x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / powerpc / boot / dts / b4qds.dtsi
blobe6d2f8f9054463e567a4f0202147474496a0dadb
1 /*
2  * B4420DS Device Tree Source
3  *
4  * Copyright 2012 Freescale Semiconductor, Inc.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *     * Redistributions of source code must retain the above copyright
9  *       notice, this list of conditions and the following disclaimer.
10  *     * Redistributions in binary form must reproduce the above copyright
11  *       notice, this list of conditions and the following disclaimer in the
12  *       documentation and/or other materials provided with the distribution.
13  *     * Neither the name of Freescale Semiconductor nor the
14  *       names of its contributors may be used to endorse or promote products
15  *       derived from this software without specific prior written permission.
16  *
17  *
18  * ALTERNATIVELY, this software may be distributed under the terms of the
19  * GNU General Public License ("GPL") as published by the Free Software
20  * Foundation, either version 2 of that License or (at your option) any
21  * later version.
22  *
23  * This software is provided by Freescale Semiconductor "as is" and any
24  * express or implied warranties, including, but not limited to, the implied
25  * warranties of merchantability and fitness for a particular purpose are
26  * disclaimed. In no event shall Freescale Semiconductor be liable for any
27  * direct, indirect, incidental, special, exemplary, or consequential damages
28  * (including, but not limited to, procurement of substitute goods or services;
29  * loss of use, data, or profits; or business interruption) however caused and
30  * on any theory of liability, whether in contract, strict liability, or tort
31  * (including negligence or otherwise) arising in any way out of the use of
32  * this software, even if advised of the possibility of such damage.
33  */
35 / {
36         model = "fsl,B4QDS";
37         compatible = "fsl,B4QDS";
38         #address-cells = <2>;
39         #size-cells = <2>;
40         interrupt-parent = <&mpic>;
42         ifc: localbus@ffe124000 {
43                 reg = <0xf 0xfe124000 0 0x2000>;
44                 ranges = <0 0 0xf 0xe8000000 0x08000000
45                           2 0 0xf 0xff800000 0x00010000
46                           3 0 0xf 0xffdf0000 0x00008000>;
48                 nor@0,0 {
49                         #address-cells = <1>;
50                         #size-cells = <1>;
51                         compatible = "cfi-flash";
52                         reg = <0x0 0x0 0x8000000>;
53                         bank-width = <2>;
54                         device-width = <1>;
55                 };
57                 nand@2,0 {
58                         #address-cells = <1>;
59                         #size-cells = <1>;
60                         compatible = "fsl,ifc-nand";
61                         reg = <0x2 0x0 0x10000>;
63                         partition@0 {
64                                 /* This location must not be altered  */
65                                 /* 1MB for u-boot Bootloader Image */
66                                 reg = <0x0 0x00100000>;
67                                 label = "NAND U-Boot Image";
68                                 read-only;
69                         };
71                         partition@100000 {
72                                 /* 1MB for DTB Image */
73                                 reg = <0x00100000 0x00100000>;
74                                 label = "NAND DTB Image";
75                         };
77                         partition@200000 {
78                                 /* 10MB for Linux Kernel Image */
79                                 reg = <0x00200000 0x00A00000>;
80                                 label = "NAND Linux Kernel Image";
81                         };
83                         partition@c00000 {
84                                 /* 500MB for Root file System Image */
85                                 reg = <0x00c00000 0x1F400000>;
86                                 label = "NAND RFS Image";
87                         };
88                 };
90                 board-control@3,0 {
91                         compatible = "fsl,b4qds-fpga", "fsl,fpga-qixis";
92                         reg = <3 0 0x300>;
93                 };
94         };
96         memory {
97                 device_type = "memory";
98         };
100         dcsr: dcsr@f00000000 {
101                 ranges = <0x00000000 0xf 0x00000000 0x01052000>;
102         };
104         soc: soc@ffe000000 {
105                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
106                 reg = <0xf 0xfe000000 0 0x00001000>;
107                 spi@110000 {
108                         flash@0 {
109                                 #address-cells = <1>;
110                                 #size-cells = <1>;
111                                 compatible = "sst,sst25wf040";
112                                 reg = <0>;
113                                 spi-max-frequency = <40000000>; /* input clock */
114                         };
115                 };
117                 sdhc@114000 {
118                         /*Disabled as there is no sdhc connector on B4420QDS board*/
119                         status = "disabled";
120                 };
122                 i2c@118000 {
123                         eeprom@50 {
124                                 compatible = "at24,24c64";
125                                 reg = <0x50>;
126                         };
127                         eeprom@51 {
128                                 compatible = "at24,24c256";
129                                 reg = <0x51>;
130                         };
131                         eeprom@53 {
132                                 compatible = "at24,24c256";
133                                 reg = <0x53>;
134                         };
135                         eeprom@57 {
136                                 compatible = "at24,24c256";
137                                 reg = <0x57>;
138                         };
139                         rtc@68 {
140                                 compatible = "dallas,ds3232";
141                                 reg = <0x68>;
142                         };
143                 };
145                 usb@210000 {
146                         dr_mode = "host";
147                         phy_type = "ulpi";
148                 };
150         };
152         pci0: pcie@ffe200000 {
153                 reg = <0xf 0xfe200000 0 0x10000>;
154                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
155                           0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
156                 pcie@0 {
157                         ranges = <0x02000000 0 0xe0000000
158                                   0x02000000 0 0xe0000000
159                                   0 0x20000000
161                                   0x01000000 0 0x00000000
162                                   0x01000000 0 0x00000000
163                                   0 0x00010000>;
164                 };
165         };
169 /include/ "fsl/b4si-post.dtsi"