2 3w-sas.c -- LSI 3ware SAS/SATA-RAID Controller device driver for Linux.
4 Written By: Adam Radford <linuxraid@lsi.com>
6 Copyright (C) 2009 LSI Corporation.
8 This program is free software; you can redistribute it and/or modify
9 it under the terms of the GNU General Public License as published by
10 the Free Software Foundation; version 2 of the License.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
18 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
19 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
20 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
21 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
22 solely responsible for determining the appropriateness of using and
23 distributing the Program and assumes all risks associated with its
24 exercise of rights under this Agreement, including but not limited to
25 the risks and costs of program errors, damage to or loss of data,
26 programs or equipment, and unavailability or interruption of operations.
28 DISCLAIMER OF LIABILITY
29 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
30 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
31 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
32 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
33 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
34 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
35 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
37 You should have received a copy of the GNU General Public License
38 along with this program; if not, write to the Free Software
39 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
41 Controllers supported by this driver:
43 LSI 3ware 9750 6Gb/s SAS/SATA-RAID
45 Bugs/Comments/Suggestions should be mailed to:
48 For more information, goto:
53 3.26.02.000 - Initial driver release.
56 #include <linux/module.h>
57 #include <linux/reboot.h>
58 #include <linux/spinlock.h>
59 #include <linux/interrupt.h>
60 #include <linux/moduleparam.h>
61 #include <linux/errno.h>
62 #include <linux/types.h>
63 #include <linux/delay.h>
64 #include <linux/pci.h>
65 #include <linux/time.h>
66 #include <linux/mutex.h>
67 #include <linux/slab.h>
70 #include <asm/uaccess.h>
71 #include <scsi/scsi.h>
72 #include <scsi/scsi_host.h>
73 #include <scsi/scsi_tcq.h>
74 #include <scsi/scsi_cmnd.h>
78 #define TW_DRIVER_VERSION "3.26.02.000"
79 static DEFINE_MUTEX(twl_chrdev_mutex
);
80 static TW_Device_Extension
*twl_device_extension_list
[TW_MAX_SLOT
];
81 static unsigned int twl_device_extension_count
;
82 static int twl_major
= -1;
83 extern struct timezone sys_tz
;
85 /* Module parameters */
86 MODULE_AUTHOR ("LSI");
87 MODULE_DESCRIPTION ("LSI 3ware SAS/SATA-RAID Linux Driver");
88 MODULE_LICENSE("GPL");
89 MODULE_VERSION(TW_DRIVER_VERSION
);
92 module_param(use_msi
, int, S_IRUGO
);
93 MODULE_PARM_DESC(use_msi
, "Use Message Signaled Interrupts. Default: 0");
95 /* Function prototypes */
96 static int twl_reset_device_extension(TW_Device_Extension
*tw_dev
, int ioctl_reset
);
100 /* This function returns AENs through sysfs */
101 static ssize_t
twl_sysfs_aen_read(struct file
*filp
, struct kobject
*kobj
,
102 struct bin_attribute
*bin_attr
,
103 char *outbuf
, loff_t offset
, size_t count
)
105 struct device
*dev
= container_of(kobj
, struct device
, kobj
);
106 struct Scsi_Host
*shost
= class_to_shost(dev
);
107 TW_Device_Extension
*tw_dev
= (TW_Device_Extension
*)shost
->hostdata
;
108 unsigned long flags
= 0;
111 if (!capable(CAP_SYS_ADMIN
))
114 spin_lock_irqsave(tw_dev
->host
->host_lock
, flags
);
115 ret
= memory_read_from_buffer(outbuf
, count
, &offset
, tw_dev
->event_queue
[0], sizeof(TW_Event
) * TW_Q_LENGTH
);
116 spin_unlock_irqrestore(tw_dev
->host
->host_lock
, flags
);
119 } /* End twl_sysfs_aen_read() */
121 /* aen_read sysfs attribute initializer */
122 static struct bin_attribute twl_sysfs_aen_read_attr
= {
124 .name
= "3ware_aen_read",
128 .read
= twl_sysfs_aen_read
131 /* This function returns driver compatibility info through sysfs */
132 static ssize_t
twl_sysfs_compat_info(struct file
*filp
, struct kobject
*kobj
,
133 struct bin_attribute
*bin_attr
,
134 char *outbuf
, loff_t offset
, size_t count
)
136 struct device
*dev
= container_of(kobj
, struct device
, kobj
);
137 struct Scsi_Host
*shost
= class_to_shost(dev
);
138 TW_Device_Extension
*tw_dev
= (TW_Device_Extension
*)shost
->hostdata
;
139 unsigned long flags
= 0;
142 if (!capable(CAP_SYS_ADMIN
))
145 spin_lock_irqsave(tw_dev
->host
->host_lock
, flags
);
146 ret
= memory_read_from_buffer(outbuf
, count
, &offset
, &tw_dev
->tw_compat_info
, sizeof(TW_Compatibility_Info
));
147 spin_unlock_irqrestore(tw_dev
->host
->host_lock
, flags
);
150 } /* End twl_sysfs_compat_info() */
152 /* compat_info sysfs attribute initializer */
153 static struct bin_attribute twl_sysfs_compat_info_attr
= {
155 .name
= "3ware_compat_info",
159 .read
= twl_sysfs_compat_info
162 /* Show some statistics about the card */
163 static ssize_t
twl_show_stats(struct device
*dev
,
164 struct device_attribute
*attr
, char *buf
)
166 struct Scsi_Host
*host
= class_to_shost(dev
);
167 TW_Device_Extension
*tw_dev
= (TW_Device_Extension
*)host
->hostdata
;
168 unsigned long flags
= 0;
171 spin_lock_irqsave(tw_dev
->host
->host_lock
, flags
);
172 len
= snprintf(buf
, PAGE_SIZE
, "3w-sas Driver version: %s\n"
173 "Current commands posted: %4d\n"
174 "Max commands posted: %4d\n"
175 "Last sgl length: %4d\n"
176 "Max sgl length: %4d\n"
177 "Last sector count: %4d\n"
178 "Max sector count: %4d\n"
179 "SCSI Host Resets: %4d\n"
182 tw_dev
->posted_request_count
,
183 tw_dev
->max_posted_request_count
,
185 tw_dev
->max_sgl_entries
,
186 tw_dev
->sector_count
,
187 tw_dev
->max_sector_count
,
190 spin_unlock_irqrestore(tw_dev
->host
->host_lock
, flags
);
192 } /* End twl_show_stats() */
194 /* This function will set a devices queue depth */
195 static int twl_change_queue_depth(struct scsi_device
*sdev
, int queue_depth
,
198 if (reason
!= SCSI_QDEPTH_DEFAULT
)
201 if (queue_depth
> TW_Q_LENGTH
-2)
202 queue_depth
= TW_Q_LENGTH
-2;
203 scsi_adjust_queue_depth(sdev
, MSG_ORDERED_TAG
, queue_depth
);
205 } /* End twl_change_queue_depth() */
207 /* stats sysfs attribute initializer */
208 static struct device_attribute twl_host_stats_attr
= {
210 .name
= "3ware_stats",
213 .show
= twl_show_stats
216 /* Host attributes initializer */
217 static struct device_attribute
*twl_host_attrs
[] = {
218 &twl_host_stats_attr
,
222 /* This function will look up an AEN severity string */
223 static char *twl_aen_severity_lookup(unsigned char severity_code
)
227 if ((severity_code
< (unsigned char) TW_AEN_SEVERITY_ERROR
) ||
228 (severity_code
> (unsigned char) TW_AEN_SEVERITY_DEBUG
))
231 retval
= twl_aen_severity_table
[severity_code
];
234 } /* End twl_aen_severity_lookup() */
236 /* This function will queue an event */
237 static void twl_aen_queue_event(TW_Device_Extension
*tw_dev
, TW_Command_Apache_Header
*header
)
248 /* Fill out event info */
249 event
= tw_dev
->event_queue
[tw_dev
->error_index
];
253 sprintf(host
, " scsi%d:", tw_dev
->host
->host_no
);
255 aen
= le16_to_cpu(header
->status_block
.error
);
256 memset(event
, 0, sizeof(TW_Event
));
258 event
->severity
= TW_SEV_OUT(header
->status_block
.severity__reserved
);
259 do_gettimeofday(&time
);
260 local_time
= (u32
)(time
.tv_sec
- (sys_tz
.tz_minuteswest
* 60));
261 event
->time_stamp_sec
= local_time
;
262 event
->aen_code
= aen
;
263 event
->retrieved
= TW_AEN_NOT_RETRIEVED
;
264 event
->sequence_id
= tw_dev
->error_sequence_id
;
265 tw_dev
->error_sequence_id
++;
267 /* Check for embedded error string */
268 error_str
= &(header
->err_specific_desc
[strlen(header
->err_specific_desc
)+1]);
270 header
->err_specific_desc
[sizeof(header
->err_specific_desc
) - 1] = '\0';
271 event
->parameter_len
= strlen(header
->err_specific_desc
);
272 memcpy(event
->parameter_data
, header
->err_specific_desc
, event
->parameter_len
+ 1 + strlen(error_str
));
273 if (event
->severity
!= TW_AEN_SEVERITY_DEBUG
)
274 printk(KERN_WARNING
"3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n",
276 twl_aen_severity_lookup(TW_SEV_OUT(header
->status_block
.severity__reserved
)),
277 TW_MESSAGE_SOURCE_CONTROLLER_EVENT
, aen
, error_str
,
278 header
->err_specific_desc
);
282 tw_dev
->error_index
= (tw_dev
->error_index
+ 1 ) % TW_Q_LENGTH
;
283 } /* End twl_aen_queue_event() */
285 /* This function will attempt to post a command packet to the board */
286 static int twl_post_command_packet(TW_Device_Extension
*tw_dev
, int request_id
)
288 dma_addr_t command_que_value
;
290 command_que_value
= tw_dev
->command_packet_phys
[request_id
];
291 command_que_value
+= TW_COMMAND_OFFSET
;
293 /* First write upper 4 bytes */
294 writel((u32
)((u64
)command_que_value
>> 32), TWL_HIBQPH_REG_ADDR(tw_dev
));
295 /* Then the lower 4 bytes */
296 writel((u32
)(command_que_value
| TWL_PULL_MODE
), TWL_HIBQPL_REG_ADDR(tw_dev
));
298 tw_dev
->state
[request_id
] = TW_S_POSTED
;
299 tw_dev
->posted_request_count
++;
300 if (tw_dev
->posted_request_count
> tw_dev
->max_posted_request_count
)
301 tw_dev
->max_posted_request_count
= tw_dev
->posted_request_count
;
304 } /* End twl_post_command_packet() */
306 /* This function will perform a pci-dma mapping for a scatter gather list */
307 static int twl_map_scsi_sg_data(TW_Device_Extension
*tw_dev
, int request_id
)
310 struct scsi_cmnd
*cmd
= tw_dev
->srb
[request_id
];
312 use_sg
= scsi_dma_map(cmd
);
315 else if (use_sg
< 0) {
316 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x1, "Failed to map scatter gather list");
320 cmd
->SCp
.phase
= TW_PHASE_SGLIST
;
321 cmd
->SCp
.have_data_in
= use_sg
;
324 } /* End twl_map_scsi_sg_data() */
326 /* This function hands scsi cdb's to the firmware */
327 static int twl_scsiop_execute_scsi(TW_Device_Extension
*tw_dev
, int request_id
, char *cdb
, int use_sg
, TW_SG_Entry_ISO
*sglistarg
)
329 TW_Command_Full
*full_command_packet
;
330 TW_Command_Apache
*command_packet
;
332 struct scsi_cmnd
*srb
= NULL
;
333 struct scatterlist
*sglist
= NULL
, *sg
;
336 if (tw_dev
->srb
[request_id
]) {
337 srb
= tw_dev
->srb
[request_id
];
338 if (scsi_sglist(srb
))
339 sglist
= scsi_sglist(srb
);
342 /* Initialize command packet */
343 full_command_packet
= tw_dev
->command_packet_virt
[request_id
];
344 full_command_packet
->header
.header_desc
.size_header
= 128;
345 full_command_packet
->header
.status_block
.error
= 0;
346 full_command_packet
->header
.status_block
.severity__reserved
= 0;
348 command_packet
= &full_command_packet
->command
.newcommand
;
349 command_packet
->status
= 0;
350 command_packet
->opcode__reserved
= TW_OPRES_IN(0, TW_OP_EXECUTE_SCSI
);
352 /* We forced 16 byte cdb use earlier */
354 memcpy(command_packet
->cdb
, srb
->cmnd
, TW_MAX_CDB_LEN
);
356 memcpy(command_packet
->cdb
, cdb
, TW_MAX_CDB_LEN
);
359 command_packet
->unit
= srb
->device
->id
;
360 command_packet
->request_id__lunl
=
361 cpu_to_le16(TW_REQ_LUN_IN(srb
->device
->lun
, request_id
));
363 command_packet
->request_id__lunl
=
364 cpu_to_le16(TW_REQ_LUN_IN(0, request_id
));
365 command_packet
->unit
= 0;
368 command_packet
->sgl_offset
= 16;
371 /* Map sglist from scsi layer to cmd packet */
372 if (scsi_sg_count(srb
)) {
373 sg_count
= twl_map_scsi_sg_data(tw_dev
, request_id
);
377 scsi_for_each_sg(srb
, sg
, sg_count
, i
) {
378 command_packet
->sg_list
[i
].address
= TW_CPU_TO_SGL(sg_dma_address(sg
));
379 command_packet
->sg_list
[i
].length
= TW_CPU_TO_SGL(sg_dma_len(sg
));
381 command_packet
->sgl_entries__lunh
= cpu_to_le16(TW_REQ_LUN_IN((srb
->device
->lun
>> 4), scsi_sg_count(tw_dev
->srb
[request_id
])));
384 /* Internal cdb post */
385 for (i
= 0; i
< use_sg
; i
++) {
386 command_packet
->sg_list
[i
].address
= TW_CPU_TO_SGL(sglistarg
[i
].address
);
387 command_packet
->sg_list
[i
].length
= TW_CPU_TO_SGL(sglistarg
[i
].length
);
389 command_packet
->sgl_entries__lunh
= cpu_to_le16(TW_REQ_LUN_IN(0, use_sg
));
392 /* Update some stats */
394 tw_dev
->sector_count
= scsi_bufflen(srb
) / 512;
395 if (tw_dev
->sector_count
> tw_dev
->max_sector_count
)
396 tw_dev
->max_sector_count
= tw_dev
->sector_count
;
397 tw_dev
->sgl_entries
= scsi_sg_count(srb
);
398 if (tw_dev
->sgl_entries
> tw_dev
->max_sgl_entries
)
399 tw_dev
->max_sgl_entries
= tw_dev
->sgl_entries
;
402 /* Now post the command to the board */
403 retval
= twl_post_command_packet(tw_dev
, request_id
);
407 } /* End twl_scsiop_execute_scsi() */
409 /* This function will read the aen queue from the isr */
410 static int twl_aen_read_queue(TW_Device_Extension
*tw_dev
, int request_id
)
412 char cdb
[TW_MAX_CDB_LEN
];
413 TW_SG_Entry_ISO sglist
[1];
414 TW_Command_Full
*full_command_packet
;
417 full_command_packet
= tw_dev
->command_packet_virt
[request_id
];
418 memset(full_command_packet
, 0, sizeof(TW_Command_Full
));
421 memset(&cdb
, 0, TW_MAX_CDB_LEN
);
422 cdb
[0] = REQUEST_SENSE
; /* opcode */
423 cdb
[4] = TW_ALLOCATION_LENGTH
; /* allocation length */
425 /* Initialize sglist */
426 memset(&sglist
, 0, sizeof(TW_SG_Entry_ISO
));
427 sglist
[0].length
= TW_SECTOR_SIZE
;
428 sglist
[0].address
= tw_dev
->generic_buffer_phys
[request_id
];
430 /* Mark internal command */
431 tw_dev
->srb
[request_id
] = NULL
;
433 /* Now post the command packet */
434 if (twl_scsiop_execute_scsi(tw_dev
, request_id
, cdb
, 1, sglist
)) {
435 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x2, "Post failed while reading AEN queue");
441 } /* End twl_aen_read_queue() */
443 /* This function will sync firmware time with the host time */
444 static void twl_aen_sync_time(TW_Device_Extension
*tw_dev
, int request_id
)
448 TW_Command_Full
*full_command_packet
;
449 TW_Command
*command_packet
;
450 TW_Param_Apache
*param
;
453 /* Fill out the command packet */
454 full_command_packet
= tw_dev
->command_packet_virt
[request_id
];
455 memset(full_command_packet
, 0, sizeof(TW_Command_Full
));
456 command_packet
= &full_command_packet
->command
.oldcommand
;
457 command_packet
->opcode__sgloffset
= TW_OPSGL_IN(2, TW_OP_SET_PARAM
);
458 command_packet
->request_id
= request_id
;
459 command_packet
->byte8_offset
.param
.sgl
[0].address
= TW_CPU_TO_SGL(tw_dev
->generic_buffer_phys
[request_id
]);
460 command_packet
->byte8_offset
.param
.sgl
[0].length
= TW_CPU_TO_SGL(TW_SECTOR_SIZE
);
461 command_packet
->size
= TW_COMMAND_SIZE
;
462 command_packet
->byte6_offset
.parameter_count
= cpu_to_le16(1);
464 /* Setup the param */
465 param
= (TW_Param_Apache
*)tw_dev
->generic_buffer_virt
[request_id
];
466 memset(param
, 0, TW_SECTOR_SIZE
);
467 param
->table_id
= cpu_to_le16(TW_TIMEKEEP_TABLE
| 0x8000); /* Controller time keep table */
468 param
->parameter_id
= cpu_to_le16(0x3); /* SchedulerTime */
469 param
->parameter_size_bytes
= cpu_to_le16(4);
471 /* Convert system time in UTC to local time seconds since last
473 do_gettimeofday(&utc
);
474 local_time
= (u32
)(utc
.tv_sec
- (sys_tz
.tz_minuteswest
* 60));
475 schedulertime
= local_time
- (3 * 86400);
476 schedulertime
= cpu_to_le32(schedulertime
% 604800);
478 memcpy(param
->data
, &schedulertime
, sizeof(u32
));
480 /* Mark internal command */
481 tw_dev
->srb
[request_id
] = NULL
;
483 /* Now post the command */
484 twl_post_command_packet(tw_dev
, request_id
);
485 } /* End twl_aen_sync_time() */
487 /* This function will assign an available request id */
488 static void twl_get_request_id(TW_Device_Extension
*tw_dev
, int *request_id
)
490 *request_id
= tw_dev
->free_queue
[tw_dev
->free_head
];
491 tw_dev
->free_head
= (tw_dev
->free_head
+ 1) % TW_Q_LENGTH
;
492 tw_dev
->state
[*request_id
] = TW_S_STARTED
;
493 } /* End twl_get_request_id() */
495 /* This function will free a request id */
496 static void twl_free_request_id(TW_Device_Extension
*tw_dev
, int request_id
)
498 tw_dev
->free_queue
[tw_dev
->free_tail
] = request_id
;
499 tw_dev
->state
[request_id
] = TW_S_FINISHED
;
500 tw_dev
->free_tail
= (tw_dev
->free_tail
+ 1) % TW_Q_LENGTH
;
501 } /* End twl_free_request_id() */
503 /* This function will complete an aen request from the isr */
504 static int twl_aen_complete(TW_Device_Extension
*tw_dev
, int request_id
)
506 TW_Command_Full
*full_command_packet
;
507 TW_Command
*command_packet
;
508 TW_Command_Apache_Header
*header
;
512 header
= (TW_Command_Apache_Header
*)tw_dev
->generic_buffer_virt
[request_id
];
513 tw_dev
->posted_request_count
--;
514 aen
= le16_to_cpu(header
->status_block
.error
);
515 full_command_packet
= tw_dev
->command_packet_virt
[request_id
];
516 command_packet
= &full_command_packet
->command
.oldcommand
;
518 /* First check for internal completion of set param for time sync */
519 if (TW_OP_OUT(command_packet
->opcode__sgloffset
) == TW_OP_SET_PARAM
) {
520 /* Keep reading the queue in case there are more aen's */
521 if (twl_aen_read_queue(tw_dev
, request_id
))
530 case TW_AEN_QUEUE_EMPTY
:
531 /* Quit reading the queue if this is the last one */
533 case TW_AEN_SYNC_TIME_WITH_HOST
:
534 twl_aen_sync_time(tw_dev
, request_id
);
538 twl_aen_queue_event(tw_dev
, header
);
540 /* If there are more aen's, keep reading the queue */
541 if (twl_aen_read_queue(tw_dev
, request_id
))
550 tw_dev
->state
[request_id
] = TW_S_COMPLETED
;
551 twl_free_request_id(tw_dev
, request_id
);
552 clear_bit(TW_IN_ATTENTION_LOOP
, &tw_dev
->flags
);
555 } /* End twl_aen_complete() */
557 /* This function will poll for a response */
558 static int twl_poll_response(TW_Device_Extension
*tw_dev
, int request_id
, int seconds
)
560 unsigned long before
;
570 if (sizeof(dma_addr_t
) > 4) {
571 regh
= readl(TWL_HOBQPH_REG_ADDR(tw_dev
));
572 regl
= readl(TWL_HOBQPL_REG_ADDR(tw_dev
));
573 mfa
= ((u64
)regh
<< 32) | regl
;
575 mfa
= readl(TWL_HOBQPL_REG_ADDR(tw_dev
));
579 if (TW_RESID_OUT(response
) == request_id
)
582 if (time_after(jiffies
, before
+ HZ
* seconds
))
590 } /* End twl_poll_response() */
592 /* This function will drain the aen queue */
593 static int twl_aen_drain_queue(TW_Device_Extension
*tw_dev
, int no_check_reset
)
596 char cdb
[TW_MAX_CDB_LEN
];
597 TW_SG_Entry_ISO sglist
[1];
598 int finished
= 0, count
= 0;
599 TW_Command_Full
*full_command_packet
;
600 TW_Command_Apache_Header
*header
;
602 int first_reset
= 0, queue
= 0, retval
= 1;
609 full_command_packet
= tw_dev
->command_packet_virt
[request_id
];
610 memset(full_command_packet
, 0, sizeof(TW_Command_Full
));
613 memset(&cdb
, 0, TW_MAX_CDB_LEN
);
614 cdb
[0] = REQUEST_SENSE
; /* opcode */
615 cdb
[4] = TW_ALLOCATION_LENGTH
; /* allocation length */
617 /* Initialize sglist */
618 memset(&sglist
, 0, sizeof(TW_SG_Entry_ISO
));
619 sglist
[0].length
= TW_SECTOR_SIZE
;
620 sglist
[0].address
= tw_dev
->generic_buffer_phys
[request_id
];
622 /* Mark internal command */
623 tw_dev
->srb
[request_id
] = NULL
;
626 /* Send command to the board */
627 if (twl_scsiop_execute_scsi(tw_dev
, request_id
, cdb
, 1, sglist
)) {
628 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x3, "Error posting request sense");
632 /* Now poll for completion */
633 if (twl_poll_response(tw_dev
, request_id
, 30)) {
634 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x4, "No valid response while draining AEN queue");
635 tw_dev
->posted_request_count
--;
639 tw_dev
->posted_request_count
--;
640 header
= (TW_Command_Apache_Header
*)tw_dev
->generic_buffer_virt
[request_id
];
641 aen
= le16_to_cpu(header
->status_block
.error
);
646 case TW_AEN_QUEUE_EMPTY
:
647 if (first_reset
!= 1)
652 case TW_AEN_SOFT_RESET
:
653 if (first_reset
== 0)
658 case TW_AEN_SYNC_TIME_WITH_HOST
:
664 /* Now queue an event info */
666 twl_aen_queue_event(tw_dev
, header
);
667 } while ((finished
== 0) && (count
< TW_MAX_AEN_DRAIN
));
669 if (count
== TW_MAX_AEN_DRAIN
)
674 tw_dev
->state
[request_id
] = TW_S_INITIAL
;
676 } /* End twl_aen_drain_queue() */
678 /* This function will allocate memory and check if it is correctly aligned */
679 static int twl_allocate_memory(TW_Device_Extension
*tw_dev
, int size
, int which
)
682 dma_addr_t dma_handle
;
683 unsigned long *cpu_addr
;
686 cpu_addr
= pci_alloc_consistent(tw_dev
->tw_pci_dev
, size
*TW_Q_LENGTH
, &dma_handle
);
688 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x5, "Memory allocation failed");
692 memset(cpu_addr
, 0, size
*TW_Q_LENGTH
);
694 for (i
= 0; i
< TW_Q_LENGTH
; i
++) {
697 tw_dev
->command_packet_phys
[i
] = dma_handle
+(i
*size
);
698 tw_dev
->command_packet_virt
[i
] = (TW_Command_Full
*)((unsigned char *)cpu_addr
+ (i
*size
));
701 tw_dev
->generic_buffer_phys
[i
] = dma_handle
+(i
*size
);
702 tw_dev
->generic_buffer_virt
[i
] = (unsigned long *)((unsigned char *)cpu_addr
+ (i
*size
));
705 tw_dev
->sense_buffer_phys
[i
] = dma_handle
+(i
*size
);
706 tw_dev
->sense_buffer_virt
[i
] = (TW_Command_Apache_Header
*)((unsigned char *)cpu_addr
+ (i
*size
));
713 } /* End twl_allocate_memory() */
715 /* This function will load the request id and various sgls for ioctls */
716 static void twl_load_sgl(TW_Device_Extension
*tw_dev
, TW_Command_Full
*full_command_packet
, int request_id
, dma_addr_t dma_handle
, int length
)
718 TW_Command
*oldcommand
;
719 TW_Command_Apache
*newcommand
;
720 TW_SG_Entry_ISO
*sgl
;
721 unsigned int pae
= 0;
723 if ((sizeof(long) < 8) && (sizeof(dma_addr_t
) > 4))
726 if (TW_OP_OUT(full_command_packet
->command
.newcommand
.opcode__reserved
) == TW_OP_EXECUTE_SCSI
) {
727 newcommand
= &full_command_packet
->command
.newcommand
;
728 newcommand
->request_id__lunl
=
729 cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand
->request_id__lunl
), request_id
));
731 newcommand
->sg_list
[0].address
= TW_CPU_TO_SGL(dma_handle
+ sizeof(TW_Ioctl_Buf_Apache
) - 1);
732 newcommand
->sg_list
[0].length
= TW_CPU_TO_SGL(length
);
734 newcommand
->sgl_entries__lunh
=
735 cpu_to_le16(TW_REQ_LUN_IN(TW_LUN_OUT(newcommand
->sgl_entries__lunh
), length
? 1 : 0));
737 oldcommand
= &full_command_packet
->command
.oldcommand
;
738 oldcommand
->request_id
= request_id
;
740 if (TW_SGL_OUT(oldcommand
->opcode__sgloffset
)) {
741 /* Load the sg list */
742 sgl
= (TW_SG_Entry_ISO
*)((u32
*)oldcommand
+oldcommand
->size
- (sizeof(TW_SG_Entry_ISO
)/4) + pae
+ (sizeof(dma_addr_t
) > 4 ? 1 : 0));
743 sgl
->address
= TW_CPU_TO_SGL(dma_handle
+ sizeof(TW_Ioctl_Buf_Apache
) - 1);
744 sgl
->length
= TW_CPU_TO_SGL(length
);
745 oldcommand
->size
+= pae
;
746 oldcommand
->size
+= sizeof(dma_addr_t
) > 4 ? 1 : 0;
749 } /* End twl_load_sgl() */
751 /* This function handles ioctl for the character device
752 This interface is used by smartmontools open source software */
753 static long twl_chrdev_ioctl(struct file
*file
, unsigned int cmd
, unsigned long arg
)
756 unsigned long *cpu_addr
, data_buffer_length_adjusted
= 0, flags
= 0;
757 dma_addr_t dma_handle
;
759 TW_Ioctl_Driver_Command driver_command
;
760 struct inode
*inode
= file_inode(file
);
761 TW_Ioctl_Buf_Apache
*tw_ioctl
;
762 TW_Command_Full
*full_command_packet
;
763 TW_Device_Extension
*tw_dev
= twl_device_extension_list
[iminor(inode
)];
764 int retval
= -EFAULT
;
765 void __user
*argp
= (void __user
*)arg
;
767 mutex_lock(&twl_chrdev_mutex
);
769 /* Only let one of these through at a time */
770 if (mutex_lock_interruptible(&tw_dev
->ioctl_lock
)) {
775 /* First copy down the driver command */
776 if (copy_from_user(&driver_command
, argp
, sizeof(TW_Ioctl_Driver_Command
)))
779 /* Check data buffer size */
780 if (driver_command
.buffer_length
> TW_MAX_SECTORS
* 2048) {
785 /* Hardware can only do multiple of 512 byte transfers */
786 data_buffer_length_adjusted
= (driver_command
.buffer_length
+ 511) & ~511;
788 /* Now allocate ioctl buf memory */
789 cpu_addr
= dma_alloc_coherent(&tw_dev
->tw_pci_dev
->dev
, data_buffer_length_adjusted
+sizeof(TW_Ioctl_Buf_Apache
) - 1, &dma_handle
, GFP_KERNEL
);
795 tw_ioctl
= (TW_Ioctl_Buf_Apache
*)cpu_addr
;
797 /* Now copy down the entire ioctl */
798 if (copy_from_user(tw_ioctl
, argp
, driver_command
.buffer_length
+ sizeof(TW_Ioctl_Buf_Apache
) - 1))
801 /* See which ioctl we are doing */
803 case TW_IOCTL_FIRMWARE_PASS_THROUGH
:
804 spin_lock_irqsave(tw_dev
->host
->host_lock
, flags
);
805 twl_get_request_id(tw_dev
, &request_id
);
807 /* Flag internal command */
808 tw_dev
->srb
[request_id
] = NULL
;
810 /* Flag chrdev ioctl */
811 tw_dev
->chrdev_request_id
= request_id
;
813 full_command_packet
= (TW_Command_Full
*)&tw_ioctl
->firmware_command
;
815 /* Load request id and sglist for both command types */
816 twl_load_sgl(tw_dev
, full_command_packet
, request_id
, dma_handle
, data_buffer_length_adjusted
);
818 memcpy(tw_dev
->command_packet_virt
[request_id
], &(tw_ioctl
->firmware_command
), sizeof(TW_Command_Full
));
820 /* Now post the command packet to the controller */
821 twl_post_command_packet(tw_dev
, request_id
);
822 spin_unlock_irqrestore(tw_dev
->host
->host_lock
, flags
);
824 timeout
= TW_IOCTL_CHRDEV_TIMEOUT
*HZ
;
826 /* Now wait for command to complete */
827 timeout
= wait_event_timeout(tw_dev
->ioctl_wqueue
, tw_dev
->chrdev_request_id
== TW_IOCTL_CHRDEV_FREE
, timeout
);
829 /* We timed out, and didn't get an interrupt */
830 if (tw_dev
->chrdev_request_id
!= TW_IOCTL_CHRDEV_FREE
) {
831 /* Now we need to reset the board */
832 printk(KERN_WARNING
"3w-sas: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n",
833 tw_dev
->host
->host_no
, TW_DRIVER
, 0x6,
836 twl_reset_device_extension(tw_dev
, 1);
840 /* Now copy in the command packet response */
841 memcpy(&(tw_ioctl
->firmware_command
), tw_dev
->command_packet_virt
[request_id
], sizeof(TW_Command_Full
));
843 /* Now complete the io */
844 spin_lock_irqsave(tw_dev
->host
->host_lock
, flags
);
845 tw_dev
->posted_request_count
--;
846 tw_dev
->state
[request_id
] = TW_S_COMPLETED
;
847 twl_free_request_id(tw_dev
, request_id
);
848 spin_unlock_irqrestore(tw_dev
->host
->host_lock
, flags
);
855 /* Now copy the entire response to userspace */
856 if (copy_to_user(argp
, tw_ioctl
, sizeof(TW_Ioctl_Buf_Apache
) + driver_command
.buffer_length
- 1) == 0)
859 /* Now free ioctl buf memory */
860 dma_free_coherent(&tw_dev
->tw_pci_dev
->dev
, data_buffer_length_adjusted
+sizeof(TW_Ioctl_Buf_Apache
) - 1, cpu_addr
, dma_handle
);
862 mutex_unlock(&tw_dev
->ioctl_lock
);
864 mutex_unlock(&twl_chrdev_mutex
);
866 } /* End twl_chrdev_ioctl() */
868 /* This function handles open for the character device */
869 static int twl_chrdev_open(struct inode
*inode
, struct file
*file
)
871 unsigned int minor_number
;
872 int retval
= -ENODEV
;
874 if (!capable(CAP_SYS_ADMIN
)) {
879 minor_number
= iminor(inode
);
880 if (minor_number
>= twl_device_extension_count
)
885 } /* End twl_chrdev_open() */
887 /* File operations struct for character device */
888 static const struct file_operations twl_fops
= {
889 .owner
= THIS_MODULE
,
890 .unlocked_ioctl
= twl_chrdev_ioctl
,
891 .open
= twl_chrdev_open
,
893 .llseek
= noop_llseek
,
896 /* This function passes sense data from firmware to scsi layer */
897 static int twl_fill_sense(TW_Device_Extension
*tw_dev
, int i
, int request_id
, int copy_sense
, int print_host
)
899 TW_Command_Apache_Header
*header
;
900 TW_Command_Full
*full_command_packet
;
901 unsigned short error
;
905 header
= tw_dev
->sense_buffer_virt
[i
];
906 full_command_packet
= tw_dev
->command_packet_virt
[request_id
];
908 /* Get embedded firmware error string */
909 error_str
= &(header
->err_specific_desc
[strlen(header
->err_specific_desc
) + 1]);
911 /* Don't print error for Logical unit not supported during rollcall */
912 error
= le16_to_cpu(header
->status_block
.error
);
913 if ((error
!= TW_ERROR_LOGICAL_UNIT_NOT_SUPPORTED
) && (error
!= TW_ERROR_UNIT_OFFLINE
) && (error
!= TW_ERROR_INVALID_FIELD_IN_CDB
)) {
915 printk(KERN_WARNING
"3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n",
916 tw_dev
->host
->host_no
,
917 TW_MESSAGE_SOURCE_CONTROLLER_ERROR
,
918 header
->status_block
.error
,
920 header
->err_specific_desc
);
922 printk(KERN_WARNING
"3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n",
923 TW_MESSAGE_SOURCE_CONTROLLER_ERROR
,
924 header
->status_block
.error
,
926 header
->err_specific_desc
);
930 memcpy(tw_dev
->srb
[request_id
]->sense_buffer
, header
->sense_data
, TW_SENSE_DATA_LENGTH
);
931 tw_dev
->srb
[request_id
]->result
= (full_command_packet
->command
.newcommand
.status
<< 1);
936 } /* End twl_fill_sense() */
938 /* This function will free up device extension resources */
939 static void twl_free_device_extension(TW_Device_Extension
*tw_dev
)
941 if (tw_dev
->command_packet_virt
[0])
942 pci_free_consistent(tw_dev
->tw_pci_dev
,
943 sizeof(TW_Command_Full
)*TW_Q_LENGTH
,
944 tw_dev
->command_packet_virt
[0],
945 tw_dev
->command_packet_phys
[0]);
947 if (tw_dev
->generic_buffer_virt
[0])
948 pci_free_consistent(tw_dev
->tw_pci_dev
,
949 TW_SECTOR_SIZE
*TW_Q_LENGTH
,
950 tw_dev
->generic_buffer_virt
[0],
951 tw_dev
->generic_buffer_phys
[0]);
953 if (tw_dev
->sense_buffer_virt
[0])
954 pci_free_consistent(tw_dev
->tw_pci_dev
,
955 sizeof(TW_Command_Apache_Header
)*
957 tw_dev
->sense_buffer_virt
[0],
958 tw_dev
->sense_buffer_phys
[0]);
960 kfree(tw_dev
->event_queue
[0]);
961 } /* End twl_free_device_extension() */
963 /* This function will get parameter table entries from the firmware */
964 static void *twl_get_param(TW_Device_Extension
*tw_dev
, int request_id
, int table_id
, int parameter_id
, int parameter_size_bytes
)
966 TW_Command_Full
*full_command_packet
;
967 TW_Command
*command_packet
;
968 TW_Param_Apache
*param
;
971 /* Setup the command packet */
972 full_command_packet
= tw_dev
->command_packet_virt
[request_id
];
973 memset(full_command_packet
, 0, sizeof(TW_Command_Full
));
974 command_packet
= &full_command_packet
->command
.oldcommand
;
976 command_packet
->opcode__sgloffset
= TW_OPSGL_IN(2, TW_OP_GET_PARAM
);
977 command_packet
->size
= TW_COMMAND_SIZE
;
978 command_packet
->request_id
= request_id
;
979 command_packet
->byte6_offset
.block_count
= cpu_to_le16(1);
981 /* Now setup the param */
982 param
= (TW_Param_Apache
*)tw_dev
->generic_buffer_virt
[request_id
];
983 memset(param
, 0, TW_SECTOR_SIZE
);
984 param
->table_id
= cpu_to_le16(table_id
| 0x8000);
985 param
->parameter_id
= cpu_to_le16(parameter_id
);
986 param
->parameter_size_bytes
= cpu_to_le16(parameter_size_bytes
);
988 command_packet
->byte8_offset
.param
.sgl
[0].address
= TW_CPU_TO_SGL(tw_dev
->generic_buffer_phys
[request_id
]);
989 command_packet
->byte8_offset
.param
.sgl
[0].length
= TW_CPU_TO_SGL(TW_SECTOR_SIZE
);
991 /* Post the command packet to the board */
992 twl_post_command_packet(tw_dev
, request_id
);
994 /* Poll for completion */
995 if (twl_poll_response(tw_dev
, request_id
, 30))
996 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x7, "No valid response during get param")
998 retval
= (void *)&(param
->data
[0]);
1000 tw_dev
->posted_request_count
--;
1001 tw_dev
->state
[request_id
] = TW_S_INITIAL
;
1004 } /* End twl_get_param() */
1006 /* This function will send an initconnection command to controller */
1007 static int twl_initconnection(TW_Device_Extension
*tw_dev
, int message_credits
,
1008 u32 set_features
, unsigned short current_fw_srl
,
1009 unsigned short current_fw_arch_id
,
1010 unsigned short current_fw_branch
,
1011 unsigned short current_fw_build
,
1012 unsigned short *fw_on_ctlr_srl
,
1013 unsigned short *fw_on_ctlr_arch_id
,
1014 unsigned short *fw_on_ctlr_branch
,
1015 unsigned short *fw_on_ctlr_build
,
1016 u32
*init_connect_result
)
1018 TW_Command_Full
*full_command_packet
;
1019 TW_Initconnect
*tw_initconnect
;
1020 int request_id
= 0, retval
= 1;
1022 /* Initialize InitConnection command packet */
1023 full_command_packet
= tw_dev
->command_packet_virt
[request_id
];
1024 memset(full_command_packet
, 0, sizeof(TW_Command_Full
));
1025 full_command_packet
->header
.header_desc
.size_header
= 128;
1027 tw_initconnect
= (TW_Initconnect
*)&full_command_packet
->command
.oldcommand
;
1028 tw_initconnect
->opcode__reserved
= TW_OPRES_IN(0, TW_OP_INIT_CONNECTION
);
1029 tw_initconnect
->request_id
= request_id
;
1030 tw_initconnect
->message_credits
= cpu_to_le16(message_credits
);
1031 tw_initconnect
->features
= set_features
;
1033 /* Turn on 64-bit sgl support if we need to */
1034 tw_initconnect
->features
|= sizeof(dma_addr_t
) > 4 ? 1 : 0;
1036 tw_initconnect
->features
= cpu_to_le32(tw_initconnect
->features
);
1038 if (set_features
& TW_EXTENDED_INIT_CONNECT
) {
1039 tw_initconnect
->size
= TW_INIT_COMMAND_PACKET_SIZE_EXTENDED
;
1040 tw_initconnect
->fw_srl
= cpu_to_le16(current_fw_srl
);
1041 tw_initconnect
->fw_arch_id
= cpu_to_le16(current_fw_arch_id
);
1042 tw_initconnect
->fw_branch
= cpu_to_le16(current_fw_branch
);
1043 tw_initconnect
->fw_build
= cpu_to_le16(current_fw_build
);
1045 tw_initconnect
->size
= TW_INIT_COMMAND_PACKET_SIZE
;
1047 /* Send command packet to the board */
1048 twl_post_command_packet(tw_dev
, request_id
);
1050 /* Poll for completion */
1051 if (twl_poll_response(tw_dev
, request_id
, 30)) {
1052 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x8, "No valid response during init connection");
1054 if (set_features
& TW_EXTENDED_INIT_CONNECT
) {
1055 *fw_on_ctlr_srl
= le16_to_cpu(tw_initconnect
->fw_srl
);
1056 *fw_on_ctlr_arch_id
= le16_to_cpu(tw_initconnect
->fw_arch_id
);
1057 *fw_on_ctlr_branch
= le16_to_cpu(tw_initconnect
->fw_branch
);
1058 *fw_on_ctlr_build
= le16_to_cpu(tw_initconnect
->fw_build
);
1059 *init_connect_result
= le32_to_cpu(tw_initconnect
->result
);
1064 tw_dev
->posted_request_count
--;
1065 tw_dev
->state
[request_id
] = TW_S_INITIAL
;
1068 } /* End twl_initconnection() */
1070 /* This function will initialize the fields of a device extension */
1071 static int twl_initialize_device_extension(TW_Device_Extension
*tw_dev
)
1075 /* Initialize command packet buffers */
1076 if (twl_allocate_memory(tw_dev
, sizeof(TW_Command_Full
), 0)) {
1077 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x9, "Command packet memory allocation failed");
1081 /* Initialize generic buffer */
1082 if (twl_allocate_memory(tw_dev
, TW_SECTOR_SIZE
, 1)) {
1083 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0xa, "Generic memory allocation failed");
1087 /* Allocate sense buffers */
1088 if (twl_allocate_memory(tw_dev
, sizeof(TW_Command_Apache_Header
), 2)) {
1089 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0xb, "Sense buffer allocation failed");
1093 /* Allocate event info space */
1094 tw_dev
->event_queue
[0] = kcalloc(TW_Q_LENGTH
, sizeof(TW_Event
), GFP_KERNEL
);
1095 if (!tw_dev
->event_queue
[0]) {
1096 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0xc, "Event info memory allocation failed");
1100 for (i
= 0; i
< TW_Q_LENGTH
; i
++) {
1101 tw_dev
->event_queue
[i
] = (TW_Event
*)((unsigned char *)tw_dev
->event_queue
[0] + (i
* sizeof(TW_Event
)));
1102 tw_dev
->free_queue
[i
] = i
;
1103 tw_dev
->state
[i
] = TW_S_INITIAL
;
1106 tw_dev
->free_head
= TW_Q_START
;
1107 tw_dev
->free_tail
= TW_Q_START
;
1108 tw_dev
->error_sequence_id
= 1;
1109 tw_dev
->chrdev_request_id
= TW_IOCTL_CHRDEV_FREE
;
1111 mutex_init(&tw_dev
->ioctl_lock
);
1112 init_waitqueue_head(&tw_dev
->ioctl_wqueue
);
1117 } /* End twl_initialize_device_extension() */
1119 /* This function will perform a pci-dma unmap */
1120 static void twl_unmap_scsi_data(TW_Device_Extension
*tw_dev
, int request_id
)
1122 struct scsi_cmnd
*cmd
= tw_dev
->srb
[request_id
];
1124 if (cmd
->SCp
.phase
== TW_PHASE_SGLIST
)
1125 scsi_dma_unmap(cmd
);
1126 } /* End twl_unmap_scsi_data() */
1128 /* This function will handle attention interrupts */
1129 static int twl_handle_attention_interrupt(TW_Device_Extension
*tw_dev
)
1132 u32 request_id
, doorbell
;
1134 /* Read doorbell status */
1135 doorbell
= readl(TWL_HOBDB_REG_ADDR(tw_dev
));
1137 /* Check for controller errors */
1138 if (doorbell
& TWL_DOORBELL_CONTROLLER_ERROR
) {
1139 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0xd, "Microcontroller Error: clearing");
1143 /* Check if we need to perform an AEN drain */
1144 if (doorbell
& TWL_DOORBELL_ATTENTION_INTERRUPT
) {
1145 if (!(test_and_set_bit(TW_IN_ATTENTION_LOOP
, &tw_dev
->flags
))) {
1146 twl_get_request_id(tw_dev
, &request_id
);
1147 if (twl_aen_read_queue(tw_dev
, request_id
)) {
1148 tw_dev
->state
[request_id
] = TW_S_COMPLETED
;
1149 twl_free_request_id(tw_dev
, request_id
);
1150 clear_bit(TW_IN_ATTENTION_LOOP
, &tw_dev
->flags
);
1157 /* Clear doorbell interrupt */
1158 TWL_CLEAR_DB_INTERRUPT(tw_dev
);
1160 /* Make sure the clear was flushed by reading it back */
1161 readl(TWL_HOBDBC_REG_ADDR(tw_dev
));
1164 } /* End twl_handle_attention_interrupt() */
1166 /* Interrupt service routine */
1167 static irqreturn_t
twl_interrupt(int irq
, void *dev_instance
)
1169 TW_Device_Extension
*tw_dev
= (TW_Device_Extension
*)dev_instance
;
1170 int i
, handled
= 0, error
= 0;
1172 u32 reg
, regl
, regh
, response
, request_id
= 0;
1173 struct scsi_cmnd
*cmd
;
1174 TW_Command_Full
*full_command_packet
;
1176 spin_lock(tw_dev
->host
->host_lock
);
1178 /* Read host interrupt status */
1179 reg
= readl(TWL_HISTAT_REG_ADDR(tw_dev
));
1181 /* Check if this is our interrupt, otherwise bail */
1182 if (!(reg
& TWL_HISTATUS_VALID_INTERRUPT
))
1183 goto twl_interrupt_bail
;
1187 /* If we are resetting, bail */
1188 if (test_bit(TW_IN_RESET
, &tw_dev
->flags
))
1189 goto twl_interrupt_bail
;
1191 /* Attention interrupt */
1192 if (reg
& TWL_HISTATUS_ATTENTION_INTERRUPT
) {
1193 if (twl_handle_attention_interrupt(tw_dev
)) {
1194 TWL_MASK_INTERRUPTS(tw_dev
);
1195 goto twl_interrupt_bail
;
1199 /* Response interrupt */
1200 while (reg
& TWL_HISTATUS_RESPONSE_INTERRUPT
) {
1201 if (sizeof(dma_addr_t
) > 4) {
1202 regh
= readl(TWL_HOBQPH_REG_ADDR(tw_dev
));
1203 regl
= readl(TWL_HOBQPL_REG_ADDR(tw_dev
));
1204 mfa
= ((u64
)regh
<< 32) | regl
;
1206 mfa
= readl(TWL_HOBQPL_REG_ADDR(tw_dev
));
1209 response
= (u32
)mfa
;
1211 /* Check for command packet error */
1212 if (!TW_NOTMFA_OUT(response
)) {
1213 for (i
=0;i
<TW_Q_LENGTH
;i
++) {
1214 if (tw_dev
->sense_buffer_phys
[i
] == mfa
) {
1215 request_id
= le16_to_cpu(tw_dev
->sense_buffer_virt
[i
]->header_desc
.request_id
);
1216 if (tw_dev
->srb
[request_id
] != NULL
)
1217 error
= twl_fill_sense(tw_dev
, i
, request_id
, 1, 1);
1219 /* Skip ioctl error prints */
1220 if (request_id
!= tw_dev
->chrdev_request_id
)
1221 error
= twl_fill_sense(tw_dev
, i
, request_id
, 0, 1);
1223 memcpy(tw_dev
->command_packet_virt
[request_id
], tw_dev
->sense_buffer_virt
[i
], sizeof(TW_Command_Apache_Header
));
1226 /* Now re-post the sense buffer */
1227 writel((u32
)((u64
)tw_dev
->sense_buffer_phys
[i
] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev
));
1228 writel((u32
)tw_dev
->sense_buffer_phys
[i
], TWL_HOBQPL_REG_ADDR(tw_dev
));
1233 request_id
= TW_RESID_OUT(response
);
1235 full_command_packet
= tw_dev
->command_packet_virt
[request_id
];
1237 /* Check for correct state */
1238 if (tw_dev
->state
[request_id
] != TW_S_POSTED
) {
1239 if (tw_dev
->srb
[request_id
] != NULL
) {
1240 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0xe, "Received a request id that wasn't posted");
1241 TWL_MASK_INTERRUPTS(tw_dev
);
1242 goto twl_interrupt_bail
;
1246 /* Check for internal command completion */
1247 if (tw_dev
->srb
[request_id
] == NULL
) {
1248 if (request_id
!= tw_dev
->chrdev_request_id
) {
1249 if (twl_aen_complete(tw_dev
, request_id
))
1250 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0xf, "Error completing AEN during attention interrupt");
1252 tw_dev
->chrdev_request_id
= TW_IOCTL_CHRDEV_FREE
;
1253 wake_up(&tw_dev
->ioctl_wqueue
);
1256 cmd
= tw_dev
->srb
[request_id
];
1259 cmd
->result
= (DID_OK
<< 16);
1261 /* Report residual bytes for single sgl */
1262 if ((scsi_sg_count(cmd
) <= 1) && (full_command_packet
->command
.newcommand
.status
== 0)) {
1263 if (full_command_packet
->command
.newcommand
.sg_list
[0].length
< scsi_bufflen(tw_dev
->srb
[request_id
]))
1264 scsi_set_resid(cmd
, scsi_bufflen(cmd
) - full_command_packet
->command
.newcommand
.sg_list
[0].length
);
1267 /* Now complete the io */
1268 tw_dev
->state
[request_id
] = TW_S_COMPLETED
;
1269 twl_free_request_id(tw_dev
, request_id
);
1270 tw_dev
->posted_request_count
--;
1271 tw_dev
->srb
[request_id
]->scsi_done(tw_dev
->srb
[request_id
]);
1272 twl_unmap_scsi_data(tw_dev
, request_id
);
1275 /* Check for another response interrupt */
1276 reg
= readl(TWL_HISTAT_REG_ADDR(tw_dev
));
1280 spin_unlock(tw_dev
->host
->host_lock
);
1281 return IRQ_RETVAL(handled
);
1282 } /* End twl_interrupt() */
1284 /* This function will poll for a register change */
1285 static int twl_poll_register(TW_Device_Extension
*tw_dev
, void *reg
, u32 value
, u32 result
, int seconds
)
1287 unsigned long before
;
1291 reg_value
= readl(reg
);
1294 while ((reg_value
& value
) != result
) {
1295 reg_value
= readl(reg
);
1296 if (time_after(jiffies
, before
+ HZ
* seconds
))
1303 } /* End twl_poll_register() */
1305 /* This function will reset a controller */
1306 static int twl_reset_sequence(TW_Device_Extension
*tw_dev
, int soft_reset
)
1311 unsigned short fw_on_ctlr_srl
= 0, fw_on_ctlr_arch_id
= 0;
1312 unsigned short fw_on_ctlr_branch
= 0, fw_on_ctlr_build
= 0;
1313 u32 init_connect_result
= 0;
1315 int do_soft_reset
= soft_reset
;
1317 while (tries
< TW_MAX_RESET_TRIES
) {
1318 /* Do a soft reset if one is needed */
1319 if (do_soft_reset
) {
1320 TWL_SOFT_RESET(tw_dev
);
1322 /* Make sure controller is in a good state */
1323 if (twl_poll_register(tw_dev
, TWL_SCRPD3_REG_ADDR(tw_dev
), TWL_CONTROLLER_READY
, 0x0, 30)) {
1324 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x10, "Controller never went non-ready during reset sequence");
1328 if (twl_poll_register(tw_dev
, TWL_SCRPD3_REG_ADDR(tw_dev
), TWL_CONTROLLER_READY
, TWL_CONTROLLER_READY
, 60)) {
1329 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x11, "Controller not ready during reset sequence");
1336 if (twl_initconnection(tw_dev
, TW_INIT_MESSAGE_CREDITS
,
1337 TW_EXTENDED_INIT_CONNECT
, TW_CURRENT_DRIVER_SRL
,
1338 TW_9750_ARCH_ID
, TW_CURRENT_DRIVER_BRANCH
,
1339 TW_CURRENT_DRIVER_BUILD
, &fw_on_ctlr_srl
,
1340 &fw_on_ctlr_arch_id
, &fw_on_ctlr_branch
,
1341 &fw_on_ctlr_build
, &init_connect_result
)) {
1342 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x12, "Initconnection failed while checking SRL");
1348 /* Load sense buffers */
1349 while (i
< TW_Q_LENGTH
) {
1350 writel((u32
)((u64
)tw_dev
->sense_buffer_phys
[i
] >> 32), TWL_HOBQPH_REG_ADDR(tw_dev
));
1351 writel((u32
)tw_dev
->sense_buffer_phys
[i
], TWL_HOBQPL_REG_ADDR(tw_dev
));
1353 /* Check status for over-run after each write */
1354 status
= readl(TWL_STATUS_REG_ADDR(tw_dev
));
1355 if (!(status
& TWL_STATUS_OVERRUN_SUBMIT
))
1359 /* Now check status */
1360 status
= readl(TWL_STATUS_REG_ADDR(tw_dev
));
1362 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x13, "Bad controller status after loading sense buffers");
1368 /* Drain the AEN queue */
1369 if (twl_aen_drain_queue(tw_dev
, soft_reset
)) {
1370 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x14, "AEN drain failed during reset sequence");
1376 /* Load rest of compatibility struct */
1377 strncpy(tw_dev
->tw_compat_info
.driver_version
, TW_DRIVER_VERSION
, strlen(TW_DRIVER_VERSION
));
1378 tw_dev
->tw_compat_info
.driver_srl_high
= TW_CURRENT_DRIVER_SRL
;
1379 tw_dev
->tw_compat_info
.driver_branch_high
= TW_CURRENT_DRIVER_BRANCH
;
1380 tw_dev
->tw_compat_info
.driver_build_high
= TW_CURRENT_DRIVER_BUILD
;
1381 tw_dev
->tw_compat_info
.driver_srl_low
= TW_BASE_FW_SRL
;
1382 tw_dev
->tw_compat_info
.driver_branch_low
= TW_BASE_FW_BRANCH
;
1383 tw_dev
->tw_compat_info
.driver_build_low
= TW_BASE_FW_BUILD
;
1384 tw_dev
->tw_compat_info
.fw_on_ctlr_srl
= fw_on_ctlr_srl
;
1385 tw_dev
->tw_compat_info
.fw_on_ctlr_branch
= fw_on_ctlr_branch
;
1386 tw_dev
->tw_compat_info
.fw_on_ctlr_build
= fw_on_ctlr_build
;
1388 /* If we got here, controller is in a good state */
1394 } /* End twl_reset_sequence() */
1396 /* This function will reset a device extension */
1397 static int twl_reset_device_extension(TW_Device_Extension
*tw_dev
, int ioctl_reset
)
1399 int i
= 0, retval
= 1;
1400 unsigned long flags
= 0;
1402 /* Block SCSI requests while we are resetting */
1404 scsi_block_requests(tw_dev
->host
);
1406 set_bit(TW_IN_RESET
, &tw_dev
->flags
);
1407 TWL_MASK_INTERRUPTS(tw_dev
);
1408 TWL_CLEAR_DB_INTERRUPT(tw_dev
);
1410 spin_lock_irqsave(tw_dev
->host
->host_lock
, flags
);
1412 /* Abort all requests that are in progress */
1413 for (i
= 0; i
< TW_Q_LENGTH
; i
++) {
1414 if ((tw_dev
->state
[i
] != TW_S_FINISHED
) &&
1415 (tw_dev
->state
[i
] != TW_S_INITIAL
) &&
1416 (tw_dev
->state
[i
] != TW_S_COMPLETED
)) {
1417 if (tw_dev
->srb
[i
]) {
1418 tw_dev
->srb
[i
]->result
= (DID_RESET
<< 16);
1419 tw_dev
->srb
[i
]->scsi_done(tw_dev
->srb
[i
]);
1420 twl_unmap_scsi_data(tw_dev
, i
);
1425 /* Reset queues and counts */
1426 for (i
= 0; i
< TW_Q_LENGTH
; i
++) {
1427 tw_dev
->free_queue
[i
] = i
;
1428 tw_dev
->state
[i
] = TW_S_INITIAL
;
1430 tw_dev
->free_head
= TW_Q_START
;
1431 tw_dev
->free_tail
= TW_Q_START
;
1432 tw_dev
->posted_request_count
= 0;
1434 spin_unlock_irqrestore(tw_dev
->host
->host_lock
, flags
);
1436 if (twl_reset_sequence(tw_dev
, 1))
1439 TWL_UNMASK_INTERRUPTS(tw_dev
);
1441 clear_bit(TW_IN_RESET
, &tw_dev
->flags
);
1442 tw_dev
->chrdev_request_id
= TW_IOCTL_CHRDEV_FREE
;
1447 scsi_unblock_requests(tw_dev
->host
);
1449 } /* End twl_reset_device_extension() */
1451 /* This funciton returns unit geometry in cylinders/heads/sectors */
1452 static int twl_scsi_biosparam(struct scsi_device
*sdev
, struct block_device
*bdev
, sector_t capacity
, int geom
[])
1455 TW_Device_Extension
*tw_dev
;
1457 tw_dev
= (TW_Device_Extension
*)sdev
->host
->hostdata
;
1459 if (capacity
>= 0x200000) {
1469 geom
[2] = sector_div(capacity
, heads
* sectors
); /* cylinders */
1472 } /* End twl_scsi_biosparam() */
1474 /* This is the new scsi eh reset function */
1475 static int twl_scsi_eh_reset(struct scsi_cmnd
*SCpnt
)
1477 TW_Device_Extension
*tw_dev
= NULL
;
1478 int retval
= FAILED
;
1480 tw_dev
= (TW_Device_Extension
*)SCpnt
->device
->host
->hostdata
;
1482 tw_dev
->num_resets
++;
1484 sdev_printk(KERN_WARNING
, SCpnt
->device
,
1485 "WARNING: (0x%02X:0x%04X): Command (0x%x) timed out, resetting card.\n",
1486 TW_DRIVER
, 0x2c, SCpnt
->cmnd
[0]);
1488 /* Make sure we are not issuing an ioctl or resetting from ioctl */
1489 mutex_lock(&tw_dev
->ioctl_lock
);
1491 /* Now reset the card and some of the device extension data */
1492 if (twl_reset_device_extension(tw_dev
, 0)) {
1493 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x15, "Controller reset failed during scsi host reset");
1499 mutex_unlock(&tw_dev
->ioctl_lock
);
1501 } /* End twl_scsi_eh_reset() */
1503 /* This is the main scsi queue function to handle scsi opcodes */
1504 static int twl_scsi_queue_lck(struct scsi_cmnd
*SCpnt
, void (*done
)(struct scsi_cmnd
*))
1506 int request_id
, retval
;
1507 TW_Device_Extension
*tw_dev
= (TW_Device_Extension
*)SCpnt
->device
->host
->hostdata
;
1509 /* If we are resetting due to timed out ioctl, report as busy */
1510 if (test_bit(TW_IN_RESET
, &tw_dev
->flags
)) {
1511 retval
= SCSI_MLQUEUE_HOST_BUSY
;
1515 /* Save done function into scsi_cmnd struct */
1516 SCpnt
->scsi_done
= done
;
1518 /* Get a free request id */
1519 twl_get_request_id(tw_dev
, &request_id
);
1521 /* Save the scsi command for use by the ISR */
1522 tw_dev
->srb
[request_id
] = SCpnt
;
1524 /* Initialize phase to zero */
1525 SCpnt
->SCp
.phase
= TW_PHASE_INITIAL
;
1527 retval
= twl_scsiop_execute_scsi(tw_dev
, request_id
, NULL
, 0, NULL
);
1529 tw_dev
->state
[request_id
] = TW_S_COMPLETED
;
1530 twl_free_request_id(tw_dev
, request_id
);
1531 SCpnt
->result
= (DID_ERROR
<< 16);
1537 } /* End twl_scsi_queue() */
1539 static DEF_SCSI_QCMD(twl_scsi_queue
)
1541 /* This function tells the controller to shut down */
1542 static void __twl_shutdown(TW_Device_Extension
*tw_dev
)
1544 /* Disable interrupts */
1545 TWL_MASK_INTERRUPTS(tw_dev
);
1547 /* Free up the IRQ */
1548 free_irq(tw_dev
->tw_pci_dev
->irq
, tw_dev
);
1550 printk(KERN_WARNING
"3w-sas: Shutting down host %d.\n", tw_dev
->host
->host_no
);
1552 /* Tell the card we are shutting down */
1553 if (twl_initconnection(tw_dev
, 1, 0, 0, 0, 0, 0, NULL
, NULL
, NULL
, NULL
, NULL
)) {
1554 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x16, "Connection shutdown failed");
1556 printk(KERN_WARNING
"3w-sas: Shutdown complete.\n");
1559 /* Clear doorbell interrupt just before exit */
1560 TWL_CLEAR_DB_INTERRUPT(tw_dev
);
1561 } /* End __twl_shutdown() */
1563 /* Wrapper for __twl_shutdown */
1564 static void twl_shutdown(struct pci_dev
*pdev
)
1566 struct Scsi_Host
*host
= pci_get_drvdata(pdev
);
1567 TW_Device_Extension
*tw_dev
;
1572 tw_dev
= (TW_Device_Extension
*)host
->hostdata
;
1575 __twl_shutdown(tw_dev
);
1576 } /* End twl_shutdown() */
1578 /* This function configures unit settings when a unit is coming on-line */
1579 static int twl_slave_configure(struct scsi_device
*sdev
)
1581 /* Force 60 second timeout */
1582 blk_queue_rq_timeout(sdev
->request_queue
, 60 * HZ
);
1585 } /* End twl_slave_configure() */
1587 /* scsi_host_template initializer */
1588 static struct scsi_host_template driver_template
= {
1589 .module
= THIS_MODULE
,
1591 .queuecommand
= twl_scsi_queue
,
1592 .eh_host_reset_handler
= twl_scsi_eh_reset
,
1593 .bios_param
= twl_scsi_biosparam
,
1594 .change_queue_depth
= twl_change_queue_depth
,
1595 .can_queue
= TW_Q_LENGTH
-2,
1596 .slave_configure
= twl_slave_configure
,
1598 .sg_tablesize
= TW_LIBERATOR_MAX_SGL_LENGTH
,
1599 .max_sectors
= TW_MAX_SECTORS
,
1600 .cmd_per_lun
= TW_MAX_CMDS_PER_LUN
,
1601 .use_clustering
= ENABLE_CLUSTERING
,
1602 .shost_attrs
= twl_host_attrs
,
1607 /* This function will probe and initialize a card */
1608 static int twl_probe(struct pci_dev
*pdev
, const struct pci_device_id
*dev_id
)
1610 struct Scsi_Host
*host
= NULL
;
1611 TW_Device_Extension
*tw_dev
;
1612 int retval
= -ENODEV
;
1613 int *ptr_phycount
, phycount
=0;
1615 retval
= pci_enable_device(pdev
);
1617 TW_PRINTK(host
, TW_DRIVER
, 0x17, "Failed to enable pci device");
1618 goto out_disable_device
;
1621 pci_set_master(pdev
);
1622 pci_try_set_mwi(pdev
);
1624 if (pci_set_dma_mask(pdev
, DMA_BIT_MASK(64))
1625 || pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(64)))
1626 if (pci_set_dma_mask(pdev
, DMA_BIT_MASK(32))
1627 || pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32))) {
1628 TW_PRINTK(host
, TW_DRIVER
, 0x18, "Failed to set dma mask");
1630 goto out_disable_device
;
1633 host
= scsi_host_alloc(&driver_template
, sizeof(TW_Device_Extension
));
1635 TW_PRINTK(host
, TW_DRIVER
, 0x19, "Failed to allocate memory for device extension");
1637 goto out_disable_device
;
1639 tw_dev
= shost_priv(host
);
1641 /* Save values to device extension */
1642 tw_dev
->host
= host
;
1643 tw_dev
->tw_pci_dev
= pdev
;
1645 if (twl_initialize_device_extension(tw_dev
)) {
1646 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x1a, "Failed to initialize device extension");
1647 goto out_free_device_extension
;
1650 /* Request IO regions */
1651 retval
= pci_request_regions(pdev
, "3w-sas");
1653 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x1b, "Failed to get mem region");
1654 goto out_free_device_extension
;
1657 /* Save base address, use region 1 */
1658 tw_dev
->base_addr
= pci_iomap(pdev
, 1, 0);
1659 if (!tw_dev
->base_addr
) {
1660 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x1c, "Failed to ioremap");
1661 goto out_release_mem_region
;
1664 /* Disable interrupts on the card */
1665 TWL_MASK_INTERRUPTS(tw_dev
);
1667 /* Initialize the card */
1668 if (twl_reset_sequence(tw_dev
, 0)) {
1669 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x1d, "Controller reset failed during probe");
1673 /* Set host specific parameters */
1674 host
->max_id
= TW_MAX_UNITS
;
1675 host
->max_cmd_len
= TW_MAX_CDB_LEN
;
1676 host
->max_lun
= TW_MAX_LUNS
;
1677 host
->max_channel
= 0;
1679 /* Register the card with the kernel SCSI layer */
1680 retval
= scsi_add_host(host
, &pdev
->dev
);
1682 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x1e, "scsi add host failed");
1686 pci_set_drvdata(pdev
, host
);
1688 printk(KERN_WARNING
"3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n",
1690 (char *)twl_get_param(tw_dev
, 1, TW_VERSION_TABLE
,
1691 TW_PARAM_MODEL
, TW_PARAM_MODEL_LENGTH
),
1692 (u64
)pci_resource_start(pdev
, 1), pdev
->irq
);
1694 ptr_phycount
= twl_get_param(tw_dev
, 2, TW_PARAM_PHY_SUMMARY_TABLE
,
1695 TW_PARAM_PHYCOUNT
, TW_PARAM_PHYCOUNT_LENGTH
);
1697 phycount
= le32_to_cpu(*(int *)ptr_phycount
);
1699 printk(KERN_WARNING
"3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n",
1701 (char *)twl_get_param(tw_dev
, 1, TW_VERSION_TABLE
,
1702 TW_PARAM_FWVER
, TW_PARAM_FWVER_LENGTH
),
1703 (char *)twl_get_param(tw_dev
, 2, TW_VERSION_TABLE
,
1704 TW_PARAM_BIOSVER
, TW_PARAM_BIOSVER_LENGTH
),
1707 /* Try to enable MSI */
1708 if (use_msi
&& !pci_enable_msi(pdev
))
1709 set_bit(TW_USING_MSI
, &tw_dev
->flags
);
1711 /* Now setup the interrupt handler */
1712 retval
= request_irq(pdev
->irq
, twl_interrupt
, IRQF_SHARED
, "3w-sas", tw_dev
);
1714 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x1f, "Error requesting IRQ");
1715 goto out_remove_host
;
1718 twl_device_extension_list
[twl_device_extension_count
] = tw_dev
;
1719 twl_device_extension_count
++;
1721 /* Re-enable interrupts on the card */
1722 TWL_UNMASK_INTERRUPTS(tw_dev
);
1724 /* Finally, scan the host */
1725 scsi_scan_host(host
);
1727 /* Add sysfs binary files */
1728 if (sysfs_create_bin_file(&host
->shost_dev
.kobj
, &twl_sysfs_aen_read_attr
))
1729 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x20, "Failed to create sysfs binary file: 3ware_aen_read");
1730 if (sysfs_create_bin_file(&host
->shost_dev
.kobj
, &twl_sysfs_compat_info_attr
))
1731 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x21, "Failed to create sysfs binary file: 3ware_compat_info");
1733 if (twl_major
== -1) {
1734 if ((twl_major
= register_chrdev (0, "twl", &twl_fops
)) < 0)
1735 TW_PRINTK(host
, TW_DRIVER
, 0x22, "Failed to register character device");
1741 if (test_bit(TW_USING_MSI
, &tw_dev
->flags
))
1742 pci_disable_msi(pdev
);
1743 scsi_remove_host(host
);
1745 iounmap(tw_dev
->base_addr
);
1746 out_release_mem_region
:
1747 pci_release_regions(pdev
);
1748 out_free_device_extension
:
1749 twl_free_device_extension(tw_dev
);
1750 scsi_host_put(host
);
1752 pci_disable_device(pdev
);
1755 } /* End twl_probe() */
1757 /* This function is called to remove a device */
1758 static void twl_remove(struct pci_dev
*pdev
)
1760 struct Scsi_Host
*host
= pci_get_drvdata(pdev
);
1761 TW_Device_Extension
*tw_dev
;
1766 tw_dev
= (TW_Device_Extension
*)host
->hostdata
;
1768 if (!tw_dev
->online
)
1771 /* Remove sysfs binary files */
1772 sysfs_remove_bin_file(&host
->shost_dev
.kobj
, &twl_sysfs_aen_read_attr
);
1773 sysfs_remove_bin_file(&host
->shost_dev
.kobj
, &twl_sysfs_compat_info_attr
);
1775 scsi_remove_host(tw_dev
->host
);
1777 /* Unregister character device */
1778 if (twl_major
>= 0) {
1779 unregister_chrdev(twl_major
, "twl");
1783 /* Shutdown the card */
1784 __twl_shutdown(tw_dev
);
1786 /* Disable MSI if enabled */
1787 if (test_bit(TW_USING_MSI
, &tw_dev
->flags
))
1788 pci_disable_msi(pdev
);
1790 /* Free IO remapping */
1791 iounmap(tw_dev
->base_addr
);
1793 /* Free up the mem region */
1794 pci_release_regions(pdev
);
1796 /* Free up device extension resources */
1797 twl_free_device_extension(tw_dev
);
1799 scsi_host_put(tw_dev
->host
);
1800 pci_disable_device(pdev
);
1801 twl_device_extension_count
--;
1802 } /* End twl_remove() */
1805 /* This function is called on PCI suspend */
1806 static int twl_suspend(struct pci_dev
*pdev
, pm_message_t state
)
1808 struct Scsi_Host
*host
= pci_get_drvdata(pdev
);
1809 TW_Device_Extension
*tw_dev
= (TW_Device_Extension
*)host
->hostdata
;
1811 printk(KERN_WARNING
"3w-sas: Suspending host %d.\n", tw_dev
->host
->host_no
);
1812 /* Disable interrupts */
1813 TWL_MASK_INTERRUPTS(tw_dev
);
1815 free_irq(tw_dev
->tw_pci_dev
->irq
, tw_dev
);
1817 /* Tell the card we are shutting down */
1818 if (twl_initconnection(tw_dev
, 1, 0, 0, 0, 0, 0, NULL
, NULL
, NULL
, NULL
, NULL
)) {
1819 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x23, "Connection shutdown failed during suspend");
1821 printk(KERN_WARNING
"3w-sas: Suspend complete.\n");
1824 /* Clear doorbell interrupt */
1825 TWL_CLEAR_DB_INTERRUPT(tw_dev
);
1827 pci_save_state(pdev
);
1828 pci_disable_device(pdev
);
1829 pci_set_power_state(pdev
, pci_choose_state(pdev
, state
));
1832 } /* End twl_suspend() */
1834 /* This function is called on PCI resume */
1835 static int twl_resume(struct pci_dev
*pdev
)
1838 struct Scsi_Host
*host
= pci_get_drvdata(pdev
);
1839 TW_Device_Extension
*tw_dev
= (TW_Device_Extension
*)host
->hostdata
;
1841 printk(KERN_WARNING
"3w-sas: Resuming host %d.\n", tw_dev
->host
->host_no
);
1842 pci_set_power_state(pdev
, PCI_D0
);
1843 pci_enable_wake(pdev
, PCI_D0
, 0);
1844 pci_restore_state(pdev
);
1846 retval
= pci_enable_device(pdev
);
1848 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x24, "Enable device failed during resume");
1852 pci_set_master(pdev
);
1853 pci_try_set_mwi(pdev
);
1855 if (pci_set_dma_mask(pdev
, DMA_BIT_MASK(64))
1856 || pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(64)))
1857 if (pci_set_dma_mask(pdev
, DMA_BIT_MASK(32))
1858 || pci_set_consistent_dma_mask(pdev
, DMA_BIT_MASK(32))) {
1859 TW_PRINTK(host
, TW_DRIVER
, 0x25, "Failed to set dma mask during resume");
1861 goto out_disable_device
;
1864 /* Initialize the card */
1865 if (twl_reset_sequence(tw_dev
, 0)) {
1867 goto out_disable_device
;
1870 /* Now setup the interrupt handler */
1871 retval
= request_irq(pdev
->irq
, twl_interrupt
, IRQF_SHARED
, "3w-sas", tw_dev
);
1873 TW_PRINTK(tw_dev
->host
, TW_DRIVER
, 0x26, "Error requesting IRQ during resume");
1875 goto out_disable_device
;
1878 /* Now enable MSI if enabled */
1879 if (test_bit(TW_USING_MSI
, &tw_dev
->flags
))
1880 pci_enable_msi(pdev
);
1882 /* Re-enable interrupts on the card */
1883 TWL_UNMASK_INTERRUPTS(tw_dev
);
1885 printk(KERN_WARNING
"3w-sas: Resume complete.\n");
1889 scsi_remove_host(host
);
1890 pci_disable_device(pdev
);
1893 } /* End twl_resume() */
1896 /* PCI Devices supported by this driver */
1897 static struct pci_device_id twl_pci_tbl
[] = {
1898 { PCI_VDEVICE(3WARE
, PCI_DEVICE_ID_3WARE_9750
) },
1901 MODULE_DEVICE_TABLE(pci
, twl_pci_tbl
);
1903 /* pci_driver initializer */
1904 static struct pci_driver twl_driver
= {
1906 .id_table
= twl_pci_tbl
,
1908 .remove
= twl_remove
,
1910 .suspend
= twl_suspend
,
1911 .resume
= twl_resume
,
1913 .shutdown
= twl_shutdown
1916 /* This function is called on driver initialization */
1917 static int __init
twl_init(void)
1919 printk(KERN_INFO
"LSI 3ware SAS/SATA-RAID Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION
);
1921 return pci_register_driver(&twl_driver
);
1922 } /* End twl_init() */
1924 /* This function is called on driver exit */
1925 static void __exit
twl_exit(void)
1927 pci_unregister_driver(&twl_driver
);
1928 } /* End twl_exit() */
1930 module_init(twl_init
);
1931 module_exit(twl_exit
);