drivers/usb/storage/usb.h

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Driver for USB Mass Storage compliant devices
   4  * Main Header File
   5  *
   6  * Current development and maintenance by:
   7  *   (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
   8  *
   9  * Initial work by:
  10  *   (c) 1999 Michael Gee (michael@linuxspecific.com)
  11  *
  12  * This driver is based on the 'USB Mass Storage Class' document. This
  13  * describes in detail the protocol used to communicate with such
  14  * devices.  Clearly, the designers had SCSI and ATAPI commands in
  15  * mind when they created this document.  The commands are all very
  16  * similar to commands in the SCSI-II and ATAPI specifications.
  17  *
  18  * It is important to note that in a number of cases this class
  19  * exhibits class-specific exemptions from the USB specification.
  20  * Notably the usage of NAK, STALL and ACK differs from the norm, in
  21  * that they are used to communicate wait, failed and OK on commands.
  22  *
  23  * Also, for certain devices, the interrupt endpoint is used to convey
  24  * status of a command.
  25  */
  26
  27 #ifndef _USB_H_
  28 #define _USB_H_
  29
  30 #include <linux/usb.h>
  31 #include <linux/usb_usual.h>
  32 #include <linux/blkdev.h>
  33 #include <linux/completion.h>
  34 #include <linux/mutex.h>
  35 #include <linux/workqueue.h>
  36 #include <scsi/scsi_host.h>
  37
  38 struct us_data;
  39 struct scsi_cmnd;
  40
  41 /*
  42  * Unusual device list definitions
  43  */
  44
  45 struct us_unusual_dev {
  46         const char* vendorName;
  47         const char* productName;
  48         __u8  useProtocol;
  49         __u8  useTransport;
  50         int (*initFunction)(struct us_data *);
  51 };
  52
  53
  54 /* Dynamic bitflag definitions (us->dflags): used in set_bit() etc. */
  55 #define US_FLIDX_URB_ACTIVE     0       /* current_urb is in use    */
  56 #define US_FLIDX_SG_ACTIVE      1       /* current_sg is in use     */
  57 #define US_FLIDX_ABORTING       2       /* abort is in progress     */
  58 #define US_FLIDX_DISCONNECTING  3       /* disconnect in progress   */
  59 #define US_FLIDX_RESETTING      4       /* device reset in progress */
  60 #define US_FLIDX_TIMED_OUT      5       /* SCSI midlayer timed out  */
  61 #define US_FLIDX_SCAN_PENDING   6       /* scanning not yet done    */
  62 #define US_FLIDX_REDO_READ10    7       /* redo READ(10) command    */
  63 #define US_FLIDX_READ10_WORKED  8       /* previous READ(10) succeeded */
  64
  65 #define USB_STOR_STRING_LEN 32
  66
  67 /*
  68  * We provide a DMA-mapped I/O buffer for use with small USB transfers.
  69  * It turns out that CB[I] needs a 12-byte buffer and Bulk-only needs a
  70  * 31-byte buffer.  But Freecom needs a 64-byte buffer, so that's the
  71  * size we'll allocate.
  72  */
  73
  74 #define US_IOBUF_SIZE           64      /* Size of the DMA-mapped I/O buffer */
  75 #define US_SENSE_SIZE           18      /* Size of the autosense data buffer */
  76
  77 typedef int (*trans_cmnd)(struct scsi_cmnd *, struct us_data*);
  78 typedef int (*trans_reset)(struct us_data*);
  79 typedef void (*proto_cmnd)(struct scsi_cmnd*, struct us_data*);
  80 typedef void (*extra_data_destructor)(void *);  /* extra data destructor */
  81 typedef void (*pm_hook)(struct us_data *, int); /* power management hook */
  82
  83 #define US_SUSPEND      0
  84 #define US_RESUME       1
  85
  86 /* we allocate one of these for every device that we remember */
  87 struct us_data {
  88         /*
  89          * The device we're working with
  90          * It's important to note:
  91          *    (o) you must hold dev_mutex to change pusb_dev
  92          */
  93         struct mutex            dev_mutex;       /* protect pusb_dev */
  94         struct usb_device       *pusb_dev;       /* this usb_device */
  95         struct usb_interface    *pusb_intf;      /* this interface */
  96         struct us_unusual_dev   *unusual_dev;    /* device-filter entry     */
  97         unsigned long           fflags;          /* fixed flags from filter */
  98         unsigned long           dflags;          /* dynamic atomic bitflags */
  99         unsigned int            send_bulk_pipe;  /* cached pipe values */
 100         unsigned int            recv_bulk_pipe;
 101         unsigned int            send_ctrl_pipe;
 102         unsigned int            recv_ctrl_pipe;
 103         unsigned int            recv_intr_pipe;
 104
 105         /* information about the device */
 106         char                    *transport_name;
 107         char                    *protocol_name;
 108         __le32                  bcs_signature;
 109         u8                      subclass;
 110         u8                      protocol;
 111         u8                      max_lun;
 112
 113         u8                      ifnum;           /* interface number   */
 114         u8                      ep_bInterval;    /* interrupt interval */
 115
 116         /* function pointers for this device */
 117         trans_cmnd              transport;       /* transport function     */
 118         trans_reset             transport_reset; /* transport device reset */
 119         proto_cmnd              proto_handler;   /* protocol handler       */
 120
 121         /* SCSI interfaces */
 122         struct scsi_cmnd        *srb;            /* current srb         */
 123         unsigned int            tag;             /* current dCBWTag     */
 124         char                    scsi_name[32];   /* scsi_host name      */
 125
 126         /* control and bulk communications data */
 127         struct urb              *current_urb;    /* USB requests         */
 128         struct usb_ctrlrequest  *cr;             /* control requests     */
 129         struct usb_sg_request   current_sg;      /* scatter-gather req.  */
 130         unsigned char           *iobuf;          /* I/O buffer           */
 131         dma_addr_t              iobuf_dma;       /* buffer DMA addresses */
 132         struct task_struct      *ctl_thread;     /* the control thread   */
 133
 134         /* mutual exclusion and synchronization structures */
 135         struct completion       cmnd_ready;      /* to sleep thread on      */
 136         struct completion       notify;          /* thread begin/end        */
 137         wait_queue_head_t       delay_wait;      /* wait during reset       */
 138         struct delayed_work     scan_dwork;      /* for async scanning      */
 139
 140         /* subdriver information */
 141         void                    *extra;          /* Any extra data          */
 142         extra_data_destructor   extra_destructor;/* extra data destructor   */
 143 #ifdef CONFIG_PM
 144         pm_hook                 suspend_resume_hook;
 145 #endif
 146
 147         /* hacks for READ CAPACITY bug handling */
 148         int                     use_last_sector_hacks;
 149         int                     last_sector_retries;
 150 };
 151
 152 /* Convert between us_data and the corresponding Scsi_Host */
 153 static inline struct Scsi_Host *us_to_host(struct us_data *us) {
 154         return container_of((void *) us, struct Scsi_Host, hostdata);
 155 }
 156 static inline struct us_data *host_to_us(struct Scsi_Host *host) {
 157         return (struct us_data *) host->hostdata;
 158 }
 159
 160 /* Function to fill an inquiry response. See usb.c for details */
 161 extern void fill_inquiry_response(struct us_data *us,
 162         unsigned char *data, unsigned int data_len);
 163
 164 /*
 165  * The scsi_lock() and scsi_unlock() macros protect the sm_state and the
 166  * single queue element srb for write access
 167  */
 168 #define scsi_unlock(host)       spin_unlock_irq(host->host_lock)
 169 #define scsi_lock(host)         spin_lock_irq(host->host_lock)
 170
 171 /* General routines provided by the usb-storage standard core */
 172 #ifdef CONFIG_PM
 173 extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message);
 174 extern int usb_stor_resume(struct usb_interface *iface);
 175 extern int usb_stor_reset_resume(struct usb_interface *iface);
 176 #else
 177 #define usb_stor_suspend        NULL
 178 #define usb_stor_resume         NULL
 179 #define usb_stor_reset_resume   NULL
 180 #endif
 181
 182 extern int usb_stor_pre_reset(struct usb_interface *iface);
 183 extern int usb_stor_post_reset(struct usb_interface *iface);
 184
 185 extern int usb_stor_probe1(struct us_data **pus,
 186                 struct usb_interface *intf,
 187                 const struct usb_device_id *id,
 188                 struct us_unusual_dev *unusual_dev,
 189                 struct scsi_host_template *sht);
 190 extern int usb_stor_probe2(struct us_data *us);
 191 extern void usb_stor_disconnect(struct usb_interface *intf);
 192
 193 extern void usb_stor_adjust_quirks(struct usb_device *dev,
 194                 unsigned long *fflags);
 195
 196 #define module_usb_stor_driver(__driver, __sht, __name) \
 197 static int __init __driver##_init(void) \
 198 { \
 199         usb_stor_host_template_init(&(__sht), __name, THIS_MODULE); \
 200         return usb_register(&(__driver)); \
 201 } \
 202 module_init(__driver##_init); \
 203 static void __exit __driver##_exit(void) \
 204 { \
 205         usb_deregister(&(__driver)); \
 206 } \
 207 module_exit(__driver##_exit)
 208
 209 #endif