x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / powerpc / boot / dts / p1010rdb.dtsi
blobec7c27a646711c176ba3cd1a51cf5d5e9b9d37b7
1 /*
2  * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
3  *
4  * Copyright 2011 Freescale Semiconductor Inc.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *     * Redistributions of source code must retain the above copyright
9  *       notice, this list of conditions and the following disclaimer.
10  *     * Redistributions in binary form must reproduce the above copyright
11  *       notice, this list of conditions and the following disclaimer in the
12  *       documentation and/or other materials provided with the distribution.
13  *     * Neither the name of Freescale Semiconductor nor the
14  *       names of its contributors may be used to endorse or promote products
15  *       derived from this software without specific prior written permission.
16  *
17  *
18  * ALTERNATIVELY, this software may be distributed under the terms of the
19  * GNU General Public License ("GPL") as published by the Free Software
20  * Foundation, either version 2 of that License or (at your option) any
21  * later version.
22  *
23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33  */
35 &board_ifc {
36         nor@0,0 {
37                 #address-cells = <1>;
38                 #size-cells = <1>;
39                 compatible = "cfi-flash";
40                 reg = <0x0 0x0 0x2000000>;
41                 bank-width = <2>;
42                 device-width = <1>;
44                 partition@40000 {
45                         /* 256KB for DTB Image */
46                         reg = <0x00040000 0x00040000>;
47                         label = "NOR DTB Image";
48                 };
50                 partition@80000 {
51                         /* 7 MB for Linux Kernel Image */
52                         reg = <0x00080000 0x00700000>;
53                         label = "NOR Linux Kernel Image";
54                 };
56                 partition@800000 {
57                         /* 20MB for JFFS2 based Root file System */
58                         reg = <0x00800000 0x01400000>;
59                         label = "NOR JFFS2 Root File System";
60                 };
62                 partition@1f00000 {
63                         /* This location must not be altered  */
64                         /* 512KB for u-boot Bootloader Image */
65                         /* 512KB for u-boot Environment Variables */
66                         reg = <0x01f00000 0x00100000>;
67                         label = "NOR U-Boot Image";
68                         read-only;
69                 };
70         };
72         nand@1,0 {
73                 #address-cells = <1>;
74                 #size-cells = <1>;
75                 compatible = "fsl,ifc-nand";
76                 reg = <0x1 0x0 0x10000>;
78                 partition@0 {
79                         /* This location must not be altered  */
80                         /* 1MB for u-boot Bootloader Image */
81                         reg = <0x0 0x00100000>;
82                         label = "NAND U-Boot Image";
83                         read-only;
84                 };
86                 partition@100000 {
87                         /* 1MB for DTB Image */
88                         reg = <0x00100000 0x00100000>;
89                         label = "NAND DTB Image";
90                 };
92                 partition@200000 {
93                         /* 4MB for Linux Kernel Image */
94                         reg = <0x00200000 0x00400000>;
95                         label = "NAND Linux Kernel Image";
96                 };
98                 partition@600000 {
99                         /* 4MB for Compressed Root file System Image */
100                         reg = <0x00600000 0x00400000>;
101                         label = "NAND Compressed RFS Image";
102                 };
104                 partition@a00000 {
105                         /* 15MB for JFFS2 based Root file System */
106                         reg = <0x00a00000 0x00f00000>;
107                         label = "NAND JFFS2 Root File System";
108                 };
110                 partition@1900000 {
111                         /* 7MB for User Area */
112                         reg = <0x01900000 0x00700000>;
113                         label = "NAND User area";
114                 };
115         };
117         cpld@3,0 {
118                 #address-cells = <1>;
119                 #size-cells = <1>;
120                 compatible = "fsl,p1010rdb-cpld";
121                 reg = <0x3 0x0 0x0000020>;
122                 bank-width = <1>;
123                 device-width = <1>;
124         };
127 &board_soc {
128         i2c@3000 {
129                 eeprom@50 {
130                         compatible = "st,24c256";
131                         reg = <0x50>;
132                 };
134                 rtc@68 {
135                         compatible = "pericom,pt7c4338";
136                         reg = <0x68>;
137                 };
138         };
140         i2c@3100 {
141                 eeprom@52 {
142                         compatible = "atmel,24c01";
143                         reg = <0x52>;
144                 };
145         };
147         spi@7000 {
148                 flash@0 {
149                         #address-cells = <1>;
150                         #size-cells = <1>;
151                         compatible = "spansion,s25sl12801";
152                         reg = <0>;
153                         spi-max-frequency = <40000000>;
155                         partition@0 {
156                                 /* 1MB for u-boot Bootloader Image */
157                                 /* 1MB for Environment */
158                                 reg = <0x0 0x00100000>;
159                                 label = "SPI Flash U-Boot Image";
160                                 read-only;
161                         };
163                         partition@100000 {
164                                 /* 512KB for DTB Image */
165                                 reg = <0x00100000 0x00080000>;
166                                 label = "SPI Flash DTB Image";
167                         };
169                         partition@180000 {
170                                 /* 4MB for Linux Kernel Image */
171                                 reg = <0x00180000 0x00400000>;
172                                 label = "SPI Flash Linux Kernel Image";
173                         };
175                         partition@580000 {
176                                 /* 4MB for Compressed RFS Image */
177                                 reg = <0x00580000 0x00400000>;
178                                 label = "SPI Flash Compressed RFSImage";
179                         };
181                         partition@980000 {
182                                 /* 6.5MB for JFFS2 based RFS */
183                                 reg = <0x00980000 0x00680000>;
184                                 label = "SPI Flash JFFS2 RFS";
185                         };
186                 };
187         };
189         usb@22000 {
190                 phy_type = "utmi";
191                 dr_mode = "host";
192         };
194         mdio@24000 {
195                 phy0: ethernet-phy@0 {
196                         interrupts = <3 1 0 0>;
197                         reg = <0x1>;
198                 };
200                 phy1: ethernet-phy@1 {
201                         interrupts = <2 1 0 0>;
202                         reg = <0x0>;
203                 };
205                 phy2: ethernet-phy@2 {
206                         interrupts = <2 1 0 0>;
207                         reg = <0x2>;
208                 };
210                 tbi-phy@3 {
211                         device_type = "tbi-phy";
212                         reg = <0x3>;
213                 };
214         };
216         mdio@25000 {
217                 tbi0: tbi-phy@11 {
218                         reg = <0x11>;
219                         device_type = "tbi-phy";
220                 };
221         };
223         mdio@26000 {
224                 tbi1: tbi-phy@11 {
225                         reg = <0x11>;
226                         device_type = "tbi-phy";
227                 };
228         };
230         enet0: ethernet@b0000 {
231                 phy-handle = <&phy0>;
232                 phy-connection-type = "rgmii-id";
233         };
235         enet1: ethernet@b1000 {
236                 phy-handle = <&phy1>;
237                 tbi-handle = <&tbi0>;
238                 phy-connection-type = "sgmii";
239         };
241         enet2: ethernet@b2000 {
242                 phy-handle = <&phy2>;
243                 tbi-handle = <&tbi1>;
244                 phy-connection-type = "sgmii";
245         };