x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / tile / kernel / process.c
blob16ed58948757565639d93dc0417b69ea17269b68
1 /*
2 * Copyright 2010 Tilera Corporation. All Rights Reserved.
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation, version 2.
8 * This program is distributed in the hope that it will be useful, but
9 * WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
11 * NON INFRINGEMENT. See the GNU General Public License for
12 * more details.
15 #include <linux/sched.h>
16 #include <linux/preempt.h>
17 #include <linux/module.h>
18 #include <linux/fs.h>
19 #include <linux/kprobes.h>
20 #include <linux/elfcore.h>
21 #include <linux/tick.h>
22 #include <linux/init.h>
23 #include <linux/mm.h>
24 #include <linux/compat.h>
25 #include <linux/hardirq.h>
26 #include <linux/syscalls.h>
27 #include <linux/kernel.h>
28 #include <linux/tracehook.h>
29 #include <linux/signal.h>
30 #include <asm/stack.h>
31 #include <asm/switch_to.h>
32 #include <asm/homecache.h>
33 #include <asm/syscalls.h>
34 #include <asm/traps.h>
35 #include <asm/setup.h>
36 #include <asm/uaccess.h>
37 #ifdef CONFIG_HARDWALL
38 #include <asm/hardwall.h>
39 #endif
40 #include <arch/chip.h>
41 #include <arch/abi.h>
42 #include <arch/sim_def.h>
45 * Use the (x86) "idle=poll" option to prefer low latency when leaving the
46 * idle loop over low power while in the idle loop, e.g. if we have
47 * one thread per core and we want to get threads out of futex waits fast.
49 static int __init idle_setup(char *str)
51 if (!str)
52 return -EINVAL;
54 if (!strcmp(str, "poll")) {
55 pr_info("using polling idle threads.\n");
56 cpu_idle_poll_ctrl(true);
57 return 0;
58 } else if (!strcmp(str, "halt")) {
59 return 0;
61 return -1;
63 early_param("idle", idle_setup);
65 void arch_cpu_idle(void)
67 __get_cpu_var(irq_stat).idle_timestamp = jiffies;
68 _cpu_idle();
72 * Release a thread_info structure
74 void arch_release_thread_info(struct thread_info *info)
76 struct single_step_state *step_state = info->step_state;
78 if (step_state) {
81 * FIXME: we don't munmap step_state->buffer
82 * because the mm_struct for this process (info->task->mm)
83 * has already been zeroed in exit_mm(). Keeping a
84 * reference to it here seems like a bad move, so this
85 * means we can't munmap() the buffer, and therefore if we
86 * ptrace multiple threads in a process, we will slowly
87 * leak user memory. (Note that as soon as the last
88 * thread in a process dies, we will reclaim all user
89 * memory including single-step buffers in the usual way.)
90 * We should either assign a kernel VA to this buffer
91 * somehow, or we should associate the buffer(s) with the
92 * mm itself so we can clean them up that way.
94 kfree(step_state);
98 static void save_arch_state(struct thread_struct *t);
100 int copy_thread(unsigned long clone_flags, unsigned long sp,
101 unsigned long arg, struct task_struct *p)
103 struct pt_regs *childregs = task_pt_regs(p);
104 unsigned long ksp;
105 unsigned long *callee_regs;
108 * Set up the stack and stack pointer appropriately for the
109 * new child to find itself woken up in __switch_to().
110 * The callee-saved registers must be on the stack to be read;
111 * the new task will then jump to assembly support to handle
112 * calling schedule_tail(), etc., and (for userspace tasks)
113 * returning to the context set up in the pt_regs.
115 ksp = (unsigned long) childregs;
116 ksp -= C_ABI_SAVE_AREA_SIZE; /* interrupt-entry save area */
117 ((long *)ksp)[0] = ((long *)ksp)[1] = 0;
118 ksp -= CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long);
119 callee_regs = (unsigned long *)ksp;
120 ksp -= C_ABI_SAVE_AREA_SIZE; /* __switch_to() save area */
121 ((long *)ksp)[0] = ((long *)ksp)[1] = 0;
122 p->thread.ksp = ksp;
124 /* Record the pid of the task that created this one. */
125 p->thread.creator_pid = current->pid;
127 if (unlikely(p->flags & PF_KTHREAD)) {
128 /* kernel thread */
129 memset(childregs, 0, sizeof(struct pt_regs));
130 memset(&callee_regs[2], 0,
131 (CALLEE_SAVED_REGS_COUNT - 2) * sizeof(unsigned long));
132 callee_regs[0] = sp; /* r30 = function */
133 callee_regs[1] = arg; /* r31 = arg */
134 childregs->ex1 = PL_ICS_EX1(KERNEL_PL, 0);
135 p->thread.pc = (unsigned long) ret_from_kernel_thread;
136 return 0;
140 * Start new thread in ret_from_fork so it schedules properly
141 * and then return from interrupt like the parent.
143 p->thread.pc = (unsigned long) ret_from_fork;
146 * Do not clone step state from the parent; each thread
147 * must make its own lazily.
149 task_thread_info(p)->step_state = NULL;
151 #ifdef __tilegx__
153 * Do not clone unalign jit fixup from the parent; each thread
154 * must allocate its own on demand.
156 task_thread_info(p)->unalign_jit_base = NULL;
157 #endif
160 * Copy the registers onto the kernel stack so the
161 * return-from-interrupt code will reload it into registers.
163 *childregs = *current_pt_regs();
164 childregs->regs[0] = 0; /* return value is zero */
165 if (sp)
166 childregs->sp = sp; /* override with new user stack pointer */
167 memcpy(callee_regs, &childregs->regs[CALLEE_SAVED_FIRST_REG],
168 CALLEE_SAVED_REGS_COUNT * sizeof(unsigned long));
170 /* Save user stack top pointer so we can ID the stack vm area later. */
171 p->thread.usp0 = childregs->sp;
174 * If CLONE_SETTLS is set, set "tp" in the new task to "r4",
175 * which is passed in as arg #5 to sys_clone().
177 if (clone_flags & CLONE_SETTLS)
178 childregs->tp = childregs->regs[4];
181 #if CHIP_HAS_TILE_DMA()
183 * No DMA in the new thread. We model this on the fact that
184 * fork() clears the pending signals, alarms, and aio for the child.
186 memset(&p->thread.tile_dma_state, 0, sizeof(struct tile_dma_state));
187 memset(&p->thread.dma_async_tlb, 0, sizeof(struct async_tlb));
188 #endif
190 /* New thread has its miscellaneous processor state bits clear. */
191 p->thread.proc_status = 0;
193 #ifdef CONFIG_HARDWALL
194 /* New thread does not own any networks. */
195 memset(&p->thread.hardwall[0], 0,
196 sizeof(struct hardwall_task) * HARDWALL_TYPES);
197 #endif
201 * Start the new thread with the current architecture state
202 * (user interrupt masks, etc.).
204 save_arch_state(&p->thread);
206 return 0;
209 int set_unalign_ctl(struct task_struct *tsk, unsigned int val)
211 task_thread_info(tsk)->align_ctl = val;
212 return 0;
215 int get_unalign_ctl(struct task_struct *tsk, unsigned long adr)
217 return put_user(task_thread_info(tsk)->align_ctl,
218 (unsigned int __user *)adr);
221 static struct task_struct corrupt_current = { .comm = "<corrupt>" };
224 * Return "current" if it looks plausible, or else a pointer to a dummy.
225 * This can be helpful if we are just trying to emit a clean panic.
227 struct task_struct *validate_current(void)
229 struct task_struct *tsk = current;
230 if (unlikely((unsigned long)tsk < PAGE_OFFSET ||
231 (high_memory && (void *)tsk > high_memory) ||
232 ((unsigned long)tsk & (__alignof__(*tsk) - 1)) != 0)) {
233 pr_err("Corrupt 'current' %p (sp %#lx)\n", tsk, stack_pointer);
234 tsk = &corrupt_current;
236 return tsk;
239 /* Take and return the pointer to the previous task, for schedule_tail(). */
240 struct task_struct *sim_notify_fork(struct task_struct *prev)
242 struct task_struct *tsk = current;
243 __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK_PARENT |
244 (tsk->thread.creator_pid << _SIM_CONTROL_OPERATOR_BITS));
245 __insn_mtspr(SPR_SIM_CONTROL, SIM_CONTROL_OS_FORK |
246 (tsk->pid << _SIM_CONTROL_OPERATOR_BITS));
247 return prev;
250 int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
252 struct pt_regs *ptregs = task_pt_regs(tsk);
253 elf_core_copy_regs(regs, ptregs);
254 return 1;
257 #if CHIP_HAS_TILE_DMA()
259 /* Allow user processes to access the DMA SPRs */
260 void grant_dma_mpls(void)
262 #if CONFIG_KERNEL_PL == 2
263 __insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1);
264 __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1);
265 #else
266 __insn_mtspr(SPR_MPL_DMA_CPL_SET_0, 1);
267 __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_0, 1);
268 #endif
271 /* Forbid user processes from accessing the DMA SPRs */
272 void restrict_dma_mpls(void)
274 #if CONFIG_KERNEL_PL == 2
275 __insn_mtspr(SPR_MPL_DMA_CPL_SET_2, 1);
276 __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_2, 1);
277 #else
278 __insn_mtspr(SPR_MPL_DMA_CPL_SET_1, 1);
279 __insn_mtspr(SPR_MPL_DMA_NOTIFY_SET_1, 1);
280 #endif
283 /* Pause the DMA engine, then save off its state registers. */
284 static void save_tile_dma_state(struct tile_dma_state *dma)
286 unsigned long state = __insn_mfspr(SPR_DMA_USER_STATUS);
287 unsigned long post_suspend_state;
289 /* If we're running, suspend the engine. */
290 if ((state & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK)
291 __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__SUSPEND_MASK);
294 * Wait for the engine to idle, then save regs. Note that we
295 * want to record the "running" bit from before suspension,
296 * and the "done" bit from after, so that we can properly
297 * distinguish a case where the user suspended the engine from
298 * the case where the kernel suspended as part of the context
299 * swap.
301 do {
302 post_suspend_state = __insn_mfspr(SPR_DMA_USER_STATUS);
303 } while (post_suspend_state & SPR_DMA_STATUS__BUSY_MASK);
305 dma->src = __insn_mfspr(SPR_DMA_SRC_ADDR);
306 dma->src_chunk = __insn_mfspr(SPR_DMA_SRC_CHUNK_ADDR);
307 dma->dest = __insn_mfspr(SPR_DMA_DST_ADDR);
308 dma->dest_chunk = __insn_mfspr(SPR_DMA_DST_CHUNK_ADDR);
309 dma->strides = __insn_mfspr(SPR_DMA_STRIDE);
310 dma->chunk_size = __insn_mfspr(SPR_DMA_CHUNK_SIZE);
311 dma->byte = __insn_mfspr(SPR_DMA_BYTE);
312 dma->status = (state & SPR_DMA_STATUS__RUNNING_MASK) |
313 (post_suspend_state & SPR_DMA_STATUS__DONE_MASK);
316 /* Restart a DMA that was running before we were context-switched out. */
317 static void restore_tile_dma_state(struct thread_struct *t)
319 const struct tile_dma_state *dma = &t->tile_dma_state;
322 * The only way to restore the done bit is to run a zero
323 * length transaction.
325 if ((dma->status & SPR_DMA_STATUS__DONE_MASK) &&
326 !(__insn_mfspr(SPR_DMA_USER_STATUS) & SPR_DMA_STATUS__DONE_MASK)) {
327 __insn_mtspr(SPR_DMA_BYTE, 0);
328 __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK);
329 while (__insn_mfspr(SPR_DMA_USER_STATUS) &
330 SPR_DMA_STATUS__BUSY_MASK)
334 __insn_mtspr(SPR_DMA_SRC_ADDR, dma->src);
335 __insn_mtspr(SPR_DMA_SRC_CHUNK_ADDR, dma->src_chunk);
336 __insn_mtspr(SPR_DMA_DST_ADDR, dma->dest);
337 __insn_mtspr(SPR_DMA_DST_CHUNK_ADDR, dma->dest_chunk);
338 __insn_mtspr(SPR_DMA_STRIDE, dma->strides);
339 __insn_mtspr(SPR_DMA_CHUNK_SIZE, dma->chunk_size);
340 __insn_mtspr(SPR_DMA_BYTE, dma->byte);
343 * Restart the engine if we were running and not done.
344 * Clear a pending async DMA fault that we were waiting on return
345 * to user space to execute, since we expect the DMA engine
346 * to regenerate those faults for us now. Note that we don't
347 * try to clear the TIF_ASYNC_TLB flag, since it's relatively
348 * harmless if set, and it covers both DMA and the SN processor.
350 if ((dma->status & DMA_STATUS_MASK) == SPR_DMA_STATUS__RUNNING_MASK) {
351 t->dma_async_tlb.fault_num = 0;
352 __insn_mtspr(SPR_DMA_CTR, SPR_DMA_CTR__REQUEST_MASK);
356 #endif
358 static void save_arch_state(struct thread_struct *t)
360 #if CHIP_HAS_SPLIT_INTR_MASK()
361 t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0_0) |
362 ((u64)__insn_mfspr(SPR_INTERRUPT_MASK_0_1) << 32);
363 #else
364 t->interrupt_mask = __insn_mfspr(SPR_INTERRUPT_MASK_0);
365 #endif
366 t->ex_context[0] = __insn_mfspr(SPR_EX_CONTEXT_0_0);
367 t->ex_context[1] = __insn_mfspr(SPR_EX_CONTEXT_0_1);
368 t->system_save[0] = __insn_mfspr(SPR_SYSTEM_SAVE_0_0);
369 t->system_save[1] = __insn_mfspr(SPR_SYSTEM_SAVE_0_1);
370 t->system_save[2] = __insn_mfspr(SPR_SYSTEM_SAVE_0_2);
371 t->system_save[3] = __insn_mfspr(SPR_SYSTEM_SAVE_0_3);
372 t->intctrl_0 = __insn_mfspr(SPR_INTCTRL_0_STATUS);
373 t->proc_status = __insn_mfspr(SPR_PROC_STATUS);
374 #if !CHIP_HAS_FIXED_INTVEC_BASE()
375 t->interrupt_vector_base = __insn_mfspr(SPR_INTERRUPT_VECTOR_BASE_0);
376 #endif
377 t->tile_rtf_hwm = __insn_mfspr(SPR_TILE_RTF_HWM);
378 #if CHIP_HAS_DSTREAM_PF()
379 t->dstream_pf = __insn_mfspr(SPR_DSTREAM_PF);
380 #endif
383 static void restore_arch_state(const struct thread_struct *t)
385 #if CHIP_HAS_SPLIT_INTR_MASK()
386 __insn_mtspr(SPR_INTERRUPT_MASK_0_0, (u32) t->interrupt_mask);
387 __insn_mtspr(SPR_INTERRUPT_MASK_0_1, t->interrupt_mask >> 32);
388 #else
389 __insn_mtspr(SPR_INTERRUPT_MASK_0, t->interrupt_mask);
390 #endif
391 __insn_mtspr(SPR_EX_CONTEXT_0_0, t->ex_context[0]);
392 __insn_mtspr(SPR_EX_CONTEXT_0_1, t->ex_context[1]);
393 __insn_mtspr(SPR_SYSTEM_SAVE_0_0, t->system_save[0]);
394 __insn_mtspr(SPR_SYSTEM_SAVE_0_1, t->system_save[1]);
395 __insn_mtspr(SPR_SYSTEM_SAVE_0_2, t->system_save[2]);
396 __insn_mtspr(SPR_SYSTEM_SAVE_0_3, t->system_save[3]);
397 __insn_mtspr(SPR_INTCTRL_0_STATUS, t->intctrl_0);
398 __insn_mtspr(SPR_PROC_STATUS, t->proc_status);
399 #if !CHIP_HAS_FIXED_INTVEC_BASE()
400 __insn_mtspr(SPR_INTERRUPT_VECTOR_BASE_0, t->interrupt_vector_base);
401 #endif
402 __insn_mtspr(SPR_TILE_RTF_HWM, t->tile_rtf_hwm);
403 #if CHIP_HAS_DSTREAM_PF()
404 __insn_mtspr(SPR_DSTREAM_PF, t->dstream_pf);
405 #endif
409 void _prepare_arch_switch(struct task_struct *next)
411 #if CHIP_HAS_TILE_DMA()
412 struct tile_dma_state *dma = &current->thread.tile_dma_state;
413 if (dma->enabled)
414 save_tile_dma_state(dma);
415 #endif
419 struct task_struct *__sched _switch_to(struct task_struct *prev,
420 struct task_struct *next)
422 /* DMA state is already saved; save off other arch state. */
423 save_arch_state(&prev->thread);
425 #if CHIP_HAS_TILE_DMA()
427 * Restore DMA in new task if desired.
428 * Note that it is only safe to restart here since interrupts
429 * are disabled, so we can't take any DMATLB miss or access
430 * interrupts before we have finished switching stacks.
432 if (next->thread.tile_dma_state.enabled) {
433 restore_tile_dma_state(&next->thread);
434 grant_dma_mpls();
435 } else {
436 restrict_dma_mpls();
438 #endif
440 /* Restore other arch state. */
441 restore_arch_state(&next->thread);
443 #ifdef CONFIG_HARDWALL
444 /* Enable or disable access to the network registers appropriately. */
445 hardwall_switch_tasks(prev, next);
446 #endif
449 * Switch kernel SP, PC, and callee-saved registers.
450 * In the context of the new task, return the old task pointer
451 * (i.e. the task that actually called __switch_to).
452 * Pass the value to use for SYSTEM_SAVE_K_0 when we reset our sp.
454 return __switch_to(prev, next, next_current_ksp0(next));
458 * This routine is called on return from interrupt if any of the
459 * TIF_WORK_MASK flags are set in thread_info->flags. It is
460 * entered with interrupts disabled so we don't miss an event
461 * that modified the thread_info flags. If any flag is set, we
462 * handle it and return, and the calling assembly code will
463 * re-disable interrupts, reload the thread flags, and call back
464 * if more flags need to be handled.
466 * We return whether we need to check the thread_info flags again
467 * or not. Note that we don't clear TIF_SINGLESTEP here, so it's
468 * important that it be tested last, and then claim that we don't
469 * need to recheck the flags.
471 int do_work_pending(struct pt_regs *regs, u32 thread_info_flags)
473 /* If we enter in kernel mode, do nothing and exit the caller loop. */
474 if (!user_mode(regs))
475 return 0;
477 /* Enable interrupts; they are disabled again on return to caller. */
478 local_irq_enable();
480 if (thread_info_flags & _TIF_NEED_RESCHED) {
481 schedule();
482 return 1;
484 #if CHIP_HAS_TILE_DMA()
485 if (thread_info_flags & _TIF_ASYNC_TLB) {
486 do_async_page_fault(regs);
487 return 1;
489 #endif
490 if (thread_info_flags & _TIF_SIGPENDING) {
491 do_signal(regs);
492 return 1;
494 if (thread_info_flags & _TIF_NOTIFY_RESUME) {
495 clear_thread_flag(TIF_NOTIFY_RESUME);
496 tracehook_notify_resume(regs);
497 return 1;
499 if (thread_info_flags & _TIF_SINGLESTEP) {
500 single_step_once(regs);
501 return 0;
503 panic("work_pending: bad flags %#x\n", thread_info_flags);
506 unsigned long get_wchan(struct task_struct *p)
508 struct KBacktraceIterator kbt;
510 if (!p || p == current || p->state == TASK_RUNNING)
511 return 0;
513 for (KBacktraceIterator_init(&kbt, p, NULL);
514 !KBacktraceIterator_end(&kbt);
515 KBacktraceIterator_next(&kbt)) {
516 if (!in_sched_functions(kbt.it.pc))
517 return kbt.it.pc;
520 return 0;
523 /* Flush thread state. */
524 void flush_thread(void)
526 /* Nothing */
530 * Free current thread data structures etc..
532 void exit_thread(void)
534 #ifdef CONFIG_HARDWALL
536 * Remove the task from the list of tasks that are associated
537 * with any live hardwalls. (If the task that is exiting held
538 * the last reference to a hardwall fd, it would already have
539 * been released and deactivated at this point.)
541 hardwall_deactivate_all(current);
542 #endif
545 void show_regs(struct pt_regs *regs)
547 struct task_struct *tsk = validate_current();
548 int i;
550 pr_err("\n");
551 if (tsk != &corrupt_current)
552 show_regs_print_info(KERN_ERR);
553 #ifdef __tilegx__
554 for (i = 0; i < 17; i++)
555 pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT" r%-2d: "REGFMT"\n",
556 i, regs->regs[i], i+18, regs->regs[i+18],
557 i+36, regs->regs[i+36]);
558 pr_err(" r17: "REGFMT" r35: "REGFMT" tp : "REGFMT"\n",
559 regs->regs[17], regs->regs[35], regs->tp);
560 pr_err(" sp : "REGFMT" lr : "REGFMT"\n", regs->sp, regs->lr);
561 #else
562 for (i = 0; i < 13; i++)
563 pr_err(" r%-2d: "REGFMT" r%-2d: "REGFMT
564 " r%-2d: "REGFMT" r%-2d: "REGFMT"\n",
565 i, regs->regs[i], i+14, regs->regs[i+14],
566 i+27, regs->regs[i+27], i+40, regs->regs[i+40]);
567 pr_err(" r13: "REGFMT" tp : "REGFMT" sp : "REGFMT" lr : "REGFMT"\n",
568 regs->regs[13], regs->tp, regs->sp, regs->lr);
569 #endif
570 pr_err(" pc : "REGFMT" ex1: %ld faultnum: %ld\n",
571 regs->pc, regs->ex1, regs->faultnum);
573 dump_stack_regs(regs);