2 * This file is provided under a dual BSD/GPLv2 license. When using or
3 * redistributing this file, you may do so under either license.
7 * Copyright(c) 2015 Intel Corporation. All rights reserved.
8 * Copyright(c) 2017 T-Platforms. All Rights Reserved.
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of version 2 of the GNU General Public License as
12 * published by the Free Software Foundation.
16 * Copyright(c) 2015 Intel Corporation. All rights reserved.
17 * Copyright(c) 2017 T-Platforms. All Rights Reserved.
19 * Redistribution and use in source and binary forms, with or without
20 * modification, are permitted provided that the following conditions
23 * * Redistributions of source code must retain the above copyright
24 * notice, this list of conditions and the following disclaimer.
25 * * Redistributions in binary form must reproduce the above copy
26 * notice, this list of conditions and the following disclaimer in
27 * the documentation and/or other materials provided with the
29 * * Neither the name of Intel Corporation nor the names of its
30 * contributors may be used to endorse or promote products derived
31 * from this software without specific prior written permission.
33 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
34 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
35 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
36 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
37 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
38 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
39 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
40 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
41 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
42 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
43 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
45 * PCIe NTB Perf Linux driver
49 * How to use this tool, by example.
51 * Assuming $DBG_DIR is something like:
52 * '/sys/kernel/debug/ntb_perf/0000:00:03.0'
53 * Suppose aside from local device there is at least one remote device
54 * connected to NTB with index 0.
55 *-----------------------------------------------------------------------------
56 * Eg: install driver with specified chunk/total orders and dma-enabled flag
58 * root@self# insmod ntb_perf.ko chunk_order=19 total_order=28 use_dma
59 *-----------------------------------------------------------------------------
60 * Eg: check NTB ports (index) and MW mapping information
62 * root@self# cat $DBG_DIR/info
63 *-----------------------------------------------------------------------------
64 * Eg: start performance test with peer (index 0) and get the test metrics
66 * root@self# echo 0 > $DBG_DIR/run
67 * root@self# cat $DBG_DIR/run
70 #include <linux/init.h>
71 #include <linux/kernel.h>
72 #include <linux/module.h>
73 #include <linux/sched.h>
74 #include <linux/wait.h>
75 #include <linux/dma-mapping.h>
76 #include <linux/dmaengine.h>
77 #include <linux/pci.h>
78 #include <linux/ktime.h>
79 #include <linux/slab.h>
80 #include <linux/delay.h>
81 #include <linux/sizes.h>
82 #include <linux/workqueue.h>
83 #include <linux/debugfs.h>
84 #include <linux/random.h>
85 #include <linux/ntb.h>
87 #define DRIVER_NAME "ntb_perf"
88 #define DRIVER_VERSION "2.0"
90 MODULE_LICENSE("Dual BSD/GPL");
91 MODULE_VERSION(DRIVER_VERSION
);
92 MODULE_AUTHOR("Dave Jiang <dave.jiang@intel.com>");
93 MODULE_DESCRIPTION("PCIe NTB Performance Measurement Tool");
95 #define MAX_THREADS_CNT 32
96 #define DEF_THREADS_CNT 1
97 #define MAX_CHUNK_SIZE SZ_1M
98 #define MAX_CHUNK_ORDER 20 /* no larger than 1M */
100 #define DMA_TRIES 100
101 #define DMA_MDELAY 10
103 #define MSG_TRIES 500
104 #define MSG_UDELAY_LOW 1000
105 #define MSG_UDELAY_HIGH 2000
107 #define PERF_BUF_LEN 1024
109 static unsigned long max_mw_size
;
110 module_param(max_mw_size
, ulong
, 0644);
111 MODULE_PARM_DESC(max_mw_size
, "Upper limit of memory window size");
113 static unsigned char chunk_order
= 19; /* 512K */
114 module_param(chunk_order
, byte
, 0644);
115 MODULE_PARM_DESC(chunk_order
, "Data chunk order [2^n] to transfer");
117 static unsigned char total_order
= 30; /* 1G */
118 module_param(total_order
, byte
, 0644);
119 MODULE_PARM_DESC(total_order
, "Total data order [2^n] to transfer");
121 static bool use_dma
; /* default to 0 */
122 module_param(use_dma
, bool, 0644);
123 MODULE_PARM_DESC(use_dma
, "Use DMA engine to measure performance");
125 /*==============================================================================
126 * Perf driver data definition
127 *==============================================================================
131 PERF_CMD_INVAL
= -1,/* invalid spad command */
132 PERF_CMD_SSIZE
= 0, /* send out buffer size */
133 PERF_CMD_RSIZE
= 1, /* recv in buffer size */
134 PERF_CMD_SXLAT
= 2, /* send in buffer xlat */
135 PERF_CMD_RXLAT
= 3, /* recv out buffer xlat */
136 PERF_CMD_CLEAR
= 4, /* clear allocated memory */
137 PERF_STS_DONE
= 5, /* init is done */
138 PERF_STS_LNKUP
= 6, /* link up state flag */
144 struct perf_ctx
*perf
;
148 /* Outbound MW params */
150 resource_size_t outbuf_size
;
151 void __iomem
*outbuf
;
153 /* Inbound MW params */
154 dma_addr_t inbuf_xlat
;
155 resource_size_t inbuf_size
;
158 /* NTB connection setup service */
159 struct work_struct service
;
162 #define to_peer_service(__work) \
163 container_of(__work, struct perf_peer, service)
166 struct perf_ctx
*perf
;
169 /* DMA-based test sync parameters */
171 wait_queue_head_t dma_wait
;
172 struct dma_chan
*dma_chan
;
174 /* Data source and measured statistics */
179 struct work_struct work
;
181 #define to_thread_work(__work) \
182 container_of(__work, struct perf_thread, work)
187 /* Global device index and peers descriptors */
190 struct perf_peer
*peers
;
192 /* Performance measuring work-threads interface */
193 unsigned long busy_flag
;
194 wait_queue_head_t twait
;
197 struct perf_peer
*test_peer
;
198 struct perf_thread threads
[MAX_THREADS_CNT
];
200 /* Scratchpad/Message IO operations */
201 int (*cmd_send
)(struct perf_peer
*peer
, enum perf_cmd cmd
, u64 data
);
202 int (*cmd_recv
)(struct perf_ctx
*perf
, int *pidx
, enum perf_cmd
*cmd
,
205 struct dentry
*dbgfs_dir
;
209 * Scratchpads-base commands interface
211 #define PERF_SPAD_CNT(_pcnt) \
213 #define PERF_SPAD_CMD(_gidx) \
215 #define PERF_SPAD_LDATA(_gidx) \
217 #define PERF_SPAD_HDATA(_gidx) \
219 #define PERF_SPAD_NOTIFY(_gidx) \
223 * Messages-base commands interface
225 #define PERF_MSG_CNT 3
226 #define PERF_MSG_CMD 0
227 #define PERF_MSG_LDATA 1
228 #define PERF_MSG_HDATA 2
230 /*==============================================================================
231 * Static data declarations
232 *==============================================================================
235 static struct dentry
*perf_dbgfs_topdir
;
237 static struct workqueue_struct
*perf_wq __read_mostly
;
239 /*==============================================================================
240 * NTB cross-link commands execution service
241 *==============================================================================
244 static void perf_terminate_test(struct perf_ctx
*perf
);
246 static inline bool perf_link_is_up(struct perf_peer
*peer
)
250 link
= ntb_link_is_up(peer
->perf
->ntb
, NULL
, NULL
);
251 return !!(link
& BIT_ULL_MASK(peer
->pidx
));
254 static int perf_spad_cmd_send(struct perf_peer
*peer
, enum perf_cmd cmd
,
257 struct perf_ctx
*perf
= peer
->perf
;
261 dev_dbg(&perf
->ntb
->dev
, "CMD send: %d 0x%llx\n", cmd
, data
);
264 * Perform predefined number of attempts before give up.
265 * We are sending the data to the port specific scratchpad, so
266 * to prevent a multi-port access race-condition. Additionally
267 * there is no need in local locking since only thread-safe
268 * service work is using this method.
270 for (try = 0; try < MSG_TRIES
; try++) {
271 if (!perf_link_is_up(peer
))
274 sts
= ntb_peer_spad_read(perf
->ntb
, peer
->pidx
,
275 PERF_SPAD_CMD(perf
->gidx
));
276 if (sts
!= PERF_CMD_INVAL
) {
277 usleep_range(MSG_UDELAY_LOW
, MSG_UDELAY_HIGH
);
281 ntb_peer_spad_write(perf
->ntb
, peer
->pidx
,
282 PERF_SPAD_LDATA(perf
->gidx
),
283 lower_32_bits(data
));
284 ntb_peer_spad_write(perf
->ntb
, peer
->pidx
,
285 PERF_SPAD_HDATA(perf
->gidx
),
286 upper_32_bits(data
));
288 ntb_peer_spad_write(perf
->ntb
, peer
->pidx
,
289 PERF_SPAD_CMD(perf
->gidx
),
292 ntb_peer_db_set(perf
->ntb
, PERF_SPAD_NOTIFY(peer
->gidx
));
294 dev_dbg(&perf
->ntb
->dev
, "DB ring peer %#llx\n",
295 PERF_SPAD_NOTIFY(peer
->gidx
));
300 return try < MSG_TRIES
? 0 : -EAGAIN
;
303 static int perf_spad_cmd_recv(struct perf_ctx
*perf
, int *pidx
,
304 enum perf_cmd
*cmd
, u64
*data
)
306 struct perf_peer
*peer
;
309 ntb_db_clear(perf
->ntb
, PERF_SPAD_NOTIFY(perf
->gidx
));
312 * We start scanning all over, since cleared DB may have been set
313 * by any peer. Yes, it makes peer with smaller index being
314 * serviced with greater priority, but it's convenient for spad
315 * and message code unification and simplicity.
317 for (*pidx
= 0; *pidx
< perf
->pcnt
; (*pidx
)++) {
318 peer
= &perf
->peers
[*pidx
];
320 if (!perf_link_is_up(peer
))
323 val
= ntb_spad_read(perf
->ntb
, PERF_SPAD_CMD(peer
->gidx
));
324 if (val
== PERF_CMD_INVAL
)
329 val
= ntb_spad_read(perf
->ntb
, PERF_SPAD_LDATA(peer
->gidx
));
332 val
= ntb_spad_read(perf
->ntb
, PERF_SPAD_HDATA(peer
->gidx
));
333 *data
|= (u64
)val
<< 32;
335 /* Next command can be retrieved from now */
336 ntb_spad_write(perf
->ntb
, PERF_SPAD_CMD(peer
->gidx
),
339 dev_dbg(&perf
->ntb
->dev
, "CMD recv: %d 0x%llx\n", *cmd
, *data
);
347 static int perf_msg_cmd_send(struct perf_peer
*peer
, enum perf_cmd cmd
,
350 struct perf_ctx
*perf
= peer
->perf
;
354 dev_dbg(&perf
->ntb
->dev
, "CMD send: %d 0x%llx\n", cmd
, data
);
357 * Perform predefined number of attempts before give up. Message
358 * registers are free of race-condition problem when accessed
359 * from different ports, so we don't need splitting registers
360 * by global device index. We also won't have local locking,
361 * since the method is used from service work only.
363 outbits
= ntb_msg_outbits(perf
->ntb
);
364 for (try = 0; try < MSG_TRIES
; try++) {
365 if (!perf_link_is_up(peer
))
368 ret
= ntb_msg_clear_sts(perf
->ntb
, outbits
);
372 ntb_peer_msg_write(perf
->ntb
, peer
->pidx
, PERF_MSG_LDATA
,
373 lower_32_bits(data
));
375 if (ntb_msg_read_sts(perf
->ntb
) & outbits
) {
376 usleep_range(MSG_UDELAY_LOW
, MSG_UDELAY_HIGH
);
380 ntb_peer_msg_write(perf
->ntb
, peer
->pidx
, PERF_MSG_HDATA
,
381 upper_32_bits(data
));
384 /* This call shall trigger peer message event */
385 ntb_peer_msg_write(perf
->ntb
, peer
->pidx
, PERF_MSG_CMD
, cmd
);
390 return try < MSG_TRIES
? 0 : -EAGAIN
;
393 static int perf_msg_cmd_recv(struct perf_ctx
*perf
, int *pidx
,
394 enum perf_cmd
*cmd
, u64
*data
)
399 inbits
= ntb_msg_inbits(perf
->ntb
);
401 if (hweight64(ntb_msg_read_sts(perf
->ntb
) & inbits
) < 3)
404 val
= ntb_msg_read(perf
->ntb
, pidx
, PERF_MSG_CMD
);
407 val
= ntb_msg_read(perf
->ntb
, pidx
, PERF_MSG_LDATA
);
410 val
= ntb_msg_read(perf
->ntb
, pidx
, PERF_MSG_HDATA
);
411 *data
|= (u64
)val
<< 32;
413 /* Next command can be retrieved from now */
414 ntb_msg_clear_sts(perf
->ntb
, inbits
);
416 dev_dbg(&perf
->ntb
->dev
, "CMD recv: %d 0x%llx\n", *cmd
, *data
);
421 static int perf_cmd_send(struct perf_peer
*peer
, enum perf_cmd cmd
, u64 data
)
423 struct perf_ctx
*perf
= peer
->perf
;
425 if (cmd
== PERF_CMD_SSIZE
|| cmd
== PERF_CMD_SXLAT
)
426 return perf
->cmd_send(peer
, cmd
, data
);
428 dev_err(&perf
->ntb
->dev
, "Send invalid command\n");
432 static int perf_cmd_exec(struct perf_peer
*peer
, enum perf_cmd cmd
)
442 dev_err(&peer
->perf
->ntb
->dev
, "Exec invalid command\n");
446 /* No need of memory barrier, since bit ops have invernal lock */
447 set_bit(cmd
, &peer
->sts
);
449 dev_dbg(&peer
->perf
->ntb
->dev
, "CMD exec: %d\n", cmd
);
451 (void)queue_work(system_highpri_wq
, &peer
->service
);
456 static int perf_cmd_recv(struct perf_ctx
*perf
)
458 struct perf_peer
*peer
;
462 while (!(ret
= perf
->cmd_recv(perf
, &pidx
, &cmd
, &data
))) {
463 peer
= &perf
->peers
[pidx
];
467 peer
->inbuf_size
= data
;
468 return perf_cmd_exec(peer
, PERF_CMD_RSIZE
);
470 peer
->outbuf_xlat
= data
;
471 return perf_cmd_exec(peer
, PERF_CMD_RXLAT
);
473 dev_err(&perf
->ntb
->dev
, "Recv invalid command\n");
478 /* Return 0 if no data left to process, otherwise an error */
479 return ret
== -ENODATA
? 0 : ret
;
482 static void perf_link_event(void *ctx
)
484 struct perf_ctx
*perf
= ctx
;
485 struct perf_peer
*peer
;
489 for (pidx
= 0; pidx
< perf
->pcnt
; pidx
++) {
490 peer
= &perf
->peers
[pidx
];
492 lnk_up
= perf_link_is_up(peer
);
495 !test_and_set_bit(PERF_STS_LNKUP
, &peer
->sts
)) {
496 perf_cmd_exec(peer
, PERF_CMD_SSIZE
);
497 } else if (!lnk_up
&&
498 test_and_clear_bit(PERF_STS_LNKUP
, &peer
->sts
)) {
499 perf_cmd_exec(peer
, PERF_CMD_CLEAR
);
504 static void perf_db_event(void *ctx
, int vec
)
506 struct perf_ctx
*perf
= ctx
;
508 dev_dbg(&perf
->ntb
->dev
, "DB vec %d mask %#llx bits %#llx\n", vec
,
509 ntb_db_vector_mask(perf
->ntb
, vec
), ntb_db_read(perf
->ntb
));
511 /* Just receive all available commands */
512 (void)perf_cmd_recv(perf
);
515 static void perf_msg_event(void *ctx
)
517 struct perf_ctx
*perf
= ctx
;
519 dev_dbg(&perf
->ntb
->dev
, "Msg status bits %#llx\n",
520 ntb_msg_read_sts(perf
->ntb
));
522 /* Messages are only sent one-by-one */
523 (void)perf_cmd_recv(perf
);
526 static const struct ntb_ctx_ops perf_ops
= {
527 .link_event
= perf_link_event
,
528 .db_event
= perf_db_event
,
529 .msg_event
= perf_msg_event
532 static void perf_free_outbuf(struct perf_peer
*peer
)
534 (void)ntb_peer_mw_clear_trans(peer
->perf
->ntb
, peer
->pidx
, peer
->gidx
);
537 static int perf_setup_outbuf(struct perf_peer
*peer
)
539 struct perf_ctx
*perf
= peer
->perf
;
542 /* Outbuf size can be unaligned due to custom max_mw_size */
543 ret
= ntb_peer_mw_set_trans(perf
->ntb
, peer
->pidx
, peer
->gidx
,
544 peer
->outbuf_xlat
, peer
->outbuf_size
);
546 dev_err(&perf
->ntb
->dev
, "Failed to set outbuf translation\n");
550 /* Initialization is finally done */
551 set_bit(PERF_STS_DONE
, &peer
->sts
);
556 static void perf_free_inbuf(struct perf_peer
*peer
)
561 (void)ntb_mw_clear_trans(peer
->perf
->ntb
, peer
->pidx
, peer
->gidx
);
562 dma_free_coherent(&peer
->perf
->ntb
->dev
, peer
->inbuf_size
,
563 peer
->inbuf
, peer
->inbuf_xlat
);
567 static int perf_setup_inbuf(struct perf_peer
*peer
)
569 resource_size_t xlat_align
, size_align
, size_max
;
570 struct perf_ctx
*perf
= peer
->perf
;
573 /* Get inbound MW parameters */
574 ret
= ntb_mw_get_align(perf
->ntb
, peer
->pidx
, perf
->gidx
,
575 &xlat_align
, &size_align
, &size_max
);
577 dev_err(&perf
->ntb
->dev
, "Couldn't get inbuf restrictions\n");
581 if (peer
->inbuf_size
> size_max
) {
582 dev_err(&perf
->ntb
->dev
, "Too big inbuf size %pa > %pa\n",
583 &peer
->inbuf_size
, &size_max
);
587 peer
->inbuf_size
= round_up(peer
->inbuf_size
, size_align
);
589 perf_free_inbuf(peer
);
591 peer
->inbuf
= dma_alloc_coherent(&perf
->ntb
->dev
, peer
->inbuf_size
,
592 &peer
->inbuf_xlat
, GFP_KERNEL
);
594 dev_err(&perf
->ntb
->dev
, "Failed to alloc inbuf of %pa\n",
598 if (!IS_ALIGNED(peer
->inbuf_xlat
, xlat_align
)) {
599 dev_err(&perf
->ntb
->dev
, "Unaligned inbuf allocated\n");
603 ret
= ntb_mw_set_trans(perf
->ntb
, peer
->pidx
, peer
->gidx
,
604 peer
->inbuf_xlat
, peer
->inbuf_size
);
606 dev_err(&perf
->ntb
->dev
, "Failed to set inbuf translation\n");
611 * We submit inbuf xlat transmission cmd for execution here to follow
612 * the code architecture, even though this method is called from service
613 * work itself so the command will be executed right after it returns.
615 (void)perf_cmd_exec(peer
, PERF_CMD_SXLAT
);
620 perf_free_inbuf(peer
);
625 static void perf_service_work(struct work_struct
*work
)
627 struct perf_peer
*peer
= to_peer_service(work
);
629 if (test_and_clear_bit(PERF_CMD_SSIZE
, &peer
->sts
))
630 perf_cmd_send(peer
, PERF_CMD_SSIZE
, peer
->outbuf_size
);
632 if (test_and_clear_bit(PERF_CMD_RSIZE
, &peer
->sts
))
633 perf_setup_inbuf(peer
);
635 if (test_and_clear_bit(PERF_CMD_SXLAT
, &peer
->sts
))
636 perf_cmd_send(peer
, PERF_CMD_SXLAT
, peer
->inbuf_xlat
);
638 if (test_and_clear_bit(PERF_CMD_RXLAT
, &peer
->sts
))
639 perf_setup_outbuf(peer
);
641 if (test_and_clear_bit(PERF_CMD_CLEAR
, &peer
->sts
)) {
642 clear_bit(PERF_STS_DONE
, &peer
->sts
);
643 if (test_bit(0, &peer
->perf
->busy_flag
) &&
644 peer
== peer
->perf
->test_peer
) {
645 dev_warn(&peer
->perf
->ntb
->dev
,
646 "Freeing while test on-fly\n");
647 perf_terminate_test(peer
->perf
);
649 perf_free_outbuf(peer
);
650 perf_free_inbuf(peer
);
654 static int perf_init_service(struct perf_ctx
*perf
)
658 if (ntb_peer_mw_count(perf
->ntb
) < perf
->pcnt
+ 1) {
659 dev_err(&perf
->ntb
->dev
, "Not enough memory windows\n");
663 if (ntb_msg_count(perf
->ntb
) >= PERF_MSG_CNT
) {
664 perf
->cmd_send
= perf_msg_cmd_send
;
665 perf
->cmd_recv
= perf_msg_cmd_recv
;
667 dev_dbg(&perf
->ntb
->dev
, "Message service initialized\n");
672 dev_dbg(&perf
->ntb
->dev
, "Message service unsupported\n");
674 mask
= GENMASK_ULL(perf
->pcnt
, 0);
675 if (ntb_spad_count(perf
->ntb
) >= PERF_SPAD_CNT(perf
->pcnt
) &&
676 (ntb_db_valid_mask(perf
->ntb
) & mask
) == mask
) {
677 perf
->cmd_send
= perf_spad_cmd_send
;
678 perf
->cmd_recv
= perf_spad_cmd_recv
;
680 dev_dbg(&perf
->ntb
->dev
, "Scratchpad service initialized\n");
685 dev_dbg(&perf
->ntb
->dev
, "Scratchpad service unsupported\n");
687 dev_err(&perf
->ntb
->dev
, "Command services unsupported\n");
692 static int perf_enable_service(struct perf_ctx
*perf
)
697 mask
= ntb_db_valid_mask(perf
->ntb
);
698 (void)ntb_db_set_mask(perf
->ntb
, mask
);
700 ret
= ntb_set_ctx(perf
->ntb
, perf
, &perf_ops
);
704 if (perf
->cmd_send
== perf_msg_cmd_send
) {
707 inbits
= ntb_msg_inbits(perf
->ntb
);
708 outbits
= ntb_msg_outbits(perf
->ntb
);
709 (void)ntb_msg_set_mask(perf
->ntb
, inbits
| outbits
);
711 incmd_bit
= BIT_ULL(__ffs64(inbits
));
712 ret
= ntb_msg_clear_mask(perf
->ntb
, incmd_bit
);
714 dev_dbg(&perf
->ntb
->dev
, "MSG sts unmasked %#llx\n", incmd_bit
);
716 scnt
= ntb_spad_count(perf
->ntb
);
717 for (sidx
= 0; sidx
< scnt
; sidx
++)
718 ntb_spad_write(perf
->ntb
, sidx
, PERF_CMD_INVAL
);
719 incmd_bit
= PERF_SPAD_NOTIFY(perf
->gidx
);
720 ret
= ntb_db_clear_mask(perf
->ntb
, incmd_bit
);
722 dev_dbg(&perf
->ntb
->dev
, "DB bits unmasked %#llx\n", incmd_bit
);
725 ntb_clear_ctx(perf
->ntb
);
729 ntb_link_enable(perf
->ntb
, NTB_SPEED_AUTO
, NTB_WIDTH_AUTO
);
730 /* Might be not necessary */
731 ntb_link_event(perf
->ntb
);
736 static void perf_disable_service(struct perf_ctx
*perf
)
740 ntb_link_disable(perf
->ntb
);
742 if (perf
->cmd_send
== perf_msg_cmd_send
) {
745 inbits
= ntb_msg_inbits(perf
->ntb
);
746 (void)ntb_msg_set_mask(perf
->ntb
, inbits
);
748 (void)ntb_db_set_mask(perf
->ntb
, PERF_SPAD_NOTIFY(perf
->gidx
));
751 ntb_clear_ctx(perf
->ntb
);
753 for (pidx
= 0; pidx
< perf
->pcnt
; pidx
++)
754 perf_cmd_exec(&perf
->peers
[pidx
], PERF_CMD_CLEAR
);
756 for (pidx
= 0; pidx
< perf
->pcnt
; pidx
++)
757 flush_work(&perf
->peers
[pidx
].service
);
760 /*==============================================================================
761 * Performance measuring work-thread
762 *==============================================================================
765 static void perf_dma_copy_callback(void *data
)
767 struct perf_thread
*pthr
= data
;
769 atomic_dec(&pthr
->dma_sync
);
770 wake_up(&pthr
->dma_wait
);
773 static int perf_copy_chunk(struct perf_thread
*pthr
,
774 void __iomem
*dst
, void *src
, size_t len
)
776 struct dma_async_tx_descriptor
*tx
;
777 struct dmaengine_unmap_data
*unmap
;
778 struct device
*dma_dev
;
779 int try = 0, ret
= 0;
782 memcpy_toio(dst
, src
, len
);
783 goto ret_check_tsync
;
786 dma_dev
= pthr
->dma_chan
->device
->dev
;
788 if (!is_dma_copy_aligned(pthr
->dma_chan
->device
, offset_in_page(src
),
789 offset_in_page(dst
), len
))
792 unmap
= dmaengine_get_unmap_data(dma_dev
, 2, GFP_NOWAIT
);
797 unmap
->addr
[0] = dma_map_page(dma_dev
, virt_to_page(src
),
798 offset_in_page(src
), len
, DMA_TO_DEVICE
);
799 if (dma_mapping_error(dma_dev
, unmap
->addr
[0])) {
801 goto err_free_resource
;
805 unmap
->addr
[1] = dma_map_page(dma_dev
, virt_to_page(dst
),
806 offset_in_page(dst
), len
, DMA_FROM_DEVICE
);
807 if (dma_mapping_error(dma_dev
, unmap
->addr
[1])) {
809 goto err_free_resource
;
814 tx
= dmaengine_prep_dma_memcpy(pthr
->dma_chan
, unmap
->addr
[1],
815 unmap
->addr
[0], len
, DMA_PREP_INTERRUPT
| DMA_CTRL_ACK
);
818 } while (!tx
&& (try++ < DMA_TRIES
));
822 goto err_free_resource
;
825 tx
->callback
= perf_dma_copy_callback
;
826 tx
->callback_param
= pthr
;
827 dma_set_unmap(tx
, unmap
);
829 ret
= dma_submit_error(dmaengine_submit(tx
));
831 dmaengine_unmap_put(unmap
);
832 goto err_free_resource
;
835 dmaengine_unmap_put(unmap
);
837 atomic_inc(&pthr
->dma_sync
);
838 dma_async_issue_pending(pthr
->dma_chan
);
841 return likely(atomic_read(&pthr
->perf
->tsync
) > 0) ? 0 : -EINTR
;
844 dmaengine_unmap_put(unmap
);
849 static bool perf_dma_filter(struct dma_chan
*chan
, void *data
)
851 struct perf_ctx
*perf
= data
;
854 node
= dev_to_node(&perf
->ntb
->dev
);
856 return node
== NUMA_NO_NODE
|| node
== dev_to_node(chan
->device
->dev
);
859 static int perf_init_test(struct perf_thread
*pthr
)
861 struct perf_ctx
*perf
= pthr
->perf
;
862 dma_cap_mask_t dma_mask
;
864 pthr
->src
= kmalloc_node(perf
->test_peer
->outbuf_size
, GFP_KERNEL
,
865 dev_to_node(&perf
->ntb
->dev
));
869 get_random_bytes(pthr
->src
, perf
->test_peer
->outbuf_size
);
874 dma_cap_zero(dma_mask
);
875 dma_cap_set(DMA_MEMCPY
, dma_mask
);
876 pthr
->dma_chan
= dma_request_channel(dma_mask
, perf_dma_filter
, perf
);
877 if (!pthr
->dma_chan
) {
878 dev_err(&perf
->ntb
->dev
, "%d: Failed to get DMA channel\n",
880 atomic_dec(&perf
->tsync
);
881 wake_up(&perf
->twait
);
886 atomic_set(&pthr
->dma_sync
, 0);
891 static int perf_run_test(struct perf_thread
*pthr
)
893 struct perf_peer
*peer
= pthr
->perf
->test_peer
;
894 struct perf_ctx
*perf
= pthr
->perf
;
895 void __iomem
*flt_dst
, *bnd_dst
;
896 u64 total_size
, chunk_size
;
900 total_size
= 1ULL << total_order
;
901 chunk_size
= 1ULL << chunk_order
;
902 chunk_size
= min_t(u64
, peer
->outbuf_size
, chunk_size
);
905 bnd_dst
= peer
->outbuf
+ peer
->outbuf_size
;
906 flt_dst
= peer
->outbuf
;
908 pthr
->duration
= ktime_get();
910 /* Copied field is cleared on test launch stage */
911 while (pthr
->copied
< total_size
) {
912 ret
= perf_copy_chunk(pthr
, flt_dst
, flt_src
, chunk_size
);
914 dev_err(&perf
->ntb
->dev
, "%d: Got error %d on test\n",
919 pthr
->copied
+= chunk_size
;
921 flt_dst
+= chunk_size
;
922 flt_src
+= chunk_size
;
923 if (flt_dst
>= bnd_dst
|| flt_dst
< peer
->outbuf
) {
924 flt_dst
= peer
->outbuf
;
928 /* Give up CPU to give a chance for other threads to use it */
935 static int perf_sync_test(struct perf_thread
*pthr
)
937 struct perf_ctx
*perf
= pthr
->perf
;
942 wait_event(pthr
->dma_wait
,
943 (atomic_read(&pthr
->dma_sync
) == 0 ||
944 atomic_read(&perf
->tsync
) < 0));
946 if (atomic_read(&perf
->tsync
) < 0)
950 pthr
->duration
= ktime_sub(ktime_get(), pthr
->duration
);
952 dev_dbg(&perf
->ntb
->dev
, "%d: copied %llu bytes\n",
953 pthr
->tidx
, pthr
->copied
);
955 dev_dbg(&perf
->ntb
->dev
, "%d: lasted %llu usecs\n",
956 pthr
->tidx
, ktime_to_us(pthr
->duration
));
958 dev_dbg(&perf
->ntb
->dev
, "%d: %llu MBytes/s\n", pthr
->tidx
,
959 div64_u64(pthr
->copied
, ktime_to_us(pthr
->duration
)));
964 static void perf_clear_test(struct perf_thread
*pthr
)
966 struct perf_ctx
*perf
= pthr
->perf
;
972 * If test finished without errors, termination isn't needed.
973 * We call it anyway just to be sure of the transfers completion.
975 (void)dmaengine_terminate_sync(pthr
->dma_chan
);
977 dma_release_channel(pthr
->dma_chan
);
980 atomic_dec(&perf
->tsync
);
981 wake_up(&perf
->twait
);
985 static void perf_thread_work(struct work_struct
*work
)
987 struct perf_thread
*pthr
= to_thread_work(work
);
991 * Perform stages in compliance with use_dma flag value.
992 * Test status is changed only if error happened, otherwise
993 * status -ENODATA is kept while test is on-fly. Results
994 * synchronization is performed only if test fininshed
995 * without an error or interruption.
997 ret
= perf_init_test(pthr
);
1003 ret
= perf_run_test(pthr
);
1006 goto err_clear_test
;
1009 pthr
->status
= perf_sync_test(pthr
);
1012 perf_clear_test(pthr
);
1015 static int perf_set_tcnt(struct perf_ctx
*perf
, u8 tcnt
)
1017 if (tcnt
== 0 || tcnt
> MAX_THREADS_CNT
)
1020 if (test_and_set_bit_lock(0, &perf
->busy_flag
))
1025 clear_bit_unlock(0, &perf
->busy_flag
);
1030 static void perf_terminate_test(struct perf_ctx
*perf
)
1034 atomic_set(&perf
->tsync
, -1);
1035 wake_up(&perf
->twait
);
1037 for (tidx
= 0; tidx
< MAX_THREADS_CNT
; tidx
++) {
1038 wake_up(&perf
->threads
[tidx
].dma_wait
);
1039 cancel_work_sync(&perf
->threads
[tidx
].work
);
1043 static int perf_submit_test(struct perf_peer
*peer
)
1045 struct perf_ctx
*perf
= peer
->perf
;
1046 struct perf_thread
*pthr
;
1049 if (!test_bit(PERF_STS_DONE
, &peer
->sts
))
1052 if (test_and_set_bit_lock(0, &perf
->busy_flag
))
1055 perf
->test_peer
= peer
;
1056 atomic_set(&perf
->tsync
, perf
->tcnt
);
1058 for (tidx
= 0; tidx
< MAX_THREADS_CNT
; tidx
++) {
1059 pthr
= &perf
->threads
[tidx
];
1061 pthr
->status
= -ENODATA
;
1063 pthr
->duration
= ktime_set(0, 0);
1064 if (tidx
< perf
->tcnt
)
1065 (void)queue_work(perf_wq
, &pthr
->work
);
1068 ret
= wait_event_interruptible(perf
->twait
,
1069 atomic_read(&perf
->tsync
) <= 0);
1070 if (ret
== -ERESTARTSYS
) {
1071 perf_terminate_test(perf
);
1075 clear_bit_unlock(0, &perf
->busy_flag
);
1080 static int perf_read_stats(struct perf_ctx
*perf
, char *buf
,
1081 size_t size
, ssize_t
*pos
)
1083 struct perf_thread
*pthr
;
1086 if (test_and_set_bit_lock(0, &perf
->busy_flag
))
1089 (*pos
) += scnprintf(buf
+ *pos
, size
- *pos
,
1090 " Peer %d test statistics:\n", perf
->test_peer
->pidx
);
1092 for (tidx
= 0; tidx
< MAX_THREADS_CNT
; tidx
++) {
1093 pthr
= &perf
->threads
[tidx
];
1095 if (pthr
->status
== -ENODATA
)
1099 (*pos
) += scnprintf(buf
+ *pos
, size
- *pos
,
1100 "%d: error status %d\n", tidx
, pthr
->status
);
1104 (*pos
) += scnprintf(buf
+ *pos
, size
- *pos
,
1105 "%d: copied %llu bytes in %llu usecs, %llu MBytes/s\n",
1106 tidx
, pthr
->copied
, ktime_to_us(pthr
->duration
),
1107 div64_u64(pthr
->copied
, ktime_to_us(pthr
->duration
)));
1110 clear_bit_unlock(0, &perf
->busy_flag
);
1115 static void perf_init_threads(struct perf_ctx
*perf
)
1117 struct perf_thread
*pthr
;
1120 perf
->tcnt
= DEF_THREADS_CNT
;
1121 perf
->test_peer
= &perf
->peers
[0];
1122 init_waitqueue_head(&perf
->twait
);
1124 for (tidx
= 0; tidx
< MAX_THREADS_CNT
; tidx
++) {
1125 pthr
= &perf
->threads
[tidx
];
1129 pthr
->status
= -ENODATA
;
1130 init_waitqueue_head(&pthr
->dma_wait
);
1131 INIT_WORK(&pthr
->work
, perf_thread_work
);
1135 static void perf_clear_threads(struct perf_ctx
*perf
)
1137 perf_terminate_test(perf
);
1140 /*==============================================================================
1142 *==============================================================================
1145 static ssize_t
perf_dbgfs_read_info(struct file
*filep
, char __user
*ubuf
,
1146 size_t size
, loff_t
*offp
)
1148 struct perf_ctx
*perf
= filep
->private_data
;
1149 struct perf_peer
*peer
;
1155 buf_size
= min_t(size_t, size
, 0x1000U
);
1157 buf
= kmalloc(buf_size
, GFP_KERNEL
);
1161 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1162 " Performance measuring tool info:\n\n");
1164 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1165 "Local port %d, Global index %d\n", ntb_port_number(perf
->ntb
),
1167 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
, "Test status: ");
1168 if (test_bit(0, &perf
->busy_flag
)) {
1169 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1170 "on-fly with port %d (%d)\n",
1171 ntb_peer_port_number(perf
->ntb
, perf
->test_peer
->pidx
),
1172 perf
->test_peer
->pidx
);
1174 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
, "idle\n");
1177 for (pidx
= 0; pidx
< perf
->pcnt
; pidx
++) {
1178 peer
= &perf
->peers
[pidx
];
1180 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1181 "Port %d (%d), Global index %d:\n",
1182 ntb_peer_port_number(perf
->ntb
, peer
->pidx
), peer
->pidx
,
1185 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1186 "\tLink status: %s\n",
1187 test_bit(PERF_STS_LNKUP
, &peer
->sts
) ? "up" : "down");
1189 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1190 "\tOut buffer addr 0x%pK\n", peer
->outbuf
);
1192 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1193 "\tOut buffer size %pa\n", &peer
->outbuf_size
);
1195 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1196 "\tOut buffer xlat 0x%016llx[p]\n", peer
->outbuf_xlat
);
1199 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1200 "\tIn buffer addr: unallocated\n");
1204 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1205 "\tIn buffer addr 0x%pK\n", peer
->inbuf
);
1207 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1208 "\tIn buffer size %pa\n", &peer
->inbuf_size
);
1210 pos
+= scnprintf(buf
+ pos
, buf_size
- pos
,
1211 "\tIn buffer xlat %pad[p]\n", &peer
->inbuf_xlat
);
1214 ret
= simple_read_from_buffer(ubuf
, size
, offp
, buf
, pos
);
1220 static const struct file_operations perf_dbgfs_info
= {
1221 .open
= simple_open
,
1222 .read
= perf_dbgfs_read_info
1225 static ssize_t
perf_dbgfs_read_run(struct file
*filep
, char __user
*ubuf
,
1226 size_t size
, loff_t
*offp
)
1228 struct perf_ctx
*perf
= filep
->private_data
;
1229 ssize_t ret
, pos
= 0;
1232 buf
= kmalloc(PERF_BUF_LEN
, GFP_KERNEL
);
1236 ret
= perf_read_stats(perf
, buf
, PERF_BUF_LEN
, &pos
);
1240 ret
= simple_read_from_buffer(ubuf
, size
, offp
, buf
, pos
);
1247 static ssize_t
perf_dbgfs_write_run(struct file
*filep
, const char __user
*ubuf
,
1248 size_t size
, loff_t
*offp
)
1250 struct perf_ctx
*perf
= filep
->private_data
;
1251 struct perf_peer
*peer
;
1254 ret
= kstrtoint_from_user(ubuf
, size
, 0, &pidx
);
1258 if (pidx
< 0 || pidx
>= perf
->pcnt
)
1261 peer
= &perf
->peers
[pidx
];
1263 ret
= perf_submit_test(peer
);
1270 static const struct file_operations perf_dbgfs_run
= {
1271 .open
= simple_open
,
1272 .read
= perf_dbgfs_read_run
,
1273 .write
= perf_dbgfs_write_run
1276 static ssize_t
perf_dbgfs_read_tcnt(struct file
*filep
, char __user
*ubuf
,
1277 size_t size
, loff_t
*offp
)
1279 struct perf_ctx
*perf
= filep
->private_data
;
1283 pos
= scnprintf(buf
, sizeof(buf
), "%hhu\n", perf
->tcnt
);
1285 return simple_read_from_buffer(ubuf
, size
, offp
, buf
, pos
);
1288 static ssize_t
perf_dbgfs_write_tcnt(struct file
*filep
,
1289 const char __user
*ubuf
,
1290 size_t size
, loff_t
*offp
)
1292 struct perf_ctx
*perf
= filep
->private_data
;
1296 ret
= kstrtou8_from_user(ubuf
, size
, 0, &val
);
1300 ret
= perf_set_tcnt(perf
, val
);
1307 static const struct file_operations perf_dbgfs_tcnt
= {
1308 .open
= simple_open
,
1309 .read
= perf_dbgfs_read_tcnt
,
1310 .write
= perf_dbgfs_write_tcnt
1313 static void perf_setup_dbgfs(struct perf_ctx
*perf
)
1315 struct pci_dev
*pdev
= perf
->ntb
->pdev
;
1317 perf
->dbgfs_dir
= debugfs_create_dir(pci_name(pdev
), perf_dbgfs_topdir
);
1318 if (!perf
->dbgfs_dir
) {
1319 dev_warn(&perf
->ntb
->dev
, "DebugFS unsupported\n");
1323 debugfs_create_file("info", 0600, perf
->dbgfs_dir
, perf
,
1326 debugfs_create_file("run", 0600, perf
->dbgfs_dir
, perf
,
1329 debugfs_create_file("threads_count", 0600, perf
->dbgfs_dir
, perf
,
1332 /* They are made read-only for test exec safety and integrity */
1333 debugfs_create_u8("chunk_order", 0500, perf
->dbgfs_dir
, &chunk_order
);
1335 debugfs_create_u8("total_order", 0500, perf
->dbgfs_dir
, &total_order
);
1337 debugfs_create_bool("use_dma", 0500, perf
->dbgfs_dir
, &use_dma
);
1340 static void perf_clear_dbgfs(struct perf_ctx
*perf
)
1342 debugfs_remove_recursive(perf
->dbgfs_dir
);
1345 /*==============================================================================
1346 * Basic driver initialization
1347 *==============================================================================
1350 static struct perf_ctx
*perf_create_data(struct ntb_dev
*ntb
)
1352 struct perf_ctx
*perf
;
1354 perf
= devm_kzalloc(&ntb
->dev
, sizeof(*perf
), GFP_KERNEL
);
1356 return ERR_PTR(-ENOMEM
);
1358 perf
->pcnt
= ntb_peer_port_count(ntb
);
1359 perf
->peers
= devm_kcalloc(&ntb
->dev
, perf
->pcnt
, sizeof(*perf
->peers
),
1362 return ERR_PTR(-ENOMEM
);
1369 static int perf_setup_peer_mw(struct perf_peer
*peer
)
1371 struct perf_ctx
*perf
= peer
->perf
;
1372 phys_addr_t phys_addr
;
1375 /* Get outbound MW parameters and map it */
1376 ret
= ntb_peer_mw_get_addr(perf
->ntb
, peer
->gidx
, &phys_addr
,
1377 &peer
->outbuf_size
);
1381 peer
->outbuf
= devm_ioremap_wc(&perf
->ntb
->dev
, phys_addr
,
1386 if (max_mw_size
&& peer
->outbuf_size
> max_mw_size
) {
1387 peer
->outbuf_size
= max_mw_size
;
1388 dev_warn(&peer
->perf
->ntb
->dev
,
1389 "Peer %d outbuf reduced to %pa\n", peer
->pidx
,
1390 &peer
->outbuf_size
);
1396 static int perf_init_peers(struct perf_ctx
*perf
)
1398 struct perf_peer
*peer
;
1399 int pidx
, lport
, ret
;
1401 lport
= ntb_port_number(perf
->ntb
);
1403 for (pidx
= 0; pidx
< perf
->pcnt
; pidx
++) {
1404 peer
= &perf
->peers
[pidx
];
1408 if (lport
< ntb_peer_port_number(perf
->ntb
, pidx
)) {
1409 if (perf
->gidx
== -1)
1411 peer
->gidx
= pidx
+ 1;
1415 INIT_WORK(&peer
->service
, perf_service_work
);
1417 if (perf
->gidx
== -1)
1420 for (pidx
= 0; pidx
< perf
->pcnt
; pidx
++) {
1421 ret
= perf_setup_peer_mw(&perf
->peers
[pidx
]);
1426 dev_dbg(&perf
->ntb
->dev
, "Global port index %d\n", perf
->gidx
);
1431 static int perf_probe(struct ntb_client
*client
, struct ntb_dev
*ntb
)
1433 struct perf_ctx
*perf
;
1436 perf
= perf_create_data(ntb
);
1438 return PTR_ERR(perf
);
1440 ret
= perf_init_peers(perf
);
1444 perf_init_threads(perf
);
1446 ret
= perf_init_service(perf
);
1450 ret
= perf_enable_service(perf
);
1454 perf_setup_dbgfs(perf
);
1459 static void perf_remove(struct ntb_client
*client
, struct ntb_dev
*ntb
)
1461 struct perf_ctx
*perf
= ntb
->ctx
;
1463 perf_clear_dbgfs(perf
);
1465 perf_disable_service(perf
);
1467 perf_clear_threads(perf
);
1470 static struct ntb_client perf_client
= {
1472 .probe
= perf_probe
,
1473 .remove
= perf_remove
1477 static int __init
perf_init(void)
1481 if (chunk_order
> MAX_CHUNK_ORDER
) {
1482 chunk_order
= MAX_CHUNK_ORDER
;
1483 pr_info("Chunk order reduced to %hhu\n", chunk_order
);
1486 if (total_order
< chunk_order
) {
1487 total_order
= chunk_order
;
1488 pr_info("Total data order reduced to %hhu\n", total_order
);
1491 perf_wq
= alloc_workqueue("perf_wq", WQ_UNBOUND
| WQ_SYSFS
, 0);
1495 if (debugfs_initialized())
1496 perf_dbgfs_topdir
= debugfs_create_dir(KBUILD_MODNAME
, NULL
);
1498 ret
= ntb_register_client(&perf_client
);
1500 debugfs_remove_recursive(perf_dbgfs_topdir
);
1501 destroy_workqueue(perf_wq
);
1506 module_init(perf_init
);
1508 static void __exit
perf_exit(void)
1510 ntb_unregister_client(&perf_client
);
1511 debugfs_remove_recursive(perf_dbgfs_topdir
);
1512 destroy_workqueue(perf_wq
);
1514 module_exit(perf_exit
);