x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / powerpc / boot / dts / mpc8349emitx.dts
blob2608679d0d4a4baa4072449717d8a67fdeb68608
1 /*
2  * MPC8349E-mITX Device Tree Source
3  *
4  * Copyright 2006 Freescale Semiconductor Inc.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms of the GNU General Public License as published by the
8  * Free Software Foundation; either version 2 of the License, or (at your
9  * option) any later version.
10  */
12 /dts-v1/;
14 / {
15         model = "MPC8349EMITX";
16         compatible = "MPC8349EMITX", "MPC834xMITX", "MPC83xxMITX";
17         #address-cells = <1>;
18         #size-cells = <1>;
20         aliases {
21                 ethernet0 = &enet0;
22                 ethernet1 = &enet1;
23                 serial0 = &serial0;
24                 serial1 = &serial1;
25                 pci0 = &pci0;
26                 pci1 = &pci1;
27         };
29         cpus {
30                 #address-cells = <1>;
31                 #size-cells = <0>;
33                 PowerPC,8349@0 {
34                         device_type = "cpu";
35                         reg = <0x0>;
36                         d-cache-line-size = <32>;
37                         i-cache-line-size = <32>;
38                         d-cache-size = <32768>;
39                         i-cache-size = <32768>;
40                         timebase-frequency = <0>;       // from bootloader
41                         bus-frequency = <0>;            // from bootloader
42                         clock-frequency = <0>;          // from bootloader
43                 };
44         };
46         memory {
47                 device_type = "memory";
48                 reg = <0x00000000 0x10000000>;
49         };
51         soc8349@e0000000 {
52                 #address-cells = <1>;
53                 #size-cells = <1>;
54                 device_type = "soc";
55                 compatible = "simple-bus";
56                 ranges = <0x0 0xe0000000 0x00100000>;
57                 reg = <0xe0000000 0x00000200>;
58                 bus-frequency = <0>;                    // from bootloader
60                 wdt@200 {
61                         device_type = "watchdog";
62                         compatible = "mpc83xx_wdt";
63                         reg = <0x200 0x100>;
64                 };
66                 gpio1: gpio-controller@c00 {
67                         #gpio-cells = <2>;
68                         compatible = "fsl,mpc8349-gpio";
69                         reg = <0xc00 0x100>;
70                         interrupts = <74 0x8>;
71                         interrupt-parent = <&ipic>;
72                         gpio-controller;
73                 };
75                 gpio2: gpio-controller@d00 {
76                         #gpio-cells = <2>;
77                         compatible = "fsl,mpc8349-gpio";
78                         reg = <0xd00 0x100>;
79                         interrupts = <75 0x8>;
80                         interrupt-parent = <&ipic>;
81                         gpio-controller;
82                 };
84                 i2c@3000 {
85                         #address-cells = <1>;
86                         #size-cells = <0>;
87                         cell-index = <0>;
88                         compatible = "fsl-i2c";
89                         reg = <0x3000 0x100>;
90                         interrupts = <14 0x8>;
91                         interrupt-parent = <&ipic>;
92                         dfsrr;
94                         eeprom: at24@50 {
95                                 compatible = "st-micro,24c256";
96                                 reg = <0x50>;
97                         };
99                 };
101                 i2c@3100 {
102                         #address-cells = <1>;
103                         #size-cells = <0>;
104                         cell-index = <1>;
105                         compatible = "fsl-i2c";
106                         reg = <0x3100 0x100>;
107                         interrupts = <15 0x8>;
108                         interrupt-parent = <&ipic>;
109                         dfsrr;
111                         rtc@68 {
112                                 compatible = "dallas,ds1339";
113                                 reg = <0x68>;
114                                 interrupts = <18 0x8>;
115                                 interrupt-parent = <&ipic>;
116                         };
118                         pcf1: iexp@38 {
119                                 #gpio-cells = <2>;
120                                 compatible = "ti,pcf8574a";
121                                 reg = <0x38>;
122                                 gpio-controller;
123                         };
125                         pcf2: iexp@39 {
126                                 #gpio-cells = <2>;
127                                 compatible = "ti,pcf8574a";
128                                 reg = <0x39>;
129                                 gpio-controller;
130                         };
132                         spd: at24@51 {
133                                 compatible = "at24,spd";
134                                 reg = <0x51>;
135                         };
137                         mcu_pio: mcu@a {
138                                 #gpio-cells = <2>;
139                                 compatible = "fsl,mc9s08qg8-mpc8349emitx",
140                                              "fsl,mcu-mpc8349emitx";
141                                 reg = <0x0a>;
142                                 gpio-controller;
143                         };
144                 };
146                 spi@7000 {
147                         cell-index = <0>;
148                         compatible = "fsl,spi";
149                         reg = <0x7000 0x1000>;
150                         interrupts = <16 0x8>;
151                         interrupt-parent = <&ipic>;
152                         mode = "cpu";
153                 };
155                 dma@82a8 {
156                         #address-cells = <1>;
157                         #size-cells = <1>;
158                         compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
159                         reg = <0x82a8 4>;
160                         ranges = <0 0x8100 0x1a8>;
161                         interrupt-parent = <&ipic>;
162                         interrupts = <71 8>;
163                         cell-index = <0>;
164                         dma-channel@0 {
165                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
166                                 reg = <0 0x80>;
167                                 cell-index = <0>;
168                                 interrupt-parent = <&ipic>;
169                                 interrupts = <71 8>;
170                         };
171                         dma-channel@80 {
172                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
173                                 reg = <0x80 0x80>;
174                                 cell-index = <1>;
175                                 interrupt-parent = <&ipic>;
176                                 interrupts = <71 8>;
177                         };
178                         dma-channel@100 {
179                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
180                                 reg = <0x100 0x80>;
181                                 cell-index = <2>;
182                                 interrupt-parent = <&ipic>;
183                                 interrupts = <71 8>;
184                         };
185                         dma-channel@180 {
186                                 compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
187                                 reg = <0x180 0x28>;
188                                 cell-index = <3>;
189                                 interrupt-parent = <&ipic>;
190                                 interrupts = <71 8>;
191                         };
192                 };
194                 usb@22000 {
195                         compatible = "fsl-usb2-mph";
196                         reg = <0x22000 0x1000>;
197                         #address-cells = <1>;
198                         #size-cells = <0>;
199                         interrupt-parent = <&ipic>;
200                         interrupts = <39 0x8>;
201                         phy_type = "ulpi";
202                         port0;
203                 };
205                 usb@23000 {
206                         compatible = "fsl-usb2-dr";
207                         reg = <0x23000 0x1000>;
208                         #address-cells = <1>;
209                         #size-cells = <0>;
210                         interrupt-parent = <&ipic>;
211                         interrupts = <38 0x8>;
212                         dr_mode = "peripheral";
213                         phy_type = "ulpi";
214                 };
216                 enet0: ethernet@24000 {
217                         #address-cells = <1>;
218                         #size-cells = <1>;
219                         cell-index = <0>;
220                         device_type = "network";
221                         model = "TSEC";
222                         compatible = "gianfar";
223                         reg = <0x24000 0x1000>;
224                         ranges = <0x0 0x24000 0x1000>;
225                         local-mac-address = [ 00 00 00 00 00 00 ];
226                         interrupts = <32 0x8 33 0x8 34 0x8>;
227                         interrupt-parent = <&ipic>;
228                         tbi-handle = <&tbi0>;
229                         phy-handle = <&phy1c>;
230                         linux,network-index = <0>;
232                         mdio@520 {
233                                 #address-cells = <1>;
234                                 #size-cells = <0>;
235                                 compatible = "fsl,gianfar-mdio";
236                                 reg = <0x520 0x20>;
238                                 /* Vitesse 8201 */
239                                 phy1c: ethernet-phy@1c {
240                                         interrupt-parent = <&ipic>;
241                                         interrupts = <18 0x8>;
242                                         reg = <0x1c>;
243                                         device_type = "ethernet-phy";
244                                 };
246                                 tbi0: tbi-phy@11 {
247                                         reg = <0x11>;
248                                         device_type = "tbi-phy";
249                                 };
250                         };
251                 };
253                 enet1: ethernet@25000 {
254                         #address-cells = <1>;
255                         #size-cells = <1>;
256                         cell-index = <1>;
257                         device_type = "network";
258                         model = "TSEC";
259                         compatible = "gianfar";
260                         reg = <0x25000 0x1000>;
261                         ranges = <0x0 0x25000 0x1000>;
262                         local-mac-address = [ 00 00 00 00 00 00 ];
263                         interrupts = <35 0x8 36 0x8 37 0x8>;
264                         interrupt-parent = <&ipic>;
265                         /* Vitesse 7385 isn't on the MDIO bus */
266                         fixed-link = <1 1 1000 0 0>;
267                         linux,network-index = <1>;
268                         tbi-handle = <&tbi1>;
270                         mdio@520 {
271                                 #address-cells = <1>;
272                                 #size-cells = <0>;
273                                 compatible = "fsl,gianfar-tbi";
274                                 reg = <0x520 0x20>;
276                                 tbi1: tbi-phy@11 {
277                                         reg = <0x11>;
278                                         device_type = "tbi-phy";
279                                 };
280                         };
281                 };
283                 serial0: serial@4500 {
284                         cell-index = <0>;
285                         device_type = "serial";
286                         compatible = "fsl,ns16550", "ns16550";
287                         reg = <0x4500 0x100>;
288                         clock-frequency = <0>;          // from bootloader
289                         interrupts = <9 0x8>;
290                         interrupt-parent = <&ipic>;
291                 };
293                 serial1: serial@4600 {
294                         cell-index = <1>;
295                         device_type = "serial";
296                         compatible = "fsl,ns16550", "ns16550";
297                         reg = <0x4600 0x100>;
298                         clock-frequency = <0>;          // from bootloader
299                         interrupts = <10 0x8>;
300                         interrupt-parent = <&ipic>;
301                 };
303                 crypto@30000 {
304                         compatible = "fsl,sec2.0";
305                         reg = <0x30000 0x10000>;
306                         interrupts = <11 0x8>;
307                         interrupt-parent = <&ipic>;
308                         fsl,num-channels = <4>;
309                         fsl,channel-fifo-len = <24>;
310                         fsl,exec-units-mask = <0x7e>;
311                         fsl,descriptor-types-mask = <0x01010ebf>;
312                 };
314                 ipic: pic@700 {
315                         interrupt-controller;
316                         #address-cells = <0>;
317                         #interrupt-cells = <2>;
318                         reg = <0x700 0x100>;
319                         device_type = "ipic";
320                 };
322                 gpio-leds {
323                         compatible = "gpio-leds";
325                         green {
326                                 label = "Green";
327                                 gpios = <&pcf1 0 1>;
328                                 linux,default-trigger = "heartbeat";
329                         };
331                         yellow {
332                                 label = "Yellow";
333                                 gpios = <&pcf1 1 1>;
334                                 /* linux,default-trigger = "heartbeat"; */
335                                 default-state = "on";
336                         };
337                 };
339         };
341         pci0: pci@e0008500 {
342                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
343                 interrupt-map = <
344                                 /* IDSEL 0x10 - SATA */
345                                 0x8000 0x0 0x0 0x1 &ipic 22 0x8 /* SATA_INTA */
346                                 >;
347                 interrupt-parent = <&ipic>;
348                 interrupts = <66 0x8>;
349                 bus-range = <0x0 0x0>;
350                 ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
351                           0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
352                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
353                 clock-frequency = <66666666>;
354                 #interrupt-cells = <1>;
355                 #size-cells = <2>;
356                 #address-cells = <3>;
357                 reg = <0xe0008500 0x100         /* internal registers */
358                        0xe0008300 0x8>;         /* config space access registers */
359                 compatible = "fsl,mpc8349-pci";
360                 device_type = "pci";
361         };
363         pci1: pci@e0008600 {
364                 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
365                 interrupt-map = <
366                                 /* IDSEL 0x0E - MiniPCI Slot */
367                                 0x7000 0x0 0x0 0x1 &ipic 21 0x8 /* PCI_INTA */
369                                 /* IDSEL 0x0F - PCI Slot */
370                                 0x7800 0x0 0x0 0x1 &ipic 20 0x8 /* PCI_INTA */
371                                 0x7800 0x0 0x0 0x2 &ipic 21 0x8 /* PCI_INTB */
372                                 >;
373                 interrupt-parent = <&ipic>;
374                 interrupts = <67 0x8>;
375                 bus-range = <0x0 0x0>;
376                 ranges = <0x42000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
377                           0x02000000 0x0 0xb0000000 0xb0000000 0x0 0x10000000
378                           0x01000000 0x0 0x00000000 0xe3000000 0x0 0x01000000>;
379                 clock-frequency = <66666666>;
380                 #interrupt-cells = <1>;
381                 #size-cells = <2>;
382                 #address-cells = <3>;
383                 reg = <0xe0008600 0x100         /* internal registers */
384                        0xe0008380 0x8>;         /* config space access registers */
385                 compatible = "fsl,mpc8349-pci";
386                 device_type = "pci";
387         };
389         localbus@e0005000 {
390                 #address-cells = <2>;
391                 #size-cells = <1>;
392                 compatible = "fsl,mpc8349e-localbus",
393                              "fsl,pq2pro-localbus",
394                              "simple-bus";
395                 reg = <0xe0005000 0xd8>;
396                 ranges = <0x0 0x0 0xfe000000 0x1000000  /* flash */
397                           0x1 0x0 0xf8000000 0x20000    /* VSC 7385 */
398                           0x2 0x0 0xf9000000 0x200000   /* exp slot */
399                           0x3 0x0 0xf0000000 0x210>;    /* CF slot */
401                 flash@0,0 {
402                         compatible = "cfi-flash";
403                         reg = <0x0      0x0 0x800000>;
404                         bank-width = <2>;
405                         device-width = <1>;
406                 };
408                 flash@0,800000 {
409                         #address-cells = <1>;
410                         #size-cells = <1>;
411                         compatible = "cfi-flash";
412                         reg = <0x0 0x800000 0x800000>;
413                         bank-width = <2>;
414                         device-width = <1>;
415                 };
417                 pata@3,0 {
418                         compatible = "fsl,mpc8349emitx-pata", "ata-generic";
419                         reg = <0x3 0x0 0x10 0x3 0x20c 0x4>;
420                         reg-shift = <1>;
421                         pio-mode = <6>;
422                         interrupts = <23 0x8>;
423                         interrupt-parent = <&ipic>;
424                 };
425         };