x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / arm / mach-imx / headsmp.S
blob627f16f0e9d1d393d48527e50f25c5e22c81987d
1 /*
2  * Copyright 2011 Freescale Semiconductor, Inc.
3  * Copyright 2011 Linaro Ltd.
4  *
5  * The code contained herein is licensed under the GNU General Public
6  * License. You may obtain a copy of the GNU General Public License
7  * Version 2 or later at the following locations:
8  *
9  * http://www.opensource.org/licenses/gpl-license.html
10  * http://www.gnu.org/copyleft/gpl.html
11  */
13 #include <linux/linkage.h>
14 #include <linux/init.h>
15 #include <asm/asm-offsets.h>
16 #include <asm/hardware/cache-l2x0.h>
18         .section ".text.head", "ax"
20 #ifdef CONFIG_SMP
21 diag_reg_offset:
22         .word   g_diag_reg - .
24         .macro  set_diag_reg
25         adr     r0, diag_reg_offset
26         ldr     r1, [r0]
27         add     r1, r1, r0              @ r1 = physical &g_diag_reg
28         ldr     r0, [r1]
29         mcr     p15, 0, r0, c15, c0, 1  @ write diagnostic register
30         .endm
32 ENTRY(v7_secondary_startup)
33         bl      v7_invalidate_l1
34         set_diag_reg
35         b       secondary_startup
36 ENDPROC(v7_secondary_startup)
37 #endif
39 #ifdef CONFIG_ARM_CPU_SUSPEND
41  * The following code must assume it is running from physical address
42  * where absolute virtual addresses to the data section have to be
43  * turned into relative ones.
44  */
46 #ifdef CONFIG_CACHE_L2X0
47         .macro  pl310_resume
48         adr     r0, l2x0_saved_regs_offset
49         ldr     r2, [r0]
50         add     r2, r2, r0
51         ldr     r0, [r2, #L2X0_R_PHY_BASE]      @ get physical base of l2x0
52         ldr     r1, [r2, #L2X0_R_AUX_CTRL]      @ get aux_ctrl value
53         str     r1, [r0, #L2X0_AUX_CTRL]        @ restore aux_ctrl
54         mov     r1, #0x1
55         str     r1, [r0, #L2X0_CTRL]            @ re-enable L2
56         .endm
58 l2x0_saved_regs_offset:
59         .word   l2x0_saved_regs - .
61 #else
62         .macro  pl310_resume
63         .endm
64 #endif
66 ENTRY(v7_cpu_resume)
67         bl      v7_invalidate_l1
68         pl310_resume
69         b       cpu_resume
70 ENDPROC(v7_cpu_resume)
71 #endif