| blob | 811848e93aef0f90eaab3f51878c8bbd0af56406 |
1 /*
2 * MPC8315E RDB Device Tree Source
3 *
4 * Copyright 2007 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
12 /dts-v1/;
14 / {
15 compatible = "fsl,mpc8315erdb";
16 #address-cells = <1>;
17 #size-cells = <1>;
19 aliases {
20 ethernet0 = &enet0;
21 ethernet1 = &enet1;
22 serial0 = &serial0;
23 serial1 = &serial1;
24 pci0 = &pci0;
25 pci1 = &pci1;
26 pci2 = &pci2;
27 };
29 cpus {
30 #address-cells = <1>;
31 #size-cells = <0>;
33 PowerPC,8315@0 {
34 device_type = "cpu";
35 reg = <0x0>;
36 d-cache-line-size = <32>;
37 i-cache-line-size = <32>;
38 d-cache-size = <16384>;
39 i-cache-size = <16384>;
40 timebase-frequency = <0>; // from bootloader
41 bus-frequency = <0>; // from bootloader
42 clock-frequency = <0>; // from bootloader
43 };
44 };
46 memory {
47 device_type = "memory";
48 reg = <0x00000000 0x08000000>; // 128MB at 0
49 };
51 localbus@e0005000 {
52 #address-cells = <2>;
53 #size-cells = <1>;
54 compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus";
55 reg = <0xe0005000 0x1000>;
56 interrupts = <77 0x8>;
57 interrupt-parent = <&ipic>;
59 // CS0 and CS1 are swapped when
60 // booting from nand, but the
61 // addresses are the same.
62 ranges = <0x0 0x0 0xfe000000 0x00800000
63 0x1 0x0 0xe0600000 0x00002000
64 0x2 0x0 0xf0000000 0x00020000
65 0x3 0x0 0xfa000000 0x00008000>;
67 flash@0,0 {
68 #address-cells = <1>;
69 #size-cells = <1>;
70 compatible = "cfi-flash";
71 reg = <0x0 0x0 0x800000>;
72 bank-width = <2>;
73 device-width = <1>;
74 };
76 nand@1,0 {
77 #address-cells = <1>;
78 #size-cells = <1>;
79 compatible = "fsl,mpc8315-fcm-nand",
80 "fsl,elbc-fcm-nand";
81 reg = <0x1 0x0 0x2000>;
83 u-boot@0 {
84 reg = <0x0 0x100000>;
85 read-only;
86 };
88 kernel@100000 {
89 reg = <0x100000 0x300000>;
90 };
91 fs@400000 {
92 reg = <0x400000 0x1c00000>;
93 };
94 };
95 };
97 immr@e0000000 {
98 #address-cells = <1>;
99 #size-cells = <1>;
100 device_type = "soc";
101 compatible = "fsl,mpc8315-immr", "simple-bus";
102 ranges = <0 0xe0000000 0x00100000>;
103 reg = <0xe0000000 0x00000200>;
104 bus-frequency = <0>;
106 wdt@200 {
107 device_type = "watchdog";
108 compatible = "mpc83xx_wdt";
109 reg = <0x200 0x100>;
110 };
112 i2c@3000 {
113 #address-cells = <1>;
114 #size-cells = <0>;
115 cell-index = <0>;
116 compatible = "fsl-i2c";
117 reg = <0x3000 0x100>;
118 interrupts = <14 0x8>;
119 interrupt-parent = <&ipic>;
120 dfsrr;
121 rtc@68 {
122 compatible = "dallas,ds1339";
123 reg = <0x68>;
124 };
126 mcu_pio: mcu@a {
127 #gpio-cells = <2>;
128 compatible = "fsl,mc9s08qg8-mpc8315erdb",
129 "fsl,mcu-mpc8349emitx";
130 reg = <0x0a>;
131 gpio-controller;
132 };
133 };
135 spi@7000 {
136 cell-index = <0>;
137 compatible = "fsl,spi";
138 reg = <0x7000 0x1000>;
139 interrupts = <16 0x8>;
140 interrupt-parent = <&ipic>;
141 mode = "cpu";
142 };
144 dma@82a8 {
145 #address-cells = <1>;
146 #size-cells = <1>;
147 compatible = "fsl,mpc8315-dma", "fsl,elo-dma";
148 reg = <0x82a8 4>;
149 ranges = <0 0x8100 0x1a8>;
150 interrupt-parent = <&ipic>;
151 interrupts = <71 8>;
152 cell-index = <0>;
153 dma-channel@0 {
154 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
155 reg = <0 0x80>;
156 cell-index = <0>;
157 interrupt-parent = <&ipic>;
158 interrupts = <71 8>;
159 };
160 dma-channel@80 {
161 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
162 reg = <0x80 0x80>;
163 cell-index = <1>;
164 interrupt-parent = <&ipic>;
165 interrupts = <71 8>;
166 };
167 dma-channel@100 {
168 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
169 reg = <0x100 0x80>;
170 cell-index = <2>;
171 interrupt-parent = <&ipic>;
172 interrupts = <71 8>;
173 };
174 dma-channel@180 {
175 compatible = "fsl,mpc8315-dma-channel", "fsl,elo-dma-channel";
176 reg = <0x180 0x28>;
177 cell-index = <3>;
178 interrupt-parent = <&ipic>;
179 interrupts = <71 8>;
180 };
181 };
183 usb@23000 {
184 compatible = "fsl-usb2-dr";
185 reg = <0x23000 0x1000>;
186 #address-cells = <1>;
187 #size-cells = <0>;
188 interrupt-parent = <&ipic>;
189 interrupts = <38 0x8>;
190 phy_type = "utmi";
191 };
193 enet0: ethernet@24000 {
194 #address-cells = <1>;
195 #size-cells = <1>;
196 cell-index = <0>;
197 device_type = "network";
198 model = "eTSEC";
199 compatible = "gianfar";
200 reg = <0x24000 0x1000>;
201 ranges = <0x0 0x24000 0x1000>;
202 local-mac-address = [ 00 00 00 00 00 00 ];
203 interrupts = <32 0x8 33 0x8 34 0x8>;
204 interrupt-parent = <&ipic>;
205 tbi-handle = <&tbi0>;
206 phy-handle = < &phy0 >;
207 fsl,magic-packet;
209 mdio@520 {
210 #address-cells = <1>;
211 #size-cells = <0>;
212 compatible = "fsl,gianfar-mdio";
213 reg = <0x520 0x20>;
215 phy0: ethernet-phy@0 {
216 interrupt-parent = <&ipic>;
217 interrupts = <20 0x8>;
218 reg = <0x0>;
219 device_type = "ethernet-phy";
220 };
222 phy1: ethernet-phy@1 {
223 interrupt-parent = <&ipic>;
224 interrupts = <19 0x8>;
225 reg = <0x1>;
226 device_type = "ethernet-phy";
227 };
229 tbi0: tbi-phy@11 {
230 reg = <0x11>;
231 device_type = "tbi-phy";
232 };
233 };
234 };
236 enet1: ethernet@25000 {
237 #address-cells = <1>;
238 #size-cells = <1>;
239 cell-index = <1>;
240 device_type = "network";
241 model = "eTSEC";
242 compatible = "gianfar";
243 reg = <0x25000 0x1000>;
244 ranges = <0x0 0x25000 0x1000>;
245 local-mac-address = [ 00 00 00 00 00 00 ];
246 interrupts = <35 0x8 36 0x8 37 0x8>;
247 interrupt-parent = <&ipic>;
248 tbi-handle = <&tbi1>;
249 phy-handle = < &phy1 >;
250 fsl,magic-packet;
252 mdio@520 {
253 #address-cells = <1>;
254 #size-cells = <0>;
255 compatible = "fsl,gianfar-tbi";
256 reg = <0x520 0x20>;
258 tbi1: tbi-phy@11 {
259 reg = <0x11>;
260 device_type = "tbi-phy";
261 };
262 };
263 };
265 serial0: serial@4500 {
266 cell-index = <0>;
267 device_type = "serial";
268 compatible = "fsl,ns16550", "ns16550";
269 reg = <0x4500 0x100>;
270 clock-frequency = <133333333>;
271 interrupts = <9 0x8>;
272 interrupt-parent = <&ipic>;
273 };
275 serial1: serial@4600 {
276 cell-index = <1>;
277 device_type = "serial";
278 compatible = "fsl,ns16550", "ns16550";
279 reg = <0x4600 0x100>;
280 clock-frequency = <133333333>;
281 interrupts = <10 0x8>;
282 interrupt-parent = <&ipic>;
283 };
285 crypto@30000 {
286 compatible = "fsl,sec3.3", "fsl,sec3.1", "fsl,sec3.0",
287 "fsl,sec2.4", "fsl,sec2.2", "fsl,sec2.1",
288 "fsl,sec2.0";
289 reg = <0x30000 0x10000>;
290 interrupts = <11 0x8>;
291 interrupt-parent = <&ipic>;
292 fsl,num-channels = <4>;
293 fsl,channel-fifo-len = <24>;
294 fsl,exec-units-mask = <0x97c>;
295 fsl,descriptor-types-mask = <0x3a30abf>;
296 };
298 sata@18000 {
299 compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
300 reg = <0x18000 0x1000>;
301 cell-index = <1>;
302 interrupts = <44 0x8>;
303 interrupt-parent = <&ipic>;
304 };
306 sata@19000 {
307 compatible = "fsl,mpc8315-sata", "fsl,pq-sata";
308 reg = <0x19000 0x1000>;
309 cell-index = <2>;
310 interrupts = <45 0x8>;
311 interrupt-parent = <&ipic>;
312 };
314 gtm1: timer@500 {
315 compatible = "fsl,mpc8315-gtm", "fsl,gtm";
316 reg = <0x500 0x100>;
317 interrupts = <90 8 78 8 84 8 72 8>;
318 interrupt-parent = <&ipic>;
319 clock-frequency = <133333333>;
320 };
322 timer@600 {
323 compatible = "fsl,mpc8315-gtm", "fsl,gtm";
324 reg = <0x600 0x100>;
325 interrupts = <91 8 79 8 85 8 73 8>;
326 interrupt-parent = <&ipic>;
327 clock-frequency = <133333333>;
328 };
330 /* IPIC
331 * interrupts cell = <intr #, sense>
332 * sense values match linux IORESOURCE_IRQ_* defines:
333 * sense == 8: Level, low assertion
334 * sense == 2: Edge, high-to-low change
335 */
336 ipic: interrupt-controller@700 {
337 interrupt-controller;
338 #address-cells = <0>;
339 #interrupt-cells = <2>;
340 reg = <0x700 0x100>;
341 device_type = "ipic";
342 };
344 ipic-msi@7c0 {
345 compatible = "fsl,ipic-msi";
346 reg = <0x7c0 0x40>;
347 msi-available-ranges = <0 0x100>;
348 interrupts = <0x43 0x8
349 0x4 0x8
350 0x51 0x8
351 0x52 0x8
352 0x56 0x8
353 0x57 0x8
354 0x58 0x8
355 0x59 0x8>;
356 interrupt-parent = < &ipic >;
357 };
359 pmc: power@b00 {
360 compatible = "fsl,mpc8315-pmc", "fsl,mpc8313-pmc",
361 "fsl,mpc8349-pmc";
362 reg = <0xb00 0x100 0xa00 0x100>;
363 interrupts = <80 8>;
364 interrupt-parent = <&ipic>;
365 fsl,mpc8313-wakeup-timer = <>m1>;
366 };
367 };
369 pci0: pci@e0008500 {
370 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
371 interrupt-map = <
372 /* IDSEL 0x0E -mini PCI */
373 0x7000 0x0 0x0 0x1 &ipic 18 0x8
374 0x7000 0x0 0x0 0x2 &ipic 18 0x8
375 0x7000 0x0 0x0 0x3 &ipic 18 0x8
376 0x7000 0x0 0x0 0x4 &ipic 18 0x8
378 /* IDSEL 0x0F -mini PCI */
379 0x7800 0x0 0x0 0x1 &ipic 17 0x8
380 0x7800 0x0 0x0 0x2 &ipic 17 0x8
381 0x7800 0x0 0x0 0x3 &ipic 17 0x8
382 0x7800 0x0 0x0 0x4 &ipic 17 0x8
384 /* IDSEL 0x10 - PCI slot */
385 0x8000 0x0 0x0 0x1 &ipic 48 0x8
386 0x8000 0x0 0x0 0x2 &ipic 17 0x8
387 0x8000 0x0 0x0 0x3 &ipic 48 0x8
388 0x8000 0x0 0x0 0x4 &ipic 17 0x8>;
389 interrupt-parent = <&ipic>;
390 interrupts = <66 0x8>;
391 bus-range = <0x0 0x0>;
392 ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
393 0x42000000 0 0x80000000 0x80000000 0 0x10000000
394 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>;
395 clock-frequency = <66666666>;
396 #interrupt-cells = <1>;
397 #size-cells = <2>;
398 #address-cells = <3>;
399 reg = <0xe0008500 0x100 /* internal registers */
400 0xe0008300 0x8>; /* config space access registers */
401 compatible = "fsl,mpc8349-pci";
402 device_type = "pci";
403 };
405 pci1: pcie@e0009000 {
406 #address-cells = <3>;
407 #size-cells = <2>;
408 #interrupt-cells = <1>;
409 device_type = "pci";
410 compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
411 reg = <0xe0009000 0x00001000>;
412 ranges = <0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
413 0x01000000 0 0x00000000 0xb1000000 0 0x00800000>;
414 bus-range = <0 255>;
415 interrupt-map-mask = <0xf800 0 0 7>;
416 interrupt-map = <0 0 0 1 &ipic 1 8
417 0 0 0 2 &ipic 1 8
418 0 0 0 3 &ipic 1 8
419 0 0 0 4 &ipic 1 8>;
420 clock-frequency = <0>;
422 pcie@0 {
423 #address-cells = <3>;
424 #size-cells = <2>;
425 device_type = "pci";
426 reg = <0 0 0 0 0>;
427 ranges = <0x02000000 0 0xa0000000
428 0x02000000 0 0xa0000000
429 0 0x10000000
430 0x01000000 0 0x00000000
431 0x01000000 0 0x00000000
432 0 0x00800000>;
433 };
434 };
436 pci2: pcie@e000a000 {
437 #address-cells = <3>;
438 #size-cells = <2>;
439 #interrupt-cells = <1>;
440 device_type = "pci";
441 compatible = "fsl,mpc8315-pcie", "fsl,mpc8314-pcie";
442 reg = <0xe000a000 0x00001000>;
443 ranges = <0x02000000 0 0xc0000000 0xc0000000 0 0x10000000
444 0x01000000 0 0x00000000 0xd1000000 0 0x00800000>;
445 bus-range = <0 255>;
446 interrupt-map-mask = <0xf800 0 0 7>;
447 interrupt-map = <0 0 0 1 &ipic 2 8
448 0 0 0 2 &ipic 2 8
449 0 0 0 3 &ipic 2 8
450 0 0 0 4 &ipic 2 8>;
451 clock-frequency = <0>;
453 pcie@0 {
454 #address-cells = <3>;
455 #size-cells = <2>;
456 device_type = "pci";
457 reg = <0 0 0 0 0>;
458 ranges = <0x02000000 0 0xc0000000
459 0x02000000 0 0xc0000000
460 0 0x10000000
461 0x01000000 0 0x00000000
462 0x01000000 0 0x00000000
463 0 0x00800000>;
464 };
465 };
467 leds {
468 compatible = "gpio-leds";
470 pwr {
471 gpios = <&mcu_pio 0 0>;
472 default-state = "on";
473 };
475 hdd {
476 gpios = <&mcu_pio 1 0>;
477 linux,default-trigger = "ide-disk";
478 };
479 };
480 };