will cause the ldisc to flush
475 * (ie., clear) the read buffer and flip buffer. Because of firewire's
476 * relatively high throughput, the ldisc frequently lags well behind the driver,
477 * resulting in lost data (which has already been received and written to
478 * the flip buffer) when the remote closes its end.
480 * Unfortunately, since the flip buffer offers no direct method for determining
481 * if it holds data, ensuring the ldisc has delivered all data is problematic.
484 /* FIXME: drop this workaround when __tty_hangup waits for ldisc completion */
485 static void fwtty_do_hangup(struct work_struct *work)
487 struct fwtty_port *port = to_port(work, hangup);
488 struct tty_struct *tty;
490 schedule_timeout_uninterruptible(msecs_to_jiffies(50));
492 tty = tty_port_tty_get(&port->port);
493 if (tty)
494 tty_vhangup(tty);
495 tty_kref_put(tty);
498 static void fwtty_emit_breaks(struct work_struct *work)
500 struct fwtty_port *port = to_port(to_delayed_work(work), emit_breaks);
501 static const char buf[16];
502 unsigned long now = jiffies;
503 unsigned long elapsed = now - port->break_last;
504 int n, t, c, brk = 0;
506 /* generate breaks at the line rate (but at least 1) */
507 n = (elapsed * port->cps) / HZ + 1;
508 port->break_last = now;
510 fwtty_dbg(port, "sending %d brks\n", n);
512 while (n) {
513 t = min(n, 16);
514 c = tty_insert_flip_string_fixed_flag(&port->port, buf,
515 TTY_BREAK, t);
516 n -= c;
517 brk += c;
518 if (c < t)
519 break;
521 tty_flip_buffer_push(&port->port);
523 if (port->mstatus & (UART_LSR_BI << 24))
524 schedule_delayed_work(&port->emit_breaks, FREQ_BREAKS);
525 port->icount.brk += brk;
528 static int fwtty_rx(struct fwtty_port *port, unsigned char *data, size_t len)
530 int c, n = len;
531 unsigned int lsr;
532 int err = 0;
534 fwtty_dbg(port, "%d\n", n);
535 fwtty_profile_data(port->stats.reads, n);
537 if (port->write_only) {
538 n = 0;
539 goto out;
542 /* disregard break status; breaks are generated by emit_breaks work */
543 lsr = (port->mstatus >> 24) & ~UART_LSR_BI;
545 if (port->overrun)
546 lsr |= UART_LSR_OE;
548 if (lsr & UART_LSR_OE)
549 ++port->icount.overrun;
551 lsr &= port->status_mask;
552 if (lsr & ~port->ignore_mask & UART_LSR_OE) {
553 if (!tty_insert_flip_char(&port->port, 0, TTY_OVERRUN)) {
554 err = -EIO;
555 goto out;
558 port->overrun = false;
560 if (lsr & port->ignore_mask & ~UART_LSR_OE) {
561 /* TODO: don't drop SAK and Magic SysRq here */
562 n = 0;
563 goto out;
566 c = tty_insert_flip_string_fixed_flag(&port->port, data, TTY_NORMAL, n);
567 if (c > 0)
568 tty_flip_buffer_push(&port->port);
569 n -= c;
571 if (n) {
572 port->overrun = true;
573 err = -EIO;
574 fwtty_err_ratelimited(port, "flip buffer overrun\n");
576 } else {
577 /* throttle the sender if remaining flip buffer space has
578 * reached high watermark to avoid losing data which may be
579 * in-flight. Since the AR request context is 32k, that much
580 * data may have _already_ been acked.
582 if (tty_buffer_space_avail(&port->port) < HIGH_WATERMARK)
583 fwtty_throttle_port(port);
586 out:
587 port->icount.rx += len;
588 port->stats.lost += n;
589 return err;
593 * fwtty_port_handler - bus address handler for port reads/writes
594 * @parameters: fw_address_callback_t as specified by firewire core interface
596 * This handler is responsible for handling inbound read/write dma from remotes.
598 static void fwtty_port_handler(struct fw_card *card,
599 struct fw_request *request,
600 int tcode, int destination, int source,
601 int generation,
602 unsigned long long addr,
603 void *data, size_t len,
604 void *callback_data)
606 struct fwtty_port *port = callback_data;
607 struct fwtty_peer *peer;
608 int err;
609 int rcode;
611 /* Only accept rx from the peer virtual-cabled to this port */
612 rcu_read_lock();
613 peer = __fwserial_peer_by_node_id(card, generation, source);
614 rcu_read_unlock();
615 if (!peer || peer != rcu_access_pointer(port->peer)) {
616 rcode = RCODE_ADDRESS_ERROR;
617 fwtty_err_ratelimited(port, "ignoring unauthenticated data\n");
618 goto respond;
621 switch (tcode) {
622 case TCODE_WRITE_QUADLET_REQUEST:
623 if (addr != port->rx_handler.offset || len != 4) {
624 rcode = RCODE_ADDRESS_ERROR;
625 } else {
626 fwtty_update_port_status(port, *(unsigned int *)data);
627 rcode = RCODE_COMPLETE;
629 break;
631 case TCODE_WRITE_BLOCK_REQUEST:
632 if (addr != port->rx_handler.offset + 4 ||
633 len > port->rx_handler.length - 4) {
634 rcode = RCODE_ADDRESS_ERROR;
635 } else {
636 err = fwtty_rx(port, data, len);
637 switch (err) {
638 case 0:
639 rcode = RCODE_COMPLETE;
640 break;
641 case -EIO:
642 rcode = RCODE_DATA_ERROR;
643 break;
644 default:
645 rcode = RCODE_CONFLICT_ERROR;
646 break;
649 break;
651 default:
652 rcode = RCODE_TYPE_ERROR;
655 respond:
656 fw_send_response(card, request, rcode);
660 * fwtty_tx_complete - callback for tx dma
661 * @data: ignored, has no meaning for write txns
662 * @length: ignored, has no meaning for write txns
664 * The writer must be woken here if the fifo has been emptied because it
665 * may have slept if chars_in_buffer was != 0
667 static void fwtty_tx_complete(struct fw_card *card, int rcode,
668 void *data, size_t length,
669 struct fwtty_transaction *txn)
671 struct fwtty_port *port = txn->port;
672 int len;
674 fwtty_dbg(port, "rcode: %d\n", rcode);
676 switch (rcode) {
677 case RCODE_COMPLETE:
678 spin_lock_bh(&port->lock);
679 dma_fifo_out_complete(&port->tx_fifo, &txn->dma_pended);
680 len = dma_fifo_level(&port->tx_fifo);
681 spin_unlock_bh(&port->lock);
683 port->icount.tx += txn->dma_pended.len;
684 break;
686 default:
687 /* TODO: implement retries */
688 spin_lock_bh(&port->lock);
689 dma_fifo_out_complete(&port->tx_fifo, &txn->dma_pended);
690 len = dma_fifo_level(&port->tx_fifo);
691 spin_unlock_bh(&port->lock);
693 port->stats.dropped += txn->dma_pended.len;
696 if (len < WAKEUP_CHARS)
697 tty_port_tty_wakeup(&port->port);
700 static int fwtty_tx(struct fwtty_port *port, bool drain)
702 struct fwtty_peer *peer;
703 struct fwtty_transaction *txn;
704 struct tty_struct *tty;
705 int n, len;
707 tty = tty_port_tty_get(&port->port);
708 if (!tty)
709 return -ENOENT;
711 rcu_read_lock();
712 peer = rcu_dereference(port->peer);
713 if (!peer) {
714 n = -EIO;
715 goto out;
718 if (test_and_set_bit(IN_TX, &port->flags)) {
719 n = -EALREADY;
720 goto out;
723 /* try to write as many dma transactions out as possible */
724 n = -EAGAIN;
725 while (!tty->stopped && !tty->hw_stopped &&
726 !test_bit(STOP_TX, &port->flags)) {
727 txn = kmem_cache_alloc(fwtty_txn_cache, GFP_ATOMIC);
728 if (!txn) {
729 n = -ENOMEM;
730 break;
733 spin_lock_bh(&port->lock);
734 n = dma_fifo_out_pend(&port->tx_fifo, &txn->dma_pended);
735 spin_unlock_bh(&port->lock);
737 fwtty_dbg(port, "out: %u rem: %d\n", txn->dma_pended.len, n);
739 if (n < 0) {
740 kmem_cache_free(fwtty_txn_cache, txn);
741 if (n == -EAGAIN) {
742 ++port->stats.tx_stall;
743 } else if (n == -ENODATA) {
744 fwtty_profile_data(port->stats.txns, 0);
745 } else {
746 ++port->stats.fifo_errs;
747 fwtty_err_ratelimited(port, "fifo err: %d\n",
750 break;
753 fwtty_profile_data(port->stats.txns, txn->dma_pended.len);
755 fwtty_send_txn_async(peer, txn, TCODE_WRITE_BLOCK_REQUEST,
756 peer->fifo_addr, txn->dma_pended.data,
757 txn->dma_pended.len, fwtty_tx_complete,
758 port);
759 ++port->stats.sent;
762 * Stop tx if the 'last view' of the fifo is empty or if
763 * this is the writer and there's not enough data to bother
765 if (n == 0 || (!drain && n < WRITER_MINIMUM))
766 break;
769 if (n >= 0 || n == -EAGAIN || n == -ENOMEM || n == -ENODATA) {
770 spin_lock_bh(&port->lock);
771 len = dma_fifo_out_level(&port->tx_fifo);
772 if (len) {
773 unsigned long delay = (n == -ENOMEM) ? HZ : 1;
775 schedule_delayed_work(&port->drain, delay);
777 len = dma_fifo_level(&port->tx_fifo);
778 spin_unlock_bh(&port->lock);
780 /* wakeup the writer */
781 if (drain && len < WAKEUP_CHARS)
782 tty_wakeup(tty);
785 clear_bit(IN_TX, &port->flags);
786 wake_up_interruptible(&port->wait_tx);
788 out:
789 rcu_read_unlock();
790 tty_kref_put(tty);
791 return n;
794 static void fwtty_drain_tx(struct work_struct *work)
796 struct fwtty_port *port = to_port(to_delayed_work(work), drain);
798 fwtty_tx(port, true);
801 static void fwtty_write_xchar(struct fwtty_port *port, char ch)
803 struct fwtty_peer *peer;
805 ++port->stats.xchars;
807 fwtty_dbg(port, "%02x\n", ch);
809 rcu_read_lock();
810 peer = rcu_dereference(port->peer);
811 if (peer) {
812 fwtty_send_data_async(peer, TCODE_WRITE_BLOCK_REQUEST,
813 peer->fifo_addr, &ch, sizeof(ch),
814 NULL, port);
816 rcu_read_unlock();
819 static struct fwtty_port *fwtty_port_get(unsigned int index)
821 struct fwtty_port *port;
823 if (index >= MAX_TOTAL_PORTS)
824 return NULL;
826 mutex_lock(&port_table_lock);
827 port = port_table[index];
828 if (port)
829 kref_get(&port->serial->kref);
830 mutex_unlock(&port_table_lock);
831 return port;
834 static int fwtty_ports_add(struct fw_serial *serial)
836 int err = -EBUSY;
837 int i, j;
839 if (port_table_corrupt)
840 return err;
842 mutex_lock(&port_table_lock);
843 for (i = 0; i + num_ports <= MAX_TOTAL_PORTS; i += num_ports) {
844 if (!port_table[i]) {
845 for (j = 0; j < num_ports; ++i, ++j) {
846 serial->ports[j]->index = i;
847 port_table[i] = serial->ports[j];
849 err = 0;
850 break;
853 mutex_unlock(&port_table_lock);
854 return err;
857 static void fwserial_destroy(struct kref *kref)
859 struct fw_serial *serial = to_serial(kref, kref);
860 struct fwtty_port **ports = serial->ports;
861 int j, i = ports[0]->index;
863 synchronize_rcu();
865 mutex_lock(&port_table_lock);
866 for (j = 0; j < num_ports; ++i, ++j) {
867 port_table_corrupt |= port_table[i] != ports[j];
868 WARN_ONCE(port_table_corrupt, "port_table[%d]: %p != ports[%d]: %p",
869 i, port_table[i], j, ports[j]);
871 port_table[i] = NULL;
873 mutex_unlock(&port_table_lock);
875 for (j = 0; j < num_ports; ++j) {
876 fw_core_remove_address_handler(&ports[j]->rx_handler);
877 tty_port_destroy(&ports[j]->port);
878 kfree(ports[j]);
880 kfree(serial);
883 static void fwtty_port_put(struct fwtty_port *port)
885 kref_put(&port->serial->kref, fwserial_destroy);
888 static void fwtty_port_dtr_rts(struct tty_port *tty_port, int on)
890 struct fwtty_port *port = to_port(tty_port, port);
892 fwtty_dbg(port, "on/off: %d\n", on);
894 spin_lock_bh(&port->lock);
895 /* Don't change carrier state if this is a console */
896 if (!port->port.console) {
897 if (on)
898 port->mctrl |= TIOCM_DTR | TIOCM_RTS;
899 else
900 port->mctrl &= ~(TIOCM_DTR | TIOCM_RTS);
903 __fwtty_write_port_status(port);
904 spin_unlock_bh(&port->lock);
908 * fwtty_port_carrier_raised: required tty_port operation
910 * This port operation is polled after a tty has been opened and is waiting for
911 * carrier detect -- see drivers/tty/tty_port:tty_port_block_til_ready().
913 static int fwtty_port_carrier_raised(struct tty_port *tty_port)
915 struct fwtty_port *port = to_port(tty_port, port);
916 int rc;
918 rc = (port->mstatus & TIOCM_CAR);
920 fwtty_dbg(port, "%d\n", rc);
922 return rc;
925 static unsigned int set_termios(struct fwtty_port *port, struct tty_struct *tty)
927 unsigned int baud, frame;
929 baud = tty_termios_baud_rate(&tty->termios);
930 tty_termios_encode_baud_rate(&tty->termios, baud, baud);
932 /* compute bit count of 2 frames */
933 frame = 12 + ((C_CSTOPB(tty)) ? 4 : 2) + ((C_PARENB(tty)) ? 2 : 0);
935 switch (C_CSIZE(tty)) {
936 case CS5:
937 frame -= (C_CSTOPB(tty)) ? 1 : 0;
938 break;
939 case CS6:
940 frame += 2;
941 break;
942 case CS7:
943 frame += 4;
944 break;
945 case CS8:
946 frame += 6;
947 break;
950 port->cps = (baud << 1) / frame;
952 port->status_mask = UART_LSR_OE;
953 if (_I_FLAG(tty, BRKINT | PARMRK))
954 port->status_mask |= UART_LSR_BI;
956 port->ignore_mask = 0;
957 if (I_IGNBRK(tty)) {
958 port->ignore_mask |= UART_LSR_BI;
959 if (I_IGNPAR(tty))
960 port->ignore_mask |= UART_LSR_OE;
963 port->write_only = !C_CREAD(tty);
965 /* turn off echo and newline xlat if loopback */
966 if (port->loopback) {
967 tty->termios.c_lflag &= ~(ECHO | ECHOE | ECHOK | ECHOKE |
968 ECHONL | ECHOPRT | ECHOCTL);
969 tty->termios.c_oflag &= ~ONLCR;
972 return baud;
975 static int fwtty_port_activate(struct tty_port *tty_port,
976 struct tty_struct *tty)
978 struct fwtty_port *port = to_port(tty_port, port);
979 unsigned int baud;
980 int err;
982 set_bit(TTY_IO_ERROR, &tty->flags);
984 err = dma_fifo_alloc(&port->tx_fifo, FWTTY_PORT_TXFIFO_LEN,
985 cache_line_size(),
986 port->max_payload,
987 FWTTY_PORT_MAX_PEND_DMA,
988 GFP_KERNEL);
989 if (err)
990 return err;
992 spin_lock_bh(&port->lock);
994 baud = set_termios(port, tty);
996 /* if console, don't change carrier state */
997 if (!port->port.console) {
998 port->mctrl = 0;
999 if (baud != 0)
1000 port->mctrl = TIOCM_DTR | TIOCM_RTS;
1003 if (C_CRTSCTS(tty) && ~port->mstatus & TIOCM_CTS)
1004 tty->hw_stopped = 1;
1006 __fwtty_write_port_status(port);
1007 spin_unlock_bh(&port->lock);
1009 clear_bit(TTY_IO_ERROR, &tty->flags);
1011 return 0;
1015 * fwtty_port_shutdown
1017 * Note: the tty port core ensures this is not the console and
1018 * manages TTY_IO_ERROR properly
1020 static void fwtty_port_shutdown(struct tty_port *tty_port)
1022 struct fwtty_port *port = to_port(tty_port, port);
1024 /* TODO: cancel outstanding transactions */
1026 cancel_delayed_work_sync(&port->emit_breaks);
1027 cancel_delayed_work_sync(&port->drain);
1029 spin_lock_bh(&port->lock);
1030 port->flags = 0;
1031 port->break_ctl = 0;
1032 port->overrun = 0;
1033 __fwtty_write_port_status(port);
1034 dma_fifo_free(&port->tx_fifo);
1035 spin_unlock_bh(&port->lock);
1038 static int fwtty_open(struct tty_struct *tty, struct file *fp)
1040 struct fwtty_port *port = tty->driver_data;
1042 return tty_port_open(&port->port, tty, fp);
1045 static void fwtty_close(struct tty_struct *tty, struct file *fp)
1047 struct fwtty_port *port = tty->driver_data;
1049 tty_port_close(&port->port, tty, fp);
1052 static void fwtty_hangup(struct tty_struct *tty)
1054 struct fwtty_port *port = tty->driver_data;
1056 tty_port_hangup(&port->port);
1059 static void fwtty_cleanup(struct tty_struct *tty)
1061 struct fwtty_port *port = tty->driver_data;
1063 tty->driver_data = NULL;
1064 fwtty_port_put(port);
1067 static int fwtty_install(struct tty_driver *driver, struct tty_struct *tty)
1069 struct fwtty_port *port = fwtty_port_get(tty->index);
1070 int err;
1072 err = tty_standard_install(driver, tty);
1073 if (!err)
1074 tty->driver_data = port;
1075 else
1076 fwtty_port_put(port);
1077 return err;
1080 static int fwloop_install(struct tty_driver *driver, struct tty_struct *tty)
1082 struct fwtty_port *port = fwtty_port_get(table_idx(tty->index));
1083 int err;
1085 err = tty_standard_install(driver, tty);
1086 if (!err)
1087 tty->driver_data = port;
1088 else
1089 fwtty_port_put(port);
1090 return err;
1093 static int fwtty_write(struct tty_struct *tty, const unsigned char *buf, int c)
1095 struct fwtty_port *port = tty->driver_data;
1096 int n, len;
1098 fwtty_dbg(port, "%d\n", c);
1099 fwtty_profile_data(port->stats.writes, c);
1101 spin_lock_bh(&port->lock);
1102 n = dma_fifo_in(&port->tx_fifo, buf, c);
1103 len = dma_fifo_out_level(&port->tx_fifo);
1104 if (len < DRAIN_THRESHOLD)
1105 schedule_delayed_work(&port->drain, 1);
1106 spin_unlock_bh(&port->lock);
1108 if (len >= DRAIN_THRESHOLD)
1109 fwtty_tx(port, false);
1111 debug_short_write(port, c, n);
1113 return (n < 0) ? 0 : n;
1116 static int fwtty_write_room(struct tty_struct *tty)
1118 struct fwtty_port *port = tty->driver_data;
1119 int n;
1121 spin_lock_bh(&port->lock);
1122 n = dma_fifo_avail(&port->tx_fifo);
1123 spin_unlock_bh(&port->lock);
1125 fwtty_dbg(port, "%d\n", n);
1127 return n;
1130 static int fwtty_chars_in_buffer(struct tty_struct *tty)
1132 struct fwtty_port *port = tty->driver_data;
1133 int n;
1135 spin_lock_bh(&port->lock);
1136 n = dma_fifo_level(&port->tx_fifo);
1137 spin_unlock_bh(&port->lock);
1139 fwtty_dbg(port, "%d\n", n);
1141 return n;
1144 static void fwtty_send_xchar(struct tty_struct *tty, char ch)
1146 struct fwtty_port *port = tty->driver_data;
1148 fwtty_dbg(port, "%02x\n", ch);
1150 fwtty_write_xchar(port, ch);
1153 static void fwtty_throttle(struct tty_struct *tty)
1155 struct fwtty_port *port = tty->driver_data;
1158 * Ignore throttling (but not unthrottling).
1159 * It only makes sense to throttle when data will no longer be
1160 * accepted by the tty flip buffer. For example, it is
1161 * possible for received data to overflow the tty buffer long
1162 * before the line discipline ever has a chance to throttle the driver.
1163 * Additionally, the driver may have already completed the I/O
1164 * but the tty buffer is still emptying, so the line discipline is
1165 * throttling and unthrottling nothing.
1168 ++port->stats.throttled;
1171 static void fwtty_unthrottle(struct tty_struct *tty)
1173 struct fwtty_port *port = tty->driver_data;
1175 fwtty_dbg(port, "CRTSCTS: %d\n", C_CRTSCTS(tty) != 0);
1177 fwtty_profile_fifo(port, port->stats.unthrottle);
1179 spin_lock_bh(&port->lock);
1180 port->mctrl &= ~OOB_RX_THROTTLE;
1181 if (C_CRTSCTS(tty))
1182 port->mctrl |= TIOCM_RTS;
1183 __fwtty_write_port_status(port);
1184 spin_unlock_bh(&port->lock);
1187 static int check_msr_delta(struct fwtty_port *port, unsigned long mask,
1188 struct async_icount *prev)
1190 struct async_icount now;
1191 int delta;
1193 now = port->icount;
1195 delta = ((mask & TIOCM_RNG && prev->rng != now.rng) ||
1196 (mask & TIOCM_DSR && prev->dsr != now.dsr) ||
1197 (mask & TIOCM_CAR && prev->dcd != now.dcd) ||
1198 (mask & TIOCM_CTS && prev->cts != now.cts));
1200 *prev = now;
1202 return delta;
1205 static int wait_msr_change(struct fwtty_port *port, unsigned long mask)
1207 struct async_icount prev;
1209 prev = port->icount;
1211 return wait_event_interruptible(port->port.delta_msr_wait,
1212 check_msr_delta(port, mask, &prev));
1215 static int get_serial_info(struct tty_struct *tty,
1216 struct serial_struct *ss)
1218 struct fwtty_port *port = tty->driver_data;
1220 mutex_lock(&port->port.mutex);
1221 ss->type = PORT_UNKNOWN;
1222 ss->line = port->port.tty->index;
1223 ss->flags = port->port.flags;
1224 ss->xmit_fifo_size = FWTTY_PORT_TXFIFO_LEN;
1225 ss->baud_base = 400000000;
1226 ss->close_delay = port->port.close_delay;
1227 mutex_unlock(&port->port.mutex);
1228 return 0;
1231 static int set_serial_info(struct tty_struct *tty,
1232 struct serial_struct *ss)
1234 struct fwtty_port *port = tty->driver_data;
1236 if (ss->irq != 0 || ss->port != 0 || ss->custom_divisor != 0 ||
1237 ss->baud_base != 400000000)
1238 return -EPERM;
1240 mutex_lock(&port->port.mutex);
1241 if (!capable(CAP_SYS_ADMIN)) {
1242 if (((ss->flags & ~ASYNC_USR_MASK) !=
1243 (port->port.flags & ~ASYNC_USR_MASK))) {
1244 mutex_unlock(&port->port.mutex);
1245 return -EPERM;
1248 port->port.close_delay = ss->close_delay * HZ / 100;
1249 mutex_unlock(&port->port.mutex);
1251 return 0;
1254 static int fwtty_ioctl(struct tty_struct *tty, unsigned int cmd,
1255 unsigned long arg)
1257 struct fwtty_port *port = tty->driver_data;
1258 int err;
1260 switch (cmd) {
1261 case TIOCMIWAIT:
1262 err = wait_msr_change(port, arg);
1263 break;
1265 default:
1266 err = -ENOIOCTLCMD;
1269 return err;
1272 static void fwtty_set_termios(struct tty_struct *tty, struct ktermios *old)
1274 struct fwtty_port *port = tty->driver_data;
1275 unsigned int baud;
1277 spin_lock_bh(&port->lock);
1278 baud = set_termios(port, tty);
1280 if ((baud == 0) && (old->c_cflag & CBAUD)) {
1281 port->mctrl &= ~(TIOCM_DTR | TIOCM_RTS);
1282 } else if ((baud != 0) && !(old->c_cflag & CBAUD)) {
1283 if (C_CRTSCTS(tty) || !tty_throttled(tty))
1284 port->mctrl |= TIOCM_DTR | TIOCM_RTS;
1285 else
1286 port->mctrl |= TIOCM_DTR;
1288 __fwtty_write_port_status(port);
1289 spin_unlock_bh(&port->lock);
1291 if (old->c_cflag & CRTSCTS) {
1292 if (!C_CRTSCTS(tty)) {
1293 tty->hw_stopped = 0;
1294 fwtty_restart_tx(port);
1296 } else if (C_CRTSCTS(tty) && ~port->mstatus & TIOCM_CTS) {
1297 tty->hw_stopped = 1;
1302 * fwtty_break_ctl - start/stop sending breaks
1304 * Signals the remote to start or stop generating simulated breaks.
1305 * First, stop dequeueing from the fifo and wait for writer/drain to leave tx
1306 * before signalling the break line status. This guarantees any pending rx will
1307 * be queued to the line discipline before break is simulated on the remote.
1308 * Conversely, turning off break_ctl requires signalling the line status change,
1309 * then enabling tx.
1311 static int fwtty_break_ctl(struct tty_struct *tty, int state)
1313 struct fwtty_port *port = tty->driver_data;
1314 long ret;
1316 fwtty_dbg(port, "%d\n", state);
1318 if (state == -1) {
1319 set_bit(STOP_TX, &port->flags);
1320 ret = wait_event_interruptible_timeout(port->wait_tx,
1321 !test_bit(IN_TX, &port->flags),
1322 10);
1323 if (ret == 0 || ret == -ERESTARTSYS) {
1324 clear_bit(STOP_TX, &port->flags);
1325 fwtty_restart_tx(port);
1326 return -EINTR;
1330 spin_lock_bh(&port->lock);
1331 port->break_ctl = (state == -1);
1332 __fwtty_write_port_status(port);
1333 spin_unlock_bh(&port->lock);
1335 if (state == 0) {
1336 spin_lock_bh(&port->lock);
1337 dma_fifo_reset(&port->tx_fifo);
1338 clear_bit(STOP_TX, &port->flags);
1339 spin_unlock_bh(&port->lock);
1341 return 0;
1344 static int fwtty_tiocmget(struct tty_struct *tty)
1346 struct fwtty_port *port = tty->driver_data;
1347 unsigned int tiocm;
1349 spin_lock_bh(&port->lock);
1350 tiocm = (port->mctrl & MCTRL_MASK) | (port->mstatus & ~MCTRL_MASK);
1351 spin_unlock_bh(&port->lock);
1353 fwtty_dbg(port, "%x\n", tiocm);
1355 return tiocm;
1358 static int fwtty_tiocmset(struct tty_struct *tty,
1359 unsigned int set, unsigned int clear)
1361 struct fwtty_port *port = tty->driver_data;
1363 fwtty_dbg(port, "set: %x clear: %x\n", set, clear);
1365 /* TODO: simulate loopback if TIOCM_LOOP set */
1367 spin_lock_bh(&port->lock);
1368 port->mctrl &= ~(clear & MCTRL_MASK & 0xffff);
1369 port->mctrl |= set & MCTRL_MASK & 0xffff;
1370 __fwtty_write_port_status(port);
1371 spin_unlock_bh(&port->lock);
1372 return 0;
1375 static int fwtty_get_icount(struct tty_struct *tty,
1376 struct serial_icounter_struct *icount)
1378 struct fwtty_port *port = tty->driver_data;
1379 struct stats stats;
1381 memcpy(&stats, &port->stats, sizeof(stats));
1382 if (port->port.console)
1383 (*port->fwcon_ops->stats)(&stats, port->con_data);
1385 icount->cts = port->icount.cts;
1386 icount->dsr = port->icount.dsr;
1387 icount->rng = port->icount.rng;
1388 icount->dcd = port->icount.dcd;
1389 icount->rx = port->icount.rx;
1390 icount->tx = port->icount.tx + stats.xchars;
1391 icount->frame = port->icount.frame;
1392 icount->overrun = port->icount.overrun;
1393 icount->parity = port->icount.parity;
1394 icount->brk = port->icount.brk;
1395 icount->buf_overrun = port->icount.overrun;
1396 return 0;
1399 static void fwtty_proc_show_port(struct seq_file *m, struct fwtty_port *port)
1401 struct stats stats;
1403 memcpy(&stats, &port->stats, sizeof(stats));
1404 if (port->port.console)
1405 (*port->fwcon_ops->stats)(&stats, port->con_data);
1407 seq_printf(m, " addr:%012llx tx:%d rx:%d", port->rx_handler.offset,
1408 port->icount.tx + stats.xchars, port->icount.rx);
1409 seq_printf(m, " cts:%d dsr:%d rng:%d dcd:%d", port->icount.cts,
1410 port->icount.dsr, port->icount.rng, port->icount.dcd);
1411 seq_printf(m, " fe:%d oe:%d pe:%d brk:%d", port->icount.frame,
1412 port->icount.overrun, port->icount.parity, port->icount.brk);
1415 static void fwtty_debugfs_show_port(struct seq_file *m, struct fwtty_port *port)
1417 struct stats stats;
1419 memcpy(&stats, &port->stats, sizeof(stats));
1420 if (port->port.console)
1421 (*port->fwcon_ops->stats)(&stats, port->con_data);
1423 seq_printf(m, " dr:%d st:%d err:%d lost:%d", stats.dropped,
1424 stats.tx_stall, stats.fifo_errs, stats.lost);
1425 seq_printf(m, " pkts:%d thr:%d", stats.sent, stats.throttled);
1427 if (port->port.console) {
1428 seq_puts(m, "\n ");
1429 (*port->fwcon_ops->proc_show)(m, port->con_data);
1432 fwtty_dump_profile(m, &port->stats);
1435 static void fwtty_debugfs_show_peer(struct seq_file *m, struct fwtty_peer *peer)
1437 int generation = peer->generation;
1439 smp_rmb();
1440 seq_printf(m, " %s:", dev_name(&peer->unit->device));
1441 seq_printf(m, " node:%04x gen:%d", peer->node_id, generation);
1442 seq_printf(m, " sp:%d max:%d guid:%016llx", peer->speed,
1443 peer->max_payload, (unsigned long long)peer->guid);
1444 seq_printf(m, " mgmt:%012llx", (unsigned long long)peer->mgmt_addr);
1445 seq_printf(m, " addr:%012llx", (unsigned long long)peer->status_addr);
1446 seq_putc(m, '\n');
1449 static int fwtty_proc_show(struct seq_file *m, void *v)
1451 struct fwtty_port *port;
1452 int i;
1454 seq_puts(m, "fwserinfo: 1.0 driver: 1.0\n");
1455 for (i = 0; i < MAX_TOTAL_PORTS && (port = fwtty_port_get(i)); ++i) {
1456 seq_printf(m, "%2d:", i);
1457 if (capable(CAP_SYS_ADMIN))
1458 fwtty_proc_show_port(m, port);
1459 fwtty_port_put(port);
1460 seq_puts(m, "\n");
1462 return 0;
1465 static int fwtty_stats_show(struct seq_file *m, void *v)
1467 struct fw_serial *serial = m->private;
1468 struct fwtty_port *port;
1469 int i;
1471 for (i = 0; i < num_ports; ++i) {
1472 port = fwtty_port_get(serial->ports[i]->index);
1473 if (port) {
1474 seq_printf(m, "%2d:", port->index);
1475 fwtty_proc_show_port(m, port);
1476 fwtty_debugfs_show_port(m, port);
1477 fwtty_port_put(port);
1478 seq_puts(m, "\n");
1481 return 0;
1483 DEFINE_SHOW_ATTRIBUTE(fwtty_stats);
1485 static int fwtty_peers_show(struct seq_file *m, void *v)
1487 struct fw_serial *serial = m->private;
1488 struct fwtty_peer *peer;
1490 rcu_read_lock();
1491 seq_printf(m, "card: %s guid: %016llx\n",
1492 dev_name(serial->card->device),
1493 (unsigned long long)serial->card->guid);
1494 list_for_each_entry_rcu(peer, &serial->peer_list, list)
1495 fwtty_debugfs_show_peer(m, peer);
1496 rcu_read_unlock();
1497 return 0;
1499 DEFINE_SHOW_ATTRIBUTE(fwtty_peers);
1501 static const struct tty_port_operations fwtty_port_ops = {
1502 .dtr_rts = fwtty_port_dtr_rts,
1503 .carrier_raised = fwtty_port_carrier_raised,
1504 .shutdown = fwtty_port_shutdown,
1505 .activate = fwtty_port_activate,
1508 static const struct tty_operations fwtty_ops = {
1509 .open = fwtty_open,
1510 .close = fwtty_close,
1511 .hangup = fwtty_hangup,
1512 .cleanup = fwtty_cleanup,
1513 .install = fwtty_install,
1514 .write = fwtty_write,
1515 .write_room = fwtty_write_room,
1516 .chars_in_buffer = fwtty_chars_in_buffer,
1517 .send_xchar = fwtty_send_xchar,
1518 .throttle = fwtty_throttle,
1519 .unthrottle = fwtty_unthrottle,
1520 .ioctl = fwtty_ioctl,
1521 .set_termios = fwtty_set_termios,
1522 .break_ctl = fwtty_break_ctl,
1523 .tiocmget = fwtty_tiocmget,
1524 .tiocmset = fwtty_tiocmset,
1525 .get_icount = fwtty_get_icount,
1526 .set_serial = set_serial_info,
1527 .get_serial = get_serial_info,
1528 .proc_show = fwtty_proc_show,
1531 static const struct tty_operations fwloop_ops = {
1532 .open = fwtty_open,
1533 .close = fwtty_close,
1534 .hangup = fwtty_hangup,
1535 .cleanup = fwtty_cleanup,
1536 .install = fwloop_install,
1537 .write = fwtty_write,
1538 .write_room = fwtty_write_room,
1539 .chars_in_buffer = fwtty_chars_in_buffer,
1540 .send_xchar = fwtty_send_xchar,
1541 .throttle = fwtty_throttle,
1542 .unthrottle = fwtty_unthrottle,
1543 .ioctl = fwtty_ioctl,
1544 .set_termios = fwtty_set_termios,
1545 .break_ctl = fwtty_break_ctl,
1546 .tiocmget = fwtty_tiocmget,
1547 .tiocmset = fwtty_tiocmset,
1548 .get_icount = fwtty_get_icount,
1549 .set_serial = set_serial_info,
1550 .get_serial = get_serial_info,
1553 static inline int mgmt_pkt_expected_len(__be16 code)
1555 static const struct fwserial_mgmt_pkt pkt;
1557 switch (be16_to_cpu(code)) {
1558 case FWSC_VIRT_CABLE_PLUG:
1559 return sizeof(pkt.hdr) + sizeof(pkt.plug_req);
1561 case FWSC_VIRT_CABLE_PLUG_RSP: /* | FWSC_RSP_OK */
1562 return sizeof(pkt.hdr) + sizeof(pkt.plug_rsp);
1564 case FWSC_VIRT_CABLE_UNPLUG:
1565 case FWSC_VIRT_CABLE_UNPLUG_RSP:
1566 case FWSC_VIRT_CABLE_PLUG_RSP | FWSC_RSP_NACK:
1567 case FWSC_VIRT_CABLE_UNPLUG_RSP | FWSC_RSP_NACK:
1568 return sizeof(pkt.hdr);
1570 default:
1571 return -1;
1575 static inline void fill_plug_params(struct virt_plug_params *params,
1576 struct fwtty_port *port)
1578 u64 status_addr = port->rx_handler.offset;
1579 u64 fifo_addr = port->rx_handler.offset + 4;
1580 size_t fifo_len = port->rx_handler.length - 4;
1582 params->status_hi = cpu_to_be32(status_addr >> 32);
1583 params->status_lo = cpu_to_be32(status_addr);
1584 params->fifo_hi = cpu_to_be32(fifo_addr >> 32);
1585 params->fifo_lo = cpu_to_be32(fifo_addr);
1586 params->fifo_len = cpu_to_be32(fifo_len);
1589 static inline void fill_plug_req(struct fwserial_mgmt_pkt *pkt,
1590 struct fwtty_port *port)
1592 pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG);
1593 pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
1594 fill_plug_params(&pkt->plug_req, port);
1597 static inline void fill_plug_rsp_ok(struct fwserial_mgmt_pkt *pkt,
1598 struct fwtty_port *port)
1600 pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG_RSP);
1601 pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
1602 fill_plug_params(&pkt->plug_rsp, port);
1605 static inline void fill_plug_rsp_nack(struct fwserial_mgmt_pkt *pkt)
1607 pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_PLUG_RSP | FWSC_RSP_NACK);
1608 pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
1611 static inline void fill_unplug_rsp_nack(struct fwserial_mgmt_pkt *pkt)
1613 pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG_RSP | FWSC_RSP_NACK);
1614 pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
1617 static inline void fill_unplug_rsp_ok(struct fwserial_mgmt_pkt *pkt)
1619 pkt->hdr.code = cpu_to_be16(FWSC_VIRT_CABLE_UNPLUG_RSP);
1620 pkt->hdr.len = cpu_to_be16(mgmt_pkt_expected_len(pkt->hdr.code));
1623 static void fwserial_virt_plug_complete(struct fwtty_peer *peer,
1624 struct virt_plug_params *params)
1626 struct fwtty_port *port = peer->port;
1628 peer->status_addr = be32_to_u64(params->status_hi, params->status_lo);
1629 peer->fifo_addr = be32_to_u64(params->fifo_hi, params->fifo_lo);
1630 peer->fifo_len = be32_to_cpu(params->fifo_len);
1631 peer_set_state(peer, FWPS_ATTACHED);
1633 /* reconfigure tx_fifo optimally for this peer */
1634 spin_lock_bh(&port->lock);
1635 port->max_payload = min(peer->max_payload, peer->fifo_len);
1636 dma_fifo_change_tx_limit(&port->tx_fifo, port->max_payload);
1637 spin_unlock_bh(&peer->port->lock);
1639 if (port->port.console && port->fwcon_ops->notify)
1640 (*port->fwcon_ops->notify)(FWCON_NOTIFY_ATTACH, port->con_data);
1642 fwtty_info(&peer->unit, "peer (guid:%016llx) connected on %s\n",
1643 (unsigned long long)peer->guid, dev_name(port->device));
1646 static inline int fwserial_send_mgmt_sync(struct fwtty_peer *peer,
1647 struct fwserial_mgmt_pkt *pkt)
1649 int generation;
1650 int rcode, tries = 5;
1652 do {
1653 generation = peer->generation;
1654 smp_rmb();
1656 rcode = fw_run_transaction(peer->serial->card,
1657 TCODE_WRITE_BLOCK_REQUEST,
1658 peer->node_id,
1659 generation, peer->speed,
1660 peer->mgmt_addr,
1661 pkt, be16_to_cpu(pkt->hdr.len));
1662 if (rcode == RCODE_BUSY || rcode == RCODE_SEND_ERROR ||
1663 rcode == RCODE_GENERATION) {
1664 fwtty_dbg(&peer->unit, "mgmt write error: %d\n", rcode);
1665 continue;
1666 } else {
1667 break;
1669 } while (--tries > 0);
1670 return rcode;
1674 * fwserial_claim_port - attempt to claim port @ index for peer
1676 * Returns ptr to claimed port or error code (as ERR_PTR())
1677 * Can sleep - must be called from process context
1679 static struct fwtty_port *fwserial_claim_port(struct fwtty_peer *peer,
1680 int index)
1682 struct fwtty_port *port;
1684 if (index < 0 || index >= num_ports)
1685 return ERR_PTR(-EINVAL);
1687 /* must guarantee that previous port releases have completed */
1688 synchronize_rcu();
1690 port = peer->serial->ports[index];
1691 spin_lock_bh(&port->lock);
1692 if (!rcu_access_pointer(port->peer))
1693 rcu_assign_pointer(port->peer, peer);
1694 else
1695 port = ERR_PTR(-EBUSY);
1696 spin_unlock_bh(&port->lock);
1698 return port;
1702 * fwserial_find_port - find avail port and claim for peer
1704 * Returns ptr to claimed port or NULL if none avail
1705 * Can sleep - must be called from process context
1707 static struct fwtty_port *fwserial_find_port(struct fwtty_peer *peer)
1709 struct fwtty_port **ports = peer->serial->ports;
1710 int i;
1712 /* must guarantee that previous port releases have completed */
1713 synchronize_rcu();
1715 /* TODO: implement optional GUID-to-specific port # matching */
1717 /* find an unattached port (but not the loopback port, if present) */
1718 for (i = 0; i < num_ttys; ++i) {
1719 spin_lock_bh(&ports[i]->lock);
1720 if (!ports[i]->peer) {
1721 /* claim port */
1722 rcu_assign_pointer(ports[i]->peer, peer);
1723 spin_unlock_bh(&ports[i]->lock);
1724 return ports[i];
1726 spin_unlock_bh(&ports[i]->lock);
1728 return NULL;
1731 static void fwserial_release_port(struct fwtty_port *port, bool reset)
1733 /* drop carrier (and all other line status) */
1734 if (reset)
1735 fwtty_update_port_status(port, 0);
1737 spin_lock_bh(&port->lock);
1739 /* reset dma fifo max transmission size back to S100 */
1740 port->max_payload = link_speed_to_max_payload(SCODE_100);
1741 dma_fifo_change_tx_limit(&port->tx_fifo, port->max_payload);
1743 RCU_INIT_POINTER(port->peer, NULL);
1744 spin_unlock_bh(&port->lock);
1746 if (port->port.console && port->fwcon_ops->notify)
1747 (*port->fwcon_ops->notify)(FWCON_NOTIFY_DETACH, port->con_data);
1750 static void fwserial_plug_timeout(struct timer_list *t)
1752 struct fwtty_peer *peer = from_timer(peer, t, timer);
1753 struct fwtty_port *port;
1755 spin_lock_bh(&peer->lock);
1756 if (peer->state != FWPS_PLUG_PENDING) {
1757 spin_unlock_bh(&peer->lock);
1758 return;
1761 port = peer_revert_state(peer);
1762 spin_unlock_bh(&peer->lock);
1764 if (port)
1765 fwserial_release_port(port, false);
1769 * fwserial_connect_peer - initiate virtual cable with peer
1771 * Returns 0 if VIRT_CABLE_PLUG request was successfully sent,
1772 * otherwise error code. Must be called from process context.
1774 static int fwserial_connect_peer(struct fwtty_peer *peer)
1776 struct fwtty_port *port;
1777 struct fwserial_mgmt_pkt *pkt;
1778 int err, rcode;
1780 pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
1781 if (!pkt)
1782 return -ENOMEM;
1784 port = fwserial_find_port(peer);
1785 if (!port) {
1786 fwtty_err(&peer->unit, "avail ports in use\n");
1787 err = -EBUSY;
1788 goto free_pkt;
1791 spin_lock_bh(&peer->lock);
1793 /* only initiate VIRT_CABLE_PLUG if peer is currently not attached */
1794 if (peer->state != FWPS_NOT_ATTACHED) {
1795 err = -EBUSY;
1796 goto release_port;
1799 peer->port = port;
1800 peer_set_state(peer, FWPS_PLUG_PENDING);
1802 fill_plug_req(pkt, peer->port);
1804 mod_timer(&peer->timer, jiffies + VIRT_CABLE_PLUG_TIMEOUT);
1805 spin_unlock_bh(&peer->lock);
1807 rcode = fwserial_send_mgmt_sync(peer, pkt);
1809 spin_lock_bh(&peer->lock);
1810 if (peer->state == FWPS_PLUG_PENDING && rcode != RCODE_COMPLETE) {
1811 if (rcode == RCODE_CONFLICT_ERROR)
1812 err = -EAGAIN;
1813 else
1814 err = -EIO;
1815 goto cancel_timer;
1817 spin_unlock_bh(&peer->lock);
1819 kfree(pkt);
1820 return 0;
1822 cancel_timer:
1823 del_timer(&peer->timer);
1824 peer_revert_state(peer);
1825 release_port:
1826 spin_unlock_bh(&peer->lock);
1827 fwserial_release_port(port, false);
1828 free_pkt:
1829 kfree(pkt);
1830 return err;
1834 * fwserial_close_port -
1835 * HUP the tty (if the tty exists) and unregister the tty device.
1836 * Only used by the unit driver upon unit removal to disconnect and
1837 * cleanup all attached ports
1839 * The port reference is put by fwtty_cleanup (if a reference was
1840 * ever taken).
1842 static void fwserial_close_port(struct tty_driver *driver,
1843 struct fwtty_port *port)
1845 struct tty_struct *tty;
1847 mutex_lock(&port->port.mutex);
1848 tty = tty_port_tty_get(&port->port);
1849 if (tty) {
1850 tty_vhangup(tty);
1851 tty_kref_put(tty);
1853 mutex_unlock(&port->port.mutex);
1855 if (driver == fwloop_driver)
1856 tty_unregister_device(driver, loop_idx(port));
1857 else
1858 tty_unregister_device(driver, port->index);
1862 * fwserial_lookup - finds first fw_serial associated with card
1863 * @card: fw_card to match
1865 * NB: caller must be holding fwserial_list_mutex
1867 static struct fw_serial *fwserial_lookup(struct fw_card *card)
1869 struct fw_serial *serial;
1871 list_for_each_entry(serial, &fwserial_list, list) {
1872 if (card == serial->card)
1873 return serial;
1876 return NULL;
1880 * __fwserial_lookup_rcu - finds first fw_serial associated with card
1881 * @card: fw_card to match
1883 * NB: caller must be inside rcu_read_lock() section
1885 static struct fw_serial *__fwserial_lookup_rcu(struct fw_card *card)
1887 struct fw_serial *serial;
1889 list_for_each_entry_rcu(serial, &fwserial_list, list) {
1890 if (card == serial->card)
1891 return serial;
1894 return NULL;
1898 * __fwserial_peer_by_node_id - finds a peer matching the given generation + id
1900 * If a matching peer could not be found for the specified generation/node id,
1901 * this could be because:
1902 * a) the generation has changed and one of the nodes hasn't updated yet
1903 * b) the remote node has created its remote unit device before this
1904 * local node has created its corresponding remote unit device
1905 * In either case, the remote node should retry
1907 * Note: caller must be in rcu_read_lock() section
1909 static struct fwtty_peer *__fwserial_peer_by_node_id(struct fw_card *card,
1910 int generation, int id)
1912 struct fw_serial *serial;
1913 struct fwtty_peer *peer;
1915 serial = __fwserial_lookup_rcu(card);
1916 if (!serial) {
1918 * Something is very wrong - there should be a matching
1919 * fw_serial structure for every fw_card. Maybe the remote node
1920 * has created its remote unit device before this driver has
1921 * been probed for any unit devices...
1923 fwtty_err(card, "unknown card (guid %016llx)\n",
1924 (unsigned long long)card->guid);
1925 return NULL;
1928 list_for_each_entry_rcu(peer, &serial->peer_list, list) {
1929 int g = peer->generation;
1931 smp_rmb();
1932 if (generation == g && id == peer->node_id)
1933 return peer;
1936 return NULL;
1939 #ifdef DEBUG
1940 static void __dump_peer_list(struct fw_card *card)
1942 struct fw_serial *serial;
1943 struct fwtty_peer *peer;
1945 serial = __fwserial_lookup_rcu(card);
1946 if (!serial)
1947 return;
1949 list_for_each_entry_rcu(peer, &serial->peer_list, list) {
1950 int g = peer->generation;
1952 smp_rmb();
1953 fwtty_dbg(card, "peer(%d:%x) guid: %016llx\n",
1954 g, peer->node_id, (unsigned long long)peer->guid);
1957 #else
1958 #define __dump_peer_list(s)
1959 #endif
1961 static void fwserial_auto_connect(struct work_struct *work)
1963 struct fwtty_peer *peer = to_peer(to_delayed_work(work), connect);
1964 int err;
1966 err = fwserial_connect_peer(peer);
1967 if (err == -EAGAIN && ++peer->connect_retries < MAX_CONNECT_RETRIES)
1968 schedule_delayed_work(&peer->connect, CONNECT_RETRY_DELAY);
1971 static void fwserial_peer_workfn(struct work_struct *work)
1973 struct fwtty_peer *peer = to_peer(work, work);
1975 peer->workfn(work);
1979 * fwserial_add_peer - add a newly probed 'serial' unit device as a 'peer'
1980 * @serial: aggregate representing the specific fw_card to add the peer to
1981 * @unit: 'peer' to create and add to peer_list of serial
1983 * Adds a 'peer' (ie, a local or remote 'serial' unit device) to the list of
1984 * peers for a specific fw_card. Optionally, auto-attach this peer to an
1985 * available tty port. This function is called either directly or indirectly
1986 * as a result of a 'serial' unit device being created & probed.
1988 * Note: this function is serialized with fwserial_remove_peer() by the
1989 * fwserial_list_mutex held in fwserial_probe().
1991 * A 1:1 correspondence between an fw_unit and an fwtty_peer is maintained
1992 * via the dev_set_drvdata() for the device of the fw_unit.
1994 static int fwserial_add_peer(struct fw_serial *serial, struct fw_unit *unit)
1996 struct device *dev = &unit->device;
1997 struct fw_device *parent = fw_parent_device(unit);
1998 struct fwtty_peer *peer;
1999 struct fw_csr_iterator ci;
2000 int key, val;
2001 int generation;
2003 peer = kzalloc(sizeof(*peer), GFP_KERNEL);
2004 if (!peer)
2005 return -ENOMEM;
2007 peer_set_state(peer, FWPS_NOT_ATTACHED);
2009 dev_set_drvdata(dev, peer);
2010 peer->unit = unit;
2011 peer->guid = (u64)parent->config_rom[3] << 32 | parent->config_rom[4];
2012 peer->speed = parent->max_speed;
2013 peer->max_payload = min(device_max_receive(parent),
2014 link_speed_to_max_payload(peer->speed));
2016 generation = parent->generation;
2017 smp_rmb();
2018 peer->node_id = parent->node_id;
2019 smp_wmb();
2020 peer->generation = generation;
2022 /* retrieve the mgmt bus addr from the unit directory */
2023 fw_csr_iterator_init(&ci, unit->directory);
2024 while (fw_csr_iterator_next(&ci, &key, &val)) {
2025 if (key == (CSR_OFFSET | CSR_DEPENDENT_INFO)) {
2026 peer->mgmt_addr = CSR_REGISTER_BASE + 4 * val;
2027 break;
2030 if (peer->mgmt_addr == 0ULL) {
2032 * No mgmt address effectively disables VIRT_CABLE_PLUG -
2033 * this peer will not be able to attach to a remote
2035 peer_set_state(peer, FWPS_NO_MGMT_ADDR);
2038 spin_lock_init(&peer->lock);
2039 peer->port = NULL;
2041 timer_setup(&peer->timer, fwserial_plug_timeout, 0);
2042 INIT_WORK(&peer->work, fwserial_peer_workfn);
2043 INIT_DELAYED_WORK(&peer->connect, fwserial_auto_connect);
2045 /* associate peer with specific fw_card */
2046 peer->serial = serial;
2047 list_add_rcu(&peer->list, &serial->peer_list);
2049 fwtty_info(&peer->unit, "peer added (guid:%016llx)\n",
2050 (unsigned long long)peer->guid);
2052 /* identify the local unit & virt cable to loopback port */
2053 if (parent->is_local) {
2054 serial->self = peer;
2055 if (create_loop_dev) {
2056 struct fwtty_port *port;
2058 port = fwserial_claim_port(peer, num_ttys);
2059 if (!IS_ERR(port)) {
2060 struct virt_plug_params params;
2062 spin_lock_bh(&peer->lock);
2063 peer->port = port;
2064 fill_plug_params(&params, port);
2065 fwserial_virt_plug_complete(peer, &params);
2066 spin_unlock_bh(&peer->lock);
2068 fwtty_write_port_status(port);
2072 } else if (auto_connect) {
2073 /* auto-attach to remote units only (if policy allows) */
2074 schedule_delayed_work(&peer->connect, 1);
2077 return 0;
2081 * fwserial_remove_peer - remove a 'serial' unit device as a 'peer'
2083 * Remove a 'peer' from its list of peers. This function is only
2084 * called by fwserial_remove() on bus removal of the unit device.
2086 * Note: this function is serialized with fwserial_add_peer() by the
2087 * fwserial_list_mutex held in fwserial_remove().
2089 static void fwserial_remove_peer(struct fwtty_peer *peer)
2091 struct fwtty_port *port;
2093 spin_lock_bh(&peer->lock);
2094 peer_set_state(peer, FWPS_GONE);
2095 spin_unlock_bh(&peer->lock);
2097 cancel_delayed_work_sync(&peer->connect);
2098 cancel_work_sync(&peer->work);
2100 spin_lock_bh(&peer->lock);
2101 /* if this unit is the local unit, clear link */
2102 if (peer == peer->serial->self)
2103 peer->serial->self = NULL;
2105 /* cancel the request timeout timer (if running) */
2106 del_timer(&peer->timer);
2108 port = peer->port;
2109 peer->port = NULL;
2111 list_del_rcu(&peer->list);
2113 fwtty_info(&peer->unit, "peer removed (guid:%016llx)\n",
2114 (unsigned long long)peer->guid);
2116 spin_unlock_bh(&peer->lock);
2118 if (port)
2119 fwserial_release_port(port, true);
2121 synchronize_rcu();
2122 kfree(peer);
2126 * fwserial_create - init everything to create TTYs for a specific fw_card
2127 * @unit: fw_unit for first 'serial' unit device probed for this fw_card
2129 * This function inits the aggregate structure (an fw_serial instance)
2130 * used to manage the TTY ports registered by a specific fw_card. Also, the
2131 * unit device is added as the first 'peer'.
2133 * This unit device may represent a local unit device (as specified by the
2134 * config ROM unit directory) or it may represent a remote unit device
2135 * (as specified by the reading of the remote node's config ROM).
2137 * Returns 0 to indicate "ownership" of the unit device, or a negative errno
2138 * value to indicate which error.
2140 static int fwserial_create(struct fw_unit *unit)
2142 struct fw_device *parent = fw_parent_device(unit);
2143 struct fw_card *card = parent->card;
2144 struct fw_serial *serial;
2145 struct fwtty_port *port;
2146 struct device *tty_dev;
2147 int i, j;
2148 int err;
2150 serial = kzalloc(sizeof(*serial), GFP_KERNEL);
2151 if (!serial)
2152 return -ENOMEM;
2154 kref_init(&serial->kref);
2155 serial->card = card;
2156 INIT_LIST_HEAD(&serial->peer_list);
2158 for (i = 0; i < num_ports; ++i) {
2159 port = kzalloc(sizeof(*port), GFP_KERNEL);
2160 if (!port) {
2161 err = -ENOMEM;
2162 goto free_ports;
2164 tty_port_init(&port->port);
2165 port->index = FWTTY_INVALID_INDEX;
2166 port->port.ops = &fwtty_port_ops;
2167 port->serial = serial;
2168 tty_buffer_set_limit(&port->port, 128 * 1024);
2170 spin_lock_init(&port->lock);
2171 INIT_DELAYED_WORK(&port->drain, fwtty_drain_tx);
2172 INIT_DELAYED_WORK(&port->emit_breaks, fwtty_emit_breaks);
2173 INIT_WORK(&port->hangup, fwtty_do_hangup);
2174 init_waitqueue_head(&port->wait_tx);
2175 port->max_payload = link_speed_to_max_payload(SCODE_100);
2176 dma_fifo_init(&port->tx_fifo);
2178 RCU_INIT_POINTER(port->peer, NULL);
2179 serial->ports[i] = port;
2181 /* get unique bus addr region for port's status & recv fifo */
2182 port->rx_handler.length = FWTTY_PORT_RXFIFO_LEN + 4;
2183 port->rx_handler.address_callback = fwtty_port_handler;
2184 port->rx_handler.callback_data = port;
2186 * XXX: use custom memory region above cpu physical memory addrs
2187 * this will ease porting to 64-bit firewire adapters
2189 err = fw_core_add_address_handler(&port->rx_handler,
2190 &fw_high_memory_region);
2191 if (err) {
2192 kfree(port);
2193 goto free_ports;
2196 /* preserve i for error cleanup */
2198 err = fwtty_ports_add(serial);
2199 if (err) {
2200 fwtty_err(&unit, "no space in port table\n");
2201 goto free_ports;
2204 for (j = 0; j < num_ttys; ++j) {
2205 tty_dev = tty_port_register_device(&serial->ports[j]->port,
2206 fwtty_driver,
2207 serial->ports[j]->index,
2208 card->device);
2209 if (IS_ERR(tty_dev)) {
2210 err = PTR_ERR(tty_dev);
2211 fwtty_err(&unit, "register tty device error (%d)\n",
2212 err);
2213 goto unregister_ttys;
2216 serial->ports[j]->device = tty_dev;
2218 /* preserve j for error cleanup */
2220 if (create_loop_dev) {
2221 struct device *loop_dev;
2223 loop_dev = tty_port_register_device(&serial->ports[j]->port,
2224 fwloop_driver,
2225 loop_idx(serial->ports[j]),
2226 card->device);
2227 if (IS_ERR(loop_dev)) {
2228 err = PTR_ERR(loop_dev);
2229 fwtty_err(&unit, "create loop device failed (%d)\n",
2230 err);
2231 goto unregister_ttys;
2233 serial->ports[j]->device = loop_dev;
2234 serial->ports[j]->loopback = true;
2237 if (!IS_ERR_OR_NULL(fwserial_debugfs)) {
2238 serial->debugfs = debugfs_create_dir(dev_name(&unit->device),
2239 fwserial_debugfs);
2240 if (!IS_ERR_OR_NULL(serial->debugfs)) {
2241 debugfs_create_file("peers", 0444, serial->debugfs,
2242 serial, &fwtty_peers_fops);
2243 debugfs_create_file("stats", 0444, serial->debugfs,
2244 serial, &fwtty_stats_fops);
2248 list_add_rcu(&serial->list, &fwserial_list);
2250 fwtty_notice(&unit, "TTY over FireWire on device %s (guid %016llx)\n",
2251 dev_name(card->device), (unsigned long long)card->guid);
2253 err = fwserial_add_peer(serial, unit);
2254 if (!err)
2255 return 0;
2257 fwtty_err(&unit, "unable to add peer unit device (%d)\n", err);
2259 /* fall-through to error processing */
2260 debugfs_remove_recursive(serial->debugfs);
2262 list_del_rcu(&serial->list);
2263 if (create_loop_dev)
2264 tty_unregister_device(fwloop_driver,
2265 loop_idx(serial->ports[j]));
2266 unregister_ttys:
2267 for (--j; j >= 0; --j)
2268 tty_unregister_device(fwtty_driver, serial->ports[j]->index);
2269 kref_put(&serial->kref, fwserial_destroy);
2270 return err;
2272 free_ports:
2273 for (--i; i >= 0; --i) {
2274 tty_port_destroy(&serial->ports[i]->port);
2275 kfree(serial->ports[i]);
2277 kfree(serial);
2278 return err;
2282 * fwserial_probe: bus probe function for firewire 'serial' unit devices
2284 * A 'serial' unit device is created and probed as a result of:
2285 * - declaring a ieee1394 bus id table for 'devices' matching a fabricated
2286 * 'serial' unit specifier id
2287 * - adding a unit directory to the config ROM(s) for a 'serial' unit
2289 * The firewire core registers unit devices by enumerating unit directories
2290 * of a node's config ROM after reading the config ROM when a new node is
2291 * added to the bus topology after a bus reset.
2293 * The practical implications of this are:
2294 * - this probe is called for both local and remote nodes that have a 'serial'
2295 * unit directory in their config ROM (that matches the specifiers in
2296 * fwserial_id_table).
2297 * - no specific order is enforced for local vs. remote unit devices
2299 * This unit driver copes with the lack of specific order in the same way the
2300 * firewire net driver does -- each probe, for either a local or remote unit
2301 * device, is treated as a 'peer' (has a struct fwtty_peer instance) and the
2302 * first peer created for a given fw_card (tracked by the global fwserial_list)
2303 * creates the underlying TTYs (aggregated in a fw_serial instance).
2305 * NB: an early attempt to differentiate local & remote unit devices by creating
2306 * peers only for remote units and fw_serial instances (with their
2307 * associated TTY devices) only for local units was discarded. Managing
2308 * the peer lifetimes on device removal proved too complicated.
2310 * fwserial_probe/fwserial_remove are effectively serialized by the
2311 * fwserial_list_mutex. This is necessary because the addition of the first peer
2312 * for a given fw_card will trigger the creation of the fw_serial for that
2313 * fw_card, which must not simultaneously contend with the removal of the
2314 * last peer for a given fw_card triggering the destruction of the same
2315 * fw_serial for the same fw_card.
2317 static int fwserial_probe(struct fw_unit *unit,
2318 const struct ieee1394_device_id *id)
2320 struct fw_serial *serial;
2321 int err;
2323 mutex_lock(&fwserial_list_mutex);
2324 serial = fwserial_lookup(fw_parent_device(unit)->card);
2325 if (!serial)
2326 err = fwserial_create(unit);
2327 else
2328 err = fwserial_add_peer(serial, unit);
2329 mutex_unlock(&fwserial_list_mutex);
2330 return err;
2334 * fwserial_remove: bus removal function for firewire 'serial' unit devices
2336 * The corresponding 'peer' for this unit device is removed from the list of
2337 * peers for the associated fw_serial (which has a 1:1 correspondence with a
2338 * specific fw_card). If this is the last peer being removed, then trigger
2339 * the destruction of the underlying TTYs.
2341 static void fwserial_remove(struct fw_unit *unit)
2343 struct fwtty_peer *peer = dev_get_drvdata(&unit->device);
2344 struct fw_serial *serial = peer->serial;
2345 int i;
2347 mutex_lock(&fwserial_list_mutex);
2348 fwserial_remove_peer(peer);
2350 if (list_empty(&serial->peer_list)) {
2351 /* unlink from the fwserial_list here */
2352 list_del_rcu(&serial->list);
2354 debugfs_remove_recursive(serial->debugfs);
2356 for (i = 0; i < num_ttys; ++i)
2357 fwserial_close_port(fwtty_driver, serial->ports[i]);
2358 if (create_loop_dev)
2359 fwserial_close_port(fwloop_driver, serial->ports[i]);
2360 kref_put(&serial->kref, fwserial_destroy);
2362 mutex_unlock(&fwserial_list_mutex);
2366 * fwserial_update: bus update function for 'firewire' serial unit devices
2368 * Updates the new node_id and bus generation for this peer. Note that locking
2369 * is unnecessary; but careful memory barrier usage is important to enforce the
2370 * load and store order of generation & node_id.
2372 * The fw-core orders the write of node_id before generation in the parent
2373 * fw_device to ensure that a stale node_id cannot be used with a current
2374 * bus generation. So the generation value must be read before the node_id.
2376 * In turn, this orders the write of node_id before generation in the peer to
2377 * also ensure a stale node_id cannot be used with a current bus generation.
2379 static void fwserial_update(struct fw_unit *unit)
2381 struct fw_device *parent = fw_parent_device(unit);
2382 struct fwtty_peer *peer = dev_get_drvdata(&unit->device);
2383 int generation;
2385 generation = parent->generation;
2386 smp_rmb();
2387 peer->node_id = parent->node_id;
2388 smp_wmb();
2389 peer->generation = generation;
2392 static const struct ieee1394_device_id fwserial_id_table[] = {
2394 .match_flags = IEEE1394_MATCH_SPECIFIER_ID |
2395 IEEE1394_MATCH_VERSION,
2396 .specifier_id = LINUX_VENDOR_ID,
2397 .version = FWSERIAL_VERSION,
2402 static struct fw_driver fwserial_driver = {
2403 .driver = {
2404 .owner = THIS_MODULE,
2405 .name = KBUILD_MODNAME,
2406 .bus = &fw_bus_type,
2408 .probe = fwserial_probe,
2409 .update = fwserial_update,
2410 .remove = fwserial_remove,
2411 .id_table = fwserial_id_table,
2414 #define FW_UNIT_SPECIFIER(id) ((CSR_SPECIFIER_ID << 24) | (id))
2415 #define FW_UNIT_VERSION(ver) ((CSR_VERSION << 24) | (ver))
2416 #define FW_UNIT_ADDRESS(ofs) (((CSR_OFFSET | CSR_DEPENDENT_INFO) << 24) \
2417 | (((ofs) - CSR_REGISTER_BASE) >> 2))
2418 /* XXX: config ROM definitons could be improved with semi-automated offset
2419 * and length calculation
2421 #define FW_ROM_LEN(quads) ((quads) << 16)
2422 #define FW_ROM_DESCRIPTOR(ofs) (((CSR_LEAF | CSR_DESCRIPTOR) << 24) | (ofs))
2424 struct fwserial_unit_directory_data {
2425 u32 len_crc;
2426 u32 unit_specifier;
2427 u32 unit_sw_version;
2428 u32 unit_addr_offset;
2429 u32 desc1_ofs;
2430 u32 desc1_len_crc;
2431 u32 desc1_data[5];
2432 } __packed;
2434 static struct fwserial_unit_directory_data fwserial_unit_directory_data = {
2435 .len_crc = FW_ROM_LEN(4),
2436 .unit_specifier = FW_UNIT_SPECIFIER(LINUX_VENDOR_ID),
2437 .unit_sw_version = FW_UNIT_VERSION(FWSERIAL_VERSION),
2438 .desc1_ofs = FW_ROM_DESCRIPTOR(1),
2439 .desc1_len_crc = FW_ROM_LEN(5),
2440 .desc1_data = {
2441 0x00000000, /* type = text */
2442 0x00000000, /* enc = ASCII, lang EN */
2443 0x4c696e75, /* 'Linux TTY' */
2444 0x78205454,
2445 0x59000000,
2449 static struct fw_descriptor fwserial_unit_directory = {
2450 .length = sizeof(fwserial_unit_directory_data) / sizeof(u32),
2451 .key = (CSR_DIRECTORY | CSR_UNIT) << 24,
2452 .data = (u32 *)&fwserial_unit_directory_data,
2456 * The management address is in the unit space region but above other known
2457 * address users (to keep wild writes from causing havoc)
2459 static const struct fw_address_region fwserial_mgmt_addr_region = {
2460 .start = CSR_REGISTER_BASE + 0x1e0000ULL,
2461 .end = 0x1000000000000ULL,
2464 static struct fw_address_handler fwserial_mgmt_addr_handler;
2467 * fwserial_handle_plug_req - handle VIRT_CABLE_PLUG request work
2468 * @work: ptr to peer->work
2470 * Attempts to complete the VIRT_CABLE_PLUG handshake sequence for this peer.
2472 * This checks for a collided request-- ie, that a VIRT_CABLE_PLUG request was
2473 * already sent to this peer. If so, the collision is resolved by comparing
2474 * guid values; the loser sends the plug response.
2476 * Note: if an error prevents a response, don't do anything -- the
2477 * remote will timeout its request.
2479 static void fwserial_handle_plug_req(struct work_struct *work)
2481 struct fwtty_peer *peer = to_peer(work, work);
2482 struct virt_plug_params *plug_req = &peer->work_params.plug_req;
2483 struct fwtty_port *port;
2484 struct fwserial_mgmt_pkt *pkt;
2485 int rcode;
2487 pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
2488 if (!pkt)
2489 return;
2491 port = fwserial_find_port(peer);
2493 spin_lock_bh(&peer->lock);
2495 switch (peer->state) {
2496 case FWPS_NOT_ATTACHED:
2497 if (!port) {
2498 fwtty_err(&peer->unit, "no more ports avail\n");
2499 fill_plug_rsp_nack(pkt);
2500 } else {
2501 peer->port = port;
2502 fill_plug_rsp_ok(pkt, peer->port);
2503 peer_set_state(peer, FWPS_PLUG_RESPONDING);
2504 /* don't release claimed port */
2505 port = NULL;
2507 break;
2509 case FWPS_PLUG_PENDING:
2510 if (peer->serial->card->guid > peer->guid)
2511 goto cleanup;
2513 /* We lost - hijack the already-claimed port and send ok */
2514 del_timer(&peer->timer);
2515 fill_plug_rsp_ok(pkt, peer->port);
2516 peer_set_state(peer, FWPS_PLUG_RESPONDING);
2517 break;
2519 default:
2520 fill_plug_rsp_nack(pkt);
2523 spin_unlock_bh(&peer->lock);
2524 if (port)
2525 fwserial_release_port(port, false);
2527 rcode = fwserial_send_mgmt_sync(peer, pkt);
2529 spin_lock_bh(&peer->lock);
2530 if (peer->state == FWPS_PLUG_RESPONDING) {
2531 if (rcode == RCODE_COMPLETE) {
2532 struct fwtty_port *tmp = peer->port;
2534 fwserial_virt_plug_complete(peer, plug_req);
2535 spin_unlock_bh(&peer->lock);
2537 fwtty_write_port_status(tmp);
2538 spin_lock_bh(&peer->lock);
2539 } else {
2540 fwtty_err(&peer->unit, "PLUG_RSP error (%d)\n", rcode);
2541 port = peer_revert_state(peer);
2544 cleanup:
2545 spin_unlock_bh(&peer->lock);
2546 if (port)
2547 fwserial_release_port(port, false);
2548 kfree(pkt);
2551 static void fwserial_handle_unplug_req(struct work_struct *work)
2553 struct fwtty_peer *peer = to_peer(work, work);
2554 struct fwtty_port *port = NULL;
2555 struct fwserial_mgmt_pkt *pkt;
2556 int rcode;
2558 pkt = kmalloc(sizeof(*pkt), GFP_KERNEL);
2559 if (!pkt)
2560 return;
2562 spin_lock_bh(&peer->lock);
2564 switch (peer->state) {
2565 case FWPS_ATTACHED:
2566 fill_unplug_rsp_ok(pkt);
2567 peer_set_state(peer, FWPS_UNPLUG_RESPONDING);
2568 break;
2570 case FWPS_UNPLUG_PENDING:
2571 if (peer->serial->card->guid > peer->guid)
2572 goto cleanup;
2574 /* We lost - send unplug rsp */
2575 del_timer(&peer->timer);
2576 fill_unplug_rsp_ok(pkt);
2577 peer_set_state(peer, FWPS_UNPLUG_RESPONDING);
2578 break;
2580 default:
2581 fill_unplug_rsp_nack(pkt);
2584 spin_unlock_bh(&peer->lock);
2586 rcode = fwserial_send_mgmt_sync(peer, pkt);
2588 spin_lock_bh(&peer->lock);
2589 if (peer->state == FWPS_UNPLUG_RESPONDING) {
2590 if (rcode != RCODE_COMPLETE)
2591 fwtty_err(&peer->unit, "UNPLUG_RSP error (%d)\n",
2592 rcode);
2593 port = peer_revert_state(peer);
2595 cleanup:
2596 spin_unlock_bh(&peer->lock);
2597 if (port)
2598 fwserial_release_port(port, true);
2599 kfree(pkt);
2602 static int fwserial_parse_mgmt_write(struct fwtty_peer *peer,
2603 struct fwserial_mgmt_pkt *pkt,
2604 unsigned long long addr,
2605 size_t len)
2607 struct fwtty_port *port = NULL;
2608 bool reset = false;
2609 int rcode;
2611 if (addr != fwserial_mgmt_addr_handler.offset || len < sizeof(pkt->hdr))
2612 return RCODE_ADDRESS_ERROR;
2614 if (len != be16_to_cpu(pkt->hdr.len) ||
2615 len != mgmt_pkt_expected_len(pkt->hdr.code))
2616 return RCODE_DATA_ERROR;
2618 spin_lock_bh(&peer->lock);
2619 if (peer->state == FWPS_GONE) {
2621 * This should never happen - it would mean that the
2622 * remote unit that just wrote this transaction was
2623 * already removed from the bus -- and the removal was
2624 * processed before we rec'd this transaction
2626 fwtty_err(&peer->unit, "peer already removed\n");
2627 spin_unlock_bh(&peer->lock);
2628 return RCODE_ADDRESS_ERROR;
2631 rcode = RCODE_COMPLETE;
2633 fwtty_dbg(&peer->unit, "mgmt: hdr.code: %04hx\n", pkt->hdr.code);
2635 switch (be16_to_cpu(pkt->hdr.code) & FWSC_CODE_MASK) {
2636 case FWSC_VIRT_CABLE_PLUG:
2637 if (work_pending(&peer->work)) {
2638 fwtty_err(&peer->unit, "plug req: busy\n");
2639 rcode = RCODE_CONFLICT_ERROR;
2641 } else {
2642 peer->work_params.plug_req = pkt->plug_req;
2643 peer->workfn = fwserial_handle_plug_req;
2644 queue_work(system_unbound_wq, &peer->work);
2646 break;
2648 case FWSC_VIRT_CABLE_PLUG_RSP:
2649 if (peer->state != FWPS_PLUG_PENDING) {
2650 rcode = RCODE_CONFLICT_ERROR;
2652 } else if (be16_to_cpu(pkt->hdr.code) & FWSC_RSP_NACK) {
2653 fwtty_notice(&peer->unit, "NACK plug rsp\n");
2654 port = peer_revert_state(peer);
2656 } else {
2657 struct fwtty_port *tmp = peer->port;
2659 fwserial_virt_plug_complete(peer, &pkt->plug_rsp);
2660 spin_unlock_bh(&peer->lock);
2662 fwtty_write_port_status(tmp);
2663 spin_lock_bh(&peer->lock);
2665 break;
2667 case FWSC_VIRT_CABLE_UNPLUG:
2668 if (work_pending(&peer->work)) {
2669 fwtty_err(&peer->unit, "unplug req: busy\n");
2670 rcode = RCODE_CONFLICT_ERROR;
2671 } else {
2672 peer->workfn = fwserial_handle_unplug_req;
2673 queue_work(system_unbound_wq, &peer->work);
2675 break;
2677 case FWSC_VIRT_CABLE_UNPLUG_RSP:
2678 if (peer->state != FWPS_UNPLUG_PENDING) {
2679 rcode = RCODE_CONFLICT_ERROR;
2680 } else {
2681 if (be16_to_cpu(pkt->hdr.code) & FWSC_RSP_NACK)
2682 fwtty_notice(&peer->unit, "NACK unplug?\n");
2683 port = peer_revert_state(peer);
2684 reset = true;
2686 break;
2688 default:
2689 fwtty_err(&peer->unit, "unknown mgmt code %d\n",
2690 be16_to_cpu(pkt->hdr.code));
2691 rcode = RCODE_DATA_ERROR;
2693 spin_unlock_bh(&peer->lock);
2695 if (port)
2696 fwserial_release_port(port, reset);
2698 return rcode;
2702 * fwserial_mgmt_handler: bus address handler for mgmt requests
2703 * @parameters: fw_address_callback_t as specified by firewire core interface
2705 * This handler is responsible for handling virtual cable requests from remotes
2706 * for all cards.
2708 static void fwserial_mgmt_handler(struct fw_card *card,
2709 struct fw_request *request,
2710 int tcode, int destination, int source,
2711 int generation,
2712 unsigned long long addr,
2713 void *data, size_t len,
2714 void *callback_data)
2716 struct fwserial_mgmt_pkt *pkt = data;
2717 struct fwtty_peer *peer;
2718 int rcode;
2720 rcu_read_lock();
2721 peer = __fwserial_peer_by_node_id(card, generation, source);
2722 if (!peer) {
2723 fwtty_dbg(card, "peer(%d:%x) not found\n", generation, source);
2724 __dump_peer_list(card);
2725 rcode = RCODE_CONFLICT_ERROR;
2727 } else {
2728 switch (tcode) {
2729 case TCODE_WRITE_BLOCK_REQUEST:
2730 rcode = fwserial_parse_mgmt_write(peer, pkt, addr, len);
2731 break;
2733 default:
2734 rcode = RCODE_TYPE_ERROR;
2738 rcu_read_unlock();
2739 fw_send_response(card, request, rcode);
2742 static int __init fwserial_init(void)
2744 int err, num_loops = !!(create_loop_dev);
2746 /* XXX: placeholder for a "firewire" debugfs node */
2747 fwserial_debugfs = debugfs_create_dir(KBUILD_MODNAME, NULL);
2749 /* num_ttys/num_ports must not be set above the static alloc avail */
2750 if (num_ttys + num_loops > MAX_CARD_PORTS)
2751 num_ttys = MAX_CARD_PORTS - num_loops;
2753 num_ports = num_ttys + num_loops;
2755 fwtty_driver = tty_alloc_driver(MAX_TOTAL_PORTS, TTY_DRIVER_REAL_RAW
2756 | TTY_DRIVER_DYNAMIC_DEV);
2757 if (IS_ERR(fwtty_driver)) {
2758 err = PTR_ERR(fwtty_driver);
2759 goto remove_debugfs;
2762 fwtty_driver->driver_name = KBUILD_MODNAME;
2763 fwtty_driver->name = tty_dev_name;
2764 fwtty_driver->major = 0;
2765 fwtty_driver->minor_start = 0;
2766 fwtty_driver->type = TTY_DRIVER_TYPE_SERIAL;
2767 fwtty_driver->subtype = SERIAL_TYPE_NORMAL;
2768 fwtty_driver->init_termios = tty_std_termios;
2769 fwtty_driver->init_termios.c_cflag |= CLOCAL;
2770 tty_set_operations(fwtty_driver, &fwtty_ops);
2772 err = tty_register_driver(fwtty_driver);
2773 if (err) {
2774 pr_err("register tty driver failed (%d)\n", err);
2775 goto put_tty;
2778 if (create_loop_dev) {
2779 fwloop_driver = tty_alloc_driver(MAX_TOTAL_PORTS / num_ports,
2780 TTY_DRIVER_REAL_RAW
2781 | TTY_DRIVER_DYNAMIC_DEV);
2782 if (IS_ERR(fwloop_driver)) {
2783 err = PTR_ERR(fwloop_driver);
2784 goto unregister_driver;
2787 fwloop_driver->driver_name = KBUILD_MODNAME "_loop";
2788 fwloop_driver->name = loop_dev_name;
2789 fwloop_driver->major = 0;
2790 fwloop_driver->minor_start = 0;
2791 fwloop_driver->type = TTY_DRIVER_TYPE_SERIAL;
2792 fwloop_driver->subtype = SERIAL_TYPE_NORMAL;
2793 fwloop_driver->init_termios = tty_std_termios;
2794 fwloop_driver->init_termios.c_cflag |= CLOCAL;
2795 tty_set_operations(fwloop_driver, &fwloop_ops);
2797 err = tty_register_driver(fwloop_driver);
2798 if (err) {
2799 pr_err("register loop driver failed (%d)\n", err);
2800 goto put_loop;
2804 fwtty_txn_cache = kmem_cache_create("fwtty_txn_cache",
2805 sizeof(struct fwtty_transaction),
2806 0, 0, NULL);
2807 if (!fwtty_txn_cache) {
2808 err = -ENOMEM;
2809 goto unregister_loop;
2813 * Ideally, this address handler would be registered per local node
2814 * (rather than the same handler for all local nodes). However,
2815 * since the firewire core requires the config rom descriptor *before*
2816 * the local unit device(s) are created, a single management handler
2817 * must suffice for all local serial units.
2819 fwserial_mgmt_addr_handler.length = sizeof(struct fwserial_mgmt_pkt);
2820 fwserial_mgmt_addr_handler.address_callback = fwserial_mgmt_handler;
2822 err = fw_core_add_address_handler(&fwserial_mgmt_addr_handler,
2823 &fwserial_mgmt_addr_region);
2824 if (err) {
2825 pr_err("add management handler failed (%d)\n", err);
2826 goto destroy_cache;
2829 fwserial_unit_directory_data.unit_addr_offset =
2830 FW_UNIT_ADDRESS(fwserial_mgmt_addr_handler.offset);
2831 err = fw_core_add_descriptor(&fwserial_unit_directory);
2832 if (err) {
2833 pr_err("add unit descriptor failed (%d)\n", err);
2834 goto remove_handler;
2837 err = driver_register(&fwserial_driver.driver);
2838 if (err) {
2839 pr_err("register fwserial driver failed (%d)\n", err);
2840 goto remove_descriptor;
2843 return 0;
2845 remove_descriptor:
2846 fw_core_remove_descriptor(&fwserial_unit_directory);
2847 remove_handler:
2848 fw_core_remove_address_handler(&fwserial_mgmt_addr_handler);
2849 destroy_cache:
2850 kmem_cache_destroy(fwtty_txn_cache);
2851 unregister_loop:
2852 if (create_loop_dev)
2853 tty_unregister_driver(fwloop_driver);
2854 put_loop:
2855 if (create_loop_dev)
2856 put_tty_driver(fwloop_driver);
2857 unregister_driver:
2858 tty_unregister_driver(fwtty_driver);
2859 put_tty:
2860 put_tty_driver(fwtty_driver);
2861 remove_debugfs:
2862 debugfs_remove_recursive(fwserial_debugfs);
2864 return err;
2867 static void __exit fwserial_exit(void)
2869 driver_unregister(&fwserial_driver.driver);
2870 fw_core_remove_descriptor(&fwserial_unit_directory);
2871 fw_core_remove_address_handler(&fwserial_mgmt_addr_handler);
2872 kmem_cache_destroy(fwtty_txn_cache);
2873 if (create_loop_dev) {
2874 tty_unregister_driver(fwloop_driver);
2875 put_tty_driver(fwloop_driver);
2877 tty_unregister_driver(fwtty_driver);
2878 put_tty_driver(fwtty_driver);
2879 debugfs_remove_recursive(fwserial_debugfs);
2882 module_init(fwserial_init);
2883 module_exit(fwserial_exit);
2885 MODULE_AUTHOR("Peter Hurley (peter@hurleysoftware.com)");
2886 MODULE_DESCRIPTION("FireWire Serial TTY Driver");
2887 MODULE_LICENSE("GPL");
2888 MODULE_DEVICE_TABLE(ieee1394, fwserial_id_table);
2889 MODULE_PARM_DESC(ttys, "Number of ttys to create for each local firewire node");
2890 MODULE_PARM_DESC(auto, "Auto-connect a tty to each firewire node discovered");
2891 MODULE_PARM_DESC(loop, "Create a loopback device, fwloop<n>, with ttys");