arch/arm/boot/dts/kirkwood-dns325.dts

   1 /dts-v1/;
   2
   3 #include "kirkwood-dnskw.dtsi"
   4
   5 / {
   6         model = "D-Link DNS-325 NAS (Rev A1)";
   7         compatible = "dlink,dns-325-a1", "dlink,dns-325", "dlink,dns-kirkwood", "marvell,kirkwood-88f6281", "marvell,kirkwood";
   8
   9         memory {
  10                 device_type = "memory";
  11                 reg = <0x00000000 0x10000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,115200n8 earlyprintk";
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20                 pinctrl-0 = <&pmx_led_power &pmx_led_red_usb_325
  21                              &pmx_led_red_left_hdd &pmx_led_red_right_hdd
  22                              &pmx_led_white_usb>;
  23                 pinctrl-names = "default";
  24
  25                 white-power {
  26                         label = "dns325:white:power";
  27                         gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */
  28                         linux,default-trigger = "default-on";
  29                 };
  30                 white-usb {
  31                         label = "dns325:white:usb";
  32                         gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */
  33                 };
  34                 red-l_hdd {
  35                         label = "dns325:red:l_hdd";
  36                         gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */
  37                 };
  38                 red-r_hdd {
  39                         label = "dns325:red:r_hdd";
  40                         gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */
  41                 };
  42                 red-usb {
  43                         label = "dns325:red:usb";
  44                         gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */
  45                 };
  46         };
  47
  48         ocp@f1000000 {
  49                 i2c@11000 {
  50                         status = "okay";
  51
  52                         lm75: lm75@48 {
  53                                 compatible = "national,lm75";
  54                                 reg = <0x48>;
  55                         };
  56                 };
  57                 serial@12000 {
  58                         status = "okay";
  59                 };
  60         };
  61 };