x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / mips / pci / pci-lantiq.c
blobcb1ef9984069306dc8814f748581edca229f2c47
1 /*
2 * This program is free software; you can redistribute it and/or modify it
3 * under the terms of the GNU General Public License version 2 as published
4 * by the Free Software Foundation.
6 * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
7 */
9 #include <linux/types.h>
10 #include <linux/pci.h>
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/delay.h>
14 #include <linux/mm.h>
15 #include <linux/vmalloc.h>
16 #include <linux/module.h>
17 #include <linux/clk.h>
18 #include <linux/of_platform.h>
19 #include <linux/of_gpio.h>
20 #include <linux/of_irq.h>
21 #include <linux/of_pci.h>
23 #include <asm/pci.h>
24 #include <asm/gpio.h>
25 #include <asm/addrspace.h>
27 #include <lantiq_soc.h>
28 #include <lantiq_irq.h>
30 #include "pci-lantiq.h"
32 #define PCI_CR_FCI_ADDR_MAP0 0x00C0
33 #define PCI_CR_FCI_ADDR_MAP1 0x00C4
34 #define PCI_CR_FCI_ADDR_MAP2 0x00C8
35 #define PCI_CR_FCI_ADDR_MAP3 0x00CC
36 #define PCI_CR_FCI_ADDR_MAP4 0x00D0
37 #define PCI_CR_FCI_ADDR_MAP5 0x00D4
38 #define PCI_CR_FCI_ADDR_MAP6 0x00D8
39 #define PCI_CR_FCI_ADDR_MAP7 0x00DC
40 #define PCI_CR_CLK_CTRL 0x0000
41 #define PCI_CR_PCI_MOD 0x0030
42 #define PCI_CR_PC_ARB 0x0080
43 #define PCI_CR_FCI_ADDR_MAP11hg 0x00E4
44 #define PCI_CR_BAR11MASK 0x0044
45 #define PCI_CR_BAR12MASK 0x0048
46 #define PCI_CR_BAR13MASK 0x004C
47 #define PCI_CS_BASE_ADDR1 0x0010
48 #define PCI_CR_PCI_ADDR_MAP11 0x0064
49 #define PCI_CR_FCI_BURST_LENGTH 0x00E8
50 #define PCI_CR_PCI_EOI 0x002C
51 #define PCI_CS_STS_CMD 0x0004
53 #define PCI_MASTER0_REQ_MASK_2BITS 8
54 #define PCI_MASTER1_REQ_MASK_2BITS 10
55 #define PCI_MASTER2_REQ_MASK_2BITS 12
56 #define INTERNAL_ARB_ENABLE_BIT 0
58 #define LTQ_CGU_IFCCR 0x0018
59 #define LTQ_CGU_PCICR 0x0034
61 #define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y))
62 #define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x))
64 #define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y))
65 #define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x))
67 __iomem void *ltq_pci_mapped_cfg;
68 static __iomem void *ltq_pci_membase;
70 static int reset_gpio;
71 static struct clk *clk_pci, *clk_external;
72 static struct resource pci_io_resource;
73 static struct resource pci_mem_resource;
74 static struct pci_ops pci_ops = {
75 .read = ltq_pci_read_config_dword,
76 .write = ltq_pci_write_config_dword
79 static struct pci_controller pci_controller = {
80 .pci_ops = &pci_ops,
81 .mem_resource = &pci_mem_resource,
82 .mem_offset = 0x00000000UL,
83 .io_resource = &pci_io_resource,
84 .io_offset = 0x00000000UL,
87 static inline u32 ltq_calc_bar11mask(void)
89 u32 mem, bar11mask;
91 /* BAR11MASK value depends on available memory on system. */
92 mem = get_num_physpages() * PAGE_SIZE;
93 bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
95 return bar11mask;
98 static int ltq_pci_startup(struct platform_device *pdev)
100 struct device_node *node = pdev->dev.of_node;
101 const __be32 *req_mask, *bus_clk;
102 u32 temp_buffer;
104 /* get our clocks */
105 clk_pci = clk_get(&pdev->dev, NULL);
106 if (IS_ERR(clk_pci)) {
107 dev_err(&pdev->dev, "failed to get pci clock\n");
108 return PTR_ERR(clk_pci);
111 clk_external = clk_get(&pdev->dev, "external");
112 if (IS_ERR(clk_external)) {
113 clk_put(clk_pci);
114 dev_err(&pdev->dev, "failed to get external pci clock\n");
115 return PTR_ERR(clk_external);
118 /* read the bus speed that we want */
119 bus_clk = of_get_property(node, "lantiq,bus-clock", NULL);
120 if (bus_clk)
121 clk_set_rate(clk_pci, *bus_clk);
123 /* and enable the clocks */
124 clk_enable(clk_pci);
125 if (of_find_property(node, "lantiq,external-clock", NULL))
126 clk_enable(clk_external);
127 else
128 clk_disable(clk_external);
130 /* setup reset gpio used by pci */
131 reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
132 if (gpio_is_valid(reset_gpio)) {
133 int ret = devm_gpio_request(&pdev->dev,
134 reset_gpio, "pci-reset");
135 if (ret) {
136 dev_err(&pdev->dev,
137 "failed to request gpio %d\n", reset_gpio);
138 return ret;
140 gpio_direction_output(reset_gpio, 1);
143 /* enable auto-switching between PCI and EBU */
144 ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
146 /* busy, i.e. configuration is not done, PCI access has to be retried */
147 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
148 wmb();
149 /* BUS Master/IO/MEM access */
150 ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
152 /* enable external 2 PCI masters */
153 temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
154 /* setup the request mask */
155 req_mask = of_get_property(node, "req-mask", NULL);
156 if (req_mask)
157 temp_buffer &= ~((*req_mask & 0xf) << 16);
158 else
159 temp_buffer &= ~0xf0000;
160 /* enable internal arbiter */
161 temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
162 /* enable internal PCI master reqest */
163 temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
165 /* enable EBU request */
166 temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
168 /* enable all external masters request */
169 temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
170 ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
171 wmb();
173 /* setup BAR memory regions */
174 ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
175 ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
176 ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
177 ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
178 ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
179 ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
180 ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
181 ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
182 ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
183 ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
184 ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
185 ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
186 /* both TX and RX endian swap are enabled */
187 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
188 wmb();
189 ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
190 PCI_CR_BAR12MASK);
191 ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
192 PCI_CR_BAR13MASK);
193 /*use 8 dw burst length */
194 ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
195 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
196 wmb();
198 /* setup irq line */
199 ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
200 ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
202 /* toggle reset pin */
203 if (gpio_is_valid(reset_gpio)) {
204 __gpio_set_value(reset_gpio, 0);
205 wmb();
206 mdelay(1);
207 __gpio_set_value(reset_gpio, 1);
209 return 0;
212 static int ltq_pci_probe(struct platform_device *pdev)
214 struct resource *res_cfg, *res_bridge;
216 pci_clear_flags(PCI_PROBE_ONLY);
218 res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
219 res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
220 if (!res_cfg || !res_bridge) {
221 dev_err(&pdev->dev, "missing memory reources\n");
222 return -EINVAL;
225 ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge);
226 if (IS_ERR(ltq_pci_membase))
227 return PTR_ERR(ltq_pci_membase);
229 ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg);
230 if (IS_ERR(ltq_pci_mapped_cfg))
231 return PTR_ERR(ltq_pci_mapped_cfg);
233 ltq_pci_startup(pdev);
235 pci_load_of_ranges(&pci_controller, pdev->dev.of_node);
236 register_pci_controller(&pci_controller);
237 return 0;
240 static const struct of_device_id ltq_pci_match[] = {
241 { .compatible = "lantiq,pci-xway" },
244 MODULE_DEVICE_TABLE(of, ltq_pci_match);
246 static struct platform_driver ltq_pci_driver = {
247 .probe = ltq_pci_probe,
248 .driver = {
249 .name = "pci-xway",
250 .owner = THIS_MODULE,
251 .of_match_table = ltq_pci_match,
255 int __init pcibios_init(void)
257 int ret = platform_driver_register(&ltq_pci_driver);
258 if (ret)
259 pr_info("pci-xway: Error registering platform driver!");
260 return ret;
263 arch_initcall(pcibios_init);