tools/testing/selftests/bpf/test_tunnel.sh

   1 #!/bin/bash
   2 # SPDX-License-Identifier: GPL-2.0
   3
   4 # End-to-end eBPF tunnel test suite
   5 #   The script tests BPF network tunnel implementation.
   6 #
   7 # Topology:
   8 # ---------
   9 #     root namespace   |     at_ns0 namespace
  10 #                      |
  11 #      -----------     |     -----------
  12 #      | tnl dev |     |     | tnl dev |  (overlay network)
  13 #      -----------     |     -----------
  14 #      metadata-mode   |     native-mode
  15 #       with bpf       |
  16 #                      |
  17 #      ----------      |     ----------
  18 #      |  veth1  | --------- |  veth0  |  (underlay network)
  19 #      ----------    peer    ----------
  20 #
  21 #
  22 # Device Configuration
  23 # --------------------
  24 # Root namespace with metadata-mode tunnel + BPF
  25 # Device names and addresses:
  26 #       veth1 IP: 172.16.1.200, IPv6: 00::22 (underlay)
  27 #       tunnel dev <type>11, ex: gre11, IPv4: 10.1.1.200 (overlay)
  28 #
  29 # Namespace at_ns0 with native tunnel
  30 # Device names and addresses:
  31 #       veth0 IPv4: 172.16.1.100, IPv6: 00::11 (underlay)
  32 #       tunnel dev <type>00, ex: gre00, IPv4: 10.1.1.100 (overlay)
  33 #
  34 #
  35 # End-to-end ping packet flow
  36 # ---------------------------
  37 # Most of the tests start by namespace creation, device configuration,
  38 # then ping the underlay and overlay network.  When doing 'ping 10.1.1.100'
  39 # from root namespace, the following operations happen:
  40 # 1) Route lookup shows 10.1.1.100/24 belongs to tnl dev, fwd to tnl dev.
  41 # 2) Tnl device's egress BPF program is triggered and set the tunnel metadata,
  42 #    with remote_ip=172.16.1.200 and others.
  43 # 3) Outer tunnel header is prepended and route the packet to veth1's egress
  44 # 4) veth0's ingress queue receive the tunneled packet at namespace at_ns0
  45 # 5) Tunnel protocol handler, ex: vxlan_rcv, decap the packet
  46 # 6) Forward the packet to the overlay tnl dev
  47
  48 PING_ARG="-c 3 -w 10 -q"
  49 ret=0
  50 GREEN='\033[0;92m'
  51 RED='\033[0;31m'
  52 NC='\033[0m' # No Color
  53
  54 config_device()
  55 {
  56         ip netns add at_ns0
  57         ip link add veth0 type veth peer name veth1
  58         ip link set veth0 netns at_ns0
  59         ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
  60         ip netns exec at_ns0 ip link set dev veth0 up
  61         ip link set dev veth1 up mtu 1500
  62         ip addr add dev veth1 172.16.1.200/24
  63 }
  64
  65 add_gre_tunnel()
  66 {
  67         # at_ns0 namespace
  68         ip netns exec at_ns0 \
  69         ip link add dev $DEV_NS type $TYPE seq key 2 \
  70                 local 172.16.1.100 remote 172.16.1.200
  71         ip netns exec at_ns0 ip link set dev $DEV_NS up
  72         ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
  73
  74         # root namespace
  75         ip link add dev $DEV type $TYPE key 2 external
  76         ip link set dev $DEV up
  77         ip addr add dev $DEV 10.1.1.200/24
  78 }
  79
  80 add_ip6gretap_tunnel()
  81 {
  82
  83         # assign ipv6 address
  84         ip netns exec at_ns0 ip addr add ::11/96 dev veth0
  85         ip netns exec at_ns0 ip link set dev veth0 up
  86         ip addr add dev veth1 ::22/96
  87         ip link set dev veth1 up
  88
  89         # at_ns0 namespace
  90         ip netns exec at_ns0 \
  91                 ip link add dev $DEV_NS type $TYPE seq flowlabel 0xbcdef key 2 \
  92                 local ::11 remote ::22
  93
  94         ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
  95         ip netns exec at_ns0 ip addr add dev $DEV_NS fc80::100/96
  96         ip netns exec at_ns0 ip link set dev $DEV_NS up
  97
  98         # root namespace
  99         ip link add dev $DEV type $TYPE external
 100         ip addr add dev $DEV 10.1.1.200/24
 101         ip addr add dev $DEV fc80::200/24
 102         ip link set dev $DEV up
 103 }
 104
 105 add_erspan_tunnel()
 106 {
 107         # at_ns0 namespace
 108         if [ "$1" == "v1" ]; then
 109                 ip netns exec at_ns0 \
 110                 ip link add dev $DEV_NS type $TYPE seq key 2 \
 111                 local 172.16.1.100 remote 172.16.1.200 \
 112                 erspan_ver 1 erspan 123
 113         else
 114                 ip netns exec at_ns0 \
 115                 ip link add dev $DEV_NS type $TYPE seq key 2 \
 116                 local 172.16.1.100 remote 172.16.1.200 \
 117                 erspan_ver 2 erspan_dir egress erspan_hwid 3
 118         fi
 119         ip netns exec at_ns0 ip link set dev $DEV_NS up
 120         ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
 121
 122         # root namespace
 123         ip link add dev $DEV type $TYPE external
 124         ip link set dev $DEV up
 125         ip addr add dev $DEV 10.1.1.200/24
 126 }
 127
 128 add_ip6erspan_tunnel()
 129 {
 130
 131         # assign ipv6 address
 132         ip netns exec at_ns0 ip addr add ::11/96 dev veth0
 133         ip netns exec at_ns0 ip link set dev veth0 up
 134         ip addr add dev veth1 ::22/96
 135         ip link set dev veth1 up
 136
 137         # at_ns0 namespace
 138         if [ "$1" == "v1" ]; then
 139                 ip netns exec at_ns0 \
 140                 ip link add dev $DEV_NS type $TYPE seq key 2 \
 141                 local ::11 remote ::22 \
 142                 erspan_ver 1 erspan 123
 143         else
 144                 ip netns exec at_ns0 \
 145                 ip link add dev $DEV_NS type $TYPE seq key 2 \
 146                 local ::11 remote ::22 \
 147                 erspan_ver 2 erspan_dir egress erspan_hwid 7
 148         fi
 149         ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
 150         ip netns exec at_ns0 ip link set dev $DEV_NS up
 151
 152         # root namespace
 153         ip link add dev $DEV type $TYPE external
 154         ip addr add dev $DEV 10.1.1.200/24
 155         ip link set dev $DEV up
 156 }
 157
 158 add_vxlan_tunnel()
 159 {
 160         # Set static ARP entry here because iptables set-mark works
 161         # on L3 packet, as a result not applying to ARP packets,
 162         # causing errors at get_tunnel_{key/opt}.
 163
 164         # at_ns0 namespace
 165         ip netns exec at_ns0 \
 166                 ip link add dev $DEV_NS type $TYPE \
 167                 id 2 dstport 4789 gbp remote 172.16.1.200
 168         ip netns exec at_ns0 \
 169                 ip link set dev $DEV_NS address 52:54:00:d9:01:00 up
 170         ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
 171         ip netns exec at_ns0 arp -s 10.1.1.200 52:54:00:d9:02:00
 172         ip netns exec at_ns0 iptables -A OUTPUT -j MARK --set-mark 0x800FF
 173
 174         # root namespace
 175         ip link add dev $DEV type $TYPE external gbp dstport 4789
 176         ip link set dev $DEV address 52:54:00:d9:02:00 up
 177         ip addr add dev $DEV 10.1.1.200/24
 178         arp -s 10.1.1.100 52:54:00:d9:01:00
 179 }
 180
 181 add_ip6vxlan_tunnel()
 182 {
 183         #ip netns exec at_ns0 ip -4 addr del 172.16.1.100 dev veth0
 184         ip netns exec at_ns0 ip -6 addr add ::11/96 dev veth0
 185         ip netns exec at_ns0 ip link set dev veth0 up
 186         #ip -4 addr del 172.16.1.200 dev veth1
 187         ip -6 addr add dev veth1 ::22/96
 188         ip link set dev veth1 up
 189
 190         # at_ns0 namespace
 191         ip netns exec at_ns0 \
 192                 ip link add dev $DEV_NS type $TYPE id 22 dstport 4789 \
 193                 local ::11 remote ::22
 194         ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
 195         ip netns exec at_ns0 ip link set dev $DEV_NS up
 196
 197         # root namespace
 198         ip link add dev $DEV type $TYPE external dstport 4789
 199         ip addr add dev $DEV 10.1.1.200/24
 200         ip link set dev $DEV up
 201 }
 202
 203 add_geneve_tunnel()
 204 {
 205         # at_ns0 namespace
 206         ip netns exec at_ns0 \
 207                 ip link add dev $DEV_NS type $TYPE \
 208                 id 2 dstport 6081 remote 172.16.1.200
 209         ip netns exec at_ns0 ip link set dev $DEV_NS up
 210         ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
 211
 212         # root namespace
 213         ip link add dev $DEV type $TYPE dstport 6081 external
 214         ip link set dev $DEV up
 215         ip addr add dev $DEV 10.1.1.200/24
 216 }
 217
 218 add_ip6geneve_tunnel()
 219 {
 220         ip netns exec at_ns0 ip addr add ::11/96 dev veth0
 221         ip netns exec at_ns0 ip link set dev veth0 up
 222         ip addr add dev veth1 ::22/96
 223         ip link set dev veth1 up
 224
 225         # at_ns0 namespace
 226         ip netns exec at_ns0 \
 227                 ip link add dev $DEV_NS type $TYPE id 22 \
 228                 remote ::22     # geneve has no local option
 229         ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
 230         ip netns exec at_ns0 ip link set dev $DEV_NS up
 231
 232         # root namespace
 233         ip link add dev $DEV type $TYPE external
 234         ip addr add dev $DEV 10.1.1.200/24
 235         ip link set dev $DEV up
 236 }
 237
 238 add_ipip_tunnel()
 239 {
 240         # at_ns0 namespace
 241         ip netns exec at_ns0 \
 242                 ip link add dev $DEV_NS type $TYPE \
 243                 local 172.16.1.100 remote 172.16.1.200
 244         ip netns exec at_ns0 ip link set dev $DEV_NS up
 245         ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
 246
 247         # root namespace
 248         ip link add dev $DEV type $TYPE external
 249         ip link set dev $DEV up
 250         ip addr add dev $DEV 10.1.1.200/24
 251 }
 252
 253 add_ipip6tnl_tunnel()
 254 {
 255         ip netns exec at_ns0 ip addr add ::11/96 dev veth0
 256         ip netns exec at_ns0 ip link set dev veth0 up
 257         ip addr add dev veth1 ::22/96
 258         ip link set dev veth1 up
 259
 260         # at_ns0 namespace
 261         ip netns exec at_ns0 \
 262                 ip link add dev $DEV_NS type $TYPE \
 263                 local ::11 remote ::22
 264         ip netns exec at_ns0 ip addr add dev $DEV_NS 10.1.1.100/24
 265         ip netns exec at_ns0 ip link set dev $DEV_NS up
 266
 267         # root namespace
 268         ip link add dev $DEV type $TYPE external
 269         ip addr add dev $DEV 10.1.1.200/24
 270         ip link set dev $DEV up
 271 }
 272
 273 test_gre()
 274 {
 275         TYPE=gretap
 276         DEV_NS=gretap00
 277         DEV=gretap11
 278         ret=0
 279
 280         check $TYPE
 281         config_device
 282         add_gre_tunnel
 283         attach_bpf $DEV gre_set_tunnel gre_get_tunnel
 284         ping $PING_ARG 10.1.1.100
 285         check_err $?
 286         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 287         check_err $?
 288         cleanup
 289
 290         if [ $ret -ne 0 ]; then
 291                 echo -e ${RED}"FAIL: $TYPE"${NC}
 292                 return 1
 293         fi
 294         echo -e ${GREEN}"PASS: $TYPE"${NC}
 295 }
 296
 297 test_ip6gre()
 298 {
 299         TYPE=ip6gre
 300         DEV_NS=ip6gre00
 301         DEV=ip6gre11
 302         ret=0
 303
 304         check $TYPE
 305         config_device
 306         # reuse the ip6gretap function
 307         add_ip6gretap_tunnel
 308         attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel
 309         # underlay
 310         ping6 $PING_ARG ::11
 311         # overlay: ipv4 over ipv6
 312         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 313         ping $PING_ARG 10.1.1.100
 314         check_err $?
 315         # overlay: ipv6 over ipv6
 316         ip netns exec at_ns0 ping6 $PING_ARG fc80::200
 317         check_err $?
 318         cleanup
 319
 320         if [ $ret -ne 0 ]; then
 321                 echo -e ${RED}"FAIL: $TYPE"${NC}
 322                 return 1
 323         fi
 324         echo -e ${GREEN}"PASS: $TYPE"${NC}
 325 }
 326
 327 test_ip6gretap()
 328 {
 329         TYPE=ip6gretap
 330         DEV_NS=ip6gretap00
 331         DEV=ip6gretap11
 332         ret=0
 333
 334         check $TYPE
 335         config_device
 336         add_ip6gretap_tunnel
 337         attach_bpf $DEV ip6gretap_set_tunnel ip6gretap_get_tunnel
 338         # underlay
 339         ping6 $PING_ARG ::11
 340         # overlay: ipv4 over ipv6
 341         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 342         ping $PING_ARG 10.1.1.100
 343         check_err $?
 344         # overlay: ipv6 over ipv6
 345         ip netns exec at_ns0 ping6 $PING_ARG fc80::200
 346         check_err $?
 347         cleanup
 348
 349         if [ $ret -ne 0 ]; then
 350                 echo -e ${RED}"FAIL: $TYPE"${NC}
 351                 return 1
 352         fi
 353         echo -e ${GREEN}"PASS: $TYPE"${NC}
 354 }
 355
 356 test_erspan()
 357 {
 358         TYPE=erspan
 359         DEV_NS=erspan00
 360         DEV=erspan11
 361         ret=0
 362
 363         check $TYPE
 364         config_device
 365         add_erspan_tunnel $1
 366         attach_bpf $DEV erspan_set_tunnel erspan_get_tunnel
 367         ping $PING_ARG 10.1.1.100
 368         check_err $?
 369         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 370         check_err $?
 371         cleanup
 372
 373         if [ $ret -ne 0 ]; then
 374                 echo -e ${RED}"FAIL: $TYPE"${NC}
 375                 return 1
 376         fi
 377         echo -e ${GREEN}"PASS: $TYPE"${NC}
 378 }
 379
 380 test_ip6erspan()
 381 {
 382         TYPE=ip6erspan
 383         DEV_NS=ip6erspan00
 384         DEV=ip6erspan11
 385         ret=0
 386
 387         check $TYPE
 388         config_device
 389         add_ip6erspan_tunnel $1
 390         attach_bpf $DEV ip4ip6erspan_set_tunnel ip4ip6erspan_get_tunnel
 391         ping6 $PING_ARG ::11
 392         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 393         check_err $?
 394         cleanup
 395
 396         if [ $ret -ne 0 ]; then
 397                 echo -e ${RED}"FAIL: $TYPE"${NC}
 398                 return 1
 399         fi
 400         echo -e ${GREEN}"PASS: $TYPE"${NC}
 401 }
 402
 403 test_vxlan()
 404 {
 405         TYPE=vxlan
 406         DEV_NS=vxlan00
 407         DEV=vxlan11
 408         ret=0
 409
 410         check $TYPE
 411         config_device
 412         add_vxlan_tunnel
 413         attach_bpf $DEV vxlan_set_tunnel vxlan_get_tunnel
 414         ping $PING_ARG 10.1.1.100
 415         check_err $?
 416         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 417         check_err $?
 418         cleanup
 419
 420         if [ $ret -ne 0 ]; then
 421                 echo -e ${RED}"FAIL: $TYPE"${NC}
 422                 return 1
 423         fi
 424         echo -e ${GREEN}"PASS: $TYPE"${NC}
 425 }
 426
 427 test_ip6vxlan()
 428 {
 429         TYPE=vxlan
 430         DEV_NS=ip6vxlan00
 431         DEV=ip6vxlan11
 432         ret=0
 433
 434         check $TYPE
 435         config_device
 436         add_ip6vxlan_tunnel
 437         ip link set dev veth1 mtu 1500
 438         attach_bpf $DEV ip6vxlan_set_tunnel ip6vxlan_get_tunnel
 439         # underlay
 440         ping6 $PING_ARG ::11
 441         # ip4 over ip6
 442         ping $PING_ARG 10.1.1.100
 443         check_err $?
 444         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 445         check_err $?
 446         cleanup
 447
 448         if [ $ret -ne 0 ]; then
 449                 echo -e ${RED}"FAIL: ip6$TYPE"${NC}
 450                 return 1
 451         fi
 452         echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
 453 }
 454
 455 test_geneve()
 456 {
 457         TYPE=geneve
 458         DEV_NS=geneve00
 459         DEV=geneve11
 460         ret=0
 461
 462         check $TYPE
 463         config_device
 464         add_geneve_tunnel
 465         attach_bpf $DEV geneve_set_tunnel geneve_get_tunnel
 466         ping $PING_ARG 10.1.1.100
 467         check_err $?
 468         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 469         check_err $?
 470         cleanup
 471
 472         if [ $ret -ne 0 ]; then
 473                 echo -e ${RED}"FAIL: $TYPE"${NC}
 474                 return 1
 475         fi
 476         echo -e ${GREEN}"PASS: $TYPE"${NC}
 477 }
 478
 479 test_ip6geneve()
 480 {
 481         TYPE=geneve
 482         DEV_NS=ip6geneve00
 483         DEV=ip6geneve11
 484         ret=0
 485
 486         check $TYPE
 487         config_device
 488         add_ip6geneve_tunnel
 489         attach_bpf $DEV ip6geneve_set_tunnel ip6geneve_get_tunnel
 490         ping $PING_ARG 10.1.1.100
 491         check_err $?
 492         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 493         check_err $?
 494         cleanup
 495
 496         if [ $ret -ne 0 ]; then
 497                 echo -e ${RED}"FAIL: ip6$TYPE"${NC}
 498                 return 1
 499         fi
 500         echo -e ${GREEN}"PASS: ip6$TYPE"${NC}
 501 }
 502
 503 test_ipip()
 504 {
 505         TYPE=ipip
 506         DEV_NS=ipip00
 507         DEV=ipip11
 508         ret=0
 509
 510         check $TYPE
 511         config_device
 512         add_ipip_tunnel
 513         ip link set dev veth1 mtu 1500
 514         attach_bpf $DEV ipip_set_tunnel ipip_get_tunnel
 515         ping $PING_ARG 10.1.1.100
 516         check_err $?
 517         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 518         check_err $?
 519         cleanup
 520
 521         if [ $ret -ne 0 ]; then
 522                 echo -e ${RED}"FAIL: $TYPE"${NC}
 523                 return 1
 524         fi
 525         echo -e ${GREEN}"PASS: $TYPE"${NC}
 526 }
 527
 528 test_ipip6()
 529 {
 530         TYPE=ip6tnl
 531         DEV_NS=ipip6tnl00
 532         DEV=ipip6tnl11
 533         ret=0
 534
 535         check $TYPE
 536         config_device
 537         add_ipip6tnl_tunnel
 538         ip link set dev veth1 mtu 1500
 539         attach_bpf $DEV ipip6_set_tunnel ipip6_get_tunnel
 540         # underlay
 541         ping6 $PING_ARG ::11
 542         # ip4 over ip6
 543         ping $PING_ARG 10.1.1.100
 544         check_err $?
 545         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 546         check_err $?
 547         cleanup
 548
 549         if [ $ret -ne 0 ]; then
 550                 echo -e ${RED}"FAIL: $TYPE"${NC}
 551                 return 1
 552         fi
 553         echo -e ${GREEN}"PASS: $TYPE"${NC}
 554 }
 555
 556 setup_xfrm_tunnel()
 557 {
 558         auth=0x$(printf '1%.0s' {1..40})
 559         enc=0x$(printf '2%.0s' {1..32})
 560         spi_in_to_out=0x1
 561         spi_out_to_in=0x2
 562         # at_ns0 namespace
 563         # at_ns0 -> root
 564         ip netns exec at_ns0 \
 565                 ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
 566                         spi $spi_in_to_out reqid 1 mode tunnel \
 567                         auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
 568         ip netns exec at_ns0 \
 569                 ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir out \
 570                 tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
 571                 mode tunnel
 572         # root -> at_ns0
 573         ip netns exec at_ns0 \
 574                 ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
 575                         spi $spi_out_to_in reqid 2 mode tunnel \
 576                         auth-trunc 'hmac(sha1)' $auth 96 enc 'cbc(aes)' $enc
 577         ip netns exec at_ns0 \
 578                 ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir in \
 579                 tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
 580                 mode tunnel
 581         # address & route
 582         ip netns exec at_ns0 \
 583                 ip addr add dev veth0 10.1.1.100/32
 584         ip netns exec at_ns0 \
 585                 ip route add 10.1.1.200 dev veth0 via 172.16.1.200 \
 586                         src 10.1.1.100
 587
 588         # root namespace
 589         # at_ns0 -> root
 590         ip xfrm state add src 172.16.1.100 dst 172.16.1.200 proto esp \
 591                 spi $spi_in_to_out reqid 1 mode tunnel \
 592                 auth-trunc 'hmac(sha1)' $auth 96  enc 'cbc(aes)' $enc
 593         ip xfrm policy add src 10.1.1.100/32 dst 10.1.1.200/32 dir in \
 594                 tmpl src 172.16.1.100 dst 172.16.1.200 proto esp reqid 1 \
 595                 mode tunnel
 596         # root -> at_ns0
 597         ip xfrm state add src 172.16.1.200 dst 172.16.1.100 proto esp \
 598                 spi $spi_out_to_in reqid 2 mode tunnel \
 599                 auth-trunc 'hmac(sha1)' $auth 96  enc 'cbc(aes)' $enc
 600         ip xfrm policy add src 10.1.1.200/32 dst 10.1.1.100/32 dir out \
 601                 tmpl src 172.16.1.200 dst 172.16.1.100 proto esp reqid 2 \
 602                 mode tunnel
 603         # address & route
 604         ip addr add dev veth1 10.1.1.200/32
 605         ip route add 10.1.1.100 dev veth1 via 172.16.1.100 src 10.1.1.200
 606 }
 607
 608 test_xfrm_tunnel()
 609 {
 610         config_device
 611         > /sys/kernel/debug/tracing/trace
 612         setup_xfrm_tunnel
 613         tc qdisc add dev veth1 clsact
 614         tc filter add dev veth1 proto ip ingress bpf da obj test_tunnel_kern.o \
 615                 sec xfrm_get_state
 616         ip netns exec at_ns0 ping $PING_ARG 10.1.1.200
 617         sleep 1
 618         grep "reqid 1" /sys/kernel/debug/tracing/trace
 619         check_err $?
 620         grep "spi 0x1" /sys/kernel/debug/tracing/trace
 621         check_err $?
 622         grep "remote ip 0xac100164" /sys/kernel/debug/tracing/trace
 623         check_err $?
 624         cleanup
 625
 626         if [ $ret -ne 0 ]; then
 627                 echo -e ${RED}"FAIL: xfrm tunnel"${NC}
 628                 return 1
 629         fi
 630         echo -e ${GREEN}"PASS: xfrm tunnel"${NC}
 631 }
 632
 633 attach_bpf()
 634 {
 635         DEV=$1
 636         SET=$2
 637         GET=$3
 638         tc qdisc add dev $DEV clsact
 639         tc filter add dev $DEV egress bpf da obj test_tunnel_kern.o sec $SET
 640         tc filter add dev $DEV ingress bpf da obj test_tunnel_kern.o sec $GET
 641 }
 642
 643 cleanup()
 644 {
 645         ip netns delete at_ns0 2> /dev/null
 646         ip link del veth1 2> /dev/null
 647         ip link del ipip11 2> /dev/null
 648         ip link del ipip6tnl11 2> /dev/null
 649         ip link del gretap11 2> /dev/null
 650         ip link del ip6gre11 2> /dev/null
 651         ip link del ip6gretap11 2> /dev/null
 652         ip link del vxlan11 2> /dev/null
 653         ip link del ip6vxlan11 2> /dev/null
 654         ip link del geneve11 2> /dev/null
 655         ip link del ip6geneve11 2> /dev/null
 656         ip link del erspan11 2> /dev/null
 657         ip link del ip6erspan11 2> /dev/null
 658         ip xfrm policy delete dir out src 10.1.1.200/32 dst 10.1.1.100/32 2> /dev/null
 659         ip xfrm policy delete dir in src 10.1.1.100/32 dst 10.1.1.200/32 2> /dev/null
 660         ip xfrm state delete src 172.16.1.100 dst 172.16.1.200 proto esp spi 0x1 2> /dev/null
 661         ip xfrm state delete src 172.16.1.200 dst 172.16.1.100 proto esp spi 0x2 2> /dev/null
 662 }
 663
 664 cleanup_exit()
 665 {
 666         echo "CATCH SIGKILL or SIGINT, cleanup and exit"
 667         cleanup
 668         exit 0
 669 }
 670
 671 check()
 672 {
 673         ip link help 2>&1 | grep -q "\s$1\s"
 674         if [ $? -ne 0 ];then
 675                 echo "SKIP $1: iproute2 not support"
 676         cleanup
 677         return 1
 678         fi
 679 }
 680
 681 enable_debug()
 682 {
 683         echo 'file ip_gre.c +p' > /sys/kernel/debug/dynamic_debug/control
 684         echo 'file ip6_gre.c +p' > /sys/kernel/debug/dynamic_debug/control
 685         echo 'file vxlan.c +p' > /sys/kernel/debug/dynamic_debug/control
 686         echo 'file geneve.c +p' > /sys/kernel/debug/dynamic_debug/control
 687         echo 'file ipip.c +p' > /sys/kernel/debug/dynamic_debug/control
 688 }
 689
 690 check_err()
 691 {
 692         if [ $ret -eq 0 ]; then
 693                 ret=$1
 694         fi
 695 }
 696
 697 bpf_tunnel_test()
 698 {
 699         local errors=0
 700
 701         echo "Testing GRE tunnel..."
 702         test_gre
 703         errors=$(( $errors + $? ))
 704
 705         echo "Testing IP6GRE tunnel..."
 706         test_ip6gre
 707         errors=$(( $errors + $? ))
 708
 709         echo "Testing IP6GRETAP tunnel..."
 710         test_ip6gretap
 711         errors=$(( $errors + $? ))
 712
 713         echo "Testing ERSPAN tunnel..."
 714         test_erspan v2
 715         errors=$(( $errors + $? ))
 716
 717         echo "Testing IP6ERSPAN tunnel..."
 718         test_ip6erspan v2
 719         errors=$(( $errors + $? ))
 720
 721         echo "Testing VXLAN tunnel..."
 722         test_vxlan
 723         errors=$(( $errors + $? ))
 724
 725         echo "Testing IP6VXLAN tunnel..."
 726         test_ip6vxlan
 727         errors=$(( $errors + $? ))
 728
 729         echo "Testing GENEVE tunnel..."
 730         test_geneve
 731         errors=$(( $errors + $? ))
 732
 733         echo "Testing IP6GENEVE tunnel..."
 734         test_ip6geneve
 735         errors=$(( $errors + $? ))
 736
 737         echo "Testing IPIP tunnel..."
 738         test_ipip
 739         errors=$(( $errors + $? ))
 740
 741         echo "Testing IPIP6 tunnel..."
 742         test_ipip6
 743         errors=$(( $errors + $? ))
 744
 745         echo "Testing IPSec tunnel..."
 746         test_xfrm_tunnel
 747         errors=$(( $errors + $? ))
 748
 749         return $errors
 750 }
 751
 752 trap cleanup 0 3 6
 753 trap cleanup_exit 2 9
 754
 755 cleanup
 756 bpf_tunnel_test
 757
 758 if [ $? -ne 0 ]; then
 759         echo -e "$(basename $0): ${RED}FAIL${NC}"
 760         exit 1
 761 fi
 762 echo -e "$(basename $0): ${GREEN}PASS${NC}"
 763 exit 0