1 // SPDX-License-Identifier: GPL-2.0
3 * MUSB OTG driver debugfs support
5 * Copyright 2010 Nokia Corporation
6 * Contact: Felipe Balbi <felipe.balbi@nokia.com>
9 #include <linux/module.h>
10 #include <linux/kernel.h>
11 #include <linux/init.h>
12 #include <linux/debugfs.h>
13 #include <linux/seq_file.h>
15 #include <linux/uaccess.h>
17 #include "musb_core.h"
18 #include "musb_debug.h"
20 struct musb_register_map
{
26 static const struct musb_register_map musb_regmap
[] = {
27 { "FAddr", MUSB_FADDR
, 8 },
28 { "Power", MUSB_POWER
, 8 },
29 { "Frame", MUSB_FRAME
, 16 },
30 { "Index", MUSB_INDEX
, 8 },
31 { "Testmode", MUSB_TESTMODE
, 8 },
32 { "TxMaxPp", MUSB_TXMAXP
, 16 },
33 { "TxCSRp", MUSB_TXCSR
, 16 },
34 { "RxMaxPp", MUSB_RXMAXP
, 16 },
35 { "RxCSR", MUSB_RXCSR
, 16 },
36 { "RxCount", MUSB_RXCOUNT
, 16 },
37 { "IntrRxE", MUSB_INTRRXE
, 16 },
38 { "IntrTxE", MUSB_INTRTXE
, 16 },
39 { "IntrUsbE", MUSB_INTRUSBE
, 8 },
40 { "DevCtl", MUSB_DEVCTL
, 8 },
41 { "VControl", 0x68, 32 },
42 { "HWVers", 0x69, 16 },
43 { "LinkInfo", MUSB_LINKINFO
, 8 },
44 { "VPLen", MUSB_VPLEN
, 8 },
45 { "HS_EOF1", MUSB_HS_EOF1
, 8 },
46 { "FS_EOF1", MUSB_FS_EOF1
, 8 },
47 { "LS_EOF1", MUSB_LS_EOF1
, 8 },
48 { "SOFT_RST", 0x7F, 8 },
49 { "DMA_CNTLch0", 0x204, 16 },
50 { "DMA_ADDRch0", 0x208, 32 },
51 { "DMA_COUNTch0", 0x20C, 32 },
52 { "DMA_CNTLch1", 0x214, 16 },
53 { "DMA_ADDRch1", 0x218, 32 },
54 { "DMA_COUNTch1", 0x21C, 32 },
55 { "DMA_CNTLch2", 0x224, 16 },
56 { "DMA_ADDRch2", 0x228, 32 },
57 { "DMA_COUNTch2", 0x22C, 32 },
58 { "DMA_CNTLch3", 0x234, 16 },
59 { "DMA_ADDRch3", 0x238, 32 },
60 { "DMA_COUNTch3", 0x23C, 32 },
61 { "DMA_CNTLch4", 0x244, 16 },
62 { "DMA_ADDRch4", 0x248, 32 },
63 { "DMA_COUNTch4", 0x24C, 32 },
64 { "DMA_CNTLch5", 0x254, 16 },
65 { "DMA_ADDRch5", 0x258, 32 },
66 { "DMA_COUNTch5", 0x25C, 32 },
67 { "DMA_CNTLch6", 0x264, 16 },
68 { "DMA_ADDRch6", 0x268, 32 },
69 { "DMA_COUNTch6", 0x26C, 32 },
70 { "DMA_CNTLch7", 0x274, 16 },
71 { "DMA_ADDRch7", 0x278, 32 },
72 { "DMA_COUNTch7", 0x27C, 32 },
73 { "ConfigData", MUSB_CONFIGDATA
,8 },
74 { "BabbleCtl", MUSB_BABBLE_CTL
,8 },
75 { "TxFIFOsz", MUSB_TXFIFOSZ
, 8 },
76 { "RxFIFOsz", MUSB_RXFIFOSZ
, 8 },
77 { "TxFIFOadd", MUSB_TXFIFOADD
, 16 },
78 { "RxFIFOadd", MUSB_RXFIFOADD
, 16 },
79 { "EPInfo", MUSB_EPINFO
, 8 },
80 { "RAMInfo", MUSB_RAMINFO
, 8 },
81 { } /* Terminating Entry */
84 static int musb_regdump_show(struct seq_file
*s
, void *unused
)
86 struct musb
*musb
= s
->private;
89 seq_printf(s
, "MUSB (M)HDRC Register Dump\n");
90 pm_runtime_get_sync(musb
->controller
);
92 for (i
= 0; i
< ARRAY_SIZE(musb_regmap
); i
++) {
93 switch (musb_regmap
[i
].size
) {
95 seq_printf(s
, "%-12s: %02x\n", musb_regmap
[i
].name
,
96 musb_readb(musb
->mregs
, musb_regmap
[i
].offset
));
99 seq_printf(s
, "%-12s: %04x\n", musb_regmap
[i
].name
,
100 musb_readw(musb
->mregs
, musb_regmap
[i
].offset
));
103 seq_printf(s
, "%-12s: %08x\n", musb_regmap
[i
].name
,
104 musb_readl(musb
->mregs
, musb_regmap
[i
].offset
));
109 pm_runtime_mark_last_busy(musb
->controller
);
110 pm_runtime_put_autosuspend(musb
->controller
);
113 DEFINE_SHOW_ATTRIBUTE(musb_regdump
);
115 static int musb_test_mode_show(struct seq_file
*s
, void *unused
)
117 struct musb
*musb
= s
->private;
120 pm_runtime_get_sync(musb
->controller
);
121 test
= musb_readb(musb
->mregs
, MUSB_TESTMODE
);
122 pm_runtime_mark_last_busy(musb
->controller
);
123 pm_runtime_put_autosuspend(musb
->controller
);
125 if (test
== (MUSB_TEST_FORCE_HOST
| MUSB_TEST_FORCE_FS
))
126 seq_printf(s
, "force host full-speed\n");
128 else if (test
== (MUSB_TEST_FORCE_HOST
| MUSB_TEST_FORCE_HS
))
129 seq_printf(s
, "force host high-speed\n");
131 else if (test
== MUSB_TEST_FORCE_HOST
)
132 seq_printf(s
, "force host\n");
134 else if (test
== MUSB_TEST_FIFO_ACCESS
)
135 seq_printf(s
, "fifo access\n");
137 else if (test
== MUSB_TEST_FORCE_FS
)
138 seq_printf(s
, "force full-speed\n");
140 else if (test
== MUSB_TEST_FORCE_HS
)
141 seq_printf(s
, "force high-speed\n");
143 else if (test
== MUSB_TEST_PACKET
)
144 seq_printf(s
, "test packet\n");
146 else if (test
== MUSB_TEST_K
)
147 seq_printf(s
, "test K\n");
149 else if (test
== MUSB_TEST_J
)
150 seq_printf(s
, "test J\n");
152 else if (test
== MUSB_TEST_SE0_NAK
)
153 seq_printf(s
, "test SE0 NAK\n");
158 static int musb_test_mode_open(struct inode
*inode
, struct file
*file
)
160 return single_open(file
, musb_test_mode_show
, inode
->i_private
);
163 static ssize_t
musb_test_mode_write(struct file
*file
,
164 const char __user
*ubuf
, size_t count
, loff_t
*ppos
)
166 struct seq_file
*s
= file
->private_data
;
167 struct musb
*musb
= s
->private;
171 pm_runtime_get_sync(musb
->controller
);
172 test
= musb_readb(musb
->mregs
, MUSB_TESTMODE
);
174 dev_err(musb
->controller
, "Error: test mode is already set. "
175 "Please do USB Bus Reset to start a new test.\n");
179 memset(buf
, 0x00, sizeof(buf
));
181 if (copy_from_user(buf
, ubuf
, min_t(size_t, sizeof(buf
) - 1, count
)))
184 if (strstarts(buf
, "force host full-speed"))
185 test
= MUSB_TEST_FORCE_HOST
| MUSB_TEST_FORCE_FS
;
187 else if (strstarts(buf
, "force host high-speed"))
188 test
= MUSB_TEST_FORCE_HOST
| MUSB_TEST_FORCE_HS
;
190 else if (strstarts(buf
, "force host"))
191 test
= MUSB_TEST_FORCE_HOST
;
193 else if (strstarts(buf
, "fifo access"))
194 test
= MUSB_TEST_FIFO_ACCESS
;
196 else if (strstarts(buf
, "force full-speed"))
197 test
= MUSB_TEST_FORCE_FS
;
199 else if (strstarts(buf
, "force high-speed"))
200 test
= MUSB_TEST_FORCE_HS
;
202 else if (strstarts(buf
, "test packet")) {
203 test
= MUSB_TEST_PACKET
;
204 musb_load_testpacket(musb
);
207 else if (strstarts(buf
, "test K"))
210 else if (strstarts(buf
, "test J"))
213 else if (strstarts(buf
, "test SE0 NAK"))
214 test
= MUSB_TEST_SE0_NAK
;
216 musb_writeb(musb
->mregs
, MUSB_TESTMODE
, test
);
219 pm_runtime_mark_last_busy(musb
->controller
);
220 pm_runtime_put_autosuspend(musb
->controller
);
224 static const struct file_operations musb_test_mode_fops
= {
225 .open
= musb_test_mode_open
,
226 .write
= musb_test_mode_write
,
229 .release
= single_release
,
232 static int musb_softconnect_show(struct seq_file
*s
, void *unused
)
234 struct musb
*musb
= s
->private;
238 switch (musb
->xceiv
->otg
->state
) {
239 case OTG_STATE_A_HOST
:
240 case OTG_STATE_A_WAIT_BCON
:
241 pm_runtime_get_sync(musb
->controller
);
243 reg
= musb_readb(musb
->mregs
, MUSB_DEVCTL
);
244 connect
= reg
& MUSB_DEVCTL_SESSION
? 1 : 0;
246 pm_runtime_mark_last_busy(musb
->controller
);
247 pm_runtime_put_autosuspend(musb
->controller
);
253 seq_printf(s
, "%d\n", connect
);
258 static int musb_softconnect_open(struct inode
*inode
, struct file
*file
)
260 return single_open(file
, musb_softconnect_show
, inode
->i_private
);
263 static ssize_t
musb_softconnect_write(struct file
*file
,
264 const char __user
*ubuf
, size_t count
, loff_t
*ppos
)
266 struct seq_file
*s
= file
->private_data
;
267 struct musb
*musb
= s
->private;
271 memset(buf
, 0x00, sizeof(buf
));
273 if (copy_from_user(&buf
, ubuf
, min_t(size_t, sizeof(buf
) - 1, count
)))
276 pm_runtime_get_sync(musb
->controller
);
277 if (!strncmp(buf
, "0", 1)) {
278 switch (musb
->xceiv
->otg
->state
) {
279 case OTG_STATE_A_HOST
:
280 musb_root_disconnect(musb
);
281 reg
= musb_readb(musb
->mregs
, MUSB_DEVCTL
);
282 reg
&= ~MUSB_DEVCTL_SESSION
;
283 musb_writeb(musb
->mregs
, MUSB_DEVCTL
, reg
);
288 } else if (!strncmp(buf
, "1", 1)) {
289 switch (musb
->xceiv
->otg
->state
) {
290 case OTG_STATE_A_WAIT_BCON
:
292 * musb_save_context() called in musb_runtime_suspend()
293 * might cache devctl with SESSION bit cleared during
294 * soft-disconnect, so specifically set SESSION bit
295 * here to preserve it for musb_runtime_resume().
297 musb
->context
.devctl
|= MUSB_DEVCTL_SESSION
;
298 reg
= musb_readb(musb
->mregs
, MUSB_DEVCTL
);
299 reg
|= MUSB_DEVCTL_SESSION
;
300 musb_writeb(musb
->mregs
, MUSB_DEVCTL
, reg
);
307 pm_runtime_mark_last_busy(musb
->controller
);
308 pm_runtime_put_autosuspend(musb
->controller
);
313 * In host mode, connect/disconnect the bus without physically
314 * remove the devices.
316 static const struct file_operations musb_softconnect_fops
= {
317 .open
= musb_softconnect_open
,
318 .write
= musb_softconnect_write
,
321 .release
= single_release
,
324 void musb_init_debugfs(struct musb
*musb
)
328 root
= debugfs_create_dir(dev_name(musb
->controller
), usb_debug_root
);
329 musb
->debugfs_root
= root
;
331 debugfs_create_file("regdump", S_IRUGO
, root
, musb
, &musb_regdump_fops
);
332 debugfs_create_file("testmode", S_IRUGO
| S_IWUSR
, root
, musb
,
333 &musb_test_mode_fops
);
334 debugfs_create_file("softconnect", S_IRUGO
| S_IWUSR
, root
, musb
,
335 &musb_softconnect_fops
);
338 void /* __init_or_exit */ musb_exit_debugfs(struct musb
*musb
)
340 debugfs_remove_recursive(musb
->debugfs_root
);