| blob | 7c3dde84d193f18c98a1a8d58e1baaaf3626c36f |
1 /*
2 * MPC8536DS Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 * * Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * * Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 * * Neither the name of Freescale Semiconductor nor the
14 * names of its contributors may be used to endorse or promote products
15 * derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
35 &lbc {
36 nor@0,0 {
37 #address-cells = <1>;
38 #size-cells = <1>;
39 compatible = "cfi-flash";
40 reg = <0x0 0x0 0x8000000>;
41 bank-width = <2>;
42 device-width = <1>;
44 partition@0 {
45 reg = <0x0 0x03000000>;
46 label = "ramdisk-nor";
47 };
49 partition@3000000 {
50 reg = <0x03000000 0x00e00000>;
51 label = "diagnostic-nor";
52 read-only;
53 };
55 partition@3e00000 {
56 reg = <0x03e00000 0x00200000>;
57 label = "dink-nor";
58 read-only;
59 };
61 partition@4000000 {
62 reg = <0x04000000 0x00400000>;
63 label = "kernel-nor";
64 };
66 partition@4400000 {
67 reg = <0x04400000 0x03b00000>;
68 label = "fs-nor";
69 };
71 partition@7f00000 {
72 reg = <0x07f00000 0x00080000>;
73 label = "dtb-nor";
74 };
76 partition@7f80000 {
77 reg = <0x07f80000 0x00080000>;
78 label = "u-boot-nor";
79 read-only;
80 };
81 };
83 nand@2,0 {
84 #address-cells = <1>;
85 #size-cells = <1>;
86 compatible = "fsl,mpc8536-fcm-nand",
87 "fsl,elbc-fcm-nand";
88 reg = <0x2 0x0 0x40000>;
90 partition@0 {
91 reg = <0x0 0x02000000>;
92 label = "u-boot-nand";
93 read-only;
94 };
96 partition@2000000 {
97 reg = <0x02000000 0x10000000>;
98 label = "fs-nand";
99 };
101 partition@12000000 {
102 reg = <0x12000000 0x08000000>;
103 label = "ramdisk-nand";
104 };
106 partition@1a000000 {
107 reg = <0x1a000000 0x04000000>;
108 label = "kernel-nand";
109 };
111 partition@1e000000 {
112 reg = <0x1e000000 0x01000000>;
113 label = "dtb-nand";
114 };
116 partition@1f000000 {
117 reg = <0x1f000000 0x21000000>;
118 label = "empty-nand";
119 };
120 };
122 board-control@3,0 {
123 compatible = "fsl,mpc8536ds-fpga-pixis";
124 reg = <0x3 0x0 0x8000>;
125 };
126 };
128 &board_soc {
129 i2c@3100 {
130 rtc@68 {
131 compatible = "dallas,ds3232";
132 reg = <0x68>;
133 interrupts = <0 0x1 0 0>;
134 };
135 adt7461@4c {
136 compatible = "adi,adt7461";
137 reg = <0x4c>;
138 };
139 };
141 spi@7000 {
142 flash@0 {
143 #address-cells = <1>;
144 #size-cells = <1>;
145 compatible = "spansion,s25sl12801";
146 reg = <0>;
147 spi-max-frequency = <40000000>;
148 partition@u-boot {
149 label = "u-boot";
150 reg = <0x00000000 0x00100000>;
151 read-only;
152 };
153 partition@kernel {
154 label = "kernel";
155 reg = <0x00100000 0x00500000>;
156 read-only;
157 };
158 partition@dtb {
159 label = "dtb";
160 reg = <0x00600000 0x00100000>;
161 read-only;
162 };
163 partition@fs {
164 label = "file system";
165 reg = <0x00700000 0x00900000>;
166 };
167 };
168 flash@1 {
169 compatible = "spansion,s25sl12801";
170 reg = <1>;
171 spi-max-frequency = <40000000>;
172 };
173 flash@2 {
174 compatible = "spansion,s25sl12801";
175 reg = <2>;
176 spi-max-frequency = <40000000>;
177 };
178 flash@3 {
179 compatible = "spansion,s25sl12801";
180 reg = <3>;
181 spi-max-frequency = <40000000>;
182 };
183 };
185 usb@22000 {
186 phy_type = "ulpi";
187 };
189 usb@23000 {
190 phy_type = "ulpi";
191 };
193 enet0: ethernet@24000 {
194 tbi-handle = <&tbi0>;
195 phy-handle = <&phy1>;
196 phy-connection-type = "rgmii-id";
197 };
199 mdio@24520 {
200 phy0: ethernet-phy@0 {
201 interrupts = <10 0x1 0 0>;
202 reg = <0>;
203 device_type = "ethernet-phy";
204 };
205 phy1: ethernet-phy@1 {
206 interrupts = <10 0x1 0 0>;
207 reg = <1>;
208 device_type = "ethernet-phy";
209 };
210 sgmii_phy0: sgmii-phy@0 {
211 interrupts = <6 1 0 0>;
212 reg = <0x1d>;
213 };
214 sgmii_phy1: sgmii-phy@1 {
215 interrupts = <6 1 0 0>;
216 reg = <0x1c>;
217 };
218 tbi0: tbi-phy@11 {
219 reg = <0x11>;
220 device_type = "tbi-phy";
221 };
222 };
224 enet2: ethernet@26000 {
225 tbi-handle = <&tbi1>;
226 phy-handle = <&phy0>;
227 phy-connection-type = "rgmii-id";
228 };
230 mdio@26520 {
231 #address-cells = <1>;
232 #size-cells = <0>;
233 compatible = "fsl,gianfar-tbi";
234 reg = <0x26520 0x20>;
236 tbi1: tbi-phy@11 {
237 reg = <0x11>;
238 device_type = "tbi-phy";
239 };
240 };
242 usb@2b000 {
243 dr_mode = "peripheral";
244 phy_type = "ulpi";
245 };
246 };