1 # Copyright 2008 Openmoko, Inc.
2 # Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
6 # temporary until we can eliminate all drivers using it.
9 depends on ARCH_S3C64XX
11 select PM_GENERIC_DOMAINS
12 select SAMSUNG_WAKEMASK
14 Base platform code for any Samsung S3C64XX device
17 # Configuration options for the S3C6410 CPU
22 Enable S3C6400 CPU support
27 Enable S3C6410 CPU support
33 config S3C64XX_SETUP_SDHCI
35 select S3C64XX_SETUP_SDHCI_GPIO
37 Internal configuration for default SDHCI setup for S3C6400 and
40 config S3C64XX_DEV_ONENAND1
43 Compile in platform device definition for OneNAND1 controller
45 # platform specific device setup
47 config S3C64XX_SETUP_I2C0
51 Common setup code for i2c bus 0.
53 Note, currently since i2c0 is always compiled, this setup helper
54 is always compiled with it.
56 config S3C64XX_SETUP_I2C1
59 Common setup code for i2c bus 1.
61 config S3C64XX_SETUP_IDE
64 Common setup code for S3C64XX IDE.
66 config S3C64XX_SETUP_FB_24BPP
69 Common setup code for S3C64XX with an 24bpp RGB display helper.
71 config S3C64XX_SETUP_KEYPAD
74 Common setup code for S3C64XX KEYPAD GPIO configurations
76 config S3C64XX_SETUP_SDHCI_GPIO
79 Common setup code for S3C64XX SDHCI GPIO configurations
81 config S3C64XX_SETUP_SPI
84 Common setup code for SPI GPIO configurations
86 config S3C64XX_SETUP_USB_PHY
89 Common setup code for USB PHY controller
91 # S36400 Macchine support
96 select S3C64XX_SETUP_SDHCI
100 Machine support for the Samsung SMDK6400
102 # S3C6410 machine support
107 select S3C64XX_SETUP_FB_24BPP
110 Machine support for the A&W6410
115 select S3C64XX_SETUP_FB_24BPP
116 select S3C64XX_SETUP_SDHCI
119 select S3C_DEV_HSMMC1
121 select S3C_DEV_USB_HOST
122 select SAMSUNG_DEV_ADC
123 select SAMSUNG_DEV_TS
125 Machine support for the FriendlyARM MINI6410
130 select S3C64XX_SETUP_FB_24BPP
131 select S3C64XX_SETUP_SDHCI
134 select S3C_DEV_HSMMC1
136 select S3C_DEV_USB_HOST
137 select SAMSUNG_DEV_ADC
138 select SAMSUNG_DEV_TS
140 Machine support for the CoreWind REAL6410
145 select HAVE_S3C2410_WATCHDOG if WATCHDOG
146 select S3C64XX_SETUP_FB_24BPP
147 select S3C64XX_SETUP_I2C1
148 select S3C64XX_SETUP_IDE
149 select S3C64XX_SETUP_KEYPAD
150 select S3C64XX_SETUP_SDHCI
151 select S3C64XX_SETUP_USB_PHY
154 select S3C_DEV_HSMMC1
157 select S3C_DEV_USB_HOST
158 select S3C_DEV_USB_HSOTG
160 select SAMSUNG_DEV_ADC
161 select SAMSUNG_DEV_BACKLIGHT
162 select SAMSUNG_DEV_IDE
163 select SAMSUNG_DEV_KEYPAD
164 select SAMSUNG_DEV_PWM
165 select SAMSUNG_DEV_TS
167 Machine support for the Samsung SMDK6410
169 # At least some of the SMDK6410s were shipped with the card detect
170 # for the MMC/SD slots connected to the same input. This means that
171 # either the boards need to be altered to have channel0 to an alternate
172 # configuration or that only one slot can be used.
175 prompt "SMDK6410 MMC/SD slot setup"
176 depends on MACH_SMDK6410
178 config SMDK6410_SD_CH0
179 bool "Use channel 0 only"
180 depends on MACH_SMDK6410
182 Select CON7 (channel 0) as the MMC/SD slot, as
183 at least some SMDK6410 boards come with the
184 resistors fitted so that the card detects for
185 channels 0 and 1 are the same.
187 config SMDK6410_SD_CH1
188 bool "Use channel 1 only"
189 depends on MACH_SMDK6410
191 Select CON6 (channel 1) as the MMC/SD slot, as
192 at least some SMDK6410 boards come with the
193 resistors fitted so that the card detects for
194 channels 0 and 1 are the same.
198 config SMDK6410_WM1190_EV1
199 bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
200 depends on MACH_SMDK6410
201 select MFD_WM8350_I2C
203 select REGULATOR_WM8350
204 select SAMSUNG_GPIO_EXTRA64
206 The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
207 and audio daughtercard for the Samsung SMDK6410 reference
208 platform. Enabling this option will build support for this
209 module into the kernel. The presence of the module will be
210 detected at runtime so the resulting kernel can be used
211 with or without the 1190-EV1 fitted.
213 config SMDK6410_WM1192_EV1
214 bool "Support Wolfson Microelectronics 1192-EV1 PMIC card"
215 depends on MACH_SMDK6410
217 select MFD_WM831X_I2C
219 select REGULATOR_WM831X
220 select SAMSUNG_GPIO_EXTRA64
222 The Wolfson Microelectronics 1192-EV1 is a WM831x based PMIC
223 daughtercard for the Samsung SMDK6410 reference platform.
224 Enabling this option will build support for this module into
225 the kernel. The presence of the daughtercard will be
226 detected at runtime so the resulting kernel can be used
227 with or without the 1192-EV1 fitted.
232 select S3C64XX_SETUP_I2C1
233 select S3C_DEV_HSMMC1
236 Machine support for the Samsung NCP
241 select S3C64XX_SETUP_FB_24BPP
244 select S3C_DEV_USB_HOST
245 select SAMSUNG_DEV_PWM
247 Machine support for the Airgoo HMT
252 select S3C64XX_SETUP_FB_24BPP
253 select S3C64XX_SETUP_SDHCI
254 select S3C64XX_SETUP_USB_PHY
257 select S3C_DEV_HSMMC1
258 select S3C_DEV_HSMMC2
261 select S3C_DEV_USB_HOST
262 select S3C_DEV_USB_HSOTG
263 select SAMSUNG_DEV_ADC
264 select SAMSUNG_DEV_PWM
265 select SAMSUNG_DEV_TS
267 Shared machine support for SmartQ 5/7
273 Machine support for the SmartQ 5
279 Machine support for the SmartQ 7
281 config MACH_WLF_CRAGG_6410
282 bool "Wolfson Cragganmore 6410"
285 select LEDS_GPIO_REGISTER
286 select S3C64XX_DEV_SPI0
287 select S3C64XX_SETUP_FB_24BPP
288 select S3C64XX_SETUP_I2C1
289 select S3C64XX_SETUP_IDE
290 select S3C64XX_SETUP_KEYPAD
291 select S3C64XX_SETUP_SDHCI
292 select S3C64XX_SETUP_SPI
293 select S3C64XX_SETUP_USB_PHY
296 select S3C_DEV_HSMMC1
297 select S3C_DEV_HSMMC2
300 select S3C_DEV_USB_HOST
301 select S3C_DEV_USB_HSOTG
303 select SAMSUNG_DEV_ADC
304 select SAMSUNG_DEV_KEYPAD
305 select SAMSUNG_DEV_PWM
306 select SAMSUNG_GPIO_EXTRA128
308 Machine support for the Wolfson Cragganmore S3C6410 variant.