x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / powerpc / boot / dts / gef_sbc610.dts
blobd5341f5741aac402a29ff71fe16896a8f4c47e2d
1 /*
2  * GE SBC610 Device Tree Source
3  *
4  * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc.
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  *
11  * Based on: SBS CM6 Device Tree Source
12  * Copyright 2007 SBS Technologies GmbH & Co. KG
13  * And: mpc8641_hpcn.dts (MPC8641 HPCN Device Tree Source)
14  * Copyright 2006 Freescale Semiconductor Inc.
15  */
18  * Compiled with dtc -I dts -O dtb -o gef_sbc610.dtb gef_sbc610.dts
19  */
21 /dts-v1/;
23 / {
24         model = "GEF_SBC610";
25         compatible = "gef,sbc610";
26         #address-cells = <1>;
27         #size-cells = <1>;
29         aliases {
30                 ethernet0 = &enet0;
31                 ethernet1 = &enet1;
32                 serial0 = &serial0;
33                 serial1 = &serial1;
34                 pci0 = &pci0;
35         };
37         cpus {
38                 #address-cells = <1>;
39                 #size-cells = <0>;
41                 PowerPC,8641@0 {
42                         device_type = "cpu";
43                         reg = <0>;
44                         d-cache-line-size = <32>;       // 32 bytes
45                         i-cache-line-size = <32>;       // 32 bytes
46                         d-cache-size = <32768>;         // L1, 32K
47                         i-cache-size = <32768>;         // L1, 32K
48                         timebase-frequency = <0>;       // From uboot
49                         bus-frequency = <0>;            // From uboot
50                         clock-frequency = <0>;          // From uboot
51                 };
52                 PowerPC,8641@1 {
53                         device_type = "cpu";
54                         reg = <1>;
55                         d-cache-line-size = <32>;       // 32 bytes
56                         i-cache-line-size = <32>;       // 32 bytes
57                         d-cache-size = <32768>;         // L1, 32K
58                         i-cache-size = <32768>;         // L1, 32K
59                         timebase-frequency = <0>;       // From uboot
60                         bus-frequency = <0>;            // From uboot
61                         clock-frequency = <0>;          // From uboot
62                 };
63         };
65         memory {
66                 device_type = "memory";
67                 reg = <0x0 0x40000000>; // set by uboot
68         };
70         localbus@fef05000 {
71                 #address-cells = <2>;
72                 #size-cells = <1>;
73                 compatible = "fsl,mpc8641-localbus", "simple-bus";
74                 reg = <0xfef05000 0x1000>;
75                 interrupts = <19 2>;
76                 interrupt-parent = <&mpic>;
78                 ranges = <0 0 0xff000000 0x01000000     // 16MB Boot flash
79                           1 0 0xe8000000 0x08000000     // Paged Flash 0
80                           2 0 0xe0000000 0x08000000     // Paged Flash 1
81                           3 0 0xfc100000 0x00020000     // NVRAM
82                           4 0 0xfc000000 0x00008000     // FPGA
83                           5 0 0xfc008000 0x00008000     // AFIX FPGA
84                           6 0 0xfd000000 0x00800000     // IO FPGA (8-bit)
85                           7 0 0xfd800000 0x00800000>;   // IO FPGA (32-bit)
87                 /* flash@0,0 is a mirror of part of the memory in flash@1,0
88                 flash@0,0 {
89                         compatible = "gef,sbc610-firmware-mirror", "cfi-flash";
90                         reg = <0x0 0x0 0x1000000>;
91                         bank-width = <4>;
92                         device-width = <2>;
93                         #address-cells = <1>;
94                         #size-cells = <1>;
95                         partition@0 {
96                                 label = "firmware";
97                                 reg = <0x0 0x1000000>;
98                                 read-only;
99                         };
100                 };
101                 */
103                 flash@1,0 {
104                         compatible = "gef,sbc610-paged-flash", "cfi-flash";
105                         reg = <0x1 0x0 0x8000000>;
106                         bank-width = <4>;
107                         device-width = <2>;
108                         #address-cells = <1>;
109                         #size-cells = <1>;
110                         partition@0 {
111                                 label = "user";
112                                 reg = <0x0 0x7800000>;
113                         };
114                         partition@7800000 {
115                                 label = "firmware";
116                                 reg = <0x7800000 0x800000>;
117                                 read-only;
118                         };
119                 };
121                 nvram@3,0 {
122                         device_type = "nvram";
123                         compatible = "simtek,stk14ca8";
124                         reg = <0x3 0x0 0x20000>;
125                 };
127                 fpga@4,0 {
128                         compatible = "gef,fpga-regs";
129                         reg = <0x4 0x0 0x40>;
130                 };
132                 wdt@4,2000 {
133                         compatible = "gef,fpga-wdt";
134                         reg = <0x4 0x2000 0x8>;
135                         interrupts = <0x1a 0x4>;
136                         interrupt-parent = <&gef_pic>;
137                 };
138                 /* Second watchdog available, driver currently supports one.
139                 wdt@4,2010 {
140                         compatible = "gef,fpga-wdt";
141                         reg = <0x4 0x2010 0x8>;
142                         interrupts = <0x1b 0x4>;
143                         interrupt-parent = <&gef_pic>;
144                 };
145                 */
146                 gef_pic: pic@4,4000 {
147                         #interrupt-cells = <1>;
148                         interrupt-controller;
149                         compatible = "gef,fpga-pic";
150                         reg = <0x4 0x4000 0x20>;
151                         interrupts = <0x8
152                                       0x9>;
153                         interrupt-parent = <&mpic>;
155                 };
156                 gef_gpio: gpio@7,14000 {
157                         #gpio-cells = <2>;
158                         compatible = "gef,sbc610-gpio";
159                         reg = <0x7 0x14000 0x24>;
160                         gpio-controller;
161                 };
162         };
164         soc@fef00000 {
165                 #address-cells = <1>;
166                 #size-cells = <1>;
167                 #interrupt-cells = <2>;
168                 device_type = "soc";
169                 compatible = "simple-bus";
170                 ranges = <0x0 0xfef00000 0x00100000>;
171                 bus-frequency = <33333333>;
173                 mcm-law@0 {
174                         compatible = "fsl,mcm-law";
175                         reg = <0x0 0x1000>;
176                         fsl,num-laws = <10>;
177                 };
179                 mcm@1000 {
180                         compatible = "fsl,mpc8641-mcm", "fsl,mcm";
181                         reg = <0x1000 0x1000>;
182                         interrupts = <17 2>;
183                         interrupt-parent = <&mpic>;
184                 };
186                 i2c1: i2c@3000 {
187                         #address-cells = <1>;
188                         #size-cells = <0>;
189                         compatible = "fsl-i2c";
190                         reg = <0x3000 0x100>;
191                         interrupts = <0x2b 0x2>;
192                         interrupt-parent = <&mpic>;
193                         dfsrr;
195                         hwmon@48 {
196                                 compatible = "national,lm92";
197                                 reg = <0x48>;
198                         };
200                         hwmon@4c {
201                                 compatible = "adi,adt7461";
202                                 reg = <0x4c>;
203                         };
205                         rtc@51 {
206                                 compatible = "epson,rx8581";
207                                 reg = <0x00000051>;
208                         };
210                         eti@6b {
211                                 compatible = "dallas,ds1682";
212                                 reg = <0x6b>;
213                         };
214                 };
216                 i2c2: i2c@3100 {
217                         #address-cells = <1>;
218                         #size-cells = <0>;
219                         compatible = "fsl-i2c";
220                         reg = <0x3100 0x100>;
221                         interrupts = <0x2b 0x2>;
222                         interrupt-parent = <&mpic>;
223                         dfsrr;
224                 };
226                 dma@21300 {
227                         #address-cells = <1>;
228                         #size-cells = <1>;
229                         compatible = "fsl,mpc8641-dma", "fsl,eloplus-dma";
230                         reg = <0x21300 0x4>;
231                         ranges = <0x0 0x21100 0x200>;
232                         cell-index = <0>;
233                         dma-channel@0 {
234                                 compatible = "fsl,mpc8641-dma-channel",
235                                            "fsl,eloplus-dma-channel";
236                                 reg = <0x0 0x80>;
237                                 cell-index = <0>;
238                                 interrupt-parent = <&mpic>;
239                                 interrupts = <20 2>;
240                         };
241                         dma-channel@80 {
242                                 compatible = "fsl,mpc8641-dma-channel",
243                                            "fsl,eloplus-dma-channel";
244                                 reg = <0x80 0x80>;
245                                 cell-index = <1>;
246                                 interrupt-parent = <&mpic>;
247                                 interrupts = <21 2>;
248                         };
249                         dma-channel@100 {
250                                 compatible = "fsl,mpc8641-dma-channel",
251                                            "fsl,eloplus-dma-channel";
252                                 reg = <0x100 0x80>;
253                                 cell-index = <2>;
254                                 interrupt-parent = <&mpic>;
255                                 interrupts = <22 2>;
256                         };
257                         dma-channel@180 {
258                                 compatible = "fsl,mpc8641-dma-channel",
259                                            "fsl,eloplus-dma-channel";
260                                 reg = <0x180 0x80>;
261                                 cell-index = <3>;
262                                 interrupt-parent = <&mpic>;
263                                 interrupts = <23 2>;
264                         };
265                 };
267                 enet0: ethernet@24000 {
268                         #address-cells = <1>;
269                         #size-cells = <1>;
270                         cell-index = <0>;
271                         device_type = "network";
272                         model = "TSEC";
273                         compatible = "gianfar";
274                         reg = <0x24000 0x1000>;
275                         ranges = <0x0 0x24000 0x1000>;
276                         local-mac-address = [ 00 00 00 00 00 00 ];
277                         interrupts = <29 2 30  2 34 2>;
278                         interrupt-parent = <&mpic>;
279                         tbi-handle = <&tbi0>;
280                         phy-handle = <&phy0>;
281                         phy-connection-type = "gmii";
283                         mdio@520 {
284                                 #address-cells = <1>;
285                                 #size-cells = <0>;
286                                 compatible = "fsl,gianfar-mdio";
287                                 reg = <0x520 0x20>;
289                                 phy0: ethernet-phy@0 {
290                                         interrupt-parent = <&gef_pic>;
291                                         interrupts = <0x9 0x4>;
292                                         reg = <1>;
293                                         device_type = "ethernet-phy";
294                                 };
295                                 phy2: ethernet-phy@2 {
296                                         interrupt-parent = <&gef_pic>;
297                                         interrupts = <0x8 0x4>;
298                                         reg = <3>;
299                                         device_type = "ethernet-phy";
300                                 };
301                                 tbi0: tbi-phy@11 {
302                                         reg = <0x11>;
303                                         device_type = "tbi-phy";
304                                 };
305                         };
306                 };
308                 enet1: ethernet@26000 {
309                         #address-cells = <1>;
310                         #size-cells = <1>;
311                         cell-index = <2>;
312                         device_type = "network";
313                         model = "TSEC";
314                         compatible = "gianfar";
315                         reg = <0x26000 0x1000>;
316                         ranges = <0x0 0x26000 0x1000>;
317                         local-mac-address = [ 00 00 00 00 00 00 ];
318                         interrupts = <31 2 32 2 33 2>;
319                         interrupt-parent = <&mpic>;
320                         tbi-handle = <&tbi2>;
321                         phy-handle = <&phy2>;
322                         phy-connection-type = "gmii";
324                         mdio@520 {
325                                 #address-cells = <1>;
326                                 #size-cells = <0>;
327                                 compatible = "fsl,gianfar-tbi";
328                                 reg = <0x520 0x20>;
330                                 tbi2: tbi-phy@11 {
331                                         reg = <0x11>;
332                                         device_type = "tbi-phy";
333                                 };
334                         };
335                 };
337                 serial0: serial@4500 {
338                         cell-index = <0>;
339                         device_type = "serial";
340                         compatible = "fsl,ns16550", "ns16550";
341                         reg = <0x4500 0x100>;
342                         clock-frequency = <0>;
343                         interrupts = <0x2a 0x2>;
344                         interrupt-parent = <&mpic>;
345                 };
347                 serial1: serial@4600 {
348                         cell-index = <1>;
349                         device_type = "serial";
350                         compatible = "fsl,ns16550", "ns16550";
351                         reg = <0x4600 0x100>;
352                         clock-frequency = <0>;
353                         interrupts = <0x1c 0x2>;
354                         interrupt-parent = <&mpic>;
355                 };
357                 mpic: pic@40000 {
358                         clock-frequency = <0>;
359                         interrupt-controller;
360                         #address-cells = <0>;
361                         #interrupt-cells = <2>;
362                         reg = <0x40000 0x40000>;
363                         compatible = "chrp,open-pic";
364                         device_type = "open-pic";
365                 };
367                 msi@41600 {
368                         compatible = "fsl,mpc8641-msi", "fsl,mpic-msi";
369                         reg = <0x41600 0x80>;
370                         msi-available-ranges = <0 0x100>;
371                         interrupts = <
372                                 0xe0 0
373                                 0xe1 0
374                                 0xe2 0
375                                 0xe3 0
376                                 0xe4 0
377                                 0xe5 0
378                                 0xe6 0
379                                 0xe7 0>;
380                         interrupt-parent = <&mpic>;
381                 };
383                 global-utilities@e0000 {
384                         compatible = "fsl,mpc8641-guts";
385                         reg = <0xe0000 0x1000>;
386                         fsl,has-rstcr;
387                 };
388         };
390         pci0: pcie@fef08000 {
391                 compatible = "fsl,mpc8641-pcie";
392                 device_type = "pci";
393                 #interrupt-cells = <1>;
394                 #size-cells = <2>;
395                 #address-cells = <3>;
396                 reg = <0xfef08000 0x1000>;
397                 bus-range = <0x0 0xff>;
398                 ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x40000000
399                           0x01000000 0x0 0x00000000 0xfe000000 0x0 0x00400000>;
400                 clock-frequency = <33333333>;
401                 interrupt-parent = <&mpic>;
402                 interrupts = <0x18 0x2>;
403                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
404                 interrupt-map = <
405                         0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
406                         0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
407                         0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
408                         0x0000 0x0 0x0 0x4 &mpic 0x3 0x1
409                 >;
411                 pcie@0 {
412                         reg = <0 0 0 0 0>;
413                         #size-cells = <2>;
414                         #address-cells = <3>;
415                         device_type = "pci";
416                         ranges = <0x02000000 0x0 0x80000000
417                                   0x02000000 0x0 0x80000000
418                                   0x0 0x40000000
420                                   0x01000000 0x0 0x00000000
421                                   0x01000000 0x0 0x00000000
422                                   0x0 0x00400000>;
423                 };
424         };