x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / arm / mach-at91 / pm.h
blob2f5908f0b8c5ec6dc9481f85bcba758d98f00d88
1 /*
2 * AT91 Power Management
4 * Copyright (C) 2005 David Brownell
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 #ifndef __ARCH_ARM_MACH_AT91_PM
12 #define __ARCH_ARM_MACH_AT91_PM
14 #include <mach/at91_ramc.h>
15 #include <mach/at91rm9200_sdramc.h>
18 * The AT91RM9200 goes into self-refresh mode with this command, and will
19 * terminate self-refresh automatically on the next SDRAM access.
21 * Self-refresh mode is exited as soon as a memory access is made, but we don't
22 * know for sure when that happens. However, we need to restore the low-power
23 * mode if it was enabled before going idle. Restoring low-power mode while
24 * still in self-refresh is "not recommended", but seems to work.
27 static inline void at91rm9200_standby(void)
29 u32 lpr = at91_ramc_read(0, AT91RM9200_SDRAMC_LPR);
31 asm volatile(
32 "b 1f\n\t"
33 ".align 5\n\t"
34 "1: mcr p15, 0, %0, c7, c10, 4\n\t"
35 " str %0, [%1, %2]\n\t"
36 " str %3, [%1, %4]\n\t"
37 " mcr p15, 0, %0, c7, c0, 4\n\t"
38 " str %5, [%1, %2]"
40 : "r" (0), "r" (AT91_BASE_SYS), "r" (AT91RM9200_SDRAMC_LPR),
41 "r" (1), "r" (AT91RM9200_SDRAMC_SRR),
42 "r" (lpr));
45 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
46 * remember.
48 static inline void at91sam9g45_standby(void)
50 /* Those two values allow us to delay self-refresh activation
51 * to the maximum. */
52 u32 lpr0, lpr1;
53 u32 saved_lpr0, saved_lpr1;
55 saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
56 lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
57 lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
59 saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
60 lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
61 lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
63 /* self-refresh mode now */
64 at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
65 at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
67 cpu_do_idle();
69 at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
70 at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
73 /* We manage both DDRAM/SDRAM controllers, we need more than one value to
74 * remember.
76 static inline void at91sam9263_standby(void)
78 u32 lpr0, lpr1;
79 u32 saved_lpr0, saved_lpr1;
81 saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
82 lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
83 lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
85 saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
86 lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
87 lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
89 /* self-refresh mode now */
90 at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
91 at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
93 cpu_do_idle();
95 at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
96 at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
99 static inline void at91sam9_standby(void)
101 u32 saved_lpr, lpr;
103 saved_lpr = at91_ramc_read(0, AT91_SDRAMC_LPR);
105 lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
106 at91_ramc_write(0, AT91_SDRAMC_LPR, lpr |
107 AT91_SDRAMC_LPCB_SELF_REFRESH);
109 cpu_do_idle();
111 at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr);
114 #endif