x86/efi: Enforce CONFIG_RELOCATABLE for EFI boot stub
[linux/fpc-iii.git] / arch / x86 / kernel / microcode_core.c
blob15c987698b0f730ed47b3f0daaf1021e6b1abdff
1 /*
2 * Intel CPU Microcode Update Driver for Linux
4 * Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
5 * 2006 Shaohua Li <shaohua.li@intel.com>
7 * This driver allows to upgrade microcode on Intel processors
8 * belonging to IA-32 family - PentiumPro, Pentium II,
9 * Pentium III, Xeon, Pentium 4, etc.
11 * Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
12 * Software Developer's Manual
13 * Order Number 253668 or free download from:
15 * http://developer.intel.com/Assets/PDF/manual/253668.pdf
17 * For more information, go to http://www.urbanmyth.org/microcode
19 * This program is free software; you can redistribute it and/or
20 * modify it under the terms of the GNU General Public License
21 * as published by the Free Software Foundation; either version
22 * 2 of the License, or (at your option) any later version.
24 * 1.0 16 Feb 2000, Tigran Aivazian <tigran@sco.com>
25 * Initial release.
26 * 1.01 18 Feb 2000, Tigran Aivazian <tigran@sco.com>
27 * Added read() support + cleanups.
28 * 1.02 21 Feb 2000, Tigran Aivazian <tigran@sco.com>
29 * Added 'device trimming' support. open(O_WRONLY) zeroes
30 * and frees the saved copy of applied microcode.
31 * 1.03 29 Feb 2000, Tigran Aivazian <tigran@sco.com>
32 * Made to use devfs (/dev/cpu/microcode) + cleanups.
33 * 1.04 06 Jun 2000, Simon Trimmer <simon@veritas.com>
34 * Added misc device support (now uses both devfs and misc).
35 * Added MICROCODE_IOCFREE ioctl to clear memory.
36 * 1.05 09 Jun 2000, Simon Trimmer <simon@veritas.com>
37 * Messages for error cases (non Intel & no suitable microcode).
38 * 1.06 03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
39 * Removed ->release(). Removed exclusive open and status bitmap.
40 * Added microcode_rwsem to serialize read()/write()/ioctl().
41 * Removed global kernel lock usage.
42 * 1.07 07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
43 * Write 0 to 0x8B msr and then cpuid before reading revision,
44 * so that it works even if there were no update done by the
45 * BIOS. Otherwise, reading from 0x8B gives junk (which happened
46 * to be 0 on my machine which is why it worked even when I
47 * disabled update by the BIOS)
48 * Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
49 * 1.08 11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
50 * Tigran Aivazian <tigran@veritas.com>
51 * Intel Pentium 4 processor support and bugfixes.
52 * 1.09 30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
53 * Bugfix for HT (Hyper-Threading) enabled processors
54 * whereby processor resources are shared by all logical processors
55 * in a single CPU package.
56 * 1.10 28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
57 * Tigran Aivazian <tigran@veritas.com>,
58 * Serialize updates as required on HT processors due to
59 * speculative nature of implementation.
60 * 1.11 22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
61 * Fix the panic when writing zero-length microcode chunk.
62 * 1.12 29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
63 * Jun Nakajima <jun.nakajima@intel.com>
64 * Support for the microcode updates in the new format.
65 * 1.13 10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
66 * Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
67 * because we no longer hold a copy of applied microcode
68 * in kernel memory.
69 * 1.14 25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
70 * Fix sigmatch() macro to handle old CPUs with pf == 0.
71 * Thanks to Stuart Swales for pointing out this bug.
74 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
76 #include <linux/platform_device.h>
77 #include <linux/miscdevice.h>
78 #include <linux/capability.h>
79 #include <linux/kernel.h>
80 #include <linux/module.h>
81 #include <linux/mutex.h>
82 #include <linux/cpu.h>
83 #include <linux/fs.h>
84 #include <linux/mm.h>
85 #include <linux/syscore_ops.h>
87 #include <asm/microcode.h>
88 #include <asm/processor.h>
89 #include <asm/cpu_device_id.h>
90 #include <asm/perf_event.h>
92 MODULE_DESCRIPTION("Microcode Update Driver");
93 MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
94 MODULE_LICENSE("GPL");
96 #define MICROCODE_VERSION "2.00"
98 static struct microcode_ops *microcode_ops;
101 * Synchronization.
103 * All non cpu-hotplug-callback call sites use:
105 * - microcode_mutex to synchronize with each other;
106 * - get/put_online_cpus() to synchronize with
107 * the cpu-hotplug-callback call sites.
109 * We guarantee that only a single cpu is being
110 * updated at any particular moment of time.
112 static DEFINE_MUTEX(microcode_mutex);
114 struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
115 EXPORT_SYMBOL_GPL(ucode_cpu_info);
118 * Operations that are run on a target cpu:
121 struct cpu_info_ctx {
122 struct cpu_signature *cpu_sig;
123 int err;
126 static void collect_cpu_info_local(void *arg)
128 struct cpu_info_ctx *ctx = arg;
130 ctx->err = microcode_ops->collect_cpu_info(smp_processor_id(),
131 ctx->cpu_sig);
134 static int collect_cpu_info_on_target(int cpu, struct cpu_signature *cpu_sig)
136 struct cpu_info_ctx ctx = { .cpu_sig = cpu_sig, .err = 0 };
137 int ret;
139 ret = smp_call_function_single(cpu, collect_cpu_info_local, &ctx, 1);
140 if (!ret)
141 ret = ctx.err;
143 return ret;
146 static int collect_cpu_info(int cpu)
148 struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
149 int ret;
151 memset(uci, 0, sizeof(*uci));
153 ret = collect_cpu_info_on_target(cpu, &uci->cpu_sig);
154 if (!ret)
155 uci->valid = 1;
157 return ret;
160 struct apply_microcode_ctx {
161 int err;
164 static void apply_microcode_local(void *arg)
166 struct apply_microcode_ctx *ctx = arg;
168 ctx->err = microcode_ops->apply_microcode(smp_processor_id());
171 static int apply_microcode_on_target(int cpu)
173 struct apply_microcode_ctx ctx = { .err = 0 };
174 int ret;
176 ret = smp_call_function_single(cpu, apply_microcode_local, &ctx, 1);
177 if (!ret)
178 ret = ctx.err;
180 return ret;
183 #ifdef CONFIG_MICROCODE_OLD_INTERFACE
184 static int do_microcode_update(const void __user *buf, size_t size)
186 int error = 0;
187 int cpu;
189 for_each_online_cpu(cpu) {
190 struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
191 enum ucode_state ustate;
193 if (!uci->valid)
194 continue;
196 ustate = microcode_ops->request_microcode_user(cpu, buf, size);
197 if (ustate == UCODE_ERROR) {
198 error = -1;
199 break;
200 } else if (ustate == UCODE_OK)
201 apply_microcode_on_target(cpu);
204 return error;
207 static int microcode_open(struct inode *inode, struct file *file)
209 return capable(CAP_SYS_RAWIO) ? nonseekable_open(inode, file) : -EPERM;
212 static ssize_t microcode_write(struct file *file, const char __user *buf,
213 size_t len, loff_t *ppos)
215 ssize_t ret = -EINVAL;
217 if ((len >> PAGE_SHIFT) > totalram_pages) {
218 pr_err("too much data (max %ld pages)\n", totalram_pages);
219 return ret;
222 get_online_cpus();
223 mutex_lock(&microcode_mutex);
225 if (do_microcode_update(buf, len) == 0)
226 ret = (ssize_t)len;
228 if (ret > 0)
229 perf_check_microcode();
231 mutex_unlock(&microcode_mutex);
232 put_online_cpus();
234 return ret;
237 static const struct file_operations microcode_fops = {
238 .owner = THIS_MODULE,
239 .write = microcode_write,
240 .open = microcode_open,
241 .llseek = no_llseek,
244 static struct miscdevice microcode_dev = {
245 .minor = MICROCODE_MINOR,
246 .name = "microcode",
247 .nodename = "cpu/microcode",
248 .fops = &microcode_fops,
251 static int __init microcode_dev_init(void)
253 int error;
255 error = misc_register(&microcode_dev);
256 if (error) {
257 pr_err("can't misc_register on minor=%d\n", MICROCODE_MINOR);
258 return error;
261 return 0;
264 static void __exit microcode_dev_exit(void)
266 misc_deregister(&microcode_dev);
269 MODULE_ALIAS_MISCDEV(MICROCODE_MINOR);
270 MODULE_ALIAS("devname:cpu/microcode");
271 #else
272 #define microcode_dev_init() 0
273 #define microcode_dev_exit() do { } while (0)
274 #endif
276 /* fake device for request_firmware */
277 static struct platform_device *microcode_pdev;
279 static int reload_for_cpu(int cpu)
281 struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
282 enum ucode_state ustate;
283 int err = 0;
285 if (!uci->valid)
286 return err;
288 ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev, true);
289 if (ustate == UCODE_OK)
290 apply_microcode_on_target(cpu);
291 else
292 if (ustate == UCODE_ERROR)
293 err = -EINVAL;
294 return err;
297 static ssize_t reload_store(struct device *dev,
298 struct device_attribute *attr,
299 const char *buf, size_t size)
301 unsigned long val;
302 int cpu;
303 ssize_t ret = 0, tmp_ret;
305 ret = kstrtoul(buf, 0, &val);
306 if (ret)
307 return ret;
309 if (val != 1)
310 return size;
312 get_online_cpus();
313 mutex_lock(&microcode_mutex);
314 for_each_online_cpu(cpu) {
315 tmp_ret = reload_for_cpu(cpu);
316 if (tmp_ret != 0)
317 pr_warn("Error reloading microcode on CPU %d\n", cpu);
319 /* save retval of the first encountered reload error */
320 if (!ret)
321 ret = tmp_ret;
323 if (!ret)
324 perf_check_microcode();
325 mutex_unlock(&microcode_mutex);
326 put_online_cpus();
328 if (!ret)
329 ret = size;
331 return ret;
334 static ssize_t version_show(struct device *dev,
335 struct device_attribute *attr, char *buf)
337 struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
339 return sprintf(buf, "0x%x\n", uci->cpu_sig.rev);
342 static ssize_t pf_show(struct device *dev,
343 struct device_attribute *attr, char *buf)
345 struct ucode_cpu_info *uci = ucode_cpu_info + dev->id;
347 return sprintf(buf, "0x%x\n", uci->cpu_sig.pf);
350 static DEVICE_ATTR(reload, 0200, NULL, reload_store);
351 static DEVICE_ATTR(version, 0400, version_show, NULL);
352 static DEVICE_ATTR(processor_flags, 0400, pf_show, NULL);
354 static struct attribute *mc_default_attrs[] = {
355 &dev_attr_version.attr,
356 &dev_attr_processor_flags.attr,
357 NULL
360 static struct attribute_group mc_attr_group = {
361 .attrs = mc_default_attrs,
362 .name = "microcode",
365 static void microcode_fini_cpu(int cpu)
367 microcode_ops->microcode_fini_cpu(cpu);
370 static enum ucode_state microcode_resume_cpu(int cpu)
372 pr_debug("CPU%d updated upon resume\n", cpu);
374 if (apply_microcode_on_target(cpu))
375 return UCODE_ERROR;
377 return UCODE_OK;
380 static enum ucode_state microcode_init_cpu(int cpu, bool refresh_fw)
382 enum ucode_state ustate;
383 struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
385 if (uci && uci->valid)
386 return UCODE_OK;
388 if (collect_cpu_info(cpu))
389 return UCODE_ERROR;
391 /* --dimm. Trigger a delayed update? */
392 if (system_state != SYSTEM_RUNNING)
393 return UCODE_NFOUND;
395 ustate = microcode_ops->request_microcode_fw(cpu, &microcode_pdev->dev,
396 refresh_fw);
398 if (ustate == UCODE_OK) {
399 pr_debug("CPU%d updated upon init\n", cpu);
400 apply_microcode_on_target(cpu);
403 return ustate;
406 static enum ucode_state microcode_update_cpu(int cpu)
408 struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
410 if (uci->valid)
411 return microcode_resume_cpu(cpu);
413 return microcode_init_cpu(cpu, false);
416 static int mc_device_add(struct device *dev, struct subsys_interface *sif)
418 int err, cpu = dev->id;
420 if (!cpu_online(cpu))
421 return 0;
423 pr_debug("CPU%d added\n", cpu);
425 err = sysfs_create_group(&dev->kobj, &mc_attr_group);
426 if (err)
427 return err;
429 if (microcode_init_cpu(cpu, true) == UCODE_ERROR)
430 return -EINVAL;
432 return err;
435 static int mc_device_remove(struct device *dev, struct subsys_interface *sif)
437 int cpu = dev->id;
439 if (!cpu_online(cpu))
440 return 0;
442 pr_debug("CPU%d removed\n", cpu);
443 microcode_fini_cpu(cpu);
444 sysfs_remove_group(&dev->kobj, &mc_attr_group);
445 return 0;
448 static struct subsys_interface mc_cpu_interface = {
449 .name = "microcode",
450 .subsys = &cpu_subsys,
451 .add_dev = mc_device_add,
452 .remove_dev = mc_device_remove,
456 * mc_bp_resume - Update boot CPU microcode during resume.
458 static void mc_bp_resume(void)
460 int cpu = smp_processor_id();
461 struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
463 if (uci->valid && uci->mc)
464 microcode_ops->apply_microcode(cpu);
467 static struct syscore_ops mc_syscore_ops = {
468 .resume = mc_bp_resume,
471 static int
472 mc_cpu_callback(struct notifier_block *nb, unsigned long action, void *hcpu)
474 unsigned int cpu = (unsigned long)hcpu;
475 struct device *dev;
477 dev = get_cpu_device(cpu);
479 switch (action & ~CPU_TASKS_FROZEN) {
480 case CPU_ONLINE:
481 microcode_update_cpu(cpu);
482 pr_debug("CPU%d added\n", cpu);
484 * "break" is missing on purpose here because we want to fall
485 * through in order to create the sysfs group.
488 case CPU_DOWN_FAILED:
489 if (sysfs_create_group(&dev->kobj, &mc_attr_group))
490 pr_err("Failed to create group for CPU%d\n", cpu);
491 break;
493 case CPU_DOWN_PREPARE:
494 /* Suspend is in progress, only remove the interface */
495 sysfs_remove_group(&dev->kobj, &mc_attr_group);
496 pr_debug("CPU%d removed\n", cpu);
497 break;
500 * case CPU_DEAD:
502 * When a CPU goes offline, don't free up or invalidate the copy of
503 * the microcode in kernel memory, so that we can reuse it when the
504 * CPU comes back online without unnecessarily requesting the userspace
505 * for it again.
509 /* The CPU refused to come up during a system resume */
510 if (action == CPU_UP_CANCELED_FROZEN)
511 microcode_fini_cpu(cpu);
513 return NOTIFY_OK;
516 static struct notifier_block __refdata mc_cpu_notifier = {
517 .notifier_call = mc_cpu_callback,
520 #ifdef MODULE
521 /* Autoload on Intel and AMD systems */
522 static const struct x86_cpu_id __initconst microcode_id[] = {
523 #ifdef CONFIG_MICROCODE_INTEL
524 { X86_VENDOR_INTEL, X86_FAMILY_ANY, X86_MODEL_ANY, },
525 #endif
526 #ifdef CONFIG_MICROCODE_AMD
527 { X86_VENDOR_AMD, X86_FAMILY_ANY, X86_MODEL_ANY, },
528 #endif
531 MODULE_DEVICE_TABLE(x86cpu, microcode_id);
532 #endif
534 static struct attribute *cpu_root_microcode_attrs[] = {
535 &dev_attr_reload.attr,
536 NULL
539 static struct attribute_group cpu_root_microcode_group = {
540 .name = "microcode",
541 .attrs = cpu_root_microcode_attrs,
544 static int __init microcode_init(void)
546 struct cpuinfo_x86 *c = &cpu_data(0);
547 int error;
549 if (c->x86_vendor == X86_VENDOR_INTEL)
550 microcode_ops = init_intel_microcode();
551 else if (c->x86_vendor == X86_VENDOR_AMD)
552 microcode_ops = init_amd_microcode();
553 else
554 pr_err("no support for this CPU vendor\n");
556 if (!microcode_ops)
557 return -ENODEV;
559 microcode_pdev = platform_device_register_simple("microcode", -1,
560 NULL, 0);
561 if (IS_ERR(microcode_pdev))
562 return PTR_ERR(microcode_pdev);
564 get_online_cpus();
565 mutex_lock(&microcode_mutex);
567 error = subsys_interface_register(&mc_cpu_interface);
568 if (!error)
569 perf_check_microcode();
570 mutex_unlock(&microcode_mutex);
571 put_online_cpus();
573 if (error)
574 goto out_pdev;
576 error = sysfs_create_group(&cpu_subsys.dev_root->kobj,
577 &cpu_root_microcode_group);
579 if (error) {
580 pr_err("Error creating microcode group!\n");
581 goto out_driver;
584 error = microcode_dev_init();
585 if (error)
586 goto out_ucode_group;
588 register_syscore_ops(&mc_syscore_ops);
589 register_hotcpu_notifier(&mc_cpu_notifier);
591 pr_info("Microcode Update Driver: v" MICROCODE_VERSION
592 " <tigran@aivazian.fsnet.co.uk>, Peter Oruba\n");
594 return 0;
596 out_ucode_group:
597 sysfs_remove_group(&cpu_subsys.dev_root->kobj,
598 &cpu_root_microcode_group);
600 out_driver:
601 get_online_cpus();
602 mutex_lock(&microcode_mutex);
604 subsys_interface_unregister(&mc_cpu_interface);
606 mutex_unlock(&microcode_mutex);
607 put_online_cpus();
609 out_pdev:
610 platform_device_unregister(microcode_pdev);
611 return error;
614 module_init(microcode_init);
616 static void __exit microcode_exit(void)
618 struct cpuinfo_x86 *c = &cpu_data(0);
620 microcode_dev_exit();
622 unregister_hotcpu_notifier(&mc_cpu_notifier);
623 unregister_syscore_ops(&mc_syscore_ops);
625 sysfs_remove_group(&cpu_subsys.dev_root->kobj,
626 &cpu_root_microcode_group);
628 get_online_cpus();
629 mutex_lock(&microcode_mutex);
631 subsys_interface_unregister(&mc_cpu_interface);
633 mutex_unlock(&microcode_mutex);
634 put_online_cpus();
636 platform_device_unregister(microcode_pdev);
638 microcode_ops = NULL;
640 if (c->x86_vendor == X86_VENDOR_AMD)
641 exit_amd_microcode();
643 pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
645 module_exit(microcode_exit);