arch/powerpc/boot/dts/p3041ds.dts

   1 /*
   2  * P3041DS Device Tree Source
   3  *
   4  * Copyright 2010-2011 Freescale Semiconductor Inc.
   5  *
   6  * Redistribution and use in source and binary forms, with or without
   7  * modification, are permitted provided that the following conditions are met:
   8  *     * Redistributions of source code must retain the above copyright
   9  *       notice, this list of conditions and the following disclaimer.
  10  *     * Redistributions in binary form must reproduce the above copyright
  11  *       notice, this list of conditions and the following disclaimer in the
  12  *       documentation and/or other materials provided with the distribution.
  13  *     * Neither the name of Freescale Semiconductor nor the
  14  *       names of its contributors may be used to endorse or promote products
  15  *       derived from this software without specific prior written permission.
  16  *
  17  *
  18  * ALTERNATIVELY, this software may be distributed under the terms of the
  19  * GNU General Public License ("GPL") as published by the Free Software
  20  * Foundation, either version 2 of that License or (at your option) any
  21  * later version.
  22  *
  23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
  24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
  27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  33  */
  34
  35 /include/ "fsl/p3041si-pre.dtsi"
  36
  37 / {
  38         model = "fsl,P3041DS";
  39         compatible = "fsl,P3041DS";
  40         #address-cells = <2>;
  41         #size-cells = <2>;
  42         interrupt-parent = <&mpic>;
  43
  44         memory {
  45                 device_type = "memory";
  46         };
  47
  48         dcsr: dcsr@f00000000 {
  49                 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
  50         };
  51
  52         soc: soc@ffe000000 {
  53                 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
  54                 reg = <0xf 0xfe000000 0 0x00001000>;
  55                 spi@110000 {
  56                         flash@0 {
  57                                 #address-cells = <1>;
  58                                 #size-cells = <1>;
  59                                 compatible = "spansion,s25sl12801";
  60                                 reg = <0>;
  61                                 spi-max-frequency = <35000000>; /* input clock */
  62                                 partition@u-boot {
  63                                         label = "u-boot";
  64                                         reg = <0x00000000 0x00100000>;
  65                                         read-only;
  66                                 };
  67                                 partition@kernel {
  68                                         label = "kernel";
  69                                         reg = <0x00100000 0x00500000>;
  70                                         read-only;
  71                                 };
  72                                 partition@dtb {
  73                                         label = "dtb";
  74                                         reg = <0x00600000 0x00100000>;
  75                                         read-only;
  76                                 };
  77                                 partition@fs {
  78                                         label = "file system";
  79                                         reg = <0x00700000 0x00900000>;
  80                                 };
  81                         };
  82                 };
  83
  84                 i2c@118100 {
  85                         eeprom@51 {
  86                                 compatible = "at24,24c256";
  87                                 reg = <0x51>;
  88                         };
  89                         eeprom@52 {
  90                                 compatible = "at24,24c256";
  91                                 reg = <0x52>;
  92                         };
  93                 };
  94
  95                 i2c@119100 {
  96                         rtc@68 {
  97                                 compatible = "dallas,ds3232";
  98                                 reg = <0x68>;
  99                                 interrupts = <0x1 0x1 0 0>;
 100                         };
 101                         adt7461@4c {
 102                                 compatible = "adi,adt7461";
 103                                 reg = <0x4c>;
 104                         };
 105                 };
 106         };
 107
 108         rio: rapidio@ffe0c0000 {
 109                 reg = <0xf 0xfe0c0000 0 0x11000>;
 110
 111                 port1 {
 112                         ranges = <0 0 0xc 0x20000000 0 0x10000000>;
 113                 };
 114                 port2 {
 115                         ranges = <0 0 0xc 0x30000000 0 0x10000000>;
 116                 };
 117         };
 118
 119         lbc: localbus@ffe124000 {
 120                 reg = <0xf 0xfe124000 0 0x1000>;
 121                 ranges = <0 0 0xf 0xe8000000 0x08000000
 122                           2 0 0xf 0xffa00000 0x00040000
 123                           3 0 0xf 0xffdf0000 0x00008000>;
 124
 125                 flash@0,0 {
 126                         compatible = "cfi-flash";
 127                         reg = <0 0 0x08000000>;
 128                         bank-width = <2>;
 129                         device-width = <2>;
 130                 };
 131
 132                 nand@2,0 {
 133                         #address-cells = <1>;
 134                         #size-cells = <1>;
 135                         compatible = "fsl,elbc-fcm-nand";
 136                         reg = <0x2 0x0 0x40000>;
 137
 138                         partition@0 {
 139                                 label = "NAND U-Boot Image";
 140                                 reg = <0x0 0x02000000>;
 141                                 read-only;
 142                         };
 143
 144                         partition@2000000 {
 145                                 label = "NAND Root File System";
 146                                 reg = <0x02000000 0x10000000>;
 147                         };
 148
 149                         partition@12000000 {
 150                                 label = "NAND Compressed RFS Image";
 151                                 reg = <0x12000000 0x08000000>;
 152                         };
 153
 154                         partition@1a000000 {
 155                                 label = "NAND Linux Kernel Image";
 156                                 reg = <0x1a000000 0x04000000>;
 157                         };
 158
 159                         partition@1e000000 {
 160                                 label = "NAND DTB Image";
 161                                 reg = <0x1e000000 0x01000000>;
 162                         };
 163
 164                         partition@1f000000 {
 165                                 label = "NAND Writable User area";
 166                                 reg = <0x1f000000 0x21000000>;
 167                         };
 168                 };
 169
 170                 board-control@3,0 {
 171                         compatible = "fsl,p3041ds-fpga", "fsl,fpga-ngpixis";
 172                         reg = <3 0 0x30>;
 173                 };
 174         };
 175
 176         pci0: pcie@ffe200000 {
 177                 reg = <0xf 0xfe200000 0 0x1000>;
 178                 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
 179                           0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
 180                 pcie@0 {
 181                         ranges = <0x02000000 0 0xe0000000
 182                                   0x02000000 0 0xe0000000
 183                                   0 0x20000000
 184
 185                                   0x01000000 0 0x00000000
 186                                   0x01000000 0 0x00000000
 187                                   0 0x00010000>;
 188                 };
 189         };
 190
 191         pci1: pcie@ffe201000 {
 192                 reg = <0xf 0xfe201000 0 0x1000>;
 193                 ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
 194                           0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
 195                 pcie@0 {
 196                         ranges = <0x02000000 0 0xe0000000
 197                                   0x02000000 0 0xe0000000
 198                                   0 0x20000000
 199
 200                                   0x01000000 0 0x00000000
 201                                   0x01000000 0 0x00000000
 202                                   0 0x00010000>;
 203                 };
 204         };
 205
 206         pci2: pcie@ffe202000 {
 207                 reg = <0xf 0xfe202000 0 0x1000>;
 208                 ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
 209                           0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
 210                 pcie@0 {
 211                         ranges = <0x02000000 0 0xe0000000
 212                                   0x02000000 0 0xe0000000
 213                                   0 0x20000000
 214
 215                                   0x01000000 0 0x00000000
 216                                   0x01000000 0 0x00000000
 217                                   0 0x00010000>;
 218                 };
 219         };
 220
 221         pci3: pcie@ffe203000 {
 222                 reg = <0xf 0xfe203000 0 0x1000>;
 223                 ranges = <0x02000000 0 0xe0000000 0xc 0x60000000 0 0x20000000
 224                           0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
 225                 pcie@0 {
 226                         ranges = <0x02000000 0 0xe0000000
 227                                   0x02000000 0 0xe0000000
 228                                   0 0x20000000
 229
 230                                   0x01000000 0 0x00000000
 231                                   0x01000000 0 0x00000000
 232                                   0 0x00010000>;
 233                 };
 234         };
 235 };
 236
 237 /include/ "fsl/p3041si-post.dtsi"