arch/powerpc/boot/dts/p1020rdb-pd.dts

   1 /*
   2  * P1020 RDB-PD Device Tree Source (32-bit address map)
   3  *
   4  * Copyright 2013 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "fsl/p1020si-pre.dtsi"
  36 / {
  37         model = "fsl,P1020RDB-PD";
  38         compatible = "fsl,P1020RDB-PD";
  39
  40         memory {
  41                 device_type = "memory";
  42         };
  43
  44         lbc: localbus@ffe05000 {
  45                 reg = <0x0 0xffe05000 0x0 0x1000>;
  46
  47                 /* NOR, NAND flash, L2 switch and CPLD */
  48                 ranges = <0x0 0x0 0x0 0xec000000 0x04000000
  49                           0x1 0x0 0x0 0xff800000 0x00040000
  50                           0x2 0x0 0x0 0xffa00000 0x00020000
  51                           0x3 0x0 0x0 0xffb00000 0x00020000>;
  52
  53                 nor@0,0 {
  54                         #address-cells = <1>;
  55                         #size-cells = <1>;
  56                         compatible = "cfi-flash";
  57                         reg = <0x0 0x0 0x4000000>;
  58                         bank-width = <2>;
  59                         device-width = <1>;
  60
  61                         partition@0 {
  62                                 /* 128KB for DTB Image */
  63                                 reg = <0x0 0x00020000>;
  64                                 label = "NOR DTB Image";
  65                         };
  66
  67                         partition@20000 {
  68                                 /* 3.875 MB for Linux Kernel Image */
  69                                 reg = <0x00020000 0x003e0000>;
  70                                 label = "NOR Linux Kernel Image";
  71                         };
  72
  73                         partition@400000 {
  74                                 /* 58MB for Root file System */
  75                                 reg = <0x00400000 0x03a00000>;
  76                                 label = "NOR Root File System";
  77                         };
  78
  79                         partition@3e00000 {
  80                                 /* This location must not be altered  */
  81                                 /* 1M for Vitesse 7385 Switch firmware */
  82                                 reg = <0x3e00000 0x00100000>;
  83                                 label = "NOR Vitesse-7385 Firmware";
  84                                 read-only;
  85                         };
  86
  87                         partition@3f00000 {
  88                                 /* This location must not be altered  */
  89                                 /* 512KB for u-boot Bootloader Image */
  90                                 /* 512KB for u-boot Environment Variables */
  91                                 reg = <0x03f00000 0x00100000>;
  92                                 label = "NOR U-Boot Image";
  93                                 read-only;
  94                         };
  95                 };
  96
  97                 nand@1,0 {
  98                         #address-cells = <1>;
  99                         #size-cells = <1>;
 100                         compatible = "fsl,p1020-fcm-nand",
 101                                      "fsl,elbc-fcm-nand";
 102                         reg = <0x1 0x0 0x40000>;
 103
 104                         partition@0 {
 105                                 /* This location must not be altered  */
 106                                 /* 1MB for u-boot Bootloader Image */
 107                                 reg = <0x0 0x00100000>;
 108                                 label = "NAND U-Boot Image";
 109                                 read-only;
 110                         };
 111
 112                         partition@100000 {
 113                                 /* 1MB for DTB Image */
 114                                 reg = <0x00100000 0x00100000>;
 115                                 label = "NAND DTB Image";
 116                         };
 117
 118                         partition@200000 {
 119                                 /* 4MB for Linux Kernel Image */
 120                                 reg = <0x00200000 0x00400000>;
 121                                 label = "NAND Linux Kernel Image";
 122                         };
 123
 124                         partition@600000 {
 125                                 /* 122MB for File System Image */
 126                                 reg = <0x00600000 0x07a00000>;
 127                                 label = "NAND File System Image";
 128                         };
 129                 };
 130
 131                 cpld@2,0 {
 132                         compatible = "fsl,p1020rdb-pd-cpld";
 133                         reg = <0x2 0x0 0x20000>;
 134                 };
 135
 136                 L2switch@3,0 {
 137                         #address-cells = <1>;
 138                         #size-cells = <1>;
 139                         compatible = "vitesse-7385";
 140                         reg = <0x3 0x0 0x20000>;
 141                 };
 142         };
 143
 144         soc: soc@ffe00000 {
 145                 ranges = <0x0 0x0 0xffe00000 0x100000>;
 146
 147                 i2c@3000 {
 148                         rtc@68 {
 149                                 compatible = "dallas,ds1339";
 150                                 reg = <0x68>;
 151                         };
 152                 };
 153
 154                 spi@7000 {
 155                         flash@0 {
 156                                 #address-cells = <1>;
 157                                 #size-cells = <1>;
 158                                 compatible = "spansion,s25sl12801";
 159                                 reg = <0>;
 160                                 /* input clock */
 161                                 spi-max-frequency = <40000000>;
 162
 163                                 partition@0 {
 164                                         /* 512KB for u-boot Bootloader Image */
 165                                         reg = <0x0 0x00080000>;
 166                                         label = "SPI U-Boot Image";
 167                                         read-only;
 168                                 };
 169
 170                                 partition@80000 {
 171                                         /* 512KB for DTB Image*/
 172                                         reg = <0x00080000 0x00080000>;
 173                                         label = "SPI DTB Image";
 174                                 };
 175
 176                                 partition@100000 {
 177                                         /* 4MB for Linux Kernel Image */
 178                                         reg = <0x00100000 0x00400000>;
 179                                         label = "SPI Linux Kernel Image";
 180                                 };
 181
 182                                 partition@500000 {
 183                                         /* 11MB for FS System Image */
 184                                         reg = <0x00500000 0x00b00000>;
 185                                         label = "SPI File System Image";
 186                                 };
 187                         };
 188
 189                         slic@0 {
 190                                 compatible = "zarlink,le88266";
 191                                 reg = <1>;
 192                                 spi-max-frequency = <8000000>;
 193                         };
 194
 195                         slic@1 {
 196                                 compatible = "zarlink,le88266";
 197                                 reg = <2>;
 198                                 spi-max-frequency = <8000000>;
 199                         };
 200                 };
 201
 202                 mdio@24000 {
 203                         phy0: ethernet-phy@0 {
 204                                 interrupts = <3 1 0 0>;
 205                                 reg = <0x0>;
 206                         };
 207
 208                         phy1: ethernet-phy@1 {
 209                                 interrupts = <2 1 0 0>;
 210                                 reg = <0x1>;
 211                         };
 212                 };
 213
 214                 mdio@25000 {
 215                         tbi1: tbi-phy@11 {
 216                                 reg = <0x11>;
 217                                 device_type = "tbi-phy";
 218                         };
 219                 };
 220
 221                 mdio@26000 {
 222                         tbi2: tbi-phy@11 {
 223                                 reg = <0x11>;
 224                                 device_type = "tbi-phy";
 225                         };
 226                 };
 227
 228                 enet0: ethernet@b0000 {
 229                         fixed-link = <1 1 1000 0 0>;
 230                         phy-connection-type = "rgmii-id";
 231                 };
 232
 233                 enet1: ethernet@b1000 {
 234                         phy-handle = <&phy0>;
 235                         tbi-handle = <&tbi1>;
 236                         phy-connection-type = "sgmii";
 237                 };
 238
 239                 enet2: ethernet@b2000 {
 240                         phy-handle = <&phy1>;
 241                         phy-connection-type = "rgmii-id";
 242                 };
 243
 244                 usb@22000 {
 245                         phy_type = "ulpi";
 246                 };
 247         };
 248
 249         pci0: pcie@ffe09000 {
 250                 reg = <0x0 0xffe09000 0x0 0x1000>;
 251                 ranges = <0x2000000 0x0 0xa0000000 0x0 0xa0000000 0x0 0x20000000
 252                           0x1000000 0x0 0x00000000 0x0 0xffc10000 0x0 0x10000>;
 253                 pcie@0 {
 254                         ranges = <0x2000000 0x0 0xa0000000
 255                                   0x2000000 0x0 0xa0000000
 256                                   0x0 0x20000000
 257
 258                                   0x1000000 0x0 0x0
 259                                   0x1000000 0x0 0x0
 260                                   0x0 0x100000>;
 261                 };
 262         };
 263
 264         pci1: pcie@ffe0a000 {
 265                 reg = <0x0 0xffe0a000 0x0 0x1000>;
 266                 ranges = <0x2000000 0x0 0x80000000 0x0 0x80000000 0x0 0x20000000
 267                           0x1000000 0x0 0x00000000 0x0 0xffc00000 0x0 0x10000>;
 268                 pcie@0 {
 269                         ranges = <0x2000000 0x0 0x80000000
 270                                   0x2000000 0x0 0x80000000
 271                                   0x0 0x20000000
 272
 273                                   0x1000000 0x0 0x0
 274                                   0x1000000 0x0 0x0
 275                                   0x0 0x100000>;
 276                 };
 277         };
 278 };
 279
 280 /include/ "fsl/p1020si-post.dtsi"