x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / powerpc / boot / dts / p1020rdb.dtsi
blob1fb7e0e0940f0cb098843b78207c6117efeffab7
1 /*
2  * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
3  *
4  * Copyright 2011-2012 Freescale Semiconductor Inc.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *     * Redistributions of source code must retain the above copyright
9  *       notice, this list of conditions and the following disclaimer.
10  *     * Redistributions in binary form must reproduce the above copyright
11  *       notice, this list of conditions and the following disclaimer in the
12  *       documentation and/or other materials provided with the distribution.
13  *     * Neither the name of Freescale Semiconductor nor the
14  *       names of its contributors may be used to endorse or promote products
15  *       derived from this software without specific prior written permission.
16  *
17  *
18  * ALTERNATIVELY, this software may be distributed under the terms of the
19  * GNU General Public License ("GPL") as published by the Free Software
20  * Foundation, either version 2 of that License or (at your option) any
21  * later version.
22  *
23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33  */
35 &board_lbc {
36         nor@0,0 {
37                 #address-cells = <1>;
38                 #size-cells = <1>;
39                 compatible = "cfi-flash";
40                 reg = <0x0 0x0 0x1000000>;
41                 bank-width = <2>;
42                 device-width = <1>;
44                 partition@0 {
45                         /* This location must not be altered  */
46                         /* 256KB for Vitesse 7385 Switch firmware */
47                         reg = <0x0 0x00040000>;
48                         label = "NOR (RO) Vitesse-7385 Firmware";
49                         read-only;
50                 };
52                 partition@40000 {
53                         /* 256KB for DTB Image */
54                         reg = <0x00040000 0x00040000>;
55                         label = "NOR (RO) DTB Image";
56                         read-only;
57                 };
59                 partition@80000 {
60                         /* 3.5 MB for Linux Kernel Image */
61                         reg = <0x00080000 0x00380000>;
62                         label = "NOR (RO) Linux Kernel Image";
63                         read-only;
64                 };
66                 partition@400000 {
67                         /* 11MB for JFFS2 based Root file System */
68                         reg = <0x00400000 0x00b00000>;
69                         label = "NOR (RW) JFFS2 Root File System";
70                 };
72                 partition@f00000 {
73                         /* This location must not be altered  */
74                         /* 512KB for u-boot Bootloader Image */
75                         /* 512KB for u-boot Environment Variables */
76                         reg = <0x00f00000 0x00100000>;
77                         label = "NOR (RO) U-Boot Image";
78                         read-only;
79                 };
80         };
82         nand@1,0 {
83                 #address-cells = <1>;
84                 #size-cells = <1>;
85                 compatible = "fsl,p1020-fcm-nand",
86                              "fsl,elbc-fcm-nand";
87                 reg = <0x1 0x0 0x40000>;
89                 partition@0 {
90                         /* This location must not be altered  */
91                         /* 1MB for u-boot Bootloader Image */
92                         reg = <0x0 0x00100000>;
93                         label = "NAND (RO) U-Boot Image";
94                         read-only;
95                 };
97                 partition@100000 {
98                         /* 1MB for DTB Image */
99                         reg = <0x00100000 0x00100000>;
100                         label = "NAND (RO) DTB Image";
101                         read-only;
102                 };
104                 partition@200000 {
105                         /* 4MB for Linux Kernel Image */
106                         reg = <0x00200000 0x00400000>;
107                         label = "NAND (RO) Linux Kernel Image";
108                         read-only;
109                 };
111                 partition@600000 {
112                         /* 4MB for Compressed Root file System Image */
113                         reg = <0x00600000 0x00400000>;
114                         label = "NAND (RO) Compressed RFS Image";
115                         read-only;
116                 };
118                 partition@a00000 {
119                         /* 7MB for JFFS2 based Root file System */
120                         reg = <0x00a00000 0x00700000>;
121                         label = "NAND (RW) JFFS2 Root File System";
122                 };
124                 partition@1100000 {
125                         /* 15MB for JFFS2 based Root file System */
126                         reg = <0x01100000 0x00f00000>;
127                         label = "NAND (RW) Writable User area";
128                 };
129         };
131         L2switch@2,0 {
132                 #address-cells = <1>;
133                 #size-cells = <1>;
134                 compatible = "vitesse-7385";
135                 reg = <0x2 0x0 0x20000>;
136         };
139 &board_soc {
140         i2c@3000 {
141                 rtc@68 {
142                         compatible = "dallas,ds1339";
143                         reg = <0x68>;
144                 };
145         };
147         spi@7000 {
148                 flash@0 {
149                         #address-cells = <1>;
150                         #size-cells = <1>;
151                         compatible = "spansion,s25sl12801";
152                         reg = <0>;
153                         spi-max-frequency = <40000000>; /* input clock */
155                         partition@u-boot {
156                                 /* 512KB for u-boot Bootloader Image */
157                                 reg = <0x0 0x00080000>;
158                                 label = "u-boot";
159                                 read-only;
160                         };
162                         partition@dtb {
163                                 /* 512KB for DTB Image */
164                                 reg = <0x00080000 0x00080000>;
165                                 label = "dtb";
166                                 read-only;
167                         };
169                         partition@kernel {
170                                 /* 4MB for Linux Kernel Image */
171                                 reg = <0x00100000 0x00400000>;
172                                 label = "kernel";
173                                 read-only;
174                         };
176                         partition@fs {
177                                 /* 4MB for Compressed RFS Image */
178                                 reg = <0x00500000 0x00400000>;
179                                 label = "file system";
180                                 read-only;
181                         };
183                         partition@jffs-fs {
184                                 /* 7MB for JFFS2 based RFS */
185                                 reg = <0x00900000 0x00700000>;
186                                 label = "file system jffs2";
187                         };
188                 };
189         };
191         usb@22000 {
192                 phy_type = "ulpi";
193                 dr_mode = "host";
194         };
196         /* USB2 is shared with localbus. It is used
197            only in case of SPI and SD boot after
198            appropriate device-tree fixup done by uboot */
199         usb@23000 {
200                 phy_type = "ulpi";
201                 dr_mode = "host";
202         };
204         mdio@24000 {
205                 phy0: ethernet-phy@0 {
206                         interrupt-parent = <&mpic>;
207                         interrupts = <3 1>;
208                         reg = <0x0>;
209                 };
211                 phy1: ethernet-phy@1 {
212                         interrupt-parent = <&mpic>;
213                         interrupts = <2 1>;
214                         reg = <0x1>;
215                 };
217                 tbi-phy@2 {
218                         device_type = "tbi-phy";
219                         reg = <0x2>;
220                 };
221         };
223         mdio@25000 {
224                 tbi0: tbi-phy@11 {
225                         reg = <0x11>;
226                         device_type = "tbi-phy";
227                 };
228         };
230         enet0: ethernet@b0000 {
231                 fixed-link = <1 1 1000 0 0>;
232                 phy-connection-type = "rgmii-id";
234         };
236         enet1: ethernet@b1000 {
237                 phy-handle = <&phy0>;
238                 tbi-handle = <&tbi0>;
239                 phy-connection-type = "sgmii";
240         };
242         enet2: ethernet@b2000 {
243                 phy-handle = <&phy1>;
244                 phy-connection-type = "rgmii-id";
245         };