x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / alpha / kernel / sys_cabriolet.c
blob4c50f8f40cbbfe73c39ffd0062d1937dd892b9a6
1 /*
2 * linux/arch/alpha/kernel/sys_cabriolet.c
4 * Copyright (C) 1995 David A Rusling
5 * Copyright (C) 1996 Jay A Estabrook
6 * Copyright (C) 1998, 1999, 2000 Richard Henderson
8 * Code supporting the Cabriolet (AlphaPC64), EB66+, and EB164,
9 * PC164 and LX164.
12 #include <linux/kernel.h>
13 #include <linux/types.h>
14 #include <linux/mm.h>
15 #include <linux/sched.h>
16 #include <linux/pci.h>
17 #include <linux/init.h>
18 #include <linux/bitops.h>
20 #include <asm/ptrace.h>
21 #include <asm/dma.h>
22 #include <asm/irq.h>
23 #include <asm/mmu_context.h>
24 #include <asm/io.h>
25 #include <asm/pgtable.h>
26 #include <asm/core_apecs.h>
27 #include <asm/core_cia.h>
28 #include <asm/core_lca.h>
29 #include <asm/tlbflush.h>
31 #include "proto.h"
32 #include "irq_impl.h"
33 #include "pci_impl.h"
34 #include "machvec_impl.h"
35 #include "pc873xx.h"
37 /* Note mask bit is true for DISABLED irqs. */
38 static unsigned long cached_irq_mask = ~0UL;
40 static inline void
41 cabriolet_update_irq_hw(unsigned int irq, unsigned long mask)
43 int ofs = (irq - 16) / 8;
44 outb(mask >> (16 + ofs * 8), 0x804 + ofs);
47 static inline void
48 cabriolet_enable_irq(struct irq_data *d)
50 cabriolet_update_irq_hw(d->irq, cached_irq_mask &= ~(1UL << d->irq));
53 static void
54 cabriolet_disable_irq(struct irq_data *d)
56 cabriolet_update_irq_hw(d->irq, cached_irq_mask |= 1UL << d->irq);
59 static struct irq_chip cabriolet_irq_type = {
60 .name = "CABRIOLET",
61 .irq_unmask = cabriolet_enable_irq,
62 .irq_mask = cabriolet_disable_irq,
63 .irq_mask_ack = cabriolet_disable_irq,
66 static void
67 cabriolet_device_interrupt(unsigned long v)
69 unsigned long pld;
70 unsigned int i;
72 /* Read the interrupt summary registers */
73 pld = inb(0x804) | (inb(0x805) << 8) | (inb(0x806) << 16);
76 * Now for every possible bit set, work through them and call
77 * the appropriate interrupt handler.
79 while (pld) {
80 i = ffz(~pld);
81 pld &= pld - 1; /* clear least bit set */
82 if (i == 4) {
83 isa_device_interrupt(v);
84 } else {
85 handle_irq(16 + i);
90 static void __init
91 common_init_irq(void (*srm_dev_int)(unsigned long v))
93 init_i8259a_irqs();
95 if (alpha_using_srm) {
96 alpha_mv.device_interrupt = srm_dev_int;
97 init_srm_irqs(35, 0);
99 else {
100 long i;
102 outb(0xff, 0x804);
103 outb(0xff, 0x805);
104 outb(0xff, 0x806);
106 for (i = 16; i < 35; ++i) {
107 irq_set_chip_and_handler(i, &cabriolet_irq_type,
108 handle_level_irq);
109 irq_set_status_flags(i, IRQ_LEVEL);
113 common_init_isa_dma();
114 setup_irq(16+4, &isa_cascade_irqaction);
117 #ifndef CONFIG_ALPHA_PC164
118 static void __init
119 cabriolet_init_irq(void)
121 common_init_irq(srm_device_interrupt);
123 #endif
125 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164)
126 /* In theory, the PC164 has the same interrupt hardware as the other
127 Cabriolet based systems. However, something got screwed up late
128 in the development cycle which broke the interrupt masking hardware.
129 Repeat, it is not possible to mask and ack interrupts. At all.
131 In an attempt to work around this, while processing interrupts,
132 we do not allow the IPL to drop below what it is currently. This
133 prevents the possibility of recursion.
135 ??? Another option might be to force all PCI devices to use edge
136 triggered rather than level triggered interrupts. That might be
137 too invasive though. */
139 static void
140 pc164_srm_device_interrupt(unsigned long v)
142 __min_ipl = getipl();
143 srm_device_interrupt(v);
144 __min_ipl = 0;
147 static void
148 pc164_device_interrupt(unsigned long v)
150 __min_ipl = getipl();
151 cabriolet_device_interrupt(v);
152 __min_ipl = 0;
155 static void __init
156 pc164_init_irq(void)
158 common_init_irq(pc164_srm_device_interrupt);
160 #endif
163 * The EB66+ is very similar to the EB66 except that it does not have
164 * the on-board NCR and Tulip chips. In the code below, I have used
165 * slot number to refer to the id select line and *not* the slot
166 * number used in the EB66+ documentation. However, in the table,
167 * I've given the slot number, the id select line and the Jxx number
168 * that's printed on the board. The interrupt pins from the PCI slots
169 * are wired into 3 interrupt summary registers at 0x804, 0x805 and
170 * 0x806 ISA.
172 * In the table, -1 means don't assign an IRQ number. This is usually
173 * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
176 static inline int __init
177 eb66p_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
179 static char irq_tab[5][5] __initdata = {
180 /*INT INTA INTB INTC INTD */
181 {16+0, 16+0, 16+5, 16+9, 16+13}, /* IdSel 6, slot 0, J25 */
182 {16+1, 16+1, 16+6, 16+10, 16+14}, /* IdSel 7, slot 1, J26 */
183 { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */
184 {16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 9, slot 2, J27 */
185 {16+3, 16+3, 16+8, 16+12, 16+6} /* IdSel 10, slot 3, J28 */
187 const long min_idsel = 6, max_idsel = 10, irqs_per_slot = 5;
188 return COMMON_TABLE_LOOKUP;
193 * The AlphaPC64 is very similar to the EB66+ except that its slots
194 * are numbered differently. In the code below, I have used slot
195 * number to refer to the id select line and *not* the slot number
196 * used in the AlphaPC64 documentation. However, in the table, I've
197 * given the slot number, the id select line and the Jxx number that's
198 * printed on the board. The interrupt pins from the PCI slots are
199 * wired into 3 interrupt summary registers at 0x804, 0x805 and 0x806
200 * ISA.
202 * In the table, -1 means don't assign an IRQ number. This is usually
203 * because it is the Saturn IO (SIO) PCI/ISA Bridge Chip.
206 static inline int __init
207 cabriolet_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
209 static char irq_tab[5][5] __initdata = {
210 /*INT INTA INTB INTC INTD */
211 { 16+2, 16+2, 16+7, 16+11, 16+15}, /* IdSel 5, slot 2, J21 */
212 { 16+0, 16+0, 16+5, 16+9, 16+13}, /* IdSel 6, slot 0, J19 */
213 { 16+1, 16+1, 16+6, 16+10, 16+14}, /* IdSel 7, slot 1, J20 */
214 { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */
215 { 16+3, 16+3, 16+8, 16+12, 16+16} /* IdSel 9, slot 3, J22 */
217 const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
218 return COMMON_TABLE_LOOKUP;
221 static inline void __init
222 cabriolet_enable_ide(void)
224 if (pc873xx_probe() == -1) {
225 printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
226 } else {
227 printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
228 pc873xx_get_model(), pc873xx_get_base());
230 pc873xx_enable_ide();
234 static inline void __init
235 cabriolet_init_pci(void)
237 common_init_pci();
238 cabriolet_enable_ide();
241 static inline void __init
242 cia_cab_init_pci(void)
244 cia_init_pci();
245 cabriolet_enable_ide();
249 * The PC164 and LX164 have 19 PCI interrupts, four from each of the four
250 * PCI slots, the SIO, PCI/IDE, and USB.
252 * Each of the interrupts can be individually masked. This is
253 * accomplished by setting the appropriate bit in the mask register.
254 * A bit is set by writing a "1" to the desired position in the mask
255 * register and cleared by writing a "0". There are 3 mask registers
256 * located at ISA address 804h, 805h and 806h.
258 * An I/O read at ISA address 804h, 805h, 806h will return the
259 * state of the 11 PCI interrupts and not the state of the MASKED
260 * interrupts.
262 * Note: A write to I/O 804h, 805h, and 806h the mask register will be
263 * updated.
266 * ISA DATA<7:0>
267 * ISA +--------------------------------------------------------------+
268 * ADDRESS | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
269 * +==============================================================+
270 * 0x804 | INTB0 | USB | IDE | SIO | INTA3 |INTA2 | INTA1 | INTA0 |
271 * +--------------------------------------------------------------+
272 * 0x805 | INTD0 | INTC3 | INTC2 | INTC1 | INTC0 |INTB3 | INTB2 | INTB1 |
273 * +--------------------------------------------------------------+
274 * 0x806 | Rsrv | Rsrv | Rsrv | Rsrv | Rsrv |INTD3 | INTD2 | INTD1 |
275 * +--------------------------------------------------------------+
276 * * Rsrv = reserved bits
277 * Note: The mask register is write-only.
279 * IdSel
280 * 5 32 bit PCI option slot 2
281 * 6 64 bit PCI option slot 0
282 * 7 64 bit PCI option slot 1
283 * 8 Saturn I/O
284 * 9 32 bit PCI option slot 3
285 * 10 USB
286 * 11 IDE
290 static inline int __init
291 alphapc164_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
293 static char irq_tab[7][5] __initdata = {
294 /*INT INTA INTB INTC INTD */
295 { 16+2, 16+2, 16+9, 16+13, 16+17}, /* IdSel 5, slot 2, J20 */
296 { 16+0, 16+0, 16+7, 16+11, 16+15}, /* IdSel 6, slot 0, J29 */
297 { 16+1, 16+1, 16+8, 16+12, 16+16}, /* IdSel 7, slot 1, J26 */
298 { -1, -1, -1, -1, -1}, /* IdSel 8, SIO */
299 { 16+3, 16+3, 16+10, 16+14, 16+18}, /* IdSel 9, slot 3, J19 */
300 { 16+6, 16+6, 16+6, 16+6, 16+6}, /* IdSel 10, USB */
301 { 16+5, 16+5, 16+5, 16+5, 16+5} /* IdSel 11, IDE */
303 const long min_idsel = 5, max_idsel = 11, irqs_per_slot = 5;
304 return COMMON_TABLE_LOOKUP;
307 static inline void __init
308 alphapc164_init_pci(void)
310 cia_init_pci();
311 SMC93x_Init();
316 * The System Vector
319 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_CABRIOLET)
320 struct alpha_machine_vector cabriolet_mv __initmv = {
321 .vector_name = "Cabriolet",
322 DO_EV4_MMU,
323 DO_DEFAULT_RTC,
324 DO_APECS_IO,
325 .machine_check = apecs_machine_check,
326 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
327 .min_io_address = DEFAULT_IO_BASE,
328 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
330 .nr_irqs = 35,
331 .device_interrupt = cabriolet_device_interrupt,
333 .init_arch = apecs_init_arch,
334 .init_irq = cabriolet_init_irq,
335 .init_rtc = common_init_rtc,
336 .init_pci = cabriolet_init_pci,
337 .pci_map_irq = cabriolet_map_irq,
338 .pci_swizzle = common_swizzle,
340 #ifndef CONFIG_ALPHA_EB64P
341 ALIAS_MV(cabriolet)
342 #endif
343 #endif
345 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB164)
346 struct alpha_machine_vector eb164_mv __initmv = {
347 .vector_name = "EB164",
348 DO_EV5_MMU,
349 DO_DEFAULT_RTC,
350 DO_CIA_IO,
351 .machine_check = cia_machine_check,
352 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
353 .min_io_address = DEFAULT_IO_BASE,
354 .min_mem_address = CIA_DEFAULT_MEM_BASE,
356 .nr_irqs = 35,
357 .device_interrupt = cabriolet_device_interrupt,
359 .init_arch = cia_init_arch,
360 .init_irq = cabriolet_init_irq,
361 .init_rtc = common_init_rtc,
362 .init_pci = cia_cab_init_pci,
363 .kill_arch = cia_kill_arch,
364 .pci_map_irq = cabriolet_map_irq,
365 .pci_swizzle = common_swizzle,
367 ALIAS_MV(eb164)
368 #endif
370 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_EB66P)
371 struct alpha_machine_vector eb66p_mv __initmv = {
372 .vector_name = "EB66+",
373 DO_EV4_MMU,
374 DO_DEFAULT_RTC,
375 DO_LCA_IO,
376 .machine_check = lca_machine_check,
377 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
378 .min_io_address = DEFAULT_IO_BASE,
379 .min_mem_address = APECS_AND_LCA_DEFAULT_MEM_BASE,
381 .nr_irqs = 35,
382 .device_interrupt = cabriolet_device_interrupt,
384 .init_arch = lca_init_arch,
385 .init_irq = cabriolet_init_irq,
386 .init_rtc = common_init_rtc,
387 .init_pci = cabriolet_init_pci,
388 .pci_map_irq = eb66p_map_irq,
389 .pci_swizzle = common_swizzle,
391 ALIAS_MV(eb66p)
392 #endif
394 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_LX164)
395 struct alpha_machine_vector lx164_mv __initmv = {
396 .vector_name = "LX164",
397 DO_EV5_MMU,
398 DO_DEFAULT_RTC,
399 DO_PYXIS_IO,
400 .machine_check = cia_machine_check,
401 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
402 .min_io_address = DEFAULT_IO_BASE,
403 .min_mem_address = DEFAULT_MEM_BASE,
404 .pci_dac_offset = PYXIS_DAC_OFFSET,
406 .nr_irqs = 35,
407 .device_interrupt = cabriolet_device_interrupt,
409 .init_arch = pyxis_init_arch,
410 .init_irq = cabriolet_init_irq,
411 .init_rtc = common_init_rtc,
412 .init_pci = alphapc164_init_pci,
413 .kill_arch = cia_kill_arch,
414 .pci_map_irq = alphapc164_map_irq,
415 .pci_swizzle = common_swizzle,
417 ALIAS_MV(lx164)
418 #endif
420 #if defined(CONFIG_ALPHA_GENERIC) || defined(CONFIG_ALPHA_PC164)
421 struct alpha_machine_vector pc164_mv __initmv = {
422 .vector_name = "PC164",
423 DO_EV5_MMU,
424 DO_DEFAULT_RTC,
425 DO_CIA_IO,
426 .machine_check = cia_machine_check,
427 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
428 .min_io_address = DEFAULT_IO_BASE,
429 .min_mem_address = CIA_DEFAULT_MEM_BASE,
431 .nr_irqs = 35,
432 .device_interrupt = pc164_device_interrupt,
434 .init_arch = cia_init_arch,
435 .init_irq = pc164_init_irq,
436 .init_rtc = common_init_rtc,
437 .init_pci = alphapc164_init_pci,
438 .kill_arch = cia_kill_arch,
439 .pci_map_irq = alphapc164_map_irq,
440 .pci_swizzle = common_swizzle,
442 ALIAS_MV(pc164)
443 #endif