1 // SPDX-License-Identifier: GPL-2.0+
3 * NOP USB transceiver for all USB transceiver which are either built-in
4 * into USB IP or which are mostly autonomous.
6 * Copyright (C) 2009 Texas Instruments Inc
7 * Author: Ajay Kumar Gupta <ajay.gupta@ti.com>
10 * This provides a "nop" transceiver for PHYs which are
11 * autonomous such as isp1504, isp1707, etc.
14 #include <linux/module.h>
15 #include <linux/platform_device.h>
16 #include <linux/dma-mapping.h>
17 #include <linux/usb/gadget.h>
18 #include <linux/usb/otg.h>
19 #include <linux/usb/usb_phy_generic.h>
20 #include <linux/slab.h>
21 #include <linux/clk.h>
22 #include <linux/regulator/consumer.h>
24 #include <linux/gpio/consumer.h>
25 #include <linux/delay.h>
27 #include "phy-generic.h"
29 #define VBUS_IRQ_FLAGS \
30 (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | \
33 struct platform_device
*usb_phy_generic_register(void)
35 return platform_device_register_simple("usb_phy_generic",
36 PLATFORM_DEVID_AUTO
, NULL
, 0);
38 EXPORT_SYMBOL_GPL(usb_phy_generic_register
);
40 void usb_phy_generic_unregister(struct platform_device
*pdev
)
42 platform_device_unregister(pdev
);
44 EXPORT_SYMBOL_GPL(usb_phy_generic_unregister
);
46 static int nop_set_suspend(struct usb_phy
*x
, int suspend
)
48 struct usb_phy_generic
*nop
= dev_get_drvdata(x
->dev
);
50 if (!IS_ERR(nop
->clk
)) {
52 clk_disable_unprepare(nop
->clk
);
54 clk_prepare_enable(nop
->clk
);
60 static void nop_reset(struct usb_phy_generic
*nop
)
62 if (!nop
->gpiod_reset
)
65 gpiod_set_value_cansleep(nop
->gpiod_reset
, 1);
66 usleep_range(10000, 20000);
67 gpiod_set_value_cansleep(nop
->gpiod_reset
, 0);
70 /* interface to regulator framework */
71 static void nop_set_vbus_draw(struct usb_phy_generic
*nop
, unsigned mA
)
73 struct regulator
*vbus_draw
= nop
->vbus_draw
;
80 enabled
= nop
->vbus_draw_enabled
;
82 regulator_set_current_limit(vbus_draw
, 0, 1000 * mA
);
84 ret
= regulator_enable(vbus_draw
);
87 nop
->vbus_draw_enabled
= 1;
91 ret
= regulator_disable(vbus_draw
);
94 nop
->vbus_draw_enabled
= 0;
101 static irqreturn_t
nop_gpio_vbus_thread(int irq
, void *data
)
103 struct usb_phy_generic
*nop
= data
;
104 struct usb_otg
*otg
= nop
->phy
.otg
;
107 vbus
= gpiod_get_value(nop
->gpiod_vbus
);
108 if ((vbus
^ nop
->vbus
) == 0)
113 status
= USB_EVENT_VBUS
;
114 otg
->state
= OTG_STATE_B_PERIPHERAL
;
115 nop
->phy
.last_event
= status
;
117 /* drawing a "unit load" is *always* OK, except for OTG */
118 nop_set_vbus_draw(nop
, 100);
120 atomic_notifier_call_chain(&nop
->phy
.notifier
, status
,
123 nop_set_vbus_draw(nop
, 0);
125 status
= USB_EVENT_NONE
;
126 otg
->state
= OTG_STATE_B_IDLE
;
127 nop
->phy
.last_event
= status
;
129 atomic_notifier_call_chain(&nop
->phy
.notifier
, status
,
135 int usb_gen_phy_init(struct usb_phy
*phy
)
137 struct usb_phy_generic
*nop
= dev_get_drvdata(phy
->dev
);
140 if (!IS_ERR(nop
->vcc
)) {
141 if (regulator_enable(nop
->vcc
))
142 dev_err(phy
->dev
, "Failed to enable power\n");
145 if (!IS_ERR(nop
->clk
)) {
146 ret
= clk_prepare_enable(nop
->clk
);
155 EXPORT_SYMBOL_GPL(usb_gen_phy_init
);
157 void usb_gen_phy_shutdown(struct usb_phy
*phy
)
159 struct usb_phy_generic
*nop
= dev_get_drvdata(phy
->dev
);
161 gpiod_set_value_cansleep(nop
->gpiod_reset
, 1);
163 if (!IS_ERR(nop
->clk
))
164 clk_disable_unprepare(nop
->clk
);
166 if (!IS_ERR(nop
->vcc
)) {
167 if (regulator_disable(nop
->vcc
))
168 dev_err(phy
->dev
, "Failed to disable power\n");
171 EXPORT_SYMBOL_GPL(usb_gen_phy_shutdown
);
173 static int nop_set_peripheral(struct usb_otg
*otg
, struct usb_gadget
*gadget
)
183 otg
->gadget
= gadget
;
184 if (otg
->state
== OTG_STATE_B_PERIPHERAL
)
185 atomic_notifier_call_chain(&otg
->usb_phy
->notifier
,
186 USB_EVENT_VBUS
, otg
->gadget
);
188 otg
->state
= OTG_STATE_B_IDLE
;
192 static int nop_set_host(struct usb_otg
*otg
, struct usb_bus
*host
)
206 int usb_phy_gen_create_phy(struct device
*dev
, struct usb_phy_generic
*nop
)
208 enum usb_phy_type type
= USB_PHY_TYPE_USB2
;
212 bool needs_vcc
= false, needs_clk
= false;
215 struct device_node
*node
= dev
->of_node
;
217 if (of_property_read_u32(node
, "clock-frequency", &clk_rate
))
220 needs_vcc
= of_property_read_bool(node
, "vcc-supply");
221 needs_clk
= of_property_read_bool(node
, "clocks");
223 nop
->gpiod_reset
= devm_gpiod_get_optional(dev
, "reset",
225 err
= PTR_ERR_OR_ZERO(nop
->gpiod_reset
);
227 nop
->gpiod_vbus
= devm_gpiod_get_optional(dev
,
230 err
= PTR_ERR_OR_ZERO(nop
->gpiod_vbus
);
233 if (err
== -EPROBE_DEFER
)
234 return -EPROBE_DEFER
;
236 dev_err(dev
, "Error requesting RESET or VBUS GPIO\n");
239 if (nop
->gpiod_reset
)
240 gpiod_direction_output(nop
->gpiod_reset
, 1);
242 nop
->phy
.otg
= devm_kzalloc(dev
, sizeof(*nop
->phy
.otg
),
247 nop
->clk
= devm_clk_get(dev
, "main_clk");
248 if (IS_ERR(nop
->clk
)) {
249 dev_dbg(dev
, "Can't get phy clock: %ld\n",
252 return PTR_ERR(nop
->clk
);
255 if (!IS_ERR(nop
->clk
) && clk_rate
) {
256 err
= clk_set_rate(nop
->clk
, clk_rate
);
258 dev_err(dev
, "Error setting clock rate\n");
263 nop
->vcc
= devm_regulator_get(dev
, "vcc");
264 if (IS_ERR(nop
->vcc
)) {
265 dev_dbg(dev
, "Error getting vcc regulator: %ld\n",
268 return -EPROBE_DEFER
;
272 nop
->phy
.dev
= nop
->dev
;
273 nop
->phy
.label
= "nop-xceiv";
274 nop
->phy
.set_suspend
= nop_set_suspend
;
275 nop
->phy
.type
= type
;
277 nop
->phy
.otg
->state
= OTG_STATE_UNDEFINED
;
278 nop
->phy
.otg
->usb_phy
= &nop
->phy
;
279 nop
->phy
.otg
->set_host
= nop_set_host
;
280 nop
->phy
.otg
->set_peripheral
= nop_set_peripheral
;
284 EXPORT_SYMBOL_GPL(usb_phy_gen_create_phy
);
286 static int usb_phy_generic_probe(struct platform_device
*pdev
)
288 struct device
*dev
= &pdev
->dev
;
289 struct usb_phy_generic
*nop
;
292 nop
= devm_kzalloc(dev
, sizeof(*nop
), GFP_KERNEL
);
296 err
= usb_phy_gen_create_phy(dev
, nop
);
299 if (nop
->gpiod_vbus
) {
300 err
= devm_request_threaded_irq(&pdev
->dev
,
301 gpiod_to_irq(nop
->gpiod_vbus
),
302 NULL
, nop_gpio_vbus_thread
,
303 VBUS_IRQ_FLAGS
, "vbus_detect",
306 dev_err(&pdev
->dev
, "can't request irq %i, err: %d\n",
307 gpiod_to_irq(nop
->gpiod_vbus
), err
);
310 nop
->phy
.otg
->state
= gpiod_get_value(nop
->gpiod_vbus
) ?
311 OTG_STATE_B_PERIPHERAL
: OTG_STATE_B_IDLE
;
314 nop
->phy
.init
= usb_gen_phy_init
;
315 nop
->phy
.shutdown
= usb_gen_phy_shutdown
;
317 err
= usb_add_phy_dev(&nop
->phy
);
319 dev_err(&pdev
->dev
, "can't register transceiver, err: %d\n",
324 platform_set_drvdata(pdev
, nop
);
329 static int usb_phy_generic_remove(struct platform_device
*pdev
)
331 struct usb_phy_generic
*nop
= platform_get_drvdata(pdev
);
333 usb_remove_phy(&nop
->phy
);
338 static const struct of_device_id nop_xceiv_dt_ids
[] = {
339 { .compatible
= "usb-nop-xceiv" },
343 MODULE_DEVICE_TABLE(of
, nop_xceiv_dt_ids
);
345 static struct platform_driver usb_phy_generic_driver
= {
346 .probe
= usb_phy_generic_probe
,
347 .remove
= usb_phy_generic_remove
,
349 .name
= "usb_phy_generic",
350 .of_match_table
= nop_xceiv_dt_ids
,
354 static int __init
usb_phy_generic_init(void)
356 return platform_driver_register(&usb_phy_generic_driver
);
358 subsys_initcall(usb_phy_generic_init
);
360 static void __exit
usb_phy_generic_exit(void)
362 platform_driver_unregister(&usb_phy_generic_driver
);
364 module_exit(usb_phy_generic_exit
);
366 MODULE_ALIAS("platform:usb_phy_generic");
367 MODULE_AUTHOR("Texas Instruments Inc");
368 MODULE_DESCRIPTION("NOP USB Transceiver driver");
369 MODULE_LICENSE("GPL");