x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / m32r / include / asm / m32104ut / m32104ut_pld.h
blob1feae9709f24f9d2a706e9509d36d26e4df902e9
1 #ifndef _M32104UT_M32104UT_PLD_H
2 #define _M32104UT_M32104UT_PLD_H
4 /*
5 * include/asm-m32r/m32104ut/m32104ut_pld.h
7 * Definitions for Programmable Logic Device(PLD) on M32104UT board.
8 * Based on m32700ut_pld.h
10 * Copyright (c) 2002 Takeo Takahashi
11 * Copyright (c) 2005 Naoto Sugai
13 * This file is subject to the terms and conditions of the GNU General
14 * Public License. See the file "COPYING" in the main directory of
15 * this archive for more details.
18 #if defined(CONFIG_PLAT_M32104UT)
19 #define PLD_PLAT_BASE 0x02c00000
20 #else
21 #error "no platform configuration"
22 #endif
24 #ifndef __ASSEMBLY__
26 * C functions use non-cache address.
28 #define PLD_BASE (PLD_PLAT_BASE /* + NONCACHE_OFFSET */)
29 #define __reg8 (volatile unsigned char *)
30 #define __reg16 (volatile unsigned short *)
31 #define __reg32 (volatile unsigned int *)
32 #else
33 #define PLD_BASE (PLD_PLAT_BASE + NONCACHE_OFFSET)
34 #define __reg8
35 #define __reg16
36 #define __reg32
37 #endif /* __ASSEMBLY__ */
39 /* CFC */
40 #define PLD_CFRSTCR __reg16(PLD_BASE + 0x0000)
41 #define PLD_CFSTS __reg16(PLD_BASE + 0x0002)
42 #define PLD_CFIMASK __reg16(PLD_BASE + 0x0004)
43 #define PLD_CFBUFCR __reg16(PLD_BASE + 0x0006)
45 /* MMC */
46 #define PLD_MMCCR __reg16(PLD_BASE + 0x4000)
47 #define PLD_MMCMOD __reg16(PLD_BASE + 0x4002)
48 #define PLD_MMCSTS __reg16(PLD_BASE + 0x4006)
49 #define PLD_MMCBAUR __reg16(PLD_BASE + 0x400a)
50 #define PLD_MMCCMDBCUT __reg16(PLD_BASE + 0x400c)
51 #define PLD_MMCCDTBCUT __reg16(PLD_BASE + 0x400e)
52 #define PLD_MMCDET __reg16(PLD_BASE + 0x4010)
53 #define PLD_MMCWP __reg16(PLD_BASE + 0x4012)
54 #define PLD_MMCWDATA __reg16(PLD_BASE + 0x5000)
55 #define PLD_MMCRDATA __reg16(PLD_BASE + 0x6000)
56 #define PLD_MMCCMDDATA __reg16(PLD_BASE + 0x7000)
57 #define PLD_MMCRSPDATA __reg16(PLD_BASE + 0x7006)
59 /* ICU
60 * ICUISTS: status register
61 * ICUIREQ0: request register
62 * ICUIREQ1: request register
63 * ICUCR3: control register for CFIREQ# interrupt
64 * ICUCR4: control register for CFC Card insert interrupt
65 * ICUCR5: control register for CFC Card eject interrupt
66 * ICUCR6: control register for external interrupt
67 * ICUCR11: control register for MMC Card insert/eject interrupt
68 * ICUCR13: control register for SC error interrupt
69 * ICUCR14: control register for SC receive interrupt
70 * ICUCR15: control register for SC send interrupt
73 #define PLD_IRQ_INT0 (M32104UT_PLD_IRQ_BASE + 0) /* None */
74 #define PLD_IRQ_CFIREQ (M32104UT_PLD_IRQ_BASE + 3) /* CF IREQ */
75 #define PLD_IRQ_CFC_INSERT (M32104UT_PLD_IRQ_BASE + 4) /* CF Insert */
76 #define PLD_IRQ_CFC_EJECT (M32104UT_PLD_IRQ_BASE + 5) /* CF Eject */
77 #define PLD_IRQ_EXINT (M32104UT_PLD_IRQ_BASE + 6) /* EXINT */
78 #define PLD_IRQ_MMCCARD (M32104UT_PLD_IRQ_BASE + 11) /* MMC Insert/Eject */
79 #define PLD_IRQ_SC_ERROR (M32104UT_PLD_IRQ_BASE + 13) /* SC error */
80 #define PLD_IRQ_SC_RCV (M32104UT_PLD_IRQ_BASE + 14) /* SC receive */
81 #define PLD_IRQ_SC_SND (M32104UT_PLD_IRQ_BASE + 15) /* SC send */
83 #define PLD_ICUISTS __reg16(PLD_BASE + 0x8002)
84 #define PLD_ICUISTS_VECB_MASK (0xf000)
85 #define PLD_ICUISTS_VECB(x) ((x) & PLD_ICUISTS_VECB_MASK)
86 #define PLD_ICUISTS_ISN_MASK (0x07c0)
87 #define PLD_ICUISTS_ISN(x) ((x) & PLD_ICUISTS_ISN_MASK)
88 #define PLD_ICUCR3 __reg16(PLD_BASE + 0x8104)
89 #define PLD_ICUCR4 __reg16(PLD_BASE + 0x8106)
90 #define PLD_ICUCR5 __reg16(PLD_BASE + 0x8108)
91 #define PLD_ICUCR6 __reg16(PLD_BASE + 0x810a)
92 #define PLD_ICUCR11 __reg16(PLD_BASE + 0x8114)
93 #define PLD_ICUCR13 __reg16(PLD_BASE + 0x8118)
94 #define PLD_ICUCR14 __reg16(PLD_BASE + 0x811a)
95 #define PLD_ICUCR15 __reg16(PLD_BASE + 0x811c)
96 #define PLD_ICUCR_IEN (0x1000)
97 #define PLD_ICUCR_IREQ (0x0100)
98 #define PLD_ICUCR_ISMOD00 (0x0000) /* Low edge */
99 #define PLD_ICUCR_ISMOD01 (0x0010) /* Low level */
100 #define PLD_ICUCR_ISMOD02 (0x0020) /* High edge */
101 #define PLD_ICUCR_ISMOD03 (0x0030) /* High level */
102 #define PLD_ICUCR_ILEVEL0 (0x0000)
103 #define PLD_ICUCR_ILEVEL1 (0x0001)
104 #define PLD_ICUCR_ILEVEL2 (0x0002)
105 #define PLD_ICUCR_ILEVEL3 (0x0003)
106 #define PLD_ICUCR_ILEVEL4 (0x0004)
107 #define PLD_ICUCR_ILEVEL5 (0x0005)
108 #define PLD_ICUCR_ILEVEL6 (0x0006)
109 #define PLD_ICUCR_ILEVEL7 (0x0007)
111 /* Power Control of MMC and CF */
112 #define PLD_CPCR __reg16(PLD_BASE + 0x14000)
113 #define PLD_CPCR_CDP 0x0001
115 /* LED Control
117 * 1: DIP swich side
118 * 2: Reset switch side
120 #define PLD_IOLEDCR __reg16(PLD_BASE + 0x14002)
121 #define PLD_IOLED_1_ON 0x001
122 #define PLD_IOLED_1_OFF 0x000
123 #define PLD_IOLED_2_ON 0x002
124 #define PLD_IOLED_2_OFF 0x000
126 /* DIP Switch
127 * 0: Write-protect of Flash Memory (0:protected, 1:non-protected)
128 * 1: -
129 * 2: -
130 * 3: -
132 #define PLD_IOSWSTS __reg16(PLD_BASE + 0x14004)
133 #define PLD_IOSWSTS_IOSW2 0x0200
134 #define PLD_IOSWSTS_IOSW1 0x0100
135 #define PLD_IOSWSTS_IOWP0 0x0001
137 /* CRC */
138 #define PLD_CRC7DATA __reg16(PLD_BASE + 0x18000)
139 #define PLD_CRC7INDATA __reg16(PLD_BASE + 0x18002)
140 #define PLD_CRC16DATA __reg16(PLD_BASE + 0x18004)
141 #define PLD_CRC16INDATA __reg16(PLD_BASE + 0x18006)
142 #define PLD_CRC16ADATA __reg16(PLD_BASE + 0x18008)
143 #define PLD_CRC16AINDATA __reg16(PLD_BASE + 0x1800a)
145 /* RTC */
146 #define PLD_RTCCR __reg16(PLD_BASE + 0x1c000)
147 #define PLD_RTCBAUR __reg16(PLD_BASE + 0x1c002)
148 #define PLD_RTCWRDATA __reg16(PLD_BASE + 0x1c004)
149 #define PLD_RTCRDDATA __reg16(PLD_BASE + 0x1c006)
150 #define PLD_RTCRSTODT __reg16(PLD_BASE + 0x1c008)
152 /* SIM Card */
153 #define PLD_SCCR __reg16(PLD_BASE + 0x38000)
154 #define PLD_SCMOD __reg16(PLD_BASE + 0x38004)
155 #define PLD_SCSTS __reg16(PLD_BASE + 0x38006)
156 #define PLD_SCINTCR __reg16(PLD_BASE + 0x38008)
157 #define PLD_SCBAUR __reg16(PLD_BASE + 0x3800a)
158 #define PLD_SCTXB __reg16(PLD_BASE + 0x3800c)
159 #define PLD_SCRXB __reg16(PLD_BASE + 0x3800e)
161 #endif /* _M32104UT_M32104UT_PLD_H */