1 #include <linux/linkage.h>
2 #include <linux/errno.h>
3 #include <linux/signal.h>
4 #include <linux/sched.h>
5 #include <linux/ioport.h>
6 #include <linux/interrupt.h>
7 #include <linux/timex.h>
8 #include <linux/random.h>
9 #include <linux/init.h>
10 #include <linux/kernel_stat.h>
11 #include <linux/syscore_ops.h>
12 #include <linux/bitops.h>
13 #include <linux/acpi.h>
15 #include <linux/delay.h>
17 #include <linux/atomic.h>
18 #include <asm/timer.h>
19 #include <asm/hw_irq.h>
20 #include <asm/pgtable.h>
23 #include <asm/i8259.h>
26 * This is the 'legacy' 8259A Programmable Interrupt Controller,
27 * present in the majority of PC/AT boxes.
28 * plus some generic x86 specific things if generic specifics makes
31 static void init_8259A(int auto_eoi
);
33 static int i8259A_auto_eoi
;
34 DEFINE_RAW_SPINLOCK(i8259A_lock
);
37 * 8259A PIC functions to handle ISA devices:
41 * This contains the irq mask for both 8259A irq controllers,
43 unsigned int cached_irq_mask
= 0xffff;
46 * Not all IRQs can be routed through the IO-APIC, eg. on certain (older)
47 * boards the timer interrupt is not really connected to any IO-APIC pin,
48 * it's fed to the master 8259A's IR0 line only.
50 * Any '1' bit in this mask means the IRQ is routed through the IO-APIC.
51 * this 'mixed mode' IRQ handling costs nothing because it's only used
54 unsigned long io_apic_irqs
;
56 static void mask_8259A_irq(unsigned int irq
)
58 unsigned int mask
= 1 << irq
;
61 raw_spin_lock_irqsave(&i8259A_lock
, flags
);
62 cached_irq_mask
|= mask
;
64 outb(cached_slave_mask
, PIC_SLAVE_IMR
);
66 outb(cached_master_mask
, PIC_MASTER_IMR
);
67 raw_spin_unlock_irqrestore(&i8259A_lock
, flags
);
70 static void disable_8259A_irq(struct irq_data
*data
)
72 mask_8259A_irq(data
->irq
);
75 static void unmask_8259A_irq(unsigned int irq
)
77 unsigned int mask
= ~(1 << irq
);
80 raw_spin_lock_irqsave(&i8259A_lock
, flags
);
81 cached_irq_mask
&= mask
;
83 outb(cached_slave_mask
, PIC_SLAVE_IMR
);
85 outb(cached_master_mask
, PIC_MASTER_IMR
);
86 raw_spin_unlock_irqrestore(&i8259A_lock
, flags
);
89 static void enable_8259A_irq(struct irq_data
*data
)
91 unmask_8259A_irq(data
->irq
);
94 static int i8259A_irq_pending(unsigned int irq
)
96 unsigned int mask
= 1<<irq
;
100 raw_spin_lock_irqsave(&i8259A_lock
, flags
);
102 ret
= inb(PIC_MASTER_CMD
) & mask
;
104 ret
= inb(PIC_SLAVE_CMD
) & (mask
>> 8);
105 raw_spin_unlock_irqrestore(&i8259A_lock
, flags
);
110 static void make_8259A_irq(unsigned int irq
)
112 disable_irq_nosync(irq
);
113 io_apic_irqs
&= ~(1<<irq
);
114 irq_set_chip_and_handler_name(irq
, &i8259A_chip
, handle_level_irq
,
120 * This function assumes to be called rarely. Switching between
121 * 8259A registers is slow.
122 * This has to be protected by the irq controller spinlock
123 * before being called.
125 static inline int i8259A_irq_real(unsigned int irq
)
128 int irqmask
= 1<<irq
;
131 outb(0x0B, PIC_MASTER_CMD
); /* ISR register */
132 value
= inb(PIC_MASTER_CMD
) & irqmask
;
133 outb(0x0A, PIC_MASTER_CMD
); /* back to the IRR register */
136 outb(0x0B, PIC_SLAVE_CMD
); /* ISR register */
137 value
= inb(PIC_SLAVE_CMD
) & (irqmask
>> 8);
138 outb(0x0A, PIC_SLAVE_CMD
); /* back to the IRR register */
143 * Careful! The 8259A is a fragile beast, it pretty
144 * much _has_ to be done exactly like this (mask it
145 * first, _then_ send the EOI, and the order of EOI
146 * to the two 8259s is important!
148 static void mask_and_ack_8259A(struct irq_data
*data
)
150 unsigned int irq
= data
->irq
;
151 unsigned int irqmask
= 1 << irq
;
154 raw_spin_lock_irqsave(&i8259A_lock
, flags
);
156 * Lightweight spurious IRQ detection. We do not want
157 * to overdo spurious IRQ handling - it's usually a sign
158 * of hardware problems, so we only do the checks we can
159 * do without slowing down good hardware unnecessarily.
161 * Note that IRQ7 and IRQ15 (the two spurious IRQs
162 * usually resulting from the 8259A-1|2 PICs) occur
163 * even if the IRQ is masked in the 8259A. Thus we
164 * can check spurious 8259A IRQs without doing the
165 * quite slow i8259A_irq_real() call for every IRQ.
166 * This does not cover 100% of spurious interrupts,
167 * but should be enough to warn the user that there
168 * is something bad going on ...
170 if (cached_irq_mask
& irqmask
)
171 goto spurious_8259A_irq
;
172 cached_irq_mask
|= irqmask
;
176 inb(PIC_SLAVE_IMR
); /* DUMMY - (do we need this?) */
177 outb(cached_slave_mask
, PIC_SLAVE_IMR
);
178 /* 'Specific EOI' to slave */
179 outb(0x60+(irq
&7), PIC_SLAVE_CMD
);
180 /* 'Specific EOI' to master-IRQ2 */
181 outb(0x60+PIC_CASCADE_IR
, PIC_MASTER_CMD
);
183 inb(PIC_MASTER_IMR
); /* DUMMY - (do we need this?) */
184 outb(cached_master_mask
, PIC_MASTER_IMR
);
185 outb(0x60+irq
, PIC_MASTER_CMD
); /* 'Specific EOI to master */
187 raw_spin_unlock_irqrestore(&i8259A_lock
, flags
);
192 * this is the slow path - should happen rarely.
194 if (i8259A_irq_real(irq
))
196 * oops, the IRQ _is_ in service according to the
197 * 8259A - not spurious, go handle it.
199 goto handle_real_irq
;
202 static int spurious_irq_mask
;
204 * At this point we can be sure the IRQ is spurious,
205 * lets ACK and report it. [once per IRQ]
207 if (!(spurious_irq_mask
& irqmask
)) {
209 "spurious 8259A interrupt: IRQ%d.\n", irq
);
210 spurious_irq_mask
|= irqmask
;
212 atomic_inc(&irq_err_count
);
214 * Theoretically we do not have to handle this IRQ,
215 * but in Linux this does not cause problems and is
218 goto handle_real_irq
;
222 struct irq_chip i8259A_chip
= {
224 .irq_mask
= disable_8259A_irq
,
225 .irq_disable
= disable_8259A_irq
,
226 .irq_unmask
= enable_8259A_irq
,
227 .irq_mask_ack
= mask_and_ack_8259A
,
230 static char irq_trigger
[2];
232 * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ
234 static void restore_ELCR(char *trigger
)
236 outb(trigger
[0], 0x4d0);
237 outb(trigger
[1], 0x4d1);
240 static void save_ELCR(char *trigger
)
242 /* IRQ 0,1,2,8,13 are marked as reserved */
243 trigger
[0] = inb(0x4d0) & 0xF8;
244 trigger
[1] = inb(0x4d1) & 0xDE;
247 static void i8259A_resume(void)
249 init_8259A(i8259A_auto_eoi
);
250 restore_ELCR(irq_trigger
);
253 static int i8259A_suspend(void)
255 save_ELCR(irq_trigger
);
259 static void i8259A_shutdown(void)
261 /* Put the i8259A into a quiescent state that
262 * the kernel initialization code can get it
265 outb(0xff, PIC_MASTER_IMR
); /* mask all of 8259A-1 */
266 outb(0xff, PIC_SLAVE_IMR
); /* mask all of 8259A-2 */
269 static struct syscore_ops i8259_syscore_ops
= {
270 .suspend
= i8259A_suspend
,
271 .resume
= i8259A_resume
,
272 .shutdown
= i8259A_shutdown
,
275 static void mask_8259A(void)
279 raw_spin_lock_irqsave(&i8259A_lock
, flags
);
281 outb(0xff, PIC_MASTER_IMR
); /* mask all of 8259A-1 */
282 outb(0xff, PIC_SLAVE_IMR
); /* mask all of 8259A-2 */
284 raw_spin_unlock_irqrestore(&i8259A_lock
, flags
);
287 static void unmask_8259A(void)
291 raw_spin_lock_irqsave(&i8259A_lock
, flags
);
293 outb(cached_master_mask
, PIC_MASTER_IMR
); /* restore master IRQ mask */
294 outb(cached_slave_mask
, PIC_SLAVE_IMR
); /* restore slave IRQ mask */
296 raw_spin_unlock_irqrestore(&i8259A_lock
, flags
);
299 static void init_8259A(int auto_eoi
)
303 i8259A_auto_eoi
= auto_eoi
;
305 raw_spin_lock_irqsave(&i8259A_lock
, flags
);
307 outb(0xff, PIC_MASTER_IMR
); /* mask all of 8259A-1 */
308 outb(0xff, PIC_SLAVE_IMR
); /* mask all of 8259A-2 */
311 * outb_pic - this has to work on a wide range of PC hardware.
313 outb_pic(0x11, PIC_MASTER_CMD
); /* ICW1: select 8259A-1 init */
315 /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 on x86-64,
316 to 0x20-0x27 on i386 */
317 outb_pic(IRQ0_VECTOR
, PIC_MASTER_IMR
);
319 /* 8259A-1 (the master) has a slave on IR2 */
320 outb_pic(1U << PIC_CASCADE_IR
, PIC_MASTER_IMR
);
322 if (auto_eoi
) /* master does Auto EOI */
323 outb_pic(MASTER_ICW4_DEFAULT
| PIC_ICW4_AEOI
, PIC_MASTER_IMR
);
324 else /* master expects normal EOI */
325 outb_pic(MASTER_ICW4_DEFAULT
, PIC_MASTER_IMR
);
327 outb_pic(0x11, PIC_SLAVE_CMD
); /* ICW1: select 8259A-2 init */
329 /* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */
330 outb_pic(IRQ8_VECTOR
, PIC_SLAVE_IMR
);
331 /* 8259A-2 is a slave on master's IR2 */
332 outb_pic(PIC_CASCADE_IR
, PIC_SLAVE_IMR
);
333 /* (slave's support for AEOI in flat mode is to be investigated) */
334 outb_pic(SLAVE_ICW4_DEFAULT
, PIC_SLAVE_IMR
);
338 * In AEOI mode we just have to mask the interrupt
341 i8259A_chip
.irq_mask_ack
= disable_8259A_irq
;
343 i8259A_chip
.irq_mask_ack
= mask_and_ack_8259A
;
345 udelay(100); /* wait for 8259A to initialize */
347 outb(cached_master_mask
, PIC_MASTER_IMR
); /* restore master IRQ mask */
348 outb(cached_slave_mask
, PIC_SLAVE_IMR
); /* restore slave IRQ mask */
350 raw_spin_unlock_irqrestore(&i8259A_lock
, flags
);
354 * make i8259 a driver so that we can select pic functions at run time. the goal
355 * is to make x86 binary compatible among pc compatible and non-pc compatible
356 * platforms, such as x86 MID.
359 static void legacy_pic_noop(void) { };
360 static void legacy_pic_uint_noop(unsigned int unused
) { };
361 static void legacy_pic_int_noop(int unused
) { };
362 static int legacy_pic_irq_pending_noop(unsigned int irq
)
367 struct legacy_pic null_legacy_pic
= {
369 .chip
= &dummy_irq_chip
,
370 .mask
= legacy_pic_uint_noop
,
371 .unmask
= legacy_pic_uint_noop
,
372 .mask_all
= legacy_pic_noop
,
373 .restore_mask
= legacy_pic_noop
,
374 .init
= legacy_pic_int_noop
,
375 .irq_pending
= legacy_pic_irq_pending_noop
,
376 .make_irq
= legacy_pic_uint_noop
,
379 struct legacy_pic default_legacy_pic
= {
380 .nr_legacy_irqs
= NR_IRQS_LEGACY
,
381 .chip
= &i8259A_chip
,
382 .mask
= mask_8259A_irq
,
383 .unmask
= unmask_8259A_irq
,
384 .mask_all
= mask_8259A
,
385 .restore_mask
= unmask_8259A
,
387 .irq_pending
= i8259A_irq_pending
,
388 .make_irq
= make_8259A_irq
,
391 struct legacy_pic
*legacy_pic
= &default_legacy_pic
;
393 static int __init
i8259A_init_ops(void)
395 if (legacy_pic
== &default_legacy_pic
)
396 register_syscore_ops(&i8259_syscore_ops
);
401 device_initcall(i8259A_init_ops
);